Ako se susrećete s kodom pogreške Windows Update 0x80080005^{(Windows Update Error Code 0x80080005)} , na pravom ste mjestu jer ćemo danas razgovarati o tome kako riješiti problem. Windows ažuriranje je ključno za rad sustava bez ikakvih problema; također nudi najnovija sigurnosna ažuriranja i zakrpe. Ako niste u mogućnosti ažurirati Windows , vaš sustav postaje ranjiv na razne napade. Stoga se preporuča riješiti sve probleme s ažuriranjem sustava Windows^(Windows) što je prije moguće. Nedavni napadi ransomwarea bili su mogući samo zato što korisnici nisu ažurirali svoj sustav na najnovija ažuriranja sustava Windows koja su popravila različite ranjivosti.

Poslužitelj {E60687F7-01A1-40AA-86AC-DB1CBF673334} nije se registrirao na DCOM unutar potrebnog vremenskog ograničenja. ^{(The server {E60687F7-01A1-40AA-86AC-DB1CBF673334} did not register with DCOM within the required timeout.)}
Usluga Windows Update prekinula je sljedeću pogrešku:  ^{(The Windows Update service terminated with the following error:  )}
Sustav ne može pronaći navedenu datoteku.^{(The system cannot find the file specified.)}

Glavni uzrok ove pogreške je sukob između sigurnosnog softvera na vašem računalu i Windows Update , koji blokira uslugu BITS . Stoga sustav ne može pristupiti mapi System Volume Information . Sada sve to dovodi do toga da Windows Update izbaci šifru pogreške 0x80080005, pa bez gubljenja vremena pogledajmo kako zapravo popraviti pogrešku Windows Update 0x80080005^{(Fix Windows Update Error 0x80080005)} i 0x80072ee7 uz pomoć dolje navedenog vodiča za rješavanje problema.

Popravite pogrešku Windows Update 0x80080005

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Privremeno onemogućite antivirusni program i vatrozid^{(Method 1: Temporarily Disable Antivirus program and Firewall)}

Ponekad antivirusni^(Antivirus) program može uzrokovati pogrešku^{(error )} i provjerite da to ovdje nije slučaj; morate onemogućiti antivirusni program na ograničeno vrijeme kako biste provjerili pojavljuje li se pogreška i dalje kada je antivirusni program isključen.

1. Desnom tipkom miša kliknite ikonu  Antivirusni program^{( Antivirus Program icon)}  na traci sustava i odaberite  Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će  Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer, 15 minuta ili 30 minuta.

3. Kada završite, ponovno se pokušajte povezati kako biste otvorili Google Chrome i provjerite je li pogreška riješena ili ne.

4. Potražite upravljačku ploču na traci za pretraživanje izbornika Start^{(Start Menu)} i kliknite na nju da biste otvorili  upravljačku ploču.^{( Control Panel.)}

5. Zatim kliknite na  Sustav i sigurnost^{( System and Security)} ,  a zatim kliknite na  Windows vatrozid.^{(Windows Firewall.)}

6. Sada u lijevom oknu prozora kliknite na  Uključi ili isključi Windows vatrozid.^{( Turn Windows Firewall on or off.)}

7.  Odaberite Isključi Windows vatrozid i ponovno pokrenite računalo.^{(Select Turn off Windows Firewall and restart your PC.)}

Ponovno pokušajte otvoriti Google Chrome i posjetite web-stranicu koja je ranije pokazivala  pogrešku. ^( error. )Ako gornja metoda ne uspije, slijedite iste korake da  ponovno uključite vatrozid.^{( turn on your Firewall again.)}

Metoda 2: Pokrenite SFC i CHKDSK^{(Method 2: Run SFC and CHKDSK)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3. Pričekajte^(Wait) da se gore navedeni proces završi i nakon završetka ponovno pokrenite računalo.

4. Zatim pokrenite  CHKDSK da popravite pogreške datotečnog sustava^{(CHKDSK to Fix File System Errors)} .

5. Pustite da se gornji proces dovrši i ponovno pokrenite računalo da biste spremili promjene.

Metoda 3: Pokrenite DISM^{(Method 3: Run DISM)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Sada upišite sljedeće u cmd i pritisnite enter nakon svakog od njih:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

3. Pustite naredbu DISM da se pokrene i pričekajte da završi.

4. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows svojim izvorom popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

5. Ponovno pokrenite računalo da biste spremili promjene i provjerili možete li popraviti pogrešku Windows Update 0x80080005.^{(Fix Windows Update Error 0x80080005.)}

Metoda 4: Pokrenite alat za rješavanje problema Windows Update^{(Method 4: Run Windows Update Troubleshooter)}

1. Preuzmite alat za rješavanje problema Windows Update^{(Windows Update Troubleshooter)} s Microsoftovog web^{(Microsoft Website)} -mjesta .

