Vatrozid sustava Windows^{(Windows Firewall)} djeluje kao prvi sloj obrane od zlonamjernog softvera, stoga je preporučljivo da ga uvijek držite uključenim – osim ako ne koristite softver vatrozida treće strane. Ako iz nekog nepoznatog razloga otkrijete da se vaš Windows vatrozid^(Firewall) ne pokreće automatski pri pokretanju, evo nekoliko koraka za rješavanje problema koje biste mogli isprobati.

Usluga Windows vatrozida^{(Windows Firewall)} se ne pokreće

Poruke o pogrešci koje biste mogli primiti su:

• Windows vatrozid^{(Windows Firewall)} nije zadani vatrozid
• Windows vatrozid se ne pokreće
• Windows nije mogao pokrenuti Windows vatrozid

Ako se Windows vatrozid^{(Windows Firewall)} ne pokrene, ostale pogreške koje možete vidjeti na svom Windows sustavu su:

1. Usluga Windows vatrozida^{(Windows Firewall)} prekinuta je s greškom 87 specifičnom za uslugu (0x57)
2. Pogreška 0x80004015: Klasa je konfigurirana za pokretanje kao sigurnosni ID različit od pozivatelja.
3. Usluga Windows vatrozida^{(Windows Firewall)} prekinuta je s greškom specifičnom za uslugu 6801 (0x1A91).
4. ID događaja: 7024 – Usluga Windows vatrozida^{(Windows Firewall)} prekinuta je s greškom 5 specifičnom za uslugu (0x5)
5. Windows nije mogao pokrenuti uslugu Base Filtering Engine na lokalnom računalu^{(Local Computer)} . Pogreška 5: Pristup je odbijen.
6. Windows nije mogao pokrenuti uslugu IPsec Policy Agent na lokalnom računalu^{(Local Computer)} . Pogreška 1068: Usluga ovisnosti ili grupa nije uspjela pokrenuti^{(The dependency service or group failed to start)} .
7. Windows nije mogao pokrenuti Network Location Awareness na lokalnom računalu^{(Local Computer)} .
8. “net start mpssvc” u cmd.exe vraća sistemsku pogrešku 1297.

Predlažemo da pokušate riješiti sljedeće probleme:

1. Skenirajte za zlonamjerni softver
2. Pokrenite SFC i DISM
3. Provjerite status usluge vatrozida
4. Provjerite status upravljačkog programa koji se odnosi na vatrozid^{(Firewall-related Driver)}
5. Pokrenite alat za rezultate grupne politike
6. Pokrenite alat za rješavanje problema s vatrozidom Windows
7. Poništite postavke Windows vatrozida.

1] Skenirajte za zlonamjerni softver

Najprije skenirajte svoj uređaj na zlonamjerni softver pomoću dobrog antivirusnog softvera. Ako ste instalirali vatrozid treće strane ili sigurnosni paket^{(Security Suite)} , onda bi to također mogao biti uzrok problema. Mnogo puta sigurnosni softver treće strane može onemogućiti Windows vatrozid^{(Windows Firewall)} , pa čak i spriječiti njegovo pokretanje.

2] Pokrenite SFC i DISM

Pokrenite provjeru sistemskih datoteka ili sfc /scannow . Možda ćete također htjeti pokrenuti DISM^{(Run DISM)} i vidjeti hoće li to pomoći.

3] Provjerite status usluga vatrozida

Zatim upišite services.msc u Windows Pokreni pretraživanje^{(Windows Start Search)} i pritisnite Enter da otvorite Usluge^(Services) . Ovdje provjerite je li usluga Windows vatrozida^{(Windows Firewall Service)} pokrenuta i postavljena na Automatski^(Automatic) . To činite klikom na gumb Start . Također, provjerite jesu li usluga poziva udaljenog postupka^{(Remote Procedure Call Service)} i usluga motora osnovnog filtriranja^{(Base Filtering Engine Service)} pokrenute i postavljene na Automatski.

4] Provjerite^{(Check Firewall-related Driver)} status upravljačkog programa koji se odnosi na vatrozid

Sada također morate osigurati da upravljački program za autorizaciju Windows vatrozida^{(Windows Firewall Authorization Driver)} (mdsdrv.sys) radi ispravno.

