Popravite pozadinsku uslugu inteligentnog prijenosa koja nedostaje uslugama: ^{(Fix Background Intelligent Transfer Service Missing from services: )} ako imate problema s ažuriranjem sustava Windows^{(Windows update)} ili uopće ne možete ažurirati Windows , velika je vjerojatnost da je jedna od povezanih usluga onemogućena ili prestala raditi. Windows ažuriranje^{(Windows update)} ovisi o pozadinskoj inteligentnoj usluzi prijenosa^{(Background Intelligent Transfer Service)} ( BITS ) koja za to djeluje kao upravitelj preuzimanja, ali ako je usluga onemogućena, ažuriranje sustava Windows^{(Windows update)} neće raditi. Sada je najočitija stvar omogućiti BITS iz prozora usluga, ali tu postaje zanimljivo, Pozadinska inteligentna usluga prijenosa^{(Background Intelligent Transfer Service)} ( BITS) se nigdje ne nalazi u prozoru service.msc.

Pa, to su vrlo čudni problemi jer je BITS prema zadanim postavkama prisutan na svakom računalu i nema šanse da bi jednostavno nestao iz Windowsa^(Windows) . To može biti uzrokovano zlonamjernim softverom ili virusnom infekcijom koja je možda u potpunosti izbrisala BITS -ove s vašeg računala i ako pokušate pokrenuti Windows Update , dobit ćete kod pogreške 80246008. U svakom slučaju, bez gubljenja vremena, pogledajmo kako zapravo popraviti pozadinski inteligentni prijenos Usluga^{(Fix Background Intelligent Transfer Service)} Nedostaje u uslugama uz pomoć dolje navedenog vodiča za rješavanje problema.

Popraviti uslugu inteligentnog prijenosa u pozadini koja^{(Fix Background Intelligent Transfer Service)} nedostaje u uslugama

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Ponovno registrirajte BITS-ove^{(Method 1: Re-Register BITS)}

1. Pritisnite tipku Windows + X, a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter :

sc create BITS binpath= “c:\windows\system32\svchost.exe – k netsvcs” start= delayed-auto

3. Izađite iz cmd-a i ponovno pokrenite računalo da biste spremili promjene.

4. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

5. Pronađite BITS i dvaput kliknite na njega, provjerite jeste li postavili tip pokretanja na ^(Startup)Automatski^(Automatic) i kliknite na Start.

6. Kliknite Primijeni, a zatim OK.

7. Ponovno pokrenite svoje računalo da biste spremili promjene i provjerili možete li  popraviti pozadinsku uslugu inteligentnog prijenosa koja nedostaje u prozoru usluga.^{(Fix Background Intelligent Transfer Service Missing from services window.)}

Metoda 2: Ponovno registrirajte DLL datoteke^{(Method 2: Re-Register DLL files)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu jednu po jednu i pritisnite Enter nakon svake:

REGSVR32 QMGR.DLL /s
REGSVR32 QMGRPRXY.DLL /s
REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S

3. Nakon što je naredba ponovno dovršena, pokušajte pokrenuti BITS^{(Start BITS)} usluge.

4. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 3: Pokrenite Microsoft Fixit Tool^{(Method 3: Run Microsoft Fixit Tool)}

Ponekad se mnogo problema može spasiti samo pokretanjem Microsft Fixita^{(Microsft Fixit)} jer može riješiti problem, a zatim ga zapravo popraviti. Ako Fixit ne može riješiti problem s pozadinskim inteligentnim prijenosom koji nedostaje u prozoru usluga^{(Fix Background Intelligent Transfer Service Missing from services window)} , ne brinite, nastavite na sljedeću metodu.

Metoda 4: Pokrenite provjeru sistemskih datoteka^{(Method 4: Run System File Checker)}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

Metoda 5: Pokrenite DISM^{(Method 5: Run DISM)}

1. Pritisnite Windows Key + X i odaberite Naredbeni redak^{(Command Prompt)} ( Admin ).

2.Upišite sljedeću naredbu u cmd i pritisnite enter nakon svake:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

3. Pustite naredbu DISM da se pokrene i pričekajte da završi.

4. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows lokacijom vašeg izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

5. Ponovo pokrenite računalo da biste spremili promjene i provjerite možete li  popraviti pozadinsku inteligentnu uslugu prijenosa koja nedostaje u prozoru usluga,^{(Fix Background Intelligent Transfer Service Missing from services window,)} ako ne, nastavite na sljedeću metodu.

Metoda 6: popravak registra^{(Method 6: Registry Fix)}

Napomena: Provjerite rezervnu kopiju registra^{(backup registry)} , za slučaj da nešto pođe po zlu.

