PowerShell i Command Prompt su alati naredbenog retka ugrađeni u Windows , a oba su dostupna iz izbornika Power User^{(Power User Menu)} u sustavima Windows 10^{(Windows 10)} i Windows 8 . Međutim, možete koristiti taj izbornik za pristup samo jednom od njih u isto vrijeme, ovisno o tome kako je vaše računalo postavljeno.

Ako ste poput većine korisnika računala i skloni ste češćem otvaranju naredbenog retka^{(Command Prompt)} u odnosu na PowerShell , može biti od velike pomoći prisiliti izbornik Power User^{(Power User Menu)} da ponudi naredbeni redak^{(Command Prompt)} tako da ga možete jednostavno otvoriti u bilo kojem trenutku.

Zamjena PowerShell -a za naredbeni redak^{(Command Prompt)} jednostavan je i jednostavan zadatak. Ne morate znati ništa o naredbama podržanim u tim programima niti morate previše kopati u postavke sustava Windows^(Windows) da biste izvršili promjenu.

Sve što trebate učiniti je pristupiti postavkama programske trake i onemogućiti opciju PowerShell . Vraćanje postavke da biste se vratili na korištenje PowerShell -a iz izbornika Power User^{(Power User Menu)} , jednostavno je kao i poništavanje postavke.

Note: If you’re not familiar, the Power User Menu is accessible by right-clicking the Start button. You can also get there by executing the Win+X keyboard shortcut .

Promijenite PowerShell^{(Switch PowerShell)} i naredbeni redak^{(Command Prompt)}

Da biste uklonili PowerShell iz izbornika PowerShell^{(Power User Menu)} u korist naredbenog retka^{(Command Prompt)} , desnom tipkom miša kliknite prazno područje programske trake sustava Windows 10^{(Windows 10)} (izbornik koji sadrži sat i ikone otvorenih programa) i odaberite Postavke programske trake^{(Taskbar settings)} .

U sustavu Windows 8^{(Windows 8)} ne postoji takva opcija na programskoj traci. Umjesto toga, idite na Svojstva^(Properties) , ovako:

Kada se otvori prozor programske trake ^(Taskbar)sustava Windows 10 , ^{(Windows 10)} isključite^(Off) postavku koja se zove Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X .

Ako koristite Windows 8 , umjesto toga otvorite karticu Navigacija^(Navigation) i uklonite kvačicu pored Replace Command Prompt with Windows PowerShell in the menu when I right-click the lower-left corner or press Widows key+X .

Za Windows 10 , ne morate spremati promjene ili ponovno pokretati računalo da bi to stupilo na snagu. Samo^(Just) izađite iz prozora programske trake i desnom tipkom miša kliknite gumb ^(Taskbar)Start da biste vidjeli dvije nove opcije: naredbeni redak^{(Command Prompt)} i naredbeni redak (administrator)^{(Command Prompt (Admin))} .

Korisnici sustava Windows 8 trebali bi odabrati U redu^(OK) na prozoru svojstava programske trake kako bi spremili promjene.

Savjet: To možete poništiti u bilo kojem trenutku tako da tu postavku uključite (Windows 10) ili vratite potvrdni okvir (Windows 8), što će PowerShell staviti u izbornik PowerShell umjesto u naredbeni redak.^{(Tip: You can undo this at any time by turning that setting to the On position (Windows 10) or putting a check back in box (Windows 8), which will put PowerShell in the Power User Menu instead of Command Prompt.)}

Postoji li Windows 7 metoda?^{(Is There a Windows 7 Method?)}

Možda se pitate zašto ne spominjemo kako zamijeniti PowerShell i naredbeni redak^{(Command Prompt)} u sustavu Windows 7^{(Windows 7)} . Nažalost, ne postoji izbornik Power User Menu^{(Power User Menu)} ugrađen u Windows 7 jer je alat dostupan samo u sustavima Windows 10^{(Windows 10)} i Windows 8 .

Međutim, postoje programi trećih strana koje možete instalirati za Windows 7 i starije verzije sustava Windows koji vam omogućuju simuliranje izbornika Power User^{(Power User Menu)} . Jednom instaliran, možete desnom tipkom miša kliknuti program u području obavijesti sustava Windows 7 da biste vidjeli izbornik sličan izborniku Power User Menu i lako pristupili mnoštvu alata sustava uključujući naredbeni redak^{(Command Prompt)} .

Jedan takav program je WinPlusX . Radi na Windows 7 dolje do Windows XP .

