Obično, kada umetnete pogon olovke u računalo, dodjeljuje mu se slovo pogona, a sadržaju olovke može se pristupiti putem Windows File Explorera^{(Windows File Explorer)} . Ponekad pogon olovke ili USB pogon uopće ne radi i suočit ćete se s porukom o pogrešci Insert Disk koja vam onemogućuje pristup sadržaju/podacima unutar pogona.

Vjerojatno ćete se suočiti sa skočnim prozorom koji kaže " Popravi ovaj pogon i pronašli smo pogrešku na ovom pogonu. Kako biste spriječili gubitak podataka, popravite ovaj pogon sada^{(Repair this drive, and We found an error on this drive. To prevent data loss, repair this drive now)} ” putem Windows Error Checking . Korisnici obično zanemaruju ovu pogrešku jer mogu lako pristupiti pogonu olovke bez ikakvih problema. Nakon nekoliko prekida i ponovnog povezivanja, u iskušenju ste da riješite ovu pogrešku i zato pristajete na ovu radnju popravka. Ali popravak ne uspijeva u sredini i od tog trenutka više niste mogli pristupiti sadržaju/podacima USB pogona.

Sada kad god spojite svoj USB pogon, njegov se naziv čak i ne prikazuje, umjesto toga se prikazuje samo Removable Disk i ako pokušate pristupiti USB -u dvostrukim klikom ili istražiti, suočit ćete se sa sljedećom porukom o pogrešci:

Please Insert a Disk into Removable Disk [drive letter]

Ako pokušate otvoriti Svojstva^(Properties) diska , neće biti iskorištenog prostora na disku, niti će ga biti dostupno. Ukratko, vidjet ćete 0 korištenih bajtova i 0 dostupnih bajtova. Ne možete čak ni formatirati svoj USB jer ćete dobiti poruku o pogrešci " Windows nije mogao dovršiti formatiranje". Osim toga, ponekad je slovo pogona rezervirano za Windows , a ako je to slučaj, jednostavno mijenjanje slova pogona će popraviti ovu pogrešku.

U mnogim slučajevima korisnici su se također suočili s gornjim scenarijem kada su prvi put koristili svoj pogon olovke kao USB za podizanje sustava , a nakon što pokušaju spojiti pogon olovke na svoje računalo, suočeni su s gornjom porukom o pogrešci Insert Disc . Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti pogrešku Molimo umetnite ^{(Fix Please Insert)}disk u prijenosni disk USB^{(Disk USB Error)} uz pomoć dolje navedenog vodiča za rješavanje problema.

[RJEŠENO] Pogreška umetnite ^{(Disk Error)}disk u prijenosni disk

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Promijenite slovo pogona USB uređaja^{(Method 1: Change USB device drive letter)}

1. Pritisnite tipku Windows + R zatim upišite diskmgmt.msc i pritisnite Enter da otvorite Upravljanje diskom.^{(Disk Management.)}

2. Desnom tipkom miša kliknite svoj USB pogon^{(USB Drive)} i odaberite Promijeni slovo pogona i putove.^{(Change Drive Letter and Paths.)}

3. Zatim kliknite Promjena i odaberite bilo koje slovo pogona^{(Change and select any drive letter)} (osim trenutnog) s padajućeg izbornika i kliknite U redu.

4. Kliknite Da^(Yes) za zatvaranje upozorenja i nastavak.

5. Zatvorite Disk Management i ponovno pokušajte pristupiti svom USB disku.

Metoda 2: Popravite i vratite sadržaj^{(Method 2: Repair and Recover Content)}

Preuzmite JetFlash Online Recovery^{(Download JetFlash Online Recovery)} i pokrenite .exe datoteku. Odaberite veličinu pogona i kliknite Dalje^(Next) za nastavak. Iako je prvenstveno napravljen za Transcend prijenosne diskove, još uvijek radi sa svim ostalim diskovima, ali nema jamstva pa nastavite na vlastitu odgovornost. Moguće je da drugi proizvođači imaju vlastiti softver, na primjer, ako imate HP USB pogon, onda koristite ovaj softver: HP USB Disk Storage Format Tool.

Metoda 3: Pokrenite alat za rješavanje problema s hardverom i uređajima^{(Method 3: Run Hardware and Devices Troubleshooter)}

1. Pritisnite tipku Windows key + R da biste otvorili dijaloški okvir Pokreni .^(Run)

2. Upišite " control ", a zatim pritisnite Enter.

3. Otvorite upravljačku ploču i potražite Troubleshooting u traci za pretraživanje^{(Search Bar)} u gornjem desnom kutu i kliknite na Troubleshooting .

4. Zatim kliknite na View all u lijevom oknu.

5. Kliknite i pokrenite Alat za rješavanje problema za hardver i uređaj.^{( Troubleshooter for Hardware and Device.)}

6. Gornji alat za rješavanje problema^{(Troubleshooter)} možda će moći popraviti pogrešku umetanja diska u USB izmjenjivi disk.^{(Fix Please Insert a Disk into Removable Disk USB Error.)}

Metoda 4: Formatirajte pogon^{(Method 4: Format the Drive)}

1. Pritisnite tipku Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

Diskpart
List Disk
Select Disk # (Note: Replace # with the number of your USB drive)
Clean
Create Partition Primary
Select Partition 1
Active
Format FS=NTFS
Assign
Exit

3. Sigurno uklonite i ponovno spojite USB pogon i provjerite možete li ispraviti USB Error Molimo umetnite disk u prijenosni disk.^{(Fix Please Insert a Disk into Removable Disk USB Error.)}

Metoda 5: Brisanje volumena^{(Method 5: Delete Volume)}

1. Pritisnite tipku Windows + R zatim upišite diskmgmt.msc i pritisnite Enter.

2. Desnom tipkom miša kliknite svoj USB pogon^{(USB drive)} i odaberite Delete Volume.

3. Kliknite Da^(Yes) za nastavak postupka.

4. Odspojite^(Disconnect) i ponovno spojite USB pogon i provjerite možete li mu pristupiti.

Preporučeno:^{(Recommended:)}

• Popravite unos brojeva na tipkovnici umjesto slova^{(Fix Keyboard Typing Numbers Instead of Letters)}
• Popravak Ne može se pristupiti usluzi Windows Installer^{(Fix The Windows Installer service could not be accessed)}
• Kako popraviti vaše računalo ima problem s memorijom^{(How To Fix Your Computer has a Memory problem)}
• Popravite pogrešku Windows Update 0x80080005^{(Fix Windows Update Error 0x80080005)}

To je to što ste uspješno popravili. Molimo umetnite disk u USB-pogrešku za prijenosni disk^{(Fix Please Insert a Disk into Removable Disk USB Error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

[SOLVED] Please Insert a Disk into Removable Disk Error

Usually, when yoυ insert a pen drive into PC, it іs assigned a drive letter, and the content of the pen drіve can be accessed via Windows File Explorer. Sometimes, the pen drive оr USB drive dоesn’t work at all, аnd you will fаce the Insert Disk error message that prevents you from accessing the content/data inside the drіve.

Chances are you may be facing the pop-up which says “Repair this drive, and We found an error on this drive. To prevent data loss, repair this drive now” via Windows Error Checking. Usually, users ignore this error as they can easily access the pen drive without any issue. After a few disconnects and reconnect, you are tempted to resolve this error, and that’s why you agree to this repair action. But the repair fails in the middle and from that point on, you couldn’t access the content/data of the USB drive.

Now whenever you connect your USB drive its name doesn’t even show up instead only Removable Disk is shown and if you try to access your USB by double-clicking or explore you will face the following error message:

Please Insert a Disk into Removable Disk [drive letter]

If you try to open The disk’s Properties, there will be no disk space used, nor will there be any available. In short, you will see 0 bytes used and 0 bytes available. You can’t even format your USB as you will receive the error message “Windows was unable to complete the format”. Other then this sometimes the drive letter is reserved for Windows and if that is the case, then simply changing the drive letter will fix this error.

In many cases, users also faced the above scenario when they first used their pen drive as a bootable USB, and once they try to connect the pen drive to their PC, they are faced with the above Insert Disc error message. So without wasting any time let’s see how to actually Fix Please Insert a Disk into Removable Disk USB Error with the help of below-listed troubleshooting guide.

[SOLVED] Please Insert a Disk into Removable Disk Error

Make sure to create a restore point just in case something goes wrong.

Method 1: Change USB device drive letter

1. Press Windows Key + R then type diskmgmt.msc and hit Enter to open Disk Management.

2. Right-click on your USB Drive and select Change Drive Letter and Paths.

3. Next, click on Change and select any drive letter (except the current one) from the drop-down and click OK.

4. Click Yes to close the warning and continue.

5. Close Disk Management and again try to access your USB drive.

Method 2: Repair and Recover Content

Download JetFlash Online Recovery and run the .exe file. Choose the drive size and click Next to continue. Although it was primarily made for Transcend removable drives, it still works with all other drives, but there is no guarantee so continue at your own risk. It’s possible that other manufacturer’s have their own software, for example, if you have an HP USB drive then use this software: HP USB Disk Storage Format Tool.

Method 3: Run Hardware and Devices Troubleshooter

1. Press the Windows key + R button to open the Run dialogue box.

2. Type ‘control‘ and then press Enter.

3. Open control panel and search Troubleshooting in the Search Bar on the top right side and click on Troubleshooting.

4. Next, click on View all in the left pane.

5. Click and run the Troubleshooter for Hardware and Device.

6. The above Troubleshooter may be able to Fix Please Insert a Disk into Removable Disk USB Error.

Method 4: Format the Drive

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following command into cmd and hit Enter after each one:

Diskpart
List Disk
Select Disk # (Note: Replace # with the number of your USB drive)
Clean
Create Partition Primary
Select Partition 1
Active
Format FS=NTFS
Assign
Exit

3. Safely remove and reconnect your USB drive and see if you’re able to Fix Please Insert a Disk into Removable Disk USB Error.

Method 5: Delete Volume

1. Press Windows Key + R then type diskmgmt.msc and hit Enter.

2. Right-click on your USB drive and select Delete Volume.

3. Click Yes to continue with the process.

4. Disconnect and again re-connect your USB drive and see if you’re able to access it.

Recommended:

• Fix Keyboard Typing Numbers Instead of Letters
• Fix The Windows Installer service could not be accessed
• How To Fix Your Computer has a Memory problem
• Fix Windows Update Error 0x80080005

That’s it you have successfully Fix Please Insert a Disk into Removable Disk USB Error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• [RJEŠENO] Pogreška operacijskog sustava nije pronađen

• [RJEŠENO] 100% korištenje diska od strane sustava i komprimirane memorije

• [POPRAVLJENO] Pogreška Windows Update 0x80010108

• 4 načina za pokretanje provjere grešaka diska u sustavu Windows 10

• [RJEŠENO] Windows 10 se nasumično zamrzava

• Popravi pogrešku pri prijavi na Nexus Mod Manager [RJEŠENO]

• Popravite pogrešku Steam Corrupt Disk u sustavu Windows 10

• Vaš račun je onemogućen. Molimo pogledajte svog administratora sustava [RJEŠENO]

• [ISPRAVLJENO] ERR_QUIC_PROTOCOL_ERROR u Chromeu

• Pogreška neispravne funkcije MS-DOS u sustavu Windows 10 [RIJEŠENO]

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• 17 načina da popravite grešku pisanja na Dota 2 disk

• Popravak: 'Pogreška audiorenderera: ponovno pokrenite računalo'

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• [RJEŠENO] Windows je otkrio problem s tvrdim diskom

• [RJEŠENO] WiFi povezan, ali nema interneta u sustavu Windows 10

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• [RJEŠENO] Aplikacija se ne može otvoriti pomoću ugrađenog administratorskog računa

• [POPRAVLJENO] USB pogon ne prikazuje datoteke i mape

• [RJEŠENO] Microsoft Print to PDF ne radi