Neki od korisnika su se žalili da WslRegisterDistribution nije uspio s pogreškom 0x800700b7^{(WslRegisterDistribution failed with error 0x800700b7 )} ili 0x80080005 , što se ponekad događa nakon ponovnog pokretanja računala. Pojavljuje se kada se pokrene Ubuntu ili bilo koji drugi Dextro . Ovaj će vam post pomoći riješiti problem. Ovdje je kompletna poruka o pogrešci:

Instalacija može potrajati nekoliko minuta...
WslRegisterDistribution nije uspio s pogreškom: 0x800700b7/0x80080005
Instalacija distribucije je oštećena.
Odaberite^(Please) Reset iz postavki ^(Reset)aplikacije^{(App Settings)} ili deinstalirajte i ponovno instalirajte aplikaciju.
Pogreška: 0x800700b7 Ne mogu stvoriti datoteku kada ta datoteka već postoji.
Pritisni bilo koju tipku za nastavak…

WslRegisterDistribution nije uspio s pogreškom 0x800700b7 ili 0x80080005

Rješenje je prilično jednostavno i uključuje ponovno pokretanje  dostupnog LxssManagera^{(LxssManager)} i drugih usluga u sustavu Windows^(Windows) . WSL sadrži dva načina rada—Korisnički način rada^(Mode) i Kernel Mode , uključujući  Bash, LxssManager, Lxss.sys i lxcore.sys. ^{( Bash, LxssManager, Lxss.sys, and lxcore.sys.)} LxssManager je usluga upravitelja sesija u korisničkom načinu rada koja pokreće novu instancu WSL -a . Evo što kaže opis:

The LXSS Manager service supports running native ELF binaries. The service provides the infrastructure necessary for ELF binaries to run on Windows. If the service is stopped or disabled, those binaries will no longer run.

Ponovno pokrenite LxssManager Service

Pritisnite^(Press) tipku Windows i upišite cmd dok se na popisu ne pojavi naredbeni redak^{(Command Prompt)} . Desnom tipkom miša kliknite na njega i odaberite Pokreni kao administrator. ^{(choose to Run as administrator.)}Zatim upišite sljedeću naredbu.

sc query LxssManager
sc stop LxssManager
sc start LxssManager

Kada završite, pokrenite WSL i to vam ne bi trebalo predstavljati nikakav problem. Međutim, to se može dogoditi svaki put kada ponovno pokrenete računalo. Kako biste bili sigurni da se to ne događa svaki put, izvedite sljedeću naredbu.

sc config LxssManager start=auto

Sljedeći put, kada pokrenete računalo i pokrenete WSL , to ne bi trebao biti problem.

Postavite automatsko pokretanje LxssManagera^{(Set LxssManager Auto-Start)} pomoću Registra^(Registry)

U slučaju da niste u mogućnosti promijeniti tipkanje za pokretanje servisa pomoću gore navedene naredbe, možete ga promijeniti putem registra. Pogreška se javlja ako je usluga već u upotrebi, a vi ste je pokušavali promijeniti.

• Otvorite Run prompt, upišite regedit i pritisnite tipku Enter
• U uređivaču registra^{(Registry Editor)} idite na sljedeći put.

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LxssManager\Start

• Dvaput kliknite^{(Double-click)} na tipku Start za otvaranje u načinu uređivanja. Postavite vrijednost kao 2 i spremite je.

Ovo će osigurati da je LxssManager postavljen na automatski.

Nadam se da je objavu bilo lako pratiti i da ste pomoću ovog savjeta uspjeli riješiti pogrešku WslRegisterDistribution nije uspjela 0x80080005 ili 0x800700b7. Pogrešku je jednostavno riješiti i sve dok možete postaviti uslugu da se automatski pokreće, trebali biste je moći popraviti.

Slična WslRegisterDistribution nije uspjela s pogreškama^{(Similar WslRegisterDistribution failed with errors)} :  0xc03a001a | 0x80041002 | 0x80070422 | 0x80370114 | 0x80370102 | 0x80070003 |  0x80070032 | 0x8007023e | 0x800701bc | 0x8007019e i 0x8000000d^{(0x8007019e and 0x8000000d)} .

