Ako ste odjednom počeli primati pogrešku Planera zadataka — ^{(Task Scheduler)}Zadatak SvcRestartTask, XML zadatka sadrži neočekivani čvor^{(Task SvcRestartTask, The task XML contains an unexpected node)} — onda će vam ovaj post pomoći razumjeti problem i što možete učiniti u vezi s tim. Pogreška je sama po sebi razumljiva i samo znači da nešto nije u redu s XML formatom.

Zadatak SvcRestartTask: XML zadatak sadrži neočekivani čvor

Danas ćemo vam pokazati kako riješiti Neuspješno^(Failed) zakazivanje usluge Software Protection^{(Software Protection)} za ponovno pokretanje sa SvcRestartTask XML zadatka sadrži neočekivani čvor.

Ako se susrećete s ovim problemom, kada pogledate preglednik događaja^{(Event Viewer)} , vidjet ćete poruke poput one u nastavku:

Source: Microsoft-Windows-Security-SPP
Event ID: 16385
Failed to schedule Software Protection service for re-start at 2113-03-03T12:35:05Z. Error Code: 0x80041316.

U ovom slučaju, Windows^(Windows) mora ponovno izraditi zadatak i povezan je s Softverskom^(Software) zaštitnom platformom^(Platform) ili SPP -om . Prema Microsoftu^(Microsoft) , problem se može pojaviti iz sljedećih razloga:

• Usluga Task Scheduler je onemogućena.
• Usluga Platforme za zaštitu softvera^{(Software Protection Platform)} ne radi pod računom NETWORK SERVICE .
• U mapi SoftwareProtectionPlatform nedostaju dopuštenja za čitanje za NETWORK SERVICE račun^{(NETWORK SERVICE)}

Najprije otvorite Snap-in usluge^(Services) i provjerite radi li se usluga Task Scheduler . Ako ne, kliknite desnom tipkom miša i pokrenite ga. Ako je onemogućeno, obavezno ga postavite na Automatski^(Automatic) .

Drugo, provjerite radi li SPP pod računom MREŽNE USLUGE^{(NETWORK SERVICE)} .

• Otvorite alat za upravljanje računalom
• Idite na Konfiguracija^{(Configuration)} >  Planer^{(Task Scheduler)} zadataka >  Knjižnica planera zadataka^{(Task Scheduler Library)} >  Microsoft >  Windows >  SoftwareProtectionPlatform .
• Pronađite karticu Općenito^(General)  na  SoftwareProtectionPlatform ,
• Odaberite sigurnosne opcije
• Zatim provjerite je li usluga Platforme za zaštitu softvera^{(Software Protection Platform)} postavljena na korištenje računa NETWORK SERVICE .
• Ako nije, promijenite korisnički račun u Mrežna usluga^{(Network Service)} .
• Na kraju, provjerite nedostaje li dopuštenje za čitanje računa ^(Read)mrežne usluge .^{(Network Service)}

Nakon što ste to učinili, učinite sljedeće:

Use Win + E da otvorite Windows Explorer i dođite do sljedeće mape:

C:\Windows\System32\Tasks\Microsoft\Windows\SoftwareProtectionPlatform

Desnom tipkom miša kliknite^{(Right-click)} mapu i idite na karticu Svojstva^(Properties)

Provjerite ima li račun NETWORK SERVICE dopuštenja za čitanje za tu mapu.^(Read)

Ponovno pokrenite uslugu zaštite softvera^{(Software Protection Service)} ako je pokrenuta.

Iako Windows osigurava ažuriranje XML problema kada se ažuriranje dogodi, ova je određena pogreška povezana s dopuštenjem ili uslugom koja je prestala raditi.

XML zadatka sadrži neočekivanu pogrešku čvora – općenito rezoluciju^{(– Resolution)}

Svaka pogreška povezana s neočekivanim čvorom može se riješiti ako se XML datoteka ili način na koji je zadatak generiran mogu ažurirati na najnoviju verziju. Problem je uzrokovan ažuriranjem sustava Windows koje je promijenilo definiciju ^(Windows)XML zadatka. Ako za izradu zadatka koristite softver, morat ćete ga ponoviti. Morate ažurirati softver da biste generirali buduće zadatke na temelju najnovijeg standarda i neplanirali trenutni, a zatim ga ponovno rasporedili s novom verzijom.

Obično, tijekom ažuriranja, Planeri zadataka^{(Task Schedulers)} dobivaju ažuriranje, a promjene se unose u konfiguracijsku datoteku. Budući da su svi zadaci XML datoteke, ako dođe do promjena u postavkama konfiguracije, potrebno je ažuriranje zadataka. Postoji mnogo takvih povezanih pogrešaka, a većina ih se može popraviti ponovnim kreiranjem zadatka nakon ažuriranja softvera.

