Kad god pokrenete SFC ( System File Checker ), proces se zaustavlja u sredini i daje vam ovu pogrešku " Zaštita resursa sustava Windows^{(Windows Resource Protection)} nije mogla izvršiti traženu operaciju"? Onda ne brinite u ovom vodiču mi ćemo riješiti ovaj problem u kratkom roku, slijedite dolje navedene korake.

Zašto se pogreška  Windows Resource Protection nije mogla izvesti zatraženu operaciju kada se izvodi SFC naredba?

• Datoteke su oštećene, oštećene ili nedostaju
• SFC ne može pristupiti mapi winsxs
• Oštećena particija tvrdog diska
• Oštećene Windows datoteke
• Pogrešna arhitektura sustava

[Popravljeno] Zaštita resursa sustava Windows nije mogla izvesti traženu operaciju

Metoda 1: Pokrenite Windows CHKDSK^{(Method 1: Run Windows CHKDSK)}

1. Pritisnite tipku Windows Key + X i odaberite Naredbeni redak (Administrator).^{(Command Prompt(Admin).)}

2. Upišite sljedeću naredbu u cmd i pritisnite enter:

CHKDSK C: /R

3. Zatim bi se tražilo zakazivanje skeniranja kada se sustav ponovno pokrene, pa upišite Y i pritisnite enter.

4. Ponovno pokrenite svoje računalo i pričekajte da se završi provjera skeniranja diska .^{(Check Disk Scan)}

Napomena:^(Note:) CHKDSK može potrajati neko vrijeme za dovršetak, ovisno o veličini vašeg tvrdog diska.

Metoda 2: Izmjena sigurnosnih deskriptora^{(Method 2: Modify Security Descriptors)}

U većini slučajeva, pogreška se javlja jer SFC ne može pristupiti mapi winsxs, pa morate ručno izmijeniti sigurnosne deskriptore ove mape kako biste popravili Windows Resource Protection^{(Fix Windows Resource Protection)} nije mogao izvesti traženu operacijsku pogrešku.

1. Pritisnite tipku Windows Key + X i odaberite Command Prompt (Admin).

2. Upišite sljedeću naredbu u cmd i pritisnite enter:

ICACLS C:\Windows\winsxs

3. Zatvorite naredbeni redak i ponovno pokrenite računalo.

Metoda 3: Pokrenite DISM naredbe^{(Method 3: Run DISM commands)}

1. Pritisnite tipku Windows Key + X i odaberite Naredbeni redak (Administrator).^{(Command Prompt(Admin).)}

2. Upišite sljedeću naredbu u cmd i pritisnite enter nakon svake:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

3. Pričekajte^(Wait) da se DISM proces završi, a zatim ponovno pokrenite računalo i provjerite možete li popraviti Windows Resource Protection nije mogao izvršiti traženu operacijsku pogrešku.^{(Fix Windows Resource Protection could not perform the requested operation error.)}

Metoda 4: Pokrenite alat za rješavanje problema Windows Update^{(Method 4: Run Windows Update troubleshooter)}

1. Otvorite svoj web preglednik i idite na ovu vezu^(link) .

2. Zatim odaberite svoju verziju sustava Windows^{(version of Windows)} i preuzmite Windows Update Troubleshooter.

3. Dvaput kliknite preuzetu datoteku^{(downloaded file)} za pokretanje.

4. Slijedite upute na zaslonu da biste završili postupak.

5. Ponovno pokrenite računalo.

Method 5: Run Startup/Automatic Repair

1. Umetnite instalacijski DVD za pokretanje sustava Windows 10 i ponovno pokrenite računalo.^{(Insert the Windows 10 bootable installation DVD and restart your PC.)}

2. Kada se od vas zatraži Pritisnite bilo koju tipku ^{(Press any key)} za pokretanje s CD-a ili DVD-a^{(to boot from CD or DVD)} , pritisnite bilo koju tipku za nastavak.

3. Odaberite svoje jezične postavke i kliknite Dalje^(Next) . Kliknite Popravi^{(Click Repair)} svoje računalo u donjem lijevom kutu.

