Popravak upravljačkog programa WUDFRd nije uspio učitati:   ^{(Fix Driver WUDFRd failed to load: )}WudfRd upravljački program nije uspio učitati uzrokovan je nekompatibilnim upravljačkim programima što se obično događa kada nadogradite na Windows 10 . To je zato što kada ažurirate na Windows 10 vaše upravljačke programe prepisuju Microsoftovi^(Microsoft) upravljački programi što uzrokuje sukob, a time i pogrešku. Ponekad je ova pogreška uzrokovana i Windows Driver Foundation –^{(Windows Driver Foundation – User-mode Driver Framework)} usluga okvira upravljačkih programa u korisničkom načinu nije pokrenuta i onemogućena je. Čini se da će jednostavno^(Simply) pokretanje usluge i postavljanje njezine vrste pokretanja na Automatski^(Automatic) riješiti problem.

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Event ID: 219
Task Category: (212)
Level: Warning
User: SYSTEM
Description:
The driver \Driver\WudfRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_HUAWEI&PROD_SD_STORAGE&REV_2.31#8&5853DF2&0#.

Ova se pogreška obično odnosi na USB upravljačke programe i općenito imaju ID događaja 219^{(Event ID 219)} . Ovaj se događaj događa kada upravljački program plug and play uređaja (na primjer USB upravljački programi) na vašem sustavu ne radi zbog kvara upravljačkog programa ili uređaja. Postoje različiti popravci vezani uz ovu pogrešku o kojima ćemo danas raspravljati. Dakle, bez gubljenja vremena, pogledajmo kako popraviti upravljački program koji WUDFRd^{(Fix Driver WUDFRd)} nije uspio učitati poruku o pogrešci s dolje navedenim koracima za rješavanje problema.

Učitavanje upravljačkog programa WUDFRd za popravak nije uspjelo

Obavezno  stvorite točku vraćanja^{(create a restore point)} u slučaju da nešto krene po zlu.

Metoda 1: Provjerite je li Windows ažuriran^{(Method 1: Make sure Windows is up to date)}

1. Pritisnite Windows Key + I, a zatim odaberite  Ažuriranje i sigurnost.^{(Update & Security.)}

2.Sljedeće kliknite  Provjeri ažuriranja^{(Check for updates)}  i provjerite jeste li instalirali sva ažuriranja na čekanju.

3. Nakon što su ažuriranja instalirana, ponovno pokrenite računalo kako biste popravili pogrešku učitavanja upravljačkog programa WUDFRd. ^{(Fix Driver WUDFRd failed to load error. )}

Metoda 2: Pokrenite Windows Driver Foundation – uslugu okvira upravljačkih programa u korisničkom načinu^{(Method 2: Start Windows Driver Foundation – User-mode Driver Framework Service)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Pronađite Windows Driver Foundation –^{(Windows Driver Foundation – User-mode Driver Framework)} uslugu okvira upravljačkih programa u korisničkom načinu, zatim kliknite desnom tipkom miša na nju i odaberite  Svojstva.^{(Properties.)}

3. Postavite tip pokretanja na Automatski^{( Automatic)} i provjerite je li usluga pokrenuta, ako ne, kliknite na Start.^{(click on Start.)}

4. Kliknite na Primijeni, a zatim na OK.

5. Ponovo pokrenite računalo da biste spremili promjene.

Ovo bi vam trebalo pomoći da popravite pogrešku  Driver WUDFRd ^(F)nije uspio učitati, ^{(ix Driver WUDFRd failed to load error )} ali ako nije, nastavite na sljedeću metodu.

Metoda 3: Onemogućavanje hibernacije tvrdog diska^{(Method 3: Disabling Hard Disk Hibernation)}

1. Desnom tipkom miša kliknite ikonu napajanja^{(Power icon)} na traci sustava i odaberite Mogućnosti napajanja.^{(Power Options.)}

2. Kliknite Promijeni postavke plana^{(Change plan settings)} pored odabranog plana napajanja.

3. Sada kliknite Promjena naprednih postavki napajanja.^{(Change advanced power settings.)}

4.Proširite Tvrdi disk pa proširite Isključite tvrdi disk nakon.^{( Turn off hard disk after.)}

5. Sada uredite postavku za Na bateriju i priključeno.

6. Upišite Never^{(Type Never)} i pritisnite Enter za obje gore navedene postavke.

7. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 4: Ponovno instalirajte USB kontrolere^{(Method 4: Reinstall USB Controllers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite USB Controllers zatim desnom tipkom miša kliknite svaki od njih i odaberite Deinstaliraj.^{( Uninstall.)}

