Popravite uslugu Windows Time se ne pokreće automatski:  ^{(Fix Windows Time service doesn’t start automatically: )}Windows Time service ( W32Time ) je usluga sinkronizacije sata koju pruža Microsoft za Windows koja automatski sinkronizira točno vrijeme za vaš sustav. Sinkronizacija vremena^(Time) se vrši putem NTP ( Network Time Protocol ) poslužitelja^(Server) kao što je time.windows.com. Svako računalo s uslugom Windows Time koristi uslugu za održavanje točnog vremena u svom sustavu.

No ponekad je moguće da se ova Windows vremenska usluga ne pokrene automatski i možete dobiti pogrešku " Windows Time Service nije pokrenut." To znači da se usluga Windows Time nije uspjela pokrenuti i vaš datum^(Date) i vrijeme^(Time) neće biti sinkronizirani. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti Windows Time^{(Fix Windows Time)} servis ne pokreće automatski problem s dolje navedenim koracima za rješavanje problema.

Popravite^{(Fix Windows Time)} uslugu Windows Time se ne pokreće automatski

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Odjavite se, a zatim ponovno Registrirajte uslugu vremena^{(Method 1: Unregister and then again Register Time Service)}

1. Pritisnite Windows Keys + X , a zatim odaberite Naredbeni redak (Administrator).^{(Command Prompt (Admin).)}

2.Upišite sljedeću naredbu jednu po jednu i pritisnite Enter :

pushd %SystemRoot%\system32
.\net stop w32time
.\w32tm /unregister
.\w32tm /register
.\sc config w32time type= own
.\net start w32time
.\w32tm /config /update /manualpeerlist:”0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org”,0x8 /syncfromflags:MANUAL /reliable:yes
.\w32tm /resync
resinc. popd^(popd)

3. Ako gornje naredbe ne rade, pokušajte s ovim:

w32tm /debug /disable
w32tm /unregister
w32tm /register
net start w32time

4.Nakon posljednje naredbe, trebali biste dobiti poruku koja kaže: Pokreće se Windows Time Service. Windows vremenska usluga je uspješno pokrenuta. ^{(The Windows Time Service is starting. The windows time service was started successfully.)}“

5.To znači da vaša sinkronizacija internetskog vremena ponovno radi.^{(Internet Time)}

Metoda 2: Izbrišite događaj okidača koji je registriran kao zadana postavka^{(Method 2: Delete the trigger event that is registered as the default setting)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter :

sc triggerinfo w32time brisanje^{(sc triggerinfo w32time delete)}

3. Sada pokrenite sljedeću naredbu da definirate događaj okidača koji odgovara vašem okruženju:

sc triggerinfo w32time start/networkon stop/networkoff

4. Zatvorite naredbeni redak i ponovno provjerite jeste li u mogućnosti popraviti Windows Time se usluga ne pokreće automatski.

Metoda 3: Omogućite sinkronizaciju vremena u Planeru zadataka^{(Method 3: Enable Time Synchronization in Task Scheduler)}

1. Pritisnite Windows Key + X , a zatim odaberite Upravljačka ploča.^{(Control Panel.)}

2. Kliknite Sustav^(System) i sigurnost^(Security) , a zatim kliknite Administrativni alati.^{(Administrative Tools.)}

3. Dvaput kliknite na Task Scheduler i idite na sljedeći put:

Task Scheduler Library / Microsoft / Windows / Time Synchronization

4. Pod Time Synchronization , desnom tipkom miša kliknite Synchronize Time i odaberite Enable.

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 4: Ručno pokrenite Windows Time Service^{(Method 4: Manually Start the Windows Time Service)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Na popisu pronađite Windows Time Service , a zatim kliknite desnom tipkom miša i odaberite Svojstva.^{(Properties.)}

3. Provjerite je li tip pokretanja^(Startup) postavljen na Automatski (odgođeni početak)^{(Automatic (Delayed Start))} i da je usluga pokrenuta, ako nije, kliknite na  start.

4. Kliknite Primijeni, a zatim OK.

5.Now Time Synchronization u Task Scheduleru^{(Task Scheduler)} može pokrenuti uslugu Windows Time prije Upravitelja kontrole usluga^{(Service Control Manager)} i kako bismo izbjegli ovu situaciju, moramo onemogućiti sinkronizaciju vremena^{(disable Time Synchronization)} u Task Scheduleru.