Da biste to učinili, upišite devmgmt.msc u traku za pretraživanje i pritisnite enter da otvorite Upravitelj uređaja^{(Device Manager)} . Na kartici Pogledi^(Views) označite opciju Prikaži skrivene uređaje^{(Show Hidden Devices )} i također prikažite Uređaje po vezi^{(Devices By Connection)} .

Pronađite upravljački program za autorizaciju Windows vatrozida^{(Locate Windows Firewall Authorization Driver)} na popisu i dvaput kliknite na njega da biste otvorili njegov okvir Svojstva^(Properties) . Kliknite^(Click) karticu Driver i provjerite je li proces pokrenut, a vrsta pokretanja je Zahtjev^(Demand) . Kliknite OK.

Ponovno pokreni^(Reboot) . Nadamo^(Hopefully) se da bi vaš Windows vatrozid^(Firewall) sada trebao raditi dobro.

5] Pokrenite alat za rezultate grupne politike

Ako ne pomogne, pokrenite alat za rezultate grupnih pravila^{(the Group Policy Result Tool)} da provjerite postoji li pravilo vatrozida koje ga blokira. Otvorite povišeni prozor naredbenog retka, upišite gpresult -z i pritisnite Enter . Provjerite^(Check) pod Rezultantnim skupom^{(Resultant Set)} pravila za^(Policies) računalo ,^(Computer) posebice pod Sigurnosne opcije^{(Security Options)} .

6] Pokrenite alat za rješavanje problema s vatrozidom Windows^{(Run Windows Firewall Troubleshooter)}

Pokrenite Windows Firewall Troubleshooter i provjerite pomaže li vam. Ovaj Microsoftov ^(Microsoft)ATS pomoći će vam da automatski popravite i popravite probleme s vatrozidom za Windows . ^{(Windows Firewall)}Provjerite je li dostupan za vaš Windows ili je ugrađen.

7] Poništite postavke Windows vatrozida

Vratite postavke Windows vatrozida na zadane vrijednosti^{(Reset Windows Firewall settings to defaults)} i pogledajte hoće li to pomoći.

Inače, malo se udaljivši od glavne teme, ako trebate jednostavno pristupiti sljedećim pločama, možete upisati sljedeće naredbe Run i pritisnuti Enter

• Postavke vatrozida: Postavke vatrozida^{(FirewallSettings)}
• Upravljačka ploča vatrozida: FirewallControlPanel
• Windows vatrozid^(Firewall) s naprednom sigurnošću^{(Advanced Security)} : wf.msc

Možda biste željeli vidjeti ovaj post ako vaš Windows ne može pokrenuti Windows vatrozid na lokalnom računalu.  Pogledajte ovaj post ako primite Windows vatrozid je blokirao neke značajke ove poruke aplikacije.

SAVJET^(TIP) : Kako konfigurirati Windows vatrozid^{(Configure the Windows Firewall)} također bi vas moglo zanimati.

Windows Firewall service does not start in Windows 11/10

Windows Firewall acts as the first layer of defense against malware, so it is always advisable to keep it turned ‘ON’ – unless you are using third-party firewall software. If for some unknown reason if you find your Windows Firewall does not start automatically at startup, then here are a few troubleshooting steps you may want to try out.

Windows Firewall service does not start

The error messages you could receive are:

• Windows Firewall is not the default firewall
• Windows Firewall does not start
• Windows could not start the Windows Firewall

If Windows Firewall fails to start, the other errors you could see on your Windows system are:

1. The Windows Firewall service terminated with service-specific error 87 (0x57)
2. Error 0x80004015: The class is configured to run as a security id different from the caller.
3. The Windows Firewall service terminated with service-specific error 6801 (0x1A91).
4. Event ID: 7024 – The Windows Firewall service terminated with service-specific error 5 (0x5)
5. Windows could not start the Base Filtering Engine service on Local Computer. Error 5: Access is denied.
6. Windows could not start the IPsec Policy Agent service on Local Computer. Error 1068: The dependency service or group failed to start.
7. Windows could not start the Network Location Awareness on Local Computer.
8. “net start mpssvc” in cmd.exe returns the system error 1297.

We suggest you try the following troubleshooting:

1. Scan for malware
2. Run SFC and DISM
3. Check Firewall Services status
4. Check Firewall-related Driver status
5. Run Group Policy Result Tool
6. Run Windows Firewall Troubleshooter
7. Reset Windows Firewall settings.