4. Na zaslonu za odabir opcije kliknite Rješavanje problema^{(Troubleshoot)} .

5. Na zaslonu Rješavanje problema^{(Troubleshoot)} kliknite opciju Napredno^{(Advanced option)} .

6. Na zaslonu Napredne^(Advanced) opcije kliknite Automatski popravak ili Popravak pri pokretanju^{(Automatic Repair or Startup Repair)} .

7. Pričekajte da se dovrše Windows Automatic/Startup Repairs

8. Ponovo pokrenite^(Restart) i uspješno ste popravili Popravak Windows Resource Protection nije mogao izvesti traženu operaciju; ako^{( fix Fix Windows Resource Protection could not perform the requested operation; if)}  ne, nastavi.

Također pročitajte: Kako popraviti automatsko popravak nije mogao popraviti vaše računalo .^{(Also Read: How to fix Automatic Repair couldn’t repair your PC.)}

Method 6: Run %processor_architecture%

1. Pritisnite tipku Windows Key + X i odaberite Naredbeni redak (Administrator)^{(Command Prompt(Admin))} .

2. Upišite sljedeću naredbu u cmd i pritisnite enter:

echo %processor_architecture%

Sada znate arhitekturu vašeg računala; ako vrati x86, možete pokušati pokrenuti SFC naredbu na 64-bitnom računalu iz 32-bitnog cmd.exe.

U sustavu Windows^(Windows) postoje dvije različite verzije cmd.exe:

%windir%\SysWow64 (64-bit)
%windir%\system32 (32-bit)

Sigurno mislite da bi ona u SysWow64 bila 64-bitna verzija, ali varate se jer je SysWow64 dio Microsoftove^(Microsoft) prevare. Ovo govorim jer Microsoft to čini kako bi 32-bitna aplikacija radila bez problema na 64-bitnom sustavu Windows^(Windows) . SysWow64 radi sa System32 , gdje možete pronaći 64-bitne verzije.

Stoga sam zaključio da SFC ne može ispravno raditi iz 32-bitnog cmd.exe koji se nalazi u SysWow64 .

Ako je to slučaj, morate ponovno izvršiti čistu instalaciju sustava Windows^{(clean install of Windows)} .

To je to, uspješno ste popravili Windows Resource Protection nije mogao izvršiti traženu operaciju,^{(Fix Windows Resource Protection could not perform the requested operation, )} ali ako i dalje imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

[FIXED] Windows Resource Protection could not perform the requested operation

Whenever you run SFC (System File Checker), the process ѕtopѕ in the middle and gives you this error” Windows Resoυrce Protection could not pеrform the requested operation”? Then don’t worry in this guide we are going to fix this iѕsue in no time, follow the below-listed stеps.

Why the error Windows Resource Protection could not perform the requested operation occurs when running SFC command?

• Damaged, corrupt, or missing files
• SFC cannot access the winsxs folder
• Damaged Hard disk partition
• Corrupted Windows files
• Wrong System Architecture

[Fixed] Windows Resource Protection could not perform the requested operation

Method 1: Run Windows CHKDSK

1. Press Windows Key + X and select Command Prompt(Admin).

2. Type the following command in cmd and hit enter:

CHKDSK C: /R

3. Next, it would ask to schedule the scan when the system restarts, so type Y and hit enter.

4. Restart your PC and wait for the Check Disk Scan to finish.

Note: CHKDSK may take some time to complete depending upon the size of your hard disk.

Method 2: Modify Security Descriptors

In most cases, the error occurs because the SFC cannot access the winsxs folder, so you have to manually modify the security descriptors of this folder to Fix Windows Resource Protection could not perform the requested operation error.

1. Press Windows Key + X and select Command Prompt (Admin).

2. Type the following command in cmd and hit enter:

ICACLS C:\Windows\winsxs

3. Close the command prompt and restart your PC.

Method 3: Run DISM commands

1. Press Windows Key + X and select Command Prompt(Admin).

2. Type the following command in cmd and hit enter after each one:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

3. Wait till the DISM process finishes, then reboot your PC and see if you’re able to Fix Windows Resource Protection could not perform the requested operation error.