6.Otvorite Task Scheduler i idite na sljedeći put:

Task Scheduler Library / Microsoft / Windows / Time Synchronization

7. Desni klik na Synchronize Time i odaberite Disable.

8. Ponovo pokrenite računalo da biste spremili promjene.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi pogrešku planera zadataka Jedan ili više navedenih argumenata nisu valjani^{(Fix Task Scheduler Error One or more of the specified arguments are not valid)}
• Kako popraviti zadani pisač koji se stalno mijenja^{(How to Fix Default Printer Keeps Changing Issue)}
• Popravite da web kamera ne radi u sustavu Windows 10^{(Fix Webcam not working in Windows 10)}
• Popravak Superfetcha je prestao raditi^{(Fix Superfetch has stopped working)}

To je to što ste uspješno popravili Windows Time usluga se ne pokreće automatski^{(Fix Windows Time service doesn’t start automatically)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

Fix Windows Time service doesn't start automatically

Fix Windows Time service doesn’t start automatically: Windows Time service (W32Time) is clock synchronization service provided by Microsoft for Windows which automatically synchronize the correct time for your system. The Time synchronization is done through an NTP (Network Time Protocol) Server such as time.windows.com. Every PC running Windows Time service uses the service to maintain accurate time in their system.

But sometimes it’s possible that this Windows time service doesn’t start automatically and you might get the error “The Windows Time Service is not started.” This means the Windows Time service failed to start and your Date & Time will not be synchronized. So without wasting any time let’s see how to actually Fix Windows Time service doesn’t start automatically issue with the below-listed troubleshooting steps.

Fix Windows Time service doesn’t start automatically

Make sure to create a restore point just in case something goes wrong.

Method 1: Unregister and then again Register Time Service

1.Press Windows Keys + X then select Command Prompt (Admin).

2.Type the following command one by one and hit Enter:

pushd %SystemRoot%\system32
.\net stop w32time
.\w32tm /unregister
.\w32tm /register
.\sc config w32time type= own
.\net start w32time
.\w32tm /config /update /manualpeerlist:”0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org”,0x8 /syncfromflags:MANUAL /reliable:yes
.\w32tm /resync
popd

3.If the above commands don’t work then try these:

w32tm /debug /disable
w32tm /unregister
w32tm /register
net start w32time

4.After the last command, you should get a message saying “The Windows Time Service is starting. The windows time service was started successfully.“

5.This means that your Internet Time synchronization is working again.

Method 2: Delete the trigger event that is registered as the default setting

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command in cmd and hit Enter:

sc triggerinfo w32time delete

3.Now run the following command to define a trigger event that suits your environment:

sc triggerinfo w32time start/networkon stop/networkoff

4.Close command prompt and again check if you’re able to Fix Windows Time service doesn’t start automatically issue.

Method 3: Enable Time Synchronization in Task Scheduler

1.Press Windows Key + X then select Control Panel.

2.Click System and Security and then click Administrative Tools.

3.Double click on Task Scheduler and navigate to the following path:

Task Scheduler Library / Microsoft / Windows / Time Synchronization

4.Under Time Synchronization, right-click on Synchronize Time and select Enable.

5.Reboot your PC to save changes.

Method 4: Manually Start the Windows Time Service

1.Press Windows Key + R then type services.msc and hit Enter.

2.Find Windows Time Service in the list then right-click and select Properties.

3.Make sure the Startup type is set to Automatic (Delayed Start) and the service is running, if not then click on start.

4.Click Apply followed by OK.

5.Now Time Synchronization in Task Scheduler may start Windows Time service before the Service Control Manager and in order to avoid this situation, we need to disable Time Synchronization in Task Scheduler.

6.Open Task Scheduler and navigate to the following path:

Task Scheduler Library / Microsoft / Windows / Time Synchronization

7.Right click on Synchronize Time and select Disable.

8.Reboot your PC to save changes.

Recommended for you:

• Fix Task Scheduler Error One or more of the specified arguments are not valid
• How to Fix Default Printer Keeps Changing Issue
• Fix Webcam not working in Windows 10
• Fix Superfetch has stopped working

That’s it you have successfully Fix Windows Time service doesn’t start automatically but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Kako popraviti kašnjenje miša u sustavu Windows 10 (povećati vrijeme odziva miša)

• Popravite da Windows Time Service ne radi

• Popravite problem s pogrešnim vremenom sata u sustavu Windows 10

• Popravite računalo koje se nije ponovno sinkroniziralo jer nisu bili dostupni podaci o vremenu

• Kako popraviti računalo ne objavljuje

• Popravite kako se upravljačka ploča NVIDIA ne otvara

• Popravite Alt+Tab koji ne radi u sustavu Windows 10

• Popravite problem s upravljačkim programom kontrolera univerzalne serijske sabirnice (USB).

• Kako popraviti Avast koji se ne otvara u sustavu Windows

• Popravite problem s tipkovnicom koja ne tipka u sustavu Windows 10

• Popravite PNP otkrivenu fatalnu pogrešku Windows 10

• Kako popraviti pogrešku Windows Update 80072ee2

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Kako popraviti grešku aplikacije 0xc0000005

• Popravi računalo se ne pokreće sve dok se ne pokrene više puta

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Popravak Ne može se uključiti Windows Defender

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434