1] Scan for malware

First, scan your machine for malware using good antivirus software. If you have installed a 3rd party firewall or a Security Suite, then that could also be the cause of the problem. Many times, third-party security software can disable the Windows Firewall and even prevent it from starting up.

2] Run SFC and DISM

Run System File Checker or sfc /scannow. You may also want to Run DISM and see if that helps.

3] Check Firewall Services status

Next, type services.msc in Windows Start Search and hit Enter to open up Services. Here ensure that the Windows Firewall Service is started and set on Automatic. You do this by clicking on the Start button. Also, ensure that the Remote Procedure Call Service & the Base Filtering Engine Service is started and set on Automatic.

4] Check Firewall-related Driver status

Now you also have to ensure that the Windows Firewall Authorization Driver (mdsdrv.sys) is running properly.

To do so, type devmgmt.msc in the search bar and hit enter to open Device Manager. In the Views tab, check on Show Hidden Devices and also show Devices By Connection.

Locate Windows Firewall Authorization Driver in the list and double-click on it to open its Properties box. Click on the Driver tab and ensure that the process is started, and the startup type is Demand. Click OK.

Reboot. Hopefully, your Windows Firewall should be working OK now.

5] Run Group Policy Result Tool

If it does not help then run the Group Policy Result Tool to check if there is a Firewall policy blocking it. Open an elevated command prompt window, type gpresult -z and hit Enter. Check under Resultant Set Of Policies For Computer, esp under Security Options.

6] Run Windows Firewall Troubleshooter

Run the Windows Firewall Troubleshooter and see if it helps you. This ATS from Microsoft will help you repair and fix Windows Firewall problems automatically. See if it is available for your Windows or if it is built-in.

7]  Reset Windows Firewall settings

Reset Windows Firewall settings to defaults and see if that helps.

Incidentally, drifting a bit away from the main topic, should you need to access the following panels easily, you can type the following Run commands and hit Enter

• Firewall Settings: FirewallSettings
• Firewall Control Panel: FirewallControlPanel
• Windows Firewall with Advanced Security: wf.msc

You might want to see this post if your Windows could not start the Windows Firewall on Local Computer. See this post if you receive Windows Firewall has blocked some features of this app message.

TIP: How to Configure the Windows Firewall may also interest you.

Related posts

• Kako konfigurirati Windows vatrozid u sustavu Windows 11/10

• Kako dopustiti ili blokirati program u vatrozidu sustava Windows 11/10

• Uvoz, izvoz, popravak, vraćanje zadanih pravila vatrozida u sustavu Windows 11/10

• Uključite ili isključite obavijesti vatrozida za Windows u sustavu Windows 11/10

• Najbolji besplatni softver vatrozida za Windows 11/10 Pregled, preuzimanje

• Ne mogu primati ili upućivati ​​pozive pomoću aplikacije Vaš telefon u sustavu Windows 11/10

• Izbornik Start se ne otvara ili gumb Start ne radi u sustavu Windows 11/10

• Pogreška pri pozivu udaljene procedure tijekom korištenja DISM-a u sustavu Windows 11/10

• Sigurnost sustava Windows kaže da nema pružatelja sigurnosti u sustavu Windows 11/10

• SFC ne radi, neće se pokrenuti ili ne može popraviti oštećenu datoteku u sustavu Windows 11/10

• Izbrisani pisač se stalno pojavljuje i vraća u sustavu Windows 11/10

• Windows vatrozid ne može promijeniti neke od vaših postavki

• Kako riješiti probleme s performansama u sustavu Windows 11/10

• Windows programi za rješavanje problema ne rade u sustavu Windows 11/10

• Opcija Pokreni kao administrator koja se ne prikazuje ili ne radi u sustavu Windows 11/10

• Windows Audio Service ne radi u sustavu Windows 11/10

• Host dobavljača WMI (WmiPrvSE.exe) Visoka upotreba CPU-a u sustavu Windows 11/10

• Windows Update nije se instalirao ili se neće preuzeti u sustavu Windows 11/10

• Nije moguće mapirati mrežni pogon u sustavu Windows 11/10

• Ponovno izgradite datoteku Tokens.dat ili Activation Tokens u sustavu Windows 11/10