Ako kada instalirate, deinstalirate ili ažurirate program na Windows računalu, dobijete poruku o pogrešci i ne možete dovršiti instalaciju, onda bi vas ovaj članak mogao zanimati.

Ispravite^{(Fix Windows Installer Package)} pogreške paketa Windows Installer

Mogli biste primiti bilo koju od sljedećih poruka o pogrešci :^(es:)

• Windows Installer Service nije se mogao pokrenuti.

• Nije bilo moguće pristupiti usluzi Windows Installer.

• Nije moguće pokrenuti uslugu Windows Installer na lokalnom računalu.

To se može dogoditi ako je Windows Installer Engine oštećen, nepravilno instaliran ili onemogućen. U tom slučaju, možda ćete htjeti isprobati jedan ili više od sljedećih koraka za rješavanje problema:

1] Prijavite se kao administrator

Provjerite jeste li prijavljeni kao administrator . Ako se ne prijavite kao administrator^(Admin) i pokušajte ponovo.

2] Otvara li se msiexec?

Otvorite prozor naredbenog retka, upišite msiexeci pritisnite Enter . Ako se otvori sljedeći prozor, u redu.

Ako umjesto toga primite poruku o pogrešci, zabilježite je i pokušajte je potražiti na Internetu^(Internet) .

Usput, ovdje ćete moći vidjeti sve prekidače naredbenog retka. Usput, ne može se pokrenuti program msiexec.exe bez navođenja barem jednog prekidača.

3] Provjerite status usluge Windows Installer^{(Check Windows Installer)}

Otvorite services.msc i provjerite je li usluga Windows Installer^{(Windows Installer service)} postavljena na Ručno^(Manual) . Ako se ne pokrene, pokrenite ga i pokušajte ponovno^{(please start it and try again)} .

4] Ponovno registrirajte^{(Re-register)} motor Windows^{(Windows Installer)} Installer

Otvorite prozor naredbenog retka i upišite sljedeće naredbe jednu za drugom i pritisnite Enter:

msiexec /unregister

msiexec /regserver

Ovo će ponovno registrirati sustav Windows Installer .

5 ] Deinstalirajte^{(] Uninstall)} i ponovno instalirajte program

Ako pokušavate ažurirati softverski program na računalu s ažuriranom verzijom, prvo deinstalirajte prethodnu verziju tog programa, a zatim instalirajte ažuriranu verziju.

6] Pokrenite alat za rješavanje problema instaliranja^{(Run Program Install)} i deinstaliranja programa^{(Uninstall Troubleshooter)}

Pokrenite alat za rješavanje problema instaliranja i deinstalacije programa . Ovaj alat je zamjena za  uslužni program Windows Installer Cleanup koji je ukinut. Ovaj alat pomoći će vam riješiti potencijalne probleme s Windows Installerom^{(Windows Installer)} .

Točnije, riješit će sljedeće probleme:

1. Problemi koji sprječavaju instaliranje, deinstaliranje ili ažuriranje novih programa
2. Oštećeni ključevi registra koji su povezani s ovim problemima.

Ovaj alat za rješavanje problema radi na Windows 10/8.1/8/7 .

7] Pokrenite provjeru sistemskih datoteka

Pokrenite System File Checker , ponovno pokrenite sustav ako se to zatraži i pokušajte ponovno.

Pročitajte^(Read) :  Nedostaje usluga Windows Installer^{(Windows Installer Service missing)} .

8] Poništite postavke registra usluge Windows Installer^{(Reset Windows Installer Service Registry)}

Vratite postavke registra usluge Windows Installer^{(Windows Installer Service Registry)} na zadane vrijednosti. Preuzmite ovaj popravak registra koji se spominje u KB2642495 i dodajte ga u svoj registar. Najprije stvorite točku vraćanja sustava^{(system restore point)} prije primjene ovog popravka registra.

Za korisnike 64-bitnog sustava Windows otvorite ^(Windows)uređivač registra^{(Registry Editor)} i idite do sljedeće tipke:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer

Odaberite unos WOW64 REG_DWORD u desnom oknu.

Desnom tipkom miša kliknite ^{(Right-click)}unos WOW64^(WOW64) i odaberite Izmijeni^(Modify) .

Promijenite decimalnu vrijednost iz 1 u 0 i pritisnite OK i ponovno pokrenite sustav.

Povezano glasi:^{(Related reads:)}

1. Pogreška za pristup odbijen prilikom instaliranja softvera na Windows
2. Windows Installer se iskače nasumično
3. Ovaj instalacijski paket nije moguće otvoriti^{(This installation package could not be opened)} .
   