3. Ako traži potvrdu, odaberite Da.^(Yes.)

4. Nakon što su svi kontroleri deinstalirani, ponovno pokrenite računalo da biste spremili promjene.

5. Ovo bi automatski instaliralo upravljačke programe i riješilo problem.

Preporučeno za tebe:^{(Recommended for you:)}

• Onemogućite filtar SmartScreen u sustavu Windows 10^{(Disable SmartScreen Filter in Windows 10)}
• Zaslon za popravak prelazi u stanje mirovanja kada se računalo uključi^{(Fix Screen Goes to Sleep when Computer Turned ON)}
• Fix Error 1962 Nije pronađen operativni sustav^{(Fix Error 1962 No Operating System Found)}
• Popravite ikone sustava koje nedostaju na traci zadataka sustava Windows^{(Fix System icons missing from Windows Taskbar)}

To je to što ste uspješno popravili pogrešku Driver WUDFRd nije uspio učitati^{(Fix Driver WUDFRd failed to load error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

Fix Driver WUDFRd failed to load

Fix Driver WUDFRd failed to load: WudfRd driver failed to load is caused because of incompatible drivers which usually occurs when you upgrade to Windows 10. This is because when you update to Windows 10 you drivers are overwritten by Microsoft drivers which cause a conflict and hence the error. Sometimes this error is also caused because of Windows Driver Foundation – User-mode Driver Framework service is not started and is disabled. Simply starting the service and settings its startup type to Automatic seems to fix the problem.

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Event ID: 219
Task Category: (212)
Level: Warning
User: SYSTEM
Description:
The driver \Driver\WudfRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_HUAWEI&PROD_SD_STORAGE&REV_2.31#8&5853DF2&0#.

This error is usually related to USB drivers and generally, have an Event ID 219. This event happens when a plug and play device driver (For example USB drivers) on your system is failing due to a device driver or device malfunction. There are various fix related to this error which we are going to discuss today. So without wasting any time let’s see how to Fix Driver WUDFRd failed to load error message with the below-listed troubleshooting steps.

Fix Driver WUDFRd failed to load

Make sure to create a restore point just in case something goes wrong.

Method 1: Make sure Windows is up to date

1.Press Windows Key + I then select Update & Security.

2.Next, click Check for updates and make sure to install any pending updates.

3.After the updates are installed reboot your PC to Fix Driver WUDFRd failed to load error. 

Method 2: Start Windows Driver Foundation – User-mode Driver Framework Service

1.Press Windows Key + R then type services.msc and hit Enter.

2.Find Windows Driver Foundation – User-mode Driver Framework service then right-click on it and select Properties.

3.Set it’s startup type to Automatic and make sure the service is running, if not then click on Start.

4.Click Apply followed by OK.

5.Reboot your PC to save changes.

This should help you to Fix Driver WUDFRd failed to load error but if not, then continue to the next method.

Method 3: Disabling Hard Disk Hibernation

1.Right-click on Power icon on system tray and select Power Options.

2.Click Change plan settings next to your chosen Power plan.

3.Now click Change advanced power settings.

4.Expand Hard disk then expand Turn off hard disk after.

5.Now edit the setting for On battery and plugged in.

6.Type Never and hit Enter for both of the above settings.

7.Reboot your PC to save changes.

Method 4: Reinstall USB Controllers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand USB Controllers then right-click on each of them and select Uninstall.

3.If asks for confirmation select Yes.

4.After all the controllers are uninstalled reboot your PC to save changes.

5.This would automatically install the drivers and would fix the issue.

Recommended for you:

• Disable SmartScreen Filter in Windows 10
• Fix Screen Goes to Sleep when Computer Turned ON
• Fix Error 1962 No Operating System Found
• Fix System icons missing from Windows Taskbar

That’s it you have successfully Fix Driver WUDFRd failed to load error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravite problem s upravljačkim programom kontrolera univerzalne serijske sabirnice (USB).

• Popravi upravljački program pisača nije dostupan u sustavu Windows 10

• Popravite upravljački program Wacom tableta koji nije pronađen u sustavu Windows 10

• Popravi MTP USB upravljački program za uređaj nije uspio

• Riješite problem s Realtek audio upravljačkim programom visoke razlučivosti

• Popravi Host Proces za Windows usluge je prestao raditi

• Popravak Ne može se uključiti Windows Defender

• 5 načina za rješavanje problema Steam misli da igra radi

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Popravite ponovno pokretanje Windows računala bez upozorenja

• 9 načina da popravite Twitter videozapise koji se ne reproduciraju

• Popravi Windows nije mogao dovršiti formatiranje

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Popravite pogrešku Bluetooth perifernog uređaja Driver Not Found

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• Popravi Ova kopija sustava Windows nije originalna Pogreška