Korisnici su prijavili da su naišli na ovu pogrešku prilikom pokušaja pokretanja datoteke za postavljanje, što znači da je glavni uzrok ovog problema dopuštenje korisnika. Ono što želim reći je da se u nekom trenutku vaš sustav možda oštetio i zbog čega vaš korisnik ne dobiva dopuštenje za pokretanje instalacijske datoteke.

 Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied

Iako uzroci ove pogreške nisu ograničeni na dopuštenje korisnika kao u nekim slučajevima, glavni problem je bio s Temp mapom sustava Windows , za koju je utvrđeno da je oštećena. Pogreška "Nije moguće izvršiti datoteke^(Files) u privremenom^(Temp) direktoriju" neće vam dopustiti da instalirate izvršnu datoteku čak i ako zatvorite skočni^(Pop-up) okvir, što znači ozbiljan problem za korisnika. Sada postoji nekoliko rješenja koja pomažu ispraviti ovu pogrešku, pa bez gubljenja vremena pogledajmo ih.

Napomena: Obavezno stvorite točku vraćanja sustava u slučaju da slučajno nešto zabrljate u sustavu Windows^(Windows) .

[RJEŠENO] Nije moguće izvršiti datoteke^(Files) u privremenom^(Temporary) direktoriju

Prije nego isprobate dolje navedene metode, provjerite jeste li prvo pokušali pokrenuti Program ( koji^(Which) pokušavate instalirati) kao administrator i ako i dalje vidite ovu pogrešku, nastavite. Dakle, bez gubljenja vremena, pogledajmo kako popraviti pogrešku nemogućnosti izvršavanja datoteka u privremenom direktoriju^{(Fix Unable To Execute Files In The Temporary Directory error)} uz pomoć dolje navedenog vodiča.

1. način: popravite^(Fix) sigurnosne dozvole u mapi Temp

1. Pritisnite tipku Windows + R zatim upišite %localappdata%  i pritisnite enter.

2. Ako ne možete doći do gornje mape, idite do sljedeće mape:

C:\Users\[Username]\AppData\Local

3. Desnom tipkom miša kliknite mapu Temp^{(Temp folder)} i odaberite Svojstva.^{(Properties.)}

4. Zatim prijeđite na karticu Sigurnost^{(Security tab)} i kliknite Napredno^(advanced) .

5. U prozoru s dozvolama vidjet ćete ova tri unosa dopuštenja:

SYSTEM with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'
Administrators with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'
Your Username with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'

6. Zatim svakako označite opciju 'Zamijeni sve unose dopuštenja podređenog objekta s nasljednim unosima dopuštenja iz ovog objekta'^{(‘Replace all child object permission entries with inheritable permission entries from this object‘)} i Nasljeđivanje je omogućeno,^{(Inheritance is Enabled)} a zatim kliknite Primijeni, a zatim U redu.

7. Sada biste trebali imati dopuštenja za pisanje u Temp direktorij, a datoteka za postavljanje nastavit će se bez greške.

Ova metoda je općenito za većinu korisnika Ispravi pogrešku Nemogućnost izvršavanja datoteka u privremenom direktoriju ^{(Fix Unable To Execute Files In The Temporary Directory error )} , ali ako ste još uvijek zapeli, nastavite.

Metoda 2: Promijenite kontrolu nad mapom Temp

1. Pritisnite tipku Windows Key + R zatim upišite %localappdata% i pritisnite enter.

2. Ako ne možete doći do gornje mape, idite do sljedeće mape:

C:\Users\[Username]\AppData\Local

3. Desnom tipkom miša kliknite mapu Temp i odaberite Svojstva.^(Temp)

4. Zatim prijeđite na karticu Sigurnost^{(Security tab)} i kliknite Uredi.^(Edit.)

5. Kliknite Dodaj i upišite Svi^{(Everyone )} , a zatim kliknite Provjeri imena^{(Check Names)} . Kliknite U redu^(Ok) da zatvorite prozor.

