[RJEŠENO] Pogreška probnog tona  ^{([SOLVED] Failed to Play Test Tone Error:  )} nije uspjelo reproducirati : Pogreška testnog^{(Test Tone)} tona nije uspjela reproducirati uzrokovana oštećenim ili zastarjelim upravljačkim programima, nevažećim konfiguracijama zvuka itd. Ova pogreška ukazuje da postoji temeljni problem između vašeg zvučnog hardvera i softvera. Čini se da su se korisnici suočili s ovim problemom u Microsoftovom^(Microsoft) operativnom sustavu, a nedostatak zvuka je veliki problem koji treba odmah riješiti. Dakle, bez gubljenja vremena, pogledajmo kako riješiti ovaj problem.

[RJEŠENO] Reprodukcija testnog tona nije uspjela . Pogreška^{(Test Tone Error)}

Preporuča se stvoriti točku vraćanja u slučaju da nešto pođe po zlu.

Metoda 1: Ponovno pokrenite Windows Audio Service^{(Method 1: Restart Windows Audio Service)}

1. Pritisnite tipku Windows + R zatim upišite “ services.msc ” (bez navodnika) i pritisnite enter.

2. Pronađite ' Windows Audio ', zatim ga kliknite desnom tipkom miša i odaberite Ponovo pokreni.^(Restart.)

3. Zatvorite prozor Usluge^(Services) i ponovno pokrenite računalo da biste spremili promjene.

Metoda 2: Pokrenite provjeru sistemskih datoteka (SFC) i provjerite disk (CHKDSK)^{(Method 2: Run System File Checker (SFC) and Check Disk (CHKDSK))}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

4.Sljedeće, ovdje pokrenite CHKDSK  Kako popraviti pogreške datotečnog sustava pomoću uslužnog programa za provjeru diska (CHKDSK) .^{(How To Fix File System Errors with Check Disk Utility(CHKDSK).)}

5. Pustite da se gornji proces dovrši i ponovno pokrenite računalo da biste spremili promjene.

Provjerite jeste li u mogućnosti  ispraviti pogrešku testnog tona neuspjelog reproduciranja,^{(Fix Failed to Play Test Tone Error,)} ako ne, nastavite sa sljedećom metodom.

Metoda 3: Onemogućite sva poboljšanja^{(Method 3: Disable all enhancements)}

1. Desnom tipkom miša kliknite ikonu zvučnika^(Speaker) na traci zadataka^(Taskbar) i odaberite Zvuk.^(Sound.)

2. Dalje, na kartici Reprodukcija desnom tipkom miša kliknite Zvučnici^{( right-click on Speakers)} i odaberite Svojstva.^{(select Properties.)}

3. Prijeđite na karticu Poboljšanja^{(Enhancements tab)} i označite opciju 'Onemogući sva poboljšanja'.^{(‘Disable all enhancements.’)}

4. Kliknite Primijeni^(Apply) , a zatim OK, a zatim ponovno pokrenite računalo da biste spremili promjene.

Metoda 4: Instalirajte upravljački program High Definition Audio Device^{(Method 4: Install the High Definition Audio Device driver)}

1. Pritisnite tipku Windows + R zatim upišite ' Devmgmt.msc' i pritisnite enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite Kontroleri zvuka^(Sound) , videa i igara i desnom tipkom miša kliknite svoj audio upravljački program^{(Audio Driver)} , a zatim odaberite Ažuriraj softver upravljačkog programa.^{(Update Driver Software.)}

3. Sada odaberite “ Automatsko traženje ažuriranog softvera upravljačkog programa^{(Search automatically for updated driver software)} ” i pustite da se proces završi.

4. Ako nije bilo moguće ažurirati vašu grafičku karticu, ponovno odaberite Ažuriraj softver upravljačkog programa^{(Update Driver Software)} .