Nadam se da je objavu bilo lako pratiti i da ste uspjeli riješiti pogrešku Task SvcRestartTask .

Task SvcRestartTask: The task XML contains an unexpected node

Іf all of a sudden you have started receiving Task Scheduler error — Task SvcRestartTask, The task XML contains an unexpected node —then this post will help you understand the issue and what you can do about it. The error is self-explanatory, and it only means that there is something wrong with the XML format.

Task SvcRestartTask: The task XML contains an unexpected node

Today, we will show you how to resolve Failed to schedule Software Protection service for restart with SvcRestartTask The task XML contains an unexpected node.

If you are facing this issue, then when you look in the Event Viewer, you will see messages like the one below:

Source: Microsoft-Windows-Security-SPP
Event ID: 16385
Failed to schedule Software Protection service for re-start at 2113-03-03T12:35:05Z. Error Code: 0x80041316.

In this case, the task has to be recreated by Windows and is related to the Software protection Platform or SPP. According to Microsoft, the issue can occur because of the following reasons:

• The Task Scheduler service is disabled.
• The Software Protection Platform service isn’t running under the NETWORK SERVICE account.
• Read permissions for the NETWORK SERVICE account are missing on the SoftwareProtectionPlatform folder

First, open Services Snap-in, and check if the Task Scheduler service is running. If not, right-click on it, and start it. If it was disabled, make sure to set it to Automatic.

Second, check if SPP is running under the NETWORK SERVICE account.

• Open the Computer Management tool
• Navigate to Configuration > Task Scheduler > Task Scheduler Library > Microsoft > Windows > SoftwareProtectionPlatform.
• Locate the General tab of SoftwareProtectionPlatform,
• Select the security options
• Then verify that the Software Protection Platform service is set to use the NETWORK SERVICE account.
• If not, change the user account to Network Service.
• Lastly, check if the Read permission of the Network Service account is missing.

Having done that, do the following now:

Use Win + E to open Windows Explorer and browse to the following folder:

C:\Windows\System32\Tasks\Microsoft\Windows\SoftwareProtectionPlatform

Right-click on the folder, and go to the Properties tab

Verify that the NETWORK SERVICE account has Read permissions for that folder.

Restart the Software Protection Service if it’s running.

While Windows makes sure to update the XML issues when an update happens, this particular error is related to the permission or the service that has stopped running.

The task XML contains unexpected node error – Resolution in general

Any error related to an unexpected node can be resolved if the XML file or the way the task has been generated can be updated to the latest version. The issue is caused by a Windows update that has changed the XML task definition.  If you are using software to create the task, you will have to redo it. You need to update the software to generate future tasks based on the latest standard and unscheduled the current one, then re-scheduled with the new version.

Usually, during the update, Task Schedulers get an update, and changes are made to the configuration file. Since all tasks are XML files, if there is any change in the configuration settings, an update to the tasks is needed. There are many such related errors, and most of them can be fixed by recreating the task after updating the software.

I hope the post was easy to follow, and you were able to resolve the Task SvcRestartTask error.

Related posts

• Kako uvesti ili izvesti zadatke iz Planera zadataka u sustavu Windows 11/10

• Kako omogućiti ili onemogućiti zakazani zadatak u sustavu Windows 11/10

• Onemogućite telemetriju i prikupljanje podataka u sustavu Windows 10 pomoću Planera zadataka

• Kako izbrisati ili stvoriti zakazani zadatak pomoću PowerShell-a u sustavu Windows 11

• Kako onemogućiti zakazano skeniranje Update Orchestrator u sustavu Windows 10

• Uklonite više procesa ili završite nekoliko zadataka u sustavu Windows 11/10

• Ažurirajte Windows Defender kada je automatsko ažuriranje onemogućeno

• Kako otvoriti XML datoteku i za što se koriste

• Otvorite i upotrijebite Chromeov upravitelj zadataka u sustavu Windows 11/10

• Kako zakazati točke vraćanja sustava u sustavu Windows 11/10

• 9 načina za pokretanje Task Scheduler u sustavu Windows (sve verzije)

• Kako zadržati Upravitelj zadataka uvijek na vrhu u sustavu Windows 11/10

• Kako koristiti Firefox Task Manager

• Koristite Windows 10 Task Scheduler za automatizaciju gotovo svega

• Popravite neispravan planer zadataka u sustavu Windows 10

• Kako prikazati naredbeni redak u Upravitelju zadataka sustava Windows 11/10

• Kako provjeriti radi li se proces kao administrator u sustavu Windows 11/10

• Planer zadataka ne pokreće ili ne pokreće programe u sustavu Windows 11/10

• Potrošnja CPU-a narasla na 100% pri otvaranju Upravitelja zadataka

• Kako provjeriti XML u odnosu na XSD u Notepad++