Nekada sam napisao članak o tome da se usluga BITS (Background Intelligent Transfer Service) ne^{(BITS (Background Intelligent Transfer Service) service not starting)} pokreće i kako možete riješiti taj problem. Bez ove usluge koja radi u pozadini, ne možete preuzeti ažuriranja sustava Windows . ^(Windows)To također uzrokuje razne druge probleme, ali glavni problem koji pogađa većinu ljudi je kada ne mogu preuzeti ažuriranja.

Uglavnom, moj prethodni članak mi je pomogao dosta puta u posljednjih 5 godina. Samo do prije par dana sam naišao na problem s BITS -om gdje mi članak nije pomogao. U ovom slučaju, jedno od mojih računala je dobilo loš virus i u procesu čišćenja usluga BITS je jednostavno nestala s popisa usluga. Bilo koja naredba koju sam pokušao pokrenuti za ponovno pokretanje usluge ili ponovnu registraciju jednostavno ne bi radila.

Na kraju sam saznao da moram u potpunosti ponovno stvoriti uslugu BITS ! U tom trenutku mogao bih ga ponovno registrirati u sustavu Windows^(Windows) , a zatim otići na Usluge^(Services) i pokrenuti ga od tamo. U ovom članku provest ću vas kroz korake za ručnu izradu usluge BITS , a zatim je registrirati u sustavu Windows^(Windows) .

Stvaranje usluge BITS

Prva stvar koju možete pokušati učiniti je ponovno stvoriti uslugu BITS . To možete učiniti otvaranjem administrativnog naredbenog retka i kopiranjem i lijepljenjem naredbe u nastavku:

sc create BITS type= share start= delayed-auto binPath= "C:\Windows\System32\svchost.exe -k netsvcs" tag= no DisplayName= "Background Intelligent Transfer Service"

Možete otvoriti administrativni naredbeni redak tako da kliknete Start , upišete CMD i zatim desnom tipkom miša kliknete naredbeni redak i odaberete Pokreni kao administrator^{(Run as Administrator)} .

Ako iz nekog razloga ne možete natjerati gornju naredbu da ispravno radi, također možete isprobati naredbu u nastavku, koja je samo njezina skraćena verzija. Ako možete, pokušajte kopirati i zalijepiti jer ćete primijetiti da nakon znaka = na nekoliko mjesta odmah iza njega postoji razmak. To nije slučajno, potreban vam je taj prostor inače naredba neće raditi.

sc create BITS binpath= "c:\windows\system32\svchost.exe -k netsvcs" start= delayed-auto

Nakon što je BITS usluga instalirana, moramo provjeriti je li ispravno registrirana. Ako ne, možete ga pokušati pokrenuti s ploče usluge^(Services) , ali vjerojatno ćete dobiti pogrešku poput:

"Windows could not start the BITS service on the local computer. Error2: The system cannot find the file specified"

Registrirajte uslugu BITS

Da biste registrirali uslugu BITS , morate stvoriti batch datoteku i zatim je pokrenuti. Zvuči zastrašujuće i tehničko, ali prilično je jednostavno. Najprije^(First) otvorite Notepad , a zatim zalijepite sljedeće, ovisno o vašem operativnom sustavu.

Windows 2000, Windows XP , Windows Server 2003

REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 MUCLTUI.DLL /S
REGSVR32 WUCLTUI.DLL /S
REGSVR32 WUWEB.DLL /S
REGSVR32 MUWEB.DLL /S
REGSVR32 QMGR.DLL /S
REGSVR32 QMGRPRXY.DLL /S

Windows Vista , Windows 7 , Windows Server 2008

REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S

Ako imate ovaj BITS problem u sustavu Windows 8^{(Windows 8)} ili Windows 10 , postoji još dosta regsvr32 naredbi koje morate pokrenuti. Pogledajte ovaj Microsoftov članak^{(article from Microsoft)} i slijedite upute.

U bilježnici kliknite Datoteka^(File) , a zatim Spremi kao^{(Save As)} . Datoteci dajte naziv bits.bat , a zatim odaberite Sve datoteke^{(All Files)} u okviru Save as Type i spremite je na radnu površinu.

Sada samo desnom tipkom miša kliknite BAT datoteku na radnoj površini i odaberite Pokreni kao administrator^{( Run as Administrator)} . U ovom trenutku trebali biste ponovno pokrenuti svoje računalo i vidjeti možete li učiniti ono što ste pokušavali učiniti ranije, npr. instalirati ažuriranja itd.

Ako se BITS još uvijek ne prikazuje na popisu Windows usluga^(Services) ili ne možete pokrenuti uslugu BITS , možete pokušati preuzeti ovu datoteku registra i pokrenuti je. U osnovi pokušava ispraviti sve unose u registru koji su povezani s uslugom BITS . Ako ni gornje naredbe nisu uspjele, možete pokušati pokrenuti ovu datoteku registra i zatim ponovno pokušati pokrenuti naredbu. Međutim, prvo biste trebali ponovno pokrenuti računalo nakon pokretanja datoteke registra.

http://download.bleepingcomputer.com/win-services/7/BITS.reg

Imajte na umu da je ovo . REG datoteku koja dodaje ključeve i vrijednosti u vaš registar. Tijekom preuzimanja mogli biste dobiti poruku da bi ova datoteka mogla biti opasna, no nije tako da ne morate brinuti. Ako dobijete bilo kakvu poruku o pogrešci kada pokušavate pokrenuti ovu REG datoteku, također možete ponovno pokrenuti računalo u sigurnom načinu rada^{(Safe Mode)} i zatim ga pokušati pokrenuti. Ponekad će pokrenuti proces spriječiti dodavanje nekih vrijednosti u registar.