Želite li znati kako učiniti da Windows Installer radi u sigurnom načinu rada ?^{(Want to know how to make Windows Installer work in Safe Mode?)}

The Windows Installer Service could not be accessed or started

If when you install, uninstall, or update a program on a Windows computer, you receive an error message and you are unable to complete the installation, then this article may interest you.

Fix Windows Installer Package errors

You could receive any of the following error messages:

• Windows Installer Service couldn’t be started.

• The Windows Installer Service could not be accessed.

• Could not start the Windows Installer service on Local Computer.

This could happen if the Windows Installer Engine is corrupted, installed incorrectly, or disabled. In such a case, you may want to try one or more of the following troubleshooting steps:

1] Log in as Administrator

Please ensure that you are logged in as Administrator. If not log in as Admin and try again.

2] Does msiexec open?

Open a command prompt window, type msiexec and hit Enter. If the following window opens, fine.

If you receive an error message instead, note down the error message and try to search for it on the Internet.

Incidentally, you will be able to see all the command-line switches here. One cannot, by the way, run the msiexec.exe program without specifying at least one switch.

3] Check Windows Installer service status

Open services.msc and ensure that the Windows Installer service is set to Manual. If it is not started, please start it and try again.

4] Re-register the Windows Installer engine

Open the command prompt window and type the following commands one after the other and hit Enter:

msiexec /unregister

msiexec /regserver

This will re-register the Windows Installer engine.

5] Uninstall & reinstall the program

If you are trying to update a software program on your computer with an updated version, uninstall the previous version of that program first, and then install the updated version.

6] Run Program Install and Uninstall Troubleshooter

Run the Program Install and Uninstall Troubleshooter. This tool is the replacement for Windows Installer Cleanup utility which was discontinued. This tool will help you fix potential issues with Windows Installer.

Specifically, it will fix the following problems:

1. Problems that prevent new programs from being installed, uninstalled or updated
2. Corrupted registry keys that are related to these issues.

This troubleshooter works on Windows 10/8.1/8/7.

7] Run System File Checker

Run System File Checker, reboot if asked for and try again.

Read: Windows Installer Service missing.

8] Reset Windows Installer Service Registry settings

Reset the Windows Installer Service Registry settings to its default values. Download this registry fix mentioned in KB2642495 and add it to your registry. Do create a system restore point first before applying this registry fix.

For Windows 64-Bit users, open Registry Editor and navigate to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer

Select WOW64 REG_DWORD entry in the right pane.

Right-click on WOW64 entry and select Modify.

Change the Decimal value from 1 to 0 and press OK and reboot the system.

Related reads:

1. Access is Denied error while installing software on Windows
2. Windows Installer keeps popping up randomly
3. This installation package could not be opened.
   

Want to know how to make Windows Installer work in Safe Mode?

Related posts

• Usluga Windows Installer nedostaje u Services Manageru u sustavu Windows 11/10

• Kako omogućiti ili onemogućiti uslugu Windows Installer u sustavu Windows 11/10

• Windows Installer ne radi ispravno u sustavu Windows 11/10

• Postoji problem s ovim Windows Installer paketom [popravljeno]

• Kako omogućiti prijavu programa Windows Installer u sustavu Windows 10

• Nešto je pošlo po zlu, OOBESETTINGS tijekom postavljanja sustava Windows

• Kako omogućiti ili onemogućiti Print Spooler Service u sustavu Windows 11/10

• Windows OOBE ne uspijeva s pogreškom koja uzrokuje nepotpuno postavljanje

• Popravite pogreške prilikom instalacije, ažuriranja ili nadogradnje sustava Windows

• Popravite kôd pogreške instalacije sustava Windows 0x80070006

• DHCP Client Service daje pogrešku Pristup odbijen u sustavu Windows 11/10

• Windows Event Log Service se ne pokreće ili je nedostupna

• Kako instalirati Windows 11/10 s Android telefona pomoću DriveDroida

• Kako koristiti značajku Fresh Start u sustavu Windows 10

• Ne mogu instalirati Discord, instalacija nije uspjela na Windows računalu

• Kako zaustaviti daljinsku instalaciju aplikacija na Windows 10

• Kako instalirati Windows 11/10 s USB-a: Vodič za snimku zaslona

• Pogreška 0xC1900101-0x40017, instalacija nije uspjela u fazi SECOND_BOOT

• Kako uključiti bilježenje otklanjanja pogrešaka u usluzi Windows Time Service

• Instalacija Windows Update s kodom pogreške 0x8024200D nije uspjela