2. Dvaput kliknite na preuzetu datoteku da biste pokrenuli Alat za rješavanje problema^{(Troubleshooter)} .

3. Slijedite upute na zaslonu kako biste dovršili postupak rješavanja problema.

4. Ponovno pokrenite računalo da biste spremili promjene i provjerite možete li  popraviti pogrešku Windows Update 0x80080005.^{( Fix Windows Update Error 0x80080005.)}

Metoda 5: Ručno resetirajte komponente Windows Update^{(Method 5: Manually Reset Windows Update components)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

net stop bits
net stop wuauserv
net stop appidsvc
net stop cryptsvc

3. Izbrišite datoteke qmgr*.dat, da biste to učinili ponovo otvorite cmd i upišite:

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat”

4. Upišite sljedeće u cmd i pritisnite Enter :

cd /d %windir%\system32

5. Ponovno registrirajte BITS datoteke i datoteke Windows Update^{(Reregister the BITS files and the Windows Update files)} . Upišite^(Type) svaku od sljedećih naredbi pojedinačno u cmd i pritisnite Enter nakon svake:

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

6. Za resetiranje Winsocka:

netsh winsock reset

7. Vratite uslugu BITS i uslugu Windows Update na zadani sigurnosni deskriptor:

sc.exe sdset bitova D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)^{(sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU))}

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

8. Ponovno^(Again) pokrenite usluge ažuriranja sustava Windows :^(Windows)

net start bits
net start wuauserv
net start appidsvc
net start cryptsvc

9. Instalirajte najnoviji Windows Update Agent.

10. Ponovno pokrenite računalo i provjerite možete li popraviti pogrešku Windows Update 0x80080005.^{(Fix Windows Update Error 0x80080005.)}

Metoda 6: Preimenujte mapu SoftwareDistribution^{(Method 6: Rename SoftwareDistribution Folder)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Sada upišite sljedeće naredbe da zaustavite Windows Update Services , a zatim pritisnite Enter nakon svake:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Zatim upišite sljedeću naredbu da biste preimenovali SoftwareDistribution Folder i zatim pritisnite Enter :

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4. Na kraju upišite sljedeću naredbu za pokretanje Windows Update Services i pritisnite Enter nakon svake:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Ponovno pokrenite računalo da biste spremili promjene i provjerite možete li  popraviti pogrešku Windows Update 0x80080005.^{( Fix Windows Update Error 0x80080005.)}

Metoda 7: Omogućite Određivanje postavki za instalaciju dodatne komponente i popravak komponente^{(Method 7: Enable Specify settings for optional component installation and component repair)}

1. Pritisnite tipku Windows + R zatim upišite gpedit.msc i pritisnite Enter.

2. Idite na sljedeći put:

Computer Configuration > Policies > Administrative Templates: Policy > System

3. Sada svakako odaberite Sustav^(System) , a zatim u desnom oknu prozora pronađite i dvaput kliknite na “ Odredi postavke za opcionalnu instalaciju komponente i popravak komponenti. ^{(Specify settings for optional component installation and component repair.)}”

4. Označite " Omogućeno^(Enabled) ", kliknite potvrdni okvir za " Kontaktirajte Windows Update izravno..^{(Contact Windows Update directly..)} "

5. Kliknite Primijeni, a zatim OK.

Metoda 8: Omogućite potpunu kontrolu nad mapom System Volume Information^{(Method 8: Grant full control of the System Volume Information folder)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter :

cmd.exe /c takeown /f "C:\System Volume Information\*" /R /D Y && icacls "C:\System Volume Information\*" /grant:R SYSTEM:F /T /C /L

3. Pričekajte^(Wait) da se naredba završi, a zatim izađite iz naredbenog retka^{(Command Prompt)} .

4. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Popravite BSOD pogrešku kršenja DPC Watchdog-a
• Fix USB Error Code 52 Windows ne može provjeriti digitalni potpis^{(Fix USB Error Code 52 Windows cannot verify the digital signature)}
• Kako popraviti USB pogon koji ne prikazuje datoteke i mape^{(How To Fix USB Drive not showing files and folders)}
• Popravite Windows ne može se instalirati na disk 0^{(Fix Windows Cannot Be Installed to Drive 0)}

To je to što ste uspješno popravili pogrešku Windows Update 0x80080005^{(Fix Windows Update Error 0x80080005)} , ali ako još uvijek imate bilo kakvo pitanje u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

Fix Windows Update Error 0x80080005

If yoυ’re facing Windows Update Error Code 0x80080005, yoυ are at the right рlace as today we will discuss how to fix the issue. Windows update is crυcial for running the system without any problems; it also provides the lаtest security updates and patchеs. If you’re not able to update Windows, your system becomes vulnerable to various exploits. Therefore it is advised to fix any issue with Windows update as soon as possible. Recent ransomware attacks were only possible beсause users didn’t update their system to lаtest Windows updates which fixеd the various νulnerabilities.

