Popravite Windows ne može se povezati s pisačem: ^{(Fix Windows Cannot Connect to the Printer: )} Ako ste spojeni na lokalnu mrežu koja dijeli pisač, možda ćete dobiti poruku o pogrešci “ Windows se ne može povezati s pisačem. Operacija nije uspjela s pogreškom 0x000000XX^{(Windows cannot connect to the printer. Operation failed with error 0x000000XX)} †dok pokušavate dodati zajednički pisač na vaše računalo pomoću značajke Dodaj pisač . ^{(Add Printer)}Do ovog problema dolazi jer, nakon što je pisač instaliran, Windows 10 ili Windows 7 pogrešno traži datoteku Mscms.dll u podmapi koja se razlikuje od podmape windows\system32.

Sada već postoji Microsoftov^(Microsoft) hitni popravak za ovaj problem, ali čini se da ne funkcionira za mnoge korisnike. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti Windows^{(Fix Windows)} ne može se povezati s pisačem^(Printer) u sustavu Windows 10^{(Windows 10)} s dolje navedenim vodičem za rješavanje problema.

Napomena:^(Note:) Možete prvo isprobati Microsoftov hitni popravak^{(Microsoft hotfix)} , samo u slučaju da vam ovo radi, uštedjet ćete puno vremena.

Windows se ne može povezati s pisačem [RIJEŠENO]

Obavezno  stvorite točku vraćanja^{(create a restore point)} u slučaju da nešto pođe po zlu.

Metoda 1: Kopirajte mscms.dll^{(Method 1: Copy the mscms.dll)}

1. Idite do sljedeće mape: C:\Windows\system32\

2. Pronađite mscms.dll u gornjem direktoriju i kliknite desnom tipkom miša, a zatim odaberite kopiraj.^{(select copy.)}

3. Sada zalijepite gornju datoteku na sljedeće mjesto u skladu s arhitekturom vašeg računala:

C:\windows\system32\spool\drivers\x64\3\ (For 64-bit)
C:\windows\system32\spool\drivers\w32x86\3\ (For 32-bit)

4. Ponovno pokrenite računalo da biste spremili promjene i ponovno se pokušajte ponovno povezati s udaljenim pisačem.

Ovo bi vam trebalo pomoći  popraviti problem Windows ne može se povezati s pisačem,  ^{(Fix Windows Cannot Connect to the Printer issue,  )} ako ne, nastavite.

Metoda 2: Stvorite novi lokalni port^{(Method 2: Create A New Local Port)}

1. Pritisnite Windows Key + X , a zatim odaberite Upravljačka ploča.^{(Control Panel.)}

2. Sada kliknite Hardver i zvuk,^{(Hardware and Sound)} a zatim kliknite na Uređaji i pisači.^{(Devices and Printers.)}

3.Kliknite Dodaj pisač^{(Add a printer)} na gornjem izborniku.

4. Ako ne vidite svoj pisač na popisu, kliknite vezu koja kaže „ Pisač koji želim nije naveden. ^{(The printer that I want isn’t listed.)}“

5. Na sljedećem zaslonu odaberite " Dodaj lokalni pisač ili mrežni pisač s ručnim postavkama^{(Add a local printer or network printer with manual settings)} " i kliknite Dalje.

6.Odaberite Create a new port , a zatim iz padajućeg izbornika vrste porta odaberite Local Port , a zatim kliknite Next.

7.Upišite adresu pisača u polje Printers port name u sljedećem formatu:

\\IP address or the Computer Name\Printers Name

Na primjer \\192.168.1.120\HP LaserJet Pro M1136

8. Sada kliknite OK, a zatim kliknite Next.

9. Slijedite upute na zaslonu da biste završili postupak.

Metoda 3: Ponovno pokrenite Print Spooler Service^{(Method 3: Restart Print Spooler Service)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Na popisu pronađite uslugu Print Spooler^{( Print Spooler service)} i dvaput kliknite na nju.

