Ako koristite Windows 11/10/8/7 i nedavno ste dobili pogrešku prilikom pokretanja Windows Defendera^{(Windows Defender)} – Usluga ovog programa je prestala^{(This program’s service has stopped)} , tada morate riješiti ovaj problem što je prije moguće jer je vaše računalo sada u ranjivom stanju. Ova posebna poruka o pogrešci također se može pojaviti ako Windows Defender prestane raditi glatko. Cijela poruka je-

Windows Defender: This program’s service has stopped. You can start the service manually or restart your computer, which will start the service. (Error Code: 0x800106ba)

Ako koristite stariju verziju sustava Windows , možda ćete vidjeti drugi tekst, ali problem je isti –

This program is turned off. If you are using another program that checks for harmful or unwanted software, use the Action Center to check that program’s status.

Možda vam se ponudi opcija da ga UKLJUČITE. Međutim, u većini slučajeva problem i dalje postoji čak i nakon ručnog uključivanja Windows Defendera ili ponovnog pokretanja računala.^{(Windows Defender)}

Usluga ovog programa je zaustavljena

Možete isprobati ove prijedloge za rješavanje problema i vidjeti hoće li vam neki od njih pomoći u ovoj grešci Microsoft Defendera^{(Microsoft Defender error)} –

1] Onemogućite anti-malware treće strane

Ovaj se problem uglavnom javlja kada instalirate drugi anti-malware softver na svoje računalo. Iako se Windows Defender zaustavlja nakon što dobije signal od drugog anti-malwarea, ponekad se ovaj problem može pojaviti zbog neke interne pogreške. U tom slučaju trebate onemogućiti drugu aplikaciju treće strane i provjeriti postoji li problem ili ne. Ako se problem riješi na taj način, možda ćete morati ponovno instalirati softver treće strane protiv zlonamjernog softvera.

2] Uključite uslugu Windows Defender

Prema poruci o pogrešci, usluga Windows Defender je zaustavljena. Dakle, morate ga uključiti pomoću Windows Services Managera^{(Windows Services Manager)} . Da biste to učinili, upišite "services.msc" u okvir za pretraživanje na traci zadataka i pritisnite ^(Taskbar)Enter da biste ga otvorili.

Sada saznajte status ovih sljedećih usluga-

• Usluga napredne zaštite od prijetnji za^{(Defender Advanced Threat Protection Service)} Windows Defender
• Usluga mrežnog pregleda antivirusnog programa Windows Defender^{(Defender Antivirus Network Inspection Service)}
• Antivirusni servis Windows Defender
• Usluga sigurnosnog centra^{(Defender Security Center Service)} Windows Defendera

Vrsta pokretanja^(Startup) za sve ovo treba biti postavljena Automatski –^{(Automatic –)} i Usluge^(Services) bi trebale biti pokrenute,

Ako je drugačije, morate uključiti tu uslugu^(Service) . Da biste to učinili, dvaput kliknite na odgovarajuću uslugu i odaberite "Automatski" kao vrstu pokretanja^(Startup) . Zatim kliknite na gumb "Start" ispod oznake "Status usluge ". ^(Service)Na kraju kliknite na Primijeni^(Apply) .

3] Ponovno registrirajte Windows Defender DLL datoteke

Ponekad ponovna registracija dotičnih DLL datoteka može pomoći u rješavanju ovog problema. Za početak otvorite naredbeni redak^{(Command Prompt)} s administratorskim ovlastima i pokrenite ove naredbe jednu po jednu:

regsvr32  atl.dll

regsvr32  wuapi.dll

regsvr32  softpub.dll

regsvr32  mssip32.dll

Nakon toga otvorite Windows Defender i provjerite postoji li problem ili ne.

4] Provjerite^{(Verify Group Policy Editor)} postavke uređivača grupnih pravila

Provjerite jeste li greškom isključili Windows Defender pomoću uređivača grupnih pravila^{(Group Policy Editor)} . Neki zlonamjerni softver također može promijeniti ovu sigurnosnu značajku. Da biste to potvrdili, upišite gpedit.msc u Pokreni^(Start) pretraživanje i pritisnite Enter da otvorite uređivač lokalnih grupnih pravila^{(Local Group Policy Editor)} . Zatim^(Next) idite na ovaj put-

Computer Configuration > Administrator Templates > Windows Components > Windows Defender Antivirus

Na desnoj strani trebali biste pronaći opciju pod nazivom Isključi Windows Defender Antivirus^{(Turn off Windows Defender Antivirus)} . Dvaput kliknite na njega i provjerite je li postavljeno na "Nije konfigurirano" ili ne. Ako je ovo postavljeno na " Omogućeno^(Enabled) ", morate ga promijeniti u Nije konfigurirano^{(Not Configured)} .

5] Provjerite postavku uređivača registra

Ako je bilo koji zlonamjerni softver promijenio određeni ključ registra^(Registry) , morate ga promijeniti ili potpuno izbrisati da biste riješili ovaj problem. Otvorite uređivač registra^{(Registry Editor)} i idite na ovo mjesto-

HKey_Local_Machine\Software\Policies\Microsoft\Windows Defender

Na desnoj strani, ako pronađete bilo koji ključ pod nazivom DisableAntiSpyware . Možete ga ili izbrisati ili postaviti njegovu vrijednost na 0 (nula).