Kao što možete vidjeti gore, WinPlusX pruža prečac ne samo do naredbenog retka^{(Command Prompt)} , već i do Notepad -a , uređivača registra^{(Registry Editor)} , pretraživanja^(Search) , mogućnosti napajanja^{(Power Options)} i još mnogo toga. Ako otvorite opcije programa, možete čak dodati vlastite prečace ili ukloniti bilo koji od već postojećih prečaca.

Je li ovo pravi izbornik Power User^{(Power User Menu)} za Windows 7 ? Ne baš, budući da jedan zapravo ne postoji. Međutim, radi gotovo jednako dobro i ne treba ga čak ni instalirati. Potpuno je prenosiv i sprema svoje promjene u Windows Registry .

Drugi načini za otvaranje naredbenog retka^{(Other Ways to Open Command Prompt)}

Korištenje izbornika Power User^{(Power User Menu)} za otvaranje naredbenog retka^{(Command Prompt)} zapravo je samo jedna od mnogih metoda za pokretanje alata naredbenog retka. Nekima je najlakše otvoriti ga putem izbornika, ali postoje i drugi načini za pokretanje naredbenog retka^{(other methods to launching Command Prompt)} koji bi vam se više sviđali.

Na primjer, možete izvršiti naredbu cmd u dijaloškom okviru Pokreni da biste brzo otvorili ^(Run)naredbeni redak^{(Command Prompt)} u bilo kojem trenutku.

Budući da je dijaloškom okviru Pokreni^(Run) dostupan brzi tipkovnički prečac^{(quick keyboard shortcut)} ( WIN+R ), možete vidjeti zašto je to preferirana metoda za neke ljude.

Drugi način da dođete do naredbenog retka^{(Command Prompt)} u sustavima Windows 10^{(Windows 10)} , Windows 8 ili Windows 7 je traženje naredbenog^{(command )} retka u izborniku Start . Vidjet ćete da se alat prikazuje u rezultatima, a možete pritisnuti Enter ili ga kliknuti/dodirnuti da biste ga pokrenuli.

Ovo je ujedno i najbolji način za otvaranje naredbenog retka administratora^{(Administrator command prompt)} , koji je potreban za obavljanje određenih zadataka u sustavu Windows^(Windows) .

Još jedan način je napraviti prečac na radnoj površini koji pokazuje na cmd , a zatim ga ili zadržati tamo ili ga prikvačiti na programsku traku za brzi prečac jednim klikom do naredbenog retka^{(Command Prompt)} .

Konačno, možete koristiti Upravitelj zadataka^{(Task Manager)} za otvaranje naredbenog retka^{(Command Prompt)} . Ova metoda je korisna ako se vaše računalo srušilo do te mjere da obični dijaloški okvir Pokreni^(Run) , radna površina i izbornik Start nisu vidljivi.

Samo idite na Datoteka^{(File )} > Pokreni novi zadatak^{(Run new task)} (ili Novi zadatak (Pokreni...)^{(New Task (Run…))} za Windows 7 ) da biste vidjeli okvir za tekst u koji možete unijeti cmd za pokretanje naredbenog retka.

Replace Command Prompt with PowerShell and Vice Versa in Windows 10

PowerShell and Command Prompt are command line tools built into Windows, and both are accessible from the Power User Menu in Windows 10 and Windows 8. However, you can use that mеnu to access only one of them at a time dependіng on how your computer is set υp.

If you’re like most computer users and tend to more often open Command Prompt versus PowerShell, it’s can be really helpful to force the Power User Menu to offer Command Prompt so that you can open it rather easily at any time.

Swapping PowerShell for Command Prompt is an easy and straightforward task. You don’t need to know anything about commands supported in those programs nor do you have to dig too deep into the Windows settings to make the change.

All you need to do is access the taskbar settings and disable the PowerShell option. Changing the setting back to return to using PowerShell from the Power User Menu, is as easy as reversing the setting.

Note: If you’re not familiar, the Power User Menu is accessible by right-clicking the Start button. You can also get there by executing the Win+X keyboard shortcut.

Switch PowerShell and Command Prompt

To remove PowerShell from the Power User Menu in favor of Command Prompt, right-click an empty area of the Windows 10 taskbar (the menu that holds the clock and open program icons) and choose Taskbar settings.

In Windows 8, there isn’t a taskbar option like that. Instead, go to Properties, like this:

When the Windows 10 Taskbar window opens, toggle to Off the setting called Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X.

If you’re using Windows 8, open the Navigation tab instead, and remove the check next to Replace Command Prompt with Windows PowerShell in the menu when I right-click the lower-left corner or press Widows key+X.