5. Ovaj put odaberite " Pregledaj moje računalo za softver upravljačkog programa. ^{(Browse my computer for driver software.)}“

6. Sljedeće odaberite " Pusti me da odaberem s popisa upravljačkih programa uređaja na mom računalu. ^{(Let me pick from a list of device drivers on my computer.)}“

7. Odaberite odgovarajući upravljački program s popisa i kliknite Dalje^(Next) .

8. Pustite da se proces dovrši, a zatim ponovno pokrenite računalo.

9. Alternativno, idite na web-mjesto svog proizvođača i preuzmite najnovije upravljačke programe.

Nakon instaliranja najnovijih upravljačkih programa, provjerite možete li  ispraviti pogrešku testnog tona neuspjelog reproduciranja.^{(Fix Failed to Play Test Tone Error.)}

Metoda 5: Promijenite brzinu uzorkovanja^{(Method 5: Change the Sample Rate)}

1. Desnom tipkom miša kliknite ikonu zvučnika^{(Speaker icon)} na traci zadataka i odaberite Uređaji za reprodukciju.^{( Playback devices.)}

2. Na kartici Reprodukcija^(Playback) odaberite Zvučnici i kliknite Svojstva.^{(click Properties.)}

3. Prijeđite na karticu Napredno^{(Advanced tab)} i promijenite brzinu uzorkovanja na 16 bita, 48000 Hz.^{(16 bit, 48000 Hz.)}

4. Kliknite Primijeni, a zatim OK.

5. Ako brzina uzorkovanja nije postavljena prema zadanim postavkama, kliknite Restore Defaults i testirajte je li se zvuk vratio.

Metoda 6: Vraćanje sustava^{(Method 6: System Restore)}

Kada nijedna od gore navedenih metoda ne uspije u rješavanju pogreške, vraćanje sustava^{(System Restore)} vam definitivno može pomoći u popravljanju ove pogreške. Dakle, bez gubljenja vremena , pokrenite vraćanje sustava^{( run system restore)} kako biste popravili pogrešku testnog tona za neuspjeh reprodukcije.^{( Fix Failed to Play Test Tone Error.)}

Metoda 7: Dodajte lokalnu uslugu u Lokalne korisnike i grupe^{(Method 7: Add the Local Service in the Local Users and Groups)}

How to Backup and Restore the Registry on Windows

1. Pritisnite tipku Windows + R zatim upišite “ commgmt.msc^{(compmgmt.msc)} ” (bez navodnika) i pritisnite enter da otvorite Upravljanje računalom^{(Computer Management)} .

2. Zatim proširite System Tools , a zatim Local Users and Groups i odaberite Grupe.^{(select Groups.)}

3. Desnom tipkom miša kliknite Administratori^{(Right-click Administrators)} na popisu u desnom oknu prozora i odaberite Dodaj u grupu^{(Add to Group)} .

4. Kliknite Dodaj^(Add) , zatim Napredno^(Advanced) , a zatim kliknite Pronađi^(Find) sada. Dvaput^(Double) kliknite Lokalna usluga^{(Local Service)} i kliknite U redu. Na popisu biste trebali vidjeti
NT Authority\Local Service , kliknite U redu.

5. Zatvorite prozor za upravljanje računalom^{(Computer Management)} i ponovno pokrenite uređaj. Vaš problem bi trebao biti riješen.

To je to, uspješno ste popravili pogrešku testnog tona neuspjelog reproduciranja^{(Fix Failed to Play Test Tone Error)} , ali ako još uvijek imate pitanja u vezi s ovim člankom, slobodno ih pitajte u odjeljku za komentare.

[SOLVED] Failed to Play Test Tone Error

[SOLVED] Failed to Play Test Tone Error:  Failed to Play Test Tone error is caused by corrupted or outdated drivers, invalid sound configurations etc. This error indicates that there is an underlying problem between your sound hardware and software. Users have seemed to face this issue in Microsoft operating system and having no sound at all is a major issue which needs to be fixed immediately. So without wasting any time let’s see how to fix this issue.

[SOLVED] Failed to Play Test Tone Error

It’s recommended to create a restore point just in case something goes wrong.

Method 1: Restart Windows Audio Service

1.Press Windows Key + R then type “services.msc” (without quotes) and press enter.

2.Find ‘Windows Audio‘ then right-click on it and select Restart.

3.Close the Services window and restart your PC to save changes.