Nadam se da će vam nešto ovdje pomoći.^{(Hope something here help you.)}

Pogledajte ovaj post ako je Windows Defender potpuno isključen^{(Windows Defender is turned off completely)} .

This program’s service has stopped, 0x800106ba, in Windows Defender

If you are using Windows 11/10/8/7 and you have recently received an error while ѕtarting Windows Defender – This program’s service has stopped, then you need to solve this problem as soon as possible since your PC is now in vulnerable state. This particular error message can also occur if Windows Defender stops running smoothly. The full message is-

Windows Defender: This program’s service has stopped. You can start the service manually or restart your computer, which will start the service. (Error Code: 0x800106ba)

If you are using an older version of Windows, you may see another wording, but the problem is the same–

This program is turned off. If you are using another program that checks for harmful or unwanted software, use the Action Center to check that program’s status.

You may be offered an option to turn it ON. However, in most cases, the issue persists even after turning on Windows Defender manually or restarting the computer.

This program’s service has stopped

You may try these troubleshooting suggestions and see if any of them help you this Microsoft Defender error–

1] Disable third-party anti-malware

This problem mainly occurs when you install another anti-malware software on your computer. Although Windows Defender stops itself after getting a signal from the other anti-malware, sometimes, this problem can occur due to some internal error. In this case, you should disable the other third-party app and check whether the problem persists or not. If the problem gets solved by doing that, you may need to reinstall the third-party anti-malware software.

2] Turn on Windows Defender service

According to the error message, the Windows Defender service has been stopped. So you need to turn it on using Windows Services Manager. To do so, type “services.msc” in the Taskbar search box and hit Enter to open it.

Now find out the status of these following services-

• Windows Defender Advanced Threat Protection Service
• Windows Defender Antivirus Network Inspection Service
• Windows Defender Antivirus Service
• Windows Defender Security Center Service

The Startup type for all these should be set Automatic – and the Services should be started,

If it is otherwise, you need to turn that Service on. To do that, double-click on the respective service, and select “Automatic” as Startup type. Next click on the “Start” button under “Service status” label. Finally, click on Apply.

3] Re-register Windows Defender DLL files

Sometimes, re-registering the concerned DLL files can help solve this issue. To get started, open Command Prompt with administrator privilege, and run these following commands one by one:.

regsvr32  atl.dll

regsvr32  wuapi.dll

regsvr32  softpub.dll

regsvr32  mssip32.dll

After this, open Windows Defender and check whether the problem still exists or not.

4] Verify Group Policy Editor settings

Check if you have mistakenly turned off Windows Defender using Group Policy Editor. Some malware can change this security feature as well. To verify that, type gpedit.msc in Start search and hit Enter to open the Local Group Policy Editor. Next, navigate to this path-

Computer Configuration > Administrator Templates > Windows Components > Windows Defender Antivirus

On the right-hand side, you should find an option called Turn off Windows Defender Antivirus. Double-click on it and check if it is set to “Not Configured” or not. If this is set to “Enabled,” you need to change it to Not Configured.

5] Verify Registry Editor setting

If any malware has made a change to a particular Registry key, you need to either change or delete it completely to fix this problem. Open Registry Editor and head over to this location-

HKey_Local_Machine\Software\Policies\Microsoft\Windows Defender

On the right-hand side, if you find any key called DisableAntiSpyware. You may either delete it or set its value to 0 (zero).

Hope something here help you.

See this post if Windows Defender is turned off completely.

Related posts

• Omogućite i konfigurirajte zaštitu od Ransomware-a u Windows Defenderu

• Kako isključiti mapu iz skeniranja Windows Defendera u sustavu Windows 11/10

• Kako ručno ažurirati Windows Defender u sustavu Windows 10

• Ne može se uključiti Windows Defender u sustavu Windows 11/10

• Upravljajte stavkama u karanteni, izuzecima u Windows Defenderu

• Konfigurirajte Microsoft Defender za skeniranje .zip .rar .cab datoteka u sustavu Windows 11/10

• Omogućite zaštitu potencijalno neželjenih aplikacija u sustavu Windows 11/10

• Vaš IT administrator je onemogućio Windows sigurnost

• Što je kontrola aplikacija i preglednika u sustavu Windows 10 i kako je sakriti

• Windows Defender se ne ažurira automatski u sustavu Windows 11/10

• Najbolji vatrozid za Windows 10 koji nije Windows Defender

• WinDefThreatsView - Postavite zadane radnje za Windows Defender prijetnje

• Gdje se pohranjuju zapisnici izvanmrežnog skeniranja sustava Windows Defender?

• Omogućite ili onemogućite izolaciju jezgre i integritet memorije u sustavu Windows 11/10

• Što je sigurnost uređaja u sustavu Windows 11/0 i kako sakriti ovo područje?

• Popravak Ne može se uključiti Windows Defender

• Trajno onemogućite Windows Defender u sustavu Windows 10

• Popravite pogrešku Windows Defendera 0x8007139f u sustavu Windows 11/10

• Kako otvoriti Windows sigurnosni centar u sustavu Windows 11/10

• Kako koristiti Windows Defender u sustavima Windows 8 i Windows 8.1