For Windows 10, you don’t have to save the changes or restart your computer for this to take effect. Just exit the Taskbar window and right-click the Start button to see two new options: Command Prompt and Command Prompt (Admin).

Windows 8 users should select OK on the taskbar properties window to save the changes.

Tip: You can undo this at any time by turning that setting to the On position (Windows 10) or putting a check back in box (Windows 8), which will put PowerShell in the Power User Menu instead of Command Prompt.

Is There a Windows 7 Method?

You might be wondering why we’re not mentioning how to swap PowerShell and Command Prompt in Windows 7. Unfortunately, there isn’t a Power User Menu built-in to Windows 7 because the tool is available in Windows 10 and Windows 8 only.

However, there are third-party programs you can install for Windows 7 and older versions of Windows that let you simulate the Power User Menu. Once installed, you can right-click the program in the notification area of Windows 7 to see a menu much like the Power User Menu, and easily access a wealth of system tools including Command Prompt.

One such program is WinPlusX. It works on Windows 7 down through Windows XP.

As you can see above, WinPlusX provides a shortcut to not only Command Prompt but also Notepad, Registry Editor, Search, Power Options, and more. If you open the program’s options, you can even add your own shortcuts or remove any of the pre-existing shortcuts.

Is this a true Power User Menu for Windows 7? Not really, since one doesn’t actually exist. However, it does work almost just as well and doesn’t even need to be installed. It’s entirely portable and saves its changes in the Windows Registry.

Other Ways to Open Command Prompt

Using the Power User Menu to open Command Prompt is really just one method among many for launching the command line tool. Some people find it easiest to open it with the menu but there are other methods to launching Command Prompt that you might prefer.

For example, you can execute the cmd command in a Run dialog box to quickly open Command Prompt at any time.

Since the Run dialog box is accessible with a quick keyboard shortcut (WIN+R), you can see why it’s a preferred method for some people.

Another way to get to Command Prompt in Windows 10, Windows 8, or Windows 7 is to search for command prompt in the Start menu. You’ll see the tool show up in the results, and you can press Enter or click/tap it to launch it.

This is also the best way to open an Administrator command prompt, which is needed when performing certain tasks in Windows.

Yet another way is to make a shortcut on your desktop that points to cmd, and then either keep it there or pin it to the taskbar for a quick, one-click shortcut to Command Prompt.

Finally, you can use Task Manager to open Command Prompt. This method is useful if your computer has crashed to the point that the regular Run dialog box, desktop, and Start menu are not visible.

Just go to File > Run new task (or New Task (Run…) for Windows 7) to see a text box where you can enter cmd to launch Command Prompt.

Related posts

• Zamijenite naredbeni redak s PowerShell u WinX izborniku sustava Windows 10

• Zamijenite Powershell naredbenom linijom u izborniku Start sustava Windows 10

• Zamijenite PowerShell naredbenim redkom u kontekstualnom izborniku u sustavu Windows 10

• Omogućite ili onemogućite naslijeđenu konzolu za naredbeni redak i PowerShell u sustavu Windows 10

• 8 značajki koje su nove u naredbenom retku i PowerShellu sustava Windows 10?

• Kako raditi s datotekama, mapama i aplikacijama u Bashu na Ubuntu na Windows 10

• Dodajte upravljačku ploču i naredbeni redak u WinX izbornik u sustavu Windows 10

• Kako koristiti naredbeni redak s karticama u sustavu Windows 10

• Pretvorite datoteku PowerShell skripte (PS1) u EXE pomoću IExpressa u sustavu Windows 10

• Kako onemogućiti WiFi koristeći CMD ili Powershell u sustavu Windows 10

• Kako dodati PowerShell u kontekstni izbornik u sustavu Windows 10

• Kako se prebacivati ​​između CMD-a i PowerShell-a u Windows terminalu

• Napredni naredbeni redak ili CMD trikovi za Windows 10

• Pristupite FTP poslužitelju pomoću naredbenog retka u sustavu Windows 10

• 5 načina za otvaranje povišenog naredbenog retka u sustavu Windows 10

• Pokrenite PowerShell skripte lokalno bez prijave u sustavu Windows 10

• Kako otvoriti preglednik Edge pomoću naredbenog retka u sustavu Windows 10

• Saznajte kada je Windows instaliran. Koji je njegov izvorni datum instalacije?

• Koji je model moje računalo, prijenosno računalo ili tablet sa sustavom Windows 10? 8 načina da saznate -

• Kako pronaći vrijeme neprekidnog rada sustava u sustavu Windows 10