Method 4: Run Windows Update troubleshooter

1. Open your web browser and go to this link.

2. Next, select your version of Windows and download the Windows Update Troubleshooter.

3. Double-click the downloaded file to run.

4. Follow the onscreen instruction to finish the process.

5. Restart your PC.

Method 5: Run Startup/Automatic Repair

1. Insert the Windows 10 bootable installation DVD and restart your PC.

2. When prompted to Press any key to boot from CD or DVD, press any key to continue.

3. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

4. On choose an option screen, click Troubleshoot.

5. On the Troubleshoot screen, click the Advanced option.

6. On the Advanced options screen, click Automatic Repair or Startup Repair.

7. Wait till the Windows Automatic/Startup Repairs complete.

8. Restart and you have successfully fix Fix Windows Resource Protection could not perform the requested operation; if not, continue.

Also Read: How to fix Automatic Repair couldn’t repair your PC.

Method 6: Run %processor_architecture%

1. Press Windows Key + X and select Command Prompt(Admin).

2. Type the following command in cmd and hit enter:

echo %processor_architecture%

Now you know your computer architecture; if it returns x86, you may try to run the SFC command on a 64-bit machine from the 32-bit cmd.exe.

In Windows, there are two different versions of cmd.exe:

%windir%\SysWow64 (64-bit)
%windir%\system32 (32-bit)

You must be thinking that the one in SysWow64 would be the 64-bit version, but you are wrong as SysWow64 is a part of Microsoft’s deception. I am saying this because Microsoft does this to make the 32-bit application run seamlessly on a 64-bit Windows. SysWow64 works with System32, where you can find the 64-bit versions.

Hence, what I have concluded is that SFC can’t run properly from a 32-bit cmd.exe found in SysWow64.

If this is the case, then you need to do a clean install of Windows again.

That’s it, you have successfully Fix Windows Resource Protection could not perform the requested operation, but if you still have any questions regarding this post, feel to ask them in the comments section.

Related posts

• Zaštita resursa sustava Windows pronašla je oštećene datoteke, ali neke od njih nije uspjela popraviti

• Zaštita resursa sustava Windows nije mogla pokrenuti uslugu popravka

• [POPRAVLJENO] USB pogon ne prikazuje datoteke i mape

• [ISPRAVLJENO] ERR_QUIC_PROTOCOL_ERROR u Chromeu

• [POPRAVLJENO] Pogreška Windows Update 0x80010108

• [FIXEDE] Pogreška Windows Update 0x80248007

• Omogućite i konfigurirajte zaštitu od Ransomware-a u Windows Defenderu

• Nedostaje registracija usluge ili je oštećena [popravljena]

• Kartica za dijeljenje nedostaje u svojstvima mape [POPRAVLJENO]

• Trebate dopuštenje za izvođenje ove radnje u sustavu Windows 10 [Popravljeno]

• Kako koristiti Monitor resursa u sustavu Windows 10

• [RJEŠENO] Aplikacija se ne može otvoriti pomoću ugrađenog administratorskog računa

• Uklanjanje resursno intenzivnih procesa pomoću Windows upravitelja zadataka (VODIČ)

• Kako ispraviti pogrešku "Zaštita resursa sustava Windows nije mogla izvesti traženu operaciju"

• [RJEŠENO] Pogreška umetnite disk u prijenosni disk

• Pogreške Windows Update 0x800705b4, 0x8024402f ili 0x8024002e [Popravljeno]

• [FIX] Pogreška "Referentni račun je zaključan".

• Kako dodati ili isključiti aplikaciju u zaštiti od eksploatacije sustava Windows 10

• [RJEŠENO] Neočekivana iznimka trgovine BSOD u sustavu Windows 10

• Kako izbrisati povijest zaštite Windows Defendera u sustavu Windows 10