Popravite neuspjeh pokretanja usluge ovisnosti ili grupe: ^{(Fix The Dependency Service or Group Failed to Start: )} Ako se susrećete s ovom pogreškom "Usluga ovisnosti^{(Dependency Service)} ili grupa^(Group) se nije uspjela pokrenuti" onda je to zato što se Windows usluge^(Services) ne pokreću. Čini se da se datoteke sustava Windows^(Windows) pogrešno smatraju virusom i stoga postaju oštećene, što je zauzvrat u sukobu s uslugom Windows Network Location Awareness . Glavna funkcija ove usluge je prikupljanje i pohranjivanje podataka o mrežnoj^(Network) konfiguraciji i obavještavanje prozora^(Window) kada se te informacije promijene. Dakle, ako je ova usluga oštećena, svi programi ili usluge ovisno o njoj također neće uspjeti. Usluga popisa mreže^{(Network List Service)}neće se pokrenuti jer izričito ovisi o usluzi Network Location Awareness koja je već onemogućena zbog oštećene konfiguracije. Usluga svjesnosti o mrežnoj lokaciji^{(Network Location Awareness)} nalazi se u nlasvc.dll koja se nalazi u direktoriju system32.

Vidjet ćete sljedeću pogrešku kada se pokušate povezati s mrežom:

A red “X” on the network icon in the system tray displaying error message – Connection status: Unknown The dependency service or group failed to start

Glavni problem povezan s ovim problemom je taj što se korisnici ne mogu spojiti na Internet čak i ako se povežu putem Ethernet kabela. Ako pokrenete alat za rješavanje problema s mrežom u sustavu Windows^{(Windows Network)} , on će samo prikazati drugu poruku o pogrešci "Usluga dijagnostičkih pravila^{(Diagnostic Policy Service)} ne radi" i zatvorit će se bez rješavanja problema. To je zato što su usluge potrebne za internetsku vezu, lokalne usluge i mrežne usluge, oštećene ili uklonjene s vašeg računala.

Oba gornja slučaja se prilično lako mogu popraviti, a čini se da korisnici pogođeni ovim problemom vraćaju svoju internetsku^(Internet) vezu čim se pogreška riješi. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti poruku o pogrešci ^(Fix)usluge ovisnosti^{(Dependency Service)} ili Grupa nije uspjela pokrenuti^{(Start Error)} pomoću dolje navedenih vodiča za rješavanje problema .^(Group)

Popravite neuspjeh pokretanja usluge ovisnosti^{(Dependency Service)} ili grupe^(Group)

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Dodajte lokalnu uslugu i mrežnu uslugu u grupu administratora^{(Method 1: Add Localservice and Networkservice to Administrators Group)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

net localgroup administrators localservice /add

net localgroup administrators networkservice /add

3. Izađite iz naredbenog retka i ponovno pokrenite računalo da biste spremili promjene.

Nakon što se vaše računalo ponovno pokrene, morate imati problem s popravkom ^(Fix)usluge ovisnosti^{(Dependency Service)} ili pokretanja ^(Start)grupe koja^(Group) nije uspjela .

Metoda 2: Omogućite pristup računima mreže i lokalnih usluga svim potključevima registra^{(Method 