Get-Appxpackage je naredba PowerShell koja može prikazati popis paketa aplikacija koji su instalirani u korisničkom profilu. Uključuje sve aplikacije koje su instalirane iz trgovine Microsoft Store^{(Microsoft Store)} ili aplikacija trećih strana. Kada koristite naredbu, ako dobijete pogrešku— Powershell Get-Appxpackage Access Denied, Not Recognized ili Not Working^{(Powershell Get-Appxpackage Access Denied, Not Recognized or Not Working)} , tada će vam ovaj post pomoći da to riješite.

Poruka o pogrešci koju možete vidjeti može se razlikovati, ali obično bi glasila:

Get-AppxPackage : The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

PowerShell Get-Appxpackage Ne radi

To je problem s dopuštenjem koji se može riješiti slijedeći neke provjere.

1. Pokrenite PowerShell^{(Run PowerShell)} s administratorskim dopuštenjem^{(Admin Permission)}
2. Provjerite dopuštenje^{(Check Permission)} s odredišnim imenikom^{(Destination Directory)}
3. Provjerite status usluge AppX Deployment Service^{(Check AppX Deployment Service)} .

Prilikom promjene dopuštenja za mape, pazite da ne uklonite nijedan korisnički račun koji je već dostupan.

1] Pokrenite PowerShell^{(Run PowerShell)} s administratorskim dopuštenjem^{(Admin Permission)}

Budući da se naredba treba instalirati na aplikaciju na razini sustava, važno je da izvršite ili pokrenete naredbu kada se pokrene s dopuštenjem administratora.

• Pritisnite^(Press) gumb Start i upišite PowerShell
• Kada se pojavi na popisu, kliknite desnom tipkom miša i odaberite Pokreni^(Run) kao administrator
• Izvršite naredbu i trebala bi raditi bez greške.

Osim dopuštenja odbijenog, kao pogrešku možete dobiti i Not Recognized ili Not Working . Dok je Not Recognized povezano s dopuštenjem administratora, Ne radi se odnosi na Usluge^(Services) .

Idite na Snap-in usluge^{(Services Snap-in)} i pronađite uslugu licenciranja klijenta^{(Client License Service)} ( ClipSVC ) i uslugu implementacije^{(AppX Deployment Service)} AppX ( AppXSVC ). Provjerite jesu li dostupni i aktivni.

2] Provjerite dopuštenje^{(Check Permission)} s odredišnim imenikom^{(Destination Directory)}

Ako instalirate aplikaciju u određenu mapu, provjerite imate li potpuno dopuštenje za pisanje datoteka u nju.

• Idite na mapu Odredište^{(Destination)} , kliknite desnom tipkom miša i odaberite Svojstva
• Zatim prijeđite na karticu Sigurnost
• Provjerite je li vaš račun dostupan i ima li puno dopuštenje.
• Također morate provjeriti je li korisnički račun sustava^(System) dostupan i ima li potpunu kontrolu
• Ako ne, možete kliknuti na gumb Uredi^(Edit) i dodati ih zajedno s dopuštenjem.

3] Provjerite status usluge AppX Deployment Service^{(Check AppX Deployment Service)}

Na PowerShell konzoli Pokrenite Get-Service "AppXSvc"i pogledajte.

Status usluge postavljanja AppX-a (AppXSVC)^{(AppX Deployment Service (AppXSVC))} trebao bi biti pokrenut.

Ako prikazuje Zaustavljeno^(Stopped) , otvorite naredbeni redak kao administrator i pokrenite:

net start AppXSvc

Alternativno, možete otvoriti Regedit i otići do:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppXSvc

Ovdje postavite vrijednost " Start " na " 3 " i ponovno pokrenite.

Objavite^(Post) ove promjene, možete izvršiti naredbu i pogreška se više ne bi trebala pojaviti.

Pročitajte^(Read) : Kako promijeniti dopuštenja za datoteke i mape u sustavu Windows^{(How to change File and Folder permissions in Windows)} .

Kako mogu omogućiti AppxPackage?

Naredba i povezane datoteke već su dostupne u sustavu Windows^(Windows) i ne morate instalirati ništa posebno. Međutim, provjerite jeste li ga izvršili s dopuštenjem administratora, inače će reći da naredba nije prepoznata.

Kako vratiti ugrađene aplikacije^{(Built-In Apps)} u sustav Windows^(Windows) ?

Otvorite PowerShell^{(Open PowerShell)} s administratorskim pravima i izvršite sljedeću naredbu da biste vratili sve ugrađene aplikacije u sustavu Windows.