3. Provjerite je li tip pokretanja^(Startup) postavljen na Automatski^(Automatic) i da je usluga pokrenuta, zatim kliknite Stop i zatim ponovno kliknite na Start kako biste ponovno pokrenuli uslugu.^{(restart the service.)}

4. Kliknite Primijeni, a zatim OK.

5. Nakon toga, ponovno pokušajte dodati pisač i provjerite jeste li u mogućnosti  popraviti problem Windows ne može se povezati s pisačem.^{(Fix Windows Cannot Connect to the Printer issue.)}

Metoda 4: Izbrišite nekompatibilne upravljačke programe pisača^{(Method 4: Delete Incompatible Printer Drivers)}

1. Pritisnite tipku Windows + R zatim upišite printmanagement.msc i pritisnite Enter.

2. U lijevom oknu kliknite Svi upravljački programi.^{(All Drivers.)}

3. Sada u desnom oknu prozora, desnom tipkom miša kliknite upravljački program pisača i kliknite Izbriši.^{(click Delete.)}

4. Ako vidite više od jednog naziva upravljačkog programa pisača, ponovite gornje korake.

5. Ponovno pokušajte dodati pisač^{(Again try to add the printer)} i instalirati njegove upravljačke programe. Provjerite jeste li u mogućnosti da  popravite problem s Windows ne može se povezati s pisačem, ^{(Fix Windows Cannot Connect to the Printer issue, )} ako ne, nastavite sa sljedećom metodom.

Metoda 5: popravak registra^{(Method 5: Registry Fix)}

1. Prvo morate zaustaviti uslugu Printer Spooler^{(stop Printer Spooler service)} (pogledajte metodu 3).

2. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

3. Dođite do sljedećeg ključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider

4. Sada desnom tipkom miša kliknite na Client Side Rendering Print Provider i odaberite Delete.

5. Sada ponovno pokrenite Printer Spooler uslugu i ponovno pokrenite računalo da biste spremili promjene.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravite pogrešku ažuriranja sustava Windows 10 0x8007042c^{(Fix Windows 10 Update Error 0x8007042c)}
• Popravite pogrešku Windows Update 0x80010108^{(Fix Windows Update Error 0x80010108)}
• Kako popraviti pogrešku 0X80010108 u sustavu Windows 10^{(How To Fix Error 0X80010108 In Windows 10)}
• Popravite pogrešku Windows Update 0x800706d9^{(Fix Windows Update Error 0x800706d9)}

To je to što ste uspješno riješili problem s Windows ne može se povezati s pisačem,^{(Fix Windows Cannot Connect to the Printer issue)} ali ako i dalje imate bilo kakvih pitanja u vezi s ovim člankom, slobodno ih postavite u odjeljku za komentare.

Windows Cannot Connect to the Printer [SOLVED]

Fix Windows Cannot Connect to the Printer: If you are connected to a local network which shares a printer, it may be possible you may receive the error message “Windows cannot connect to the printer. Operation failed with error 0x000000XX” while trying to add the shared printer to your computer using Add Printer feature. This issue occurs because, after the printer is installed, Windows 10 or Windows 7 incorrectly looks for the Mscms.dll file in a subfolder different than the windows\system32 subfolder.

Now there is alreadya Microsoft hotfix for this issue but it doesn’t seem to work for many users. So without wasting any time let’s see how to actually Fix Windows Cannot Connect to the Printer on Windows 10 with the below-listed troubleshooting guide.

Note: You could try the Microsoft hotfix first, just in case if this work for you then you will save a lot of time.

Windows Cannot Connect to the Printer [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Copy the mscms.dll

1.Navigate to the following folder: C:\Windows\system32\

2.Find the mscms.dll in the above directory and right-click then select copy.

3.Now paste the above file in the following location according to your PC architecture:

C:\windows\system32\spool\drivers\x64\3\ (For 64-bit)
C:\windows\system32\spool\drivers\w32x86\3\ (For 32-bit)

4.Reboot your PC to save changes and again try to connect to the remote printer again.