1. Idite ovdje i preuzmite^{( here and download)} datoteku registra.

2. Desnom tipkom miša kliknite datoteku i odaberite Pokreni kao administrator.^{(Run as Administrator.)}

3. Tražit će dopuštenje za spajanje datoteke, kliknite Da za nastavak.^{(Yes to continue.)}

4. Ponovno pokrenite računalo da biste spremili promjene i ponovno pokrenite BITS iz usluga.^{(Start BITS from services.)}

5. Ako ga još uvijek ne možete pronaći, slijedite metode 1^{(Method 1)} i 2.

6. Ponovno pokrenite računalo.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravak Ne mogu podesiti svjetlinu zaslona u sustavu Windows 10^{(Fix Can’t adjust screen brightness in Windows 10)}
• Kako popraviti pogrešku Windows Update 80246008^{(How To Fix Windows Update Error 80246008)}
• Ispravite Pozadinski inteligentni prijenos usluge se neće pokrenuti^{(Fix Background Intelligent Transfer Service won’t start)}
• Popravi ERR_CONNECTION_ABORTED u Chromeu^{(Fix ERR_CONNECTION_ABORTED in Chrome)}

To je to, uspješno ste popravili uslugu inteligentnog prijenosa u pozadini koja nedostaje u prozoru usluga^{(Fix Background Intelligent Transfer Service Missing from services)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovom objavom, slobodno ih postavite u odjeljku za komentare.

Fix Background Intelligent Transfer Service Missing from services

Fix Background Intelligent Transfer Service Missing from services: If you are facing issues with Windows update or you can’t update Windows at all then chances are one of the related services might have been disabled or stopped working. Windows update depends on Background Intelligent Transfer Service (BITS) which acts as a download manager for it, but if the service is disabled then Windows update won’t work. Now the most obvious thing is to enable BITS from services window, but that’s where it gets interesting, the Background Intelligent Transfer Service (BITS) is nowhere to be found in the service.msc window.

Well, that’s very strange issues as BITS is present in every PC by default and there is no way it could just disappear from Windows. This can be caused because of malware or virus infection which might have deleted BITS from your PC altogether and if you try to run Windows Update you will get an error code 80246008. Anyway, without wasting any time let’s see how to actually Fix Background Intelligent Transfer Service Missing from services with the help of below-listed troubleshooting guide.

Fix Background Intelligent Transfer Service Missing from services

Make sure to create a restore point just in case something goes wrong.

Method 1: Re-Register BITS

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

sc create BITS binpath= “c:\windows\system32\svchost.exe – k netsvcs” start= delayed-auto

3.Exit cmd and reboot your PC to save changes.

4.Press Windows Key + R then type services.msc and hit Enter.

5.Find BITS and double click on it, make sure to set the Startup type to Automatic and click on Start.

6.Click Apply followed by OK.

7.Restart your PC to save changes and see if you’re able to Fix Background Intelligent Transfer Service Missing from services window.

Method 2: Re-Register DLL files

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command one by one and hit Enter after each one:

REGSVR32 QMGR.DLL /s
REGSVR32 QMGRPRXY.DLL /s
REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S

3.Once the command is completed again try to Start BITS services.

4.Reboot your PC to save changes.

Method 3: Run Microsoft Fixit Tool

Sometimes a lot of trouble can be saved by just running Microsft Fixit as it can troubleshoot the issue and then actually fix it. If Fixit is not able to Fix Background Intelligent Transfer Service Missing from services window issue then no worry, continue to the next method.

Method 4: Run System File Checker

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

Method 5: Run DISM

1.Press Windows Key + X and select Command Prompt(Admin).

2.Type the following command in cmd and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

3.Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

5.Reboot your PC to save changes and see if you’re able to Fix Background Intelligent Transfer Service Missing from services window, if not then continue to the next method.

Method 6: Registry Fix

Note: Make sure to the backup registry, just in case something goes wrong.

1.Go here and download the registry file.

2.Right-click on the file and select Run as Administrator.

3.It will ask for permission to merge the file, click Yes to continue.

4.Reboot your PC to save changes and again Start BITS from services.

5.If you still can’t find it then follow Method 1 & 2.

6.Restart your PC.

Recommended for you:

• Fix Can’t adjust screen brightness in Windows 10
• How To Fix Windows Update Error 80246008
• Fix Background Intelligent Transfer Service won’t start
• Fix ERR_CONNECTION_ABORTED in Chrome

That’s it you have successfully Fix Background Intelligent Transfer Service Missing from services window but if you still have any questions regarding this post feel free to ask them in the comment’s section.

Related posts

• Ispravite Pozadinski inteligentni prijenos usluge se neće pokrenuti

• Popravite uslugu inteligentnog prijenosa u pozadini (BITS) koja nedostaje u uslugama

• Usluga inteligentnog prijenosa u pozadini ne radi u sustavu Windows 11/10

• Popravi pozadinska inteligentna usluga prijenosa neće pokrenuti pogrešku

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Fix Service Host: Lokalni sustav (svchost.exe) Visoka upotreba CPU-a i diska

• Popravi pogrešku Malwarebytes Unable to Connect Service

• Popravite veliku upotrebu CPU-a usluge SoftThinks Agent Service u sustavu Windows 10

• Popravi Postoji problem sa sigurnosnim certifikatom ove web stranice

• Kako popraviti Firefox koji ne reproducira videozapise (2022)

• Automatski popravi promjene pozadine radne površine u sustavu Windows 10

• Popravak Nemogućnost otvaranja lokalnog diska (C:)

• Popravi USB se neprestano odvaja i ponovno povezuje

• Popravi Ova kopija sustava Windows nije originalna Pogreška

• Popravak radne površine odnosi se na lokaciju koja nije dostupna

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Popravite traku zadataka Windows 10 koja se ne skriva

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Popravite ponovno pokretanje Windows računala bez upozorenja