The server {E60687F7-01A1-40AA-86AC-DB1CBF673334} did not register with DCOM within the required timeout.
The Windows Update service terminated with the following error: 
The system cannot find the file specified.

This error’s main cause is a conflict between security software on your PC and Windows Update, blocking BITS service. Thus the system is unable to access the System Volume Information folder. Now all these lead to Windows Update throwing an error code 0x80080005, so without wasting any time let’s see how to actually Fix Windows Update Error 0x80080005 and 0x80072ee7 with the help of below-listed troubleshooting guide.

Fix Windows Update Error 0x80080005

Make sure to create a restore point just in case something goes wrong.

Method 1: Temporarily Disable Antivirus program and Firewall

Sometimes the Antivirus program can cause an error and verify this is not the case here; you need to disable your antivirus for a limited time to check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page, which was earlier showing the error. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.

Method 2: Run SFC and CHKDSK

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3. Wait for the above process to finish and once done, restart your PC.

4. Next, run CHKDSK to Fix File System Errors.

5. Let the above process complete and again reboot your PC to save changes.

Method 3: Run DISM

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter after each one:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

3. Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work, then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

5. Reboot your PC to save changes and see if you’re able to Fix Windows Update Error 0x80080005.

Method 4: Run Windows Update Troubleshooter

1. Download the Windows Update Troubleshooter from Microsoft Website.

2. Double-click on the downloaded file to run the Troubleshooter.

3. Follow the on-screen instruction to finish the troubleshooting process.

4. Reboot your PC to save changes and see if you’re able to Fix Windows Update Error 0x80080005.

Method 5: Manually Reset Windows Update components

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter after each one:

net stop bits
net stop wuauserv
net stop appidsvc
net stop cryptsvc

3. Delete the qmgr*.dat files, to do this again open cmd and type:

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat”

4. Type the following into cmd and hit Enter:

cd /d %windir%\system32

5. Reregister the BITS files and the Windows Update files. Type each of the following commands individually in cmd and hit Enter after each one:

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

6. To reset Winsock:

netsh winsock reset

7. Reset the BITS service and the Windows Update service to the default security descriptor:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

8. Again start the Windows update services:

net start bits
net start wuauserv
net start appidsvc
net start cryptsvc

9. Install the latest Windows Update Agent.

10. Reboot your PC and see if you’re able to Fix Windows Update Error 0x80080005.

Method 6: Rename SoftwareDistribution Folder

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4. Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Reboot your PC to save changes and check if you can Fix Windows Update Error 0x80080005.

Method 7: Enable Specify settings for optional component installation and component repair

1. Press Windows Key + R then type gpedit.msc and hit Enter.

2. Navigate to the following path:

Computer Configuration > Policies > Administrative Templates: Policy > System

3. Now make sure to select System than in the right window pane find and double-click on “Specify settings for optional component installation and component repair.”

4. Checkmark “Enabled“, click the checkbox for “Contact Windows Update directly..”

5. Click Apply, followed by OK.

Method 8: Grant full control of the System Volume Information folder

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

cmd.exe /c takeown /f "C:\System Volume Information\*" /R /D Y && icacls "C:\System Volume Information\*" /grant:R SYSTEM:F /T /C /L

3. Wait for the command to finish, then exit Command Prompt.

4. Reboot your PC to save changes.

Recommended:

• Fix DPC Watchdog Violation BSOD Error
• Fix USB Error Code 52 Windows cannot verify the digital signature
• How To Fix USB Drive not showing files and folders
• Fix Windows Cannot Be Installed to Drive 0

That’s it you have successfully Fix Windows Update Error 0x80080005 but if you still have any question regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti pogrešku Windows Update 80072ee2

• Popravite pogrešku Windows Update 0x80070020

• Popravite pogrešku Windows Update 0x800704c7

• Popravite pogrešku Windows Update 0x80246002

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• Popravite pogrešku ažuriranja sustava Windows 10 0x800705b4

• Popravite pogrešku Windows Update 0x8007007e

• Kako popraviti grešku aplikacije 0xc0000005

• Ispravite pogrešku Windows 10 Ažuriranja neće instalirati

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Popravi pogrešku provjere autentičnosti pristupnika modema U-Verse

• Popravite pogrešku ažuriranja sustava Windows 10 0x80070103

• Popravite pogrešku ažuriranja sustava Windows 10 0x8007042c

• Popravite pogrešku Windows Update 80246008

• Popravite pogrešku Windows Update 0xc8000222

• Kako popraviti grešku aplikacije 0xc000007b

• Popravite pogrešku instalacije Windows Update 0x8007012a

• Popravak Developer Mode paketa nije uspio instalirati Kod pogreške 0x80004005