6. Provjerite je li potvrđen okvir Potpuna kontrola, modificiranje i pisanje, a^{(Full Control, Modify and Write box is checked)} zatim kliknite OK za spremanje postavki.

7. Konačno, možete popraviti datoteke^(Files) koje se ne mogu izvršiti u privremenom direktoriju^{(Temporary Directory)} jer gornja metoda daje potpunu kontrolu nad mapom Temp svim korisnicima vašeg sustava.

Metoda 3: Stvaranje nove Temp mape^{(New Temp Folder)}

1. Pritisnite tipku Windows Key + R zatim upišite " C: " (bez navodnika) i pritisnite enter da otvorite pogon C^{(C: drive)} :.

Napomena:^(Note:) Windows mora^(Windows) biti instaliran na C: Drive

2. Ako imate problema s gornjim korakom, jednostavno idite na C: vozite svoje računalo.

3. Zatim desnom tipkom miša kliknite prazan prostor u mapi C: i kliknite New > Folder.

4. Imenujte novu mapu kao Temp i zatvorite prozor.

5. Desnom tipkom miša kliknite Ovo računalo ili Moje računalo^(Computer) i odaberite Svojstva.^{( Properties.)}

6. U lijevom prozoru okna kliknite Napredne postavke sustava.^{(Advanced system settings.)}

7. Prijeđite na karticu Napredno^{(Advanced tab)} , a zatim kliknite Varijable okruženja.^{(Environment Variables.)}

8. U korisničkim^(User) varijablama za vaše korisničko^(User) ime dvaput kliknite TMP varijablu.

 Napomena: ^( Note:) Provjerite^(Make) je li to TMP , a ne varijabla TEMP

9. Zamijenite vrijednost varijable na C:\Temp i kliknite OK za zatvaranje prozora.

10. Ponovno pokušajte instalirati program, koji bi ovaj put radio bez ikakvih problema.

Metoda 4: Razni popravci

1. Pokušajte onemogućiti antivirusni^(Antivirus) i vatrozid^(Firewall) da vidite radi li to ili ne.

2. Onemogućite HIPS (Host-based Intrusion Prevention System HIPS ).

To je to što ste uspješno popravili Nemogućnost izvršavanja datoteka u privremenom direktoriju,^{(Fix Unable To Execute Files In The Temporary Directory,)} ali ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

[SOLVED] Unable To Execute Files In The Temporary Directory

Users hаve reported experiencing this error when trying to run a setup file which mеans the main caυse оf this problem is the user’s permission. What I mean to say is that at some point yoυr system might havе got corrupted and because of which your usеr doesn’t get the permission to run the setup file.

 Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied

While the causes of this error are not limited to user’s permission as in some cases, the main problem was with the Temp folder of Windows, which was found corrupted. The Error “Unable To Execute Files In The Temporary Directory” won’t let you install the executable file even if you close the Pop-up box, which means a serious issue for a user. Now there are few solutions which help fix this error, so without wasting any more time let’s see them.

Note: Make sure to create a system restore point in case you accidentally mess up something in Windows.

[SOLVED] Unable To Execute Files In The Temporary Directory

Before trying the below-listed methods, make sure you first try to run the Program (Which you are trying to install) as Administrator and if you still see this error then continue. So without wasting any time let’s see How to Fix Unable To Execute Files In The Temporary Directory error with the help of the below-listed guide.

Method 1: Fix security permissions on your Temp folder

1. Press Windows Key + R then type %localappdata% and hit enter.

2. If you can’t reach to an above folder, then navigate to the following folder:

C:\Users\[Username]\AppData\Local

3. Right-click on the Temp folder and select Properties.

4. Next, switch to Security tab and click advanced.

5. On the permission window, you will see these three permission entries:

SYSTEM with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'
Administrators with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'
Your Username with Full control inherited from C:\Users\[Username]\ which applies to 'This folder, subfolders, and files.'