WslRegisterDistribution failed with error 0x800700b7 or 0x80080005

Some of the users have complained about WslRegisterDistribution failed with error 0x800700b7 or0x80080005, which sometimes happens after the computer reboots. It shows up when Ubuntu or any other Dextro is launched. This post will help you resolve the problem. Here is the complete error message:

Installing, this may take a few minutes…
WslRegisterDistribution failed with error: 0x800700b7/0x80080005
The distribution installation has become corrupted.
Please select Reset from App Settings or uninstall and reinstall the app.
Error: 0x800700b7 Cannot create a file when that file already exists.
Press any key to continue…

WslRegisterDistribution failed with error 0x800700b7 or 0x80080005

The resolution is fairly simple, and it involves restarting the LxssManager available and other services in Windows. WSL contains two modes—User Mode and Kernel Mode, including Bash, LxssManager, Lxss.sys, and lxcore.sys. LxssManager is a user-mode session manager service that launches a new instance of WSL. Here is what the description says:

The LXSS Manager service supports running native ELF binaries. The service provides the infrastructure necessary for ELF binaries to run on Windows. If the service is stopped or disabled, those binaries will no longer run.

Restart LxssManager Service

Press the Windows key, and type cmd until the Command Prompt appears in the list. Right-click on it, and choose to Run as administrator. Then type the following command.

sc query LxssManager
sc stop LxssManager
sc start LxssManager

Once done, launch WSL, and it should not give you any problem. However, this may happen every time you restart the computer. To make sure it doesn’t happen every time, execute the following command.

sc config LxssManager start=auto

Next time, when you start the computer and launch WSL, it should not be an issue.

Set LxssManager Auto-Start using Registry

In case you are not able to change the service startup typing using the above-mentioned command, you can change it through the registry. The error occurs if the service is already in use and you were trying to change it.

• Open Run prompt, and type regedit, and press the Enter key
• In the Registry Editor, navigate to the following path.

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LxssManager\Start

• Double-click on the Start key to open in edit mode. Set the value as 2, and save it.

This will make sure the LxssManager is set to automatic.

I hope the post was easy to follow, and you were able to resolve the WslRegisterDistribution failed error 0x80080005 or 0x800700b7 using this tip. The error is simple to resolve, and as long as you can set the service to launch automatically, you should be able to fix it.

Similar WslRegisterDistribution failed with errors: 0xc03a001a | 0x80041002 | 0x80070422 | 0x80370114 | 0x80370102 | 0x80070003 |  0x80070032 | 0x8007023e | 0x800701bc | 0x8007019e and 0x8000000d.

Related posts

• WslRegisterDistribution nije uspio s pogreškom: 0x80370114

• WslRegisterDistribution nije uspio s pogreškom 0x8007023e

• WslRegisterDistribution nije uspio s pogreškom 0x8007019e ili 0x8000000d

• WslRegisterDistribution nije uspio s pogreškom: 0x800701bc

• WslRegisterDistribution nije uspio s pogreškom: 0x80070422

• Popravak WslRegisterDistribution nije uspio s pogreškom 0x80070032

• Kako postaviti verziju distribucije Linuxa na WSL1 ili WSL2 u sustavu Windows 10

• Popravite pogreške, probleme i probleme Windows podsustava za Linux

• Kako pokrenuti datoteku .sh ili Shell Script u sustavu Windows 11/10

• WslRegisterDistribution nije uspio s pogreškom: 0x80041002

• WslRegisterDistribution nije uspio s pogreškom: 0x80370102

• Kako provjeriti verziju podsustava Windows za Linux (WSL) u sustavu Windows

• Izgradite LineageOS na Windows 10 koristeći Windows podsustav za Linux

• WSL je prestao raditi s pogreškom 0x80070003

• Kako instalirati Windows podsustav za Linux na Windows 11

• WslRegisterDistribution nije uspio s pogreškom 0xc03a001a