Get-AppxPackage -AllUsers | For each app: Add-AppxPackage -DisableDevelopmentMode -Register "$($_InstallLocation)\AppXManifest.xml

Trebat će neko vrijeme da se završi, a sve aplikacije koje su dostupne kada prvi put postavite Windows bit će dostupne.^(Windows)

Nadam se da je post bilo lako pratiti i da jasno razumijete razloge pogreške.

PowerShell Get-Appxpackage Not working or Access Denied

Get-Appxpackage is a PowerShell command that can display a list of the app packages that are installed in a user profile. It includes all the applications that are installed from the Microsoft Store or third-party apps. When using the command, if you receive an error— Powershell Get-Appxpackage Access Denied, Not Recognized or Not Working, then this post will help you resolve this.

The error message you could see may vary but typically, it would read:

Get-AppxPackage : The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

PowerShell Get-Appxpackage Not working

It’s a permission issue that can be resolved by following some checks.

1. Run PowerShell With Admin Permission
2. Check Permission With Destination Directory
3. Check AppX Deployment Service status.

When changing the permission of folders, make sure you do not remove any user account which is already available.

1] Run PowerShell With Admin Permission

Since the command needs to install on the application on a system level, it is important that you execute or run the command when it is launched with admin permission.

• Press the Start button, and type PowerShell
• When it appears on the list, right-click and choose to Run as Administrator
• Execute the command and it should work without error.

Apart from permission denied, you may also receive Not Recognized or Not Working as an error. While Not Recognized is related to admin permission, Not working is related to Services.

Go to Services Snap-in, and locate Client License Service (ClipSVC) and AppX Deployment Service (AppXSVC). Make sure they are available and running.

2] Check Permission With Destination Directory

If you are installing the application in a particular folder, then make sure you have complete permission to write the files inside it.

• Go to the Destination folder, right-click and select Properties
• Then switch to Security tab
• Check if your account is available, and it has full permission.
• You need to also check if the System user account is available and has full control
• If not, you can click on the Edit button, and add them along with the permission.

3] Check AppX Deployment Service status

In the PowerShell console, Run Get-Service "AppXSvc" and see.

The AppX Deployment Service (AppXSVC) Status should be Running.

If it shows Stopped, then open a command prompt as administrator and run:

net start AppXSvc

Alternatively, you could open Regedit and navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppXSvc

Here set the value of “Start” to “3” and reboot.

Post these changes, you can execute the command, and the error should not occur anymore.

Read: How to change File and Folder permissions in Windows.

How Do I Enable AppxPackage?

The command and related files are already available with Windows, and you do not need to install anything special. However, make sure you execute it with admin permission else it will say the command is not recognized.

How to Restore Built-In Apps on Windows?

Open PowerShell with administrator rights, and execute the following command to restore all the Built-in apps in Windows.

Get-AppxPackage -AllUsers | For each app: Add-AppxPackage -DisableDevelopmentMode -Register "$($_InstallLocation)\AppXManifest.xml

It will take some time to finish, and all the apps that are available when you set up Windows for the first time will be available.

I hope the post was easy to follow, and you clearly understand the reasons behind the error.

Related posts

• Konfigurirajte kontrolirani pristup mapama pomoću pravila grupe i PowerShell-a

• 9 načina za otvaranje PowerShell-a u sustavu Windows (uključujući i kao administrator)

• Onemogućite sigurnosna pitanja u sustavu Windows 11/10 pomoću PowerShell skripte

• Provjerite arhitekturu OS Windows 10 pomoću PowerShell-a ili naredbenog retka

• Stvorite točku vraćanja sustava pomoću naredbenog retka ili PowerShell-a

• Kako resetirati aplikacije Microsoft Storea pomoću PowerShell-a u sustavu Windows 10

• Poništite Windows Update Client pomoću PowerShell skripte

• Kako izbrisati ili stvoriti zakazani zadatak pomoću PowerShell-a u sustavu Windows 11

• Kako blokirati IP ili web-mjesto pomoću PowerShell-a u sustavu Windows 10

• Izvoz i sigurnosna kopija upravljačkih programa uređaja pomoću PowerShell-a u sustavu Windows 11/10

• Omogućite udaljenu radnu površinu pomoću naredbenog retka ili PowerShell-a

• Kako provjeriti verziju PowerShell-a u sustavu Windows 11/10

• Kako pretvoriti VHDX datoteku u VHD koristeći PowerShell

• Što je PWSH.EXE? Popis PWSH sintakse koju možete koristiti

• Koristite PowerShell za izmjenu ili promjenu vrijednosti registra

• Razlika između PowerShell i PowerShell Core

• Kako dodati PowerShell u kontekstni izbornik u sustavu Windows 10

• Kako zakazati PowerShell skriptu u Planeru zadataka u sustavu Windows 10

• Popis novih značajki PowerShell 7

• Vratite se Otvorite naredbeni redak ovdje umjesto PowerShell-a u Exploreru