Ako i dalje imate problema s uslugom BITS koja se ne prikazuje ispravno, javite nam što ste pokušali i kakva je vaša situacija, a mi ćemo vam pokušati pomoći. Uživati!

Fix Background Intelligent Transfer Service (BITS) Missing from Services

Bаck in the day, I wrote an artіcle аbout the BITS (Background Intelligent Transfer Service) service not starting and how you can go about fixing that problem. Without this service running in the background, you can’t download any Windows updates. It causes all kinds of other issues too, but the main problem that affects most people is when they can’t download updates.

For the most part, my previous article has helped me quite a few times over the last 5 years. Only until a few days ago did I run into a problem with BITS where the article didn’t help. In this case, one of my computers had gotten a bad virus and in the process of cleaning it, the BITS service just disappeared from the list of services. Any command I tried to run to restart the service or re-register it simply wouldn’t work.

Eventually I found out that I had to recreate the BITS service altogether! At that point, I could register it again with Windows and then go to Services and start it up from there. In this article, I’ll walk you through the steps for creating the BITS service manually and then registering it with Windows.

Creating the BITS Service

The first thing you can try to do is recreate the BITS service. You can do this by opening an administrative command prompt and copying and pasting the command below:

sc create BITS type= share start= delayed-auto binPath= "C:\Windows\System32\svchost.exe -k netsvcs" tag= no DisplayName= "Background Intelligent Transfer Service"

You can open an administrative command prompt by clicking on Start, typing in CMD and then right-clicking on command prompt and choosing Run as Administrator.

If, for some reason, you can’t get the above command to work properly, you can also try the command below, which is just a shortened version of it. If you can, try to copy and paste because you’ll notice that after the = sign in several locations, there is a space immediately after. That’s not by accident, you need that space otherwise the command won’t work.

sc create BITS binpath= "c:\windows\system32\svchost.exe -k netsvcs" start= delayed-auto

Once the BITS service is installed, we need to make sure it’s registered properly. If not, you can try to start it from the Services panel, but you’ll probably get an error like:

"Windows could not start the BITS service on the local computer. Error2: The system cannot find the file specified"

Register BITS Service

To register the BITS service, you have to create a batch file and then run it. Sounds scary and technical, but it’s pretty easy. First, open Notepad and then paste in the following depending on your operating system.

Windows 2000, Windows XP, Windows Server 2003

REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 MUCLTUI.DLL /S
REGSVR32 WUCLTUI.DLL /S
REGSVR32 WUWEB.DLL /S
REGSVR32 MUWEB.DLL /S
REGSVR32 QMGR.DLL /S
REGSVR32 QMGRPRXY.DLL /S

Windows Vista, Windows 7, Windows Server 2008

REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S

If you are having this BITS problem in Windows 8 or Windows 10, there are quite a few more regsvr32 commands you have to run. Check out this article from Microsoft and follow the directions.

In notepad, click on File and then Save As. Name your file bits.bat and then choose All Files in the Save as Type box and save it to the desktop.

Now just right-click on the BAT file on your desktop and choose Run as Administrator. At this point, you should then go ahead and restart your computer and see if you can do what you were trying to do earlier, i.e install updates, etc.

If BITS is still not showing up in the list of Windows Services or you can’t start the BITS service, then you can try and download this registry file and running it. It basically tries to correct all the registry entries that are associated with the BITS service. If the above commands did not work either, you can try running this registry file and then try running the command again also. However, you should first restart the PC after running the registry file.

http://download.bleepingcomputer.com/win-services/7/BITS.reg

Note that this is a .REG file, which adds keys and values to your registry. You might get a message while downloading it saying that this file could be dangerous, however, it’s not so you don’t have to worry. If you get any error message when trying to run this REG file, you can also restart your PC in Safe Mode and then try to run it. Sometimes a running process will prevent some of the values from being added to the registry.

If you’re still having issues with the BITS service not showing up properly, let us know what you tried and what your specific situation is and we’ll try to help. Enjoy!

Related posts

• Ispravite Pozadinski inteligentni prijenos usluge se neće pokrenuti

• Popraviti uslugu inteligentnog prijenosa u pozadini koja nedostaje u uslugama

• Kako popraviti pogreške usluge integriteta originalnog softvera Adobe

• Kako popraviti visoku upotrebu diska hosta usluge (SysMain) u sustavu Windows 11/10

• Popravi pozadinska inteligentna usluga prijenosa neće pokrenuti pogrešku

• Popravite "Ne mogu pronaći ovu stavku" prilikom brisanja u sustavu Windows

• Kako ispraviti Discordovu grešku "Nema rute".

• Kako popraviti Amazon Fire Tablet koji se ne puni

• Kako ući u siguran način rada Outlooka za rješavanje problema

• Kako popraviti pogreške koje ne rade Discord TTS

• Kako popraviti pogrešku "Windows nije mogao konfigurirati jednu ili više komponenti sustava".

• Kako riješiti "Postoji problem s vašom licencom za ured"

• Kako popraviti pogreške Status_access_violation u Chromeu ili Edgeu

• Ispravite pogrešku "Windows ne može komunicirati s uređajem ili resursom".

• Kako popraviti pogrešku "Vaše je računalo naišlo na problem i mora se ponovno pokrenuti".

• Kako popraviti zvuk koji ne radi na vašem prijenosnom računalu

• Kako popraviti tipke sa strelicama koje ne rade u Excelu

• Popravak Ne mogu podesiti svjetlinu nakon nadogradnje na Windows 8.1/10

• Kako popraviti "dns_probe_started" u Google Chromeu

• Kako popraviti Hotspot koji ne radi na Androidu