Method 2: Run System File Checker (SFC) and Check Disk (CHKDSK)

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here How To Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

See if you’re able to Fix Failed to Play Test Tone Error, if not then continue with the next method.

Method 3: Disable all enhancements

1.Right-click on the Speaker icon in Taskbar and select Sound.

2.Next, from the Playback tab right-click on Speakers and select Properties.

3.Switch to Enhancements tab and tick mark the option ‘Disable all enhancements.’

4.Clik Apply followed by OK and then restart your PC to save changes.

Method 4: Install the High Definition Audio Device driver

1.Press Windows Key + R then type ‘Devmgmt.msc’ and hit enter to open Device Manager.

2.Expand Sound, video and game controllers and right-click on your Audio Driver then select Update Driver Software.

3.Now select “Search automatically for updated driver software” and let the process finish.

4.If it wasn’t able to update your graphic card then again select Update Driver Software.

5.This time select “Browse my computer for driver software.“

6.Next, select “Let me pick from a list of device drivers on my computer.“

7.Select the appropriate driver from the list and click Next.

8.Let the process complete and then restart your PC.

9.Alternatively, go to your manufacturer’s website and download the latest drivers.

After installing the latest drivers, check if you’re able to Fix Failed to Play Test Tone Error.

Method 5: Change the Sample Rate

1.Right-click on the Speaker icon in Taskbar and select Playback devices.

2.In Playback tab, select Speakers and click Properties.

3.Switch to the Advanced tab and change the sample rate to 16 bit, 48000 Hz.

4.Click Apply followed by OK.

5.If the sample rate is not set by default, click Restore Defaults and test if the sound’s back.

Method 6: System Restore

When none of the above methods works in resolving the error then System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to Fix Failed to Play Test Tone Error.

Method 7: Add the Local Service in the Local Users and Groups

How to Backup and Restore the Registry on Windows

1.Press Windows Key + R then type “compmgmt.msc” (without quotes) and hit enter to open Computer Management.

2.Next, expand System Tools then Local Users and Groups and select Groups.

3.Right-click Administrators in the list in the right window pane and select Add to Group.

4.Click Add, then Advanced, and then click Find Now. Double click Local Service, and click OK. You should see
NT Authority\Local Service in the list, click OK.

5.Close the Computer Management window and reboot your device. Your problem should be solved.

That’s it you have successfully Fix Failed to Play Test Tone Error but if you still have any queries regarding this article feel free to ask them in the comment’s section.

Related posts

• [RJEŠENO] Pogreška umetnite disk u prijenosni disk

• [RJEŠENO] Nije moguće pokrenuti Pogreška 0xc00000e9

• [RJEŠENO] tipkovnica je prestala raditi na Windows 10

• [RJEŠENO] Pogreška pri pokretanju sustava 0xc0000098 u sustavu Windows 10

• [RJEŠENO] Pogreška operacijskog sustava nije pronađen

• Popravi pogrešku 0x80072efe na Windows 10 Update Assistant

• Popraviti pogrešku Windows Update C8000266?

• Windows Update se ne preuzima niti se instalira, pogreška 0x80070543

• Instalirajte Realtek HD Audio Driver Greška, pogreška OxC0000374 na Windows 10

• Popravite pogrešku nadogradnje sustava Windows 0xC1900101-0x4000D

• Popravak: Windows 10 ažuriranja nisu uspjela. Pogreška 0X80242FFF

• Kako izvesti test kašnjenja miša u sustavu Windows 11/10

• Pogreška oštećenja baze podataka Windows Update [RJEŠENO]

• [RJEŠENO] GWXUX je prestao raditi

• [RJEŠENO] Nije moguće izvršiti datoteke u privremenom direktoriju

• Najbolji softver za testiranje baterije prijenosnog računala i dijagnostički alati za Windows 11/10

• Windows Update nije uspio instalirati s kodom pogreške 0x8024004a

• Popravite pogrešku Windows Update 0x800f0989 u sustavu Windows 11/10

• [RJEŠENO] Windows 10 File Explorer se ruši

• Greška DNS poslužitelja 0x8007232A, Pogreška pri aktivaciji volumena u sustavu Windows