This should help you Fix Windows Cannot Connect to the Printer issue,  if not then continue.

Method 2: Create A New Local Port

1.Press Windows Key + X then select Control Panel.

2.Now click Hardware and Sound then click on Devices and Printers.

3.Click Add a printer from the top menu.

4.If you don’t see you printer listed click the link which says “The printer that I want isn’t listed.“

5.From the next screen select “Add a local printer or network printer with manual settings” and click Next.

6.Select Create a new port and then from type of port drop-down select Local Port and then click Next.

7.Type the printer’s address in Printers port name field in the following format:

\\IP address or the Computer Name\Printers Name

For example \\192.168.1.120\HP LaserJet Pro M1136

8.Now click OK and then click Next.

9.Follow on-screen instructions to finish the process.

Method 3: Restart Print Spooler Service

1.Press Windows Key + R then type services.msc and hit Enter.

2.Find Print Spooler service in the list and double-click on it.

3.Make sure the Startup type is set to Automatic and the service is running, then click on Stop and then again click on start in order to restart the service.

4.Click Apply followed by OK.

5.After that, again try to add the printer and see if the you’re able to Fix Windows Cannot Connect to the Printer issue.

Method 4: Delete Incompatible Printer Drivers

1.Press Windows key + R then type printmanagement.msc and hit Enter.

2.From the left pane, click All Drivers.

3.Now in the right window pane, right-click on the printer driver and click Delete.

4.If you see more than one printer driver names, repeat the above steps.

5.Again try to add the printer and install its drivers. See if you are able to Fix Windows Cannot Connect to the Printer issue, if not then continue with the next method.

Method 5: Registry Fix

1.First, you need to stop Printer Spooler service (Refer to method 3).

2.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

3.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider

4.Now right-click on Client Side Rendering Print Provider and select Delete.

5.Now again start Printer Spooler service and reboot your PC to save changes.

Recommended for you:

• Fix Windows 10 Update Error 0x8007042c
• Fix Windows Update Error 0x80010108
• How To Fix Error 0X80010108 In Windows 10
• Fix Windows Update Error 0x800706d9

That’s it you have successfully Fix Windows Cannot Connect to the Printer issue but if you still have any questions regarding this article then feel free to ask them in comment’s section.

Related posts

• Zadani pisač se stalno mijenja [RJEŠENO]

• Zamrzavanje indeksa iskustva u sustavu Windows [RIJEŠENO]

• USB uređaj ne radi u sustavu Windows 10 [RIJEŠENO]

• Dodajte pisač u sustav Windows 10 [VODIČ]

• Pogreška 1962: Operativni sustav nije pronađen [RIJEŠENO]

• Kod pogreške u trgovini Windows 0x8000ffff [RJEŠENO]

• Pogreška NVIDIA Installer nije uspjela na Windows 10 [RJEŠENO]

• Windows 10 Creator Update ne uspijeva instalirati [RJEŠENO]

• Tipkovnica prijenosnog računala ne radi ispravno [RIJEŠENO]

• USB portovi ne rade u sustavu Windows 10 [RIJEŠENO]

• Problem s ograničenim WiFi povezivanjem [RJEŠENO]

• Opcija Pin to Start Menu Nedostaje u Windows 10 [RJEŠENO]

• Windows 10 neće pamtiti spremljenu WiFi lozinku [RIJEŠENO]

• Aplikacija za fotografije se stalno ruši u sustavu Windows 10 [RIJEŠENO]

• Datoteka je prevelika za odredišni datotečni sustav [RJEŠENO]

• Miš i tipkovnica ne rade u sustavu Windows 10 [RIJEŠENO]

• Pogreška oštećenja baze podataka Windows Update [RJEŠENO]

• Popravite kako se Windows 10 ne pokreće s USB-a [RJEŠENO]

• Akcijski centar ne radi u sustavu Windows 10 [RIJEŠENO]

• Windows nije mogao pronaći upravljački program za vaš mrežni adapter [RIJEŠENO]