6. Next, make sure to tick mark the option ‘Replace all child object permission entries with inheritable permission entries from this object‘ and Inheritance is Enabled then click Apply followed by OK.

7. Now, you should have the permissions to write to the Temp directory, and the setup file will continue without any error.

This method is generally Fix Unable To Execute Files In The Temporary Directory error for most users, but if you’re still stuck, then continue.

Method 2: Change control over the Temp folder

1. Press the Windows Key + R then type %localappdata% and hit enter.

2. If you can’t reach to an above folder, then navigate to the following folder:

C:\Users\[Username]\AppData\Local

3. Right-click on the Temp folder and select Properties.

4. Next, switch to Security tab and click Edit.

5. Click Add and type Everyone then click on Check Names. Click Ok to close the window.

6. Make sure that the Full Control, Modify and Write box is checked then click OK to save the settings.

7. Finally, you may Fix Unable To Execute Files In The Temporary Directory as the above method gives full control over the Temp folder to all the users of your system.

Method 3: Creating a New Temp Folder

1. Press Windows Key + R then type “C:” (without quotes) and hit enter to open C: drive.

Note: The Windows must be installed on C: Drive

2. If you have a problem with the above step, then simply navigate to C: drive your PC.

3. Next, right-click in an empty space in the C: folder and click New > Folder.

4. Name the new folder as Temp and close the window.

5. Right-click This PC or My Computer and select Properties.

6. From the left pane window, click on Advanced system settings.

7. Switch to the Advanced tab and then click Environment Variables.

8. In the User variables for your Username, double-click the TMP variable.

 Note: Make sure it’s TMP, not the TEMP variable

9. Replace the Variable value to C:\Temp and click OK to close the window.

10. Again try to install the program, which would work this time without any problem.

Method 4: Miscellaneous Fixes

1. Try to Disable your Antivirus and Firewall to see if this work or not.

2. Disable HIPS (Host-based Intrusion Prevention System HIPS).

That’s it you have successfully Fix Unable To Execute Files In The Temporary Directory, but if you still have any queries regarding this guide, please feel free to ask them in the comment’s section.

Related posts

• [RJEŠENO] Nije moguće pokrenuti Pogreška 0xc00000e9

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Izbrišite privremene datoteke pomoću alata za čišćenje diska u sustavu Windows 11/10

• Različiti načini brisanja privremenih datoteka u sustavu Windows 11/10

• [RJEŠENO] Windows 10 se nasumično zamrzava

• [RJEŠENO] Windows je otkrio problem s tvrdim diskom

• Što je LRC datoteka? Kako stvoriti LRC datoteku u sustavu Windows 11/10?

• Što je GPX datoteka? Kako otvoriti i pogledati GPX datoteke u sustavu Windows 10?

• [RJEŠENO] Pogreška Driver Corrupted Expool u sustavu Windows 10

• Kako urediti ili dodati metapodatke fotografijama i video datotekama u sustavu Windows 11/10

• TrIDNet: Identificirajte nepoznatu vrstu datoteke bez ekstenzija u sustavu Windows

• [RJEŠENO] Neočekivana iznimka trgovine BSOD u sustavu Windows 10

• Što je datoteka Windows.edb u sustavu Windows 11/10

• Najbolji besplatni softver za univerzalni preglednik datoteka za Windows 11/10

• Kako pretvoriti IMG datoteku u ISO u sustavu Windows 11/10

• Trajno izbrišite datoteke pomoću besplatnog softvera File Shredder za Windows

• Što je PLS datoteka? Kako stvoriti PLS datoteku u sustavu Windows 11/10?

• [RJEŠENO] tipkovnica je prestala raditi na Windows 10

• Kako izbrisati privremene datoteke u sustavu Windows 10

• Kako izbrisati datoteke i mape u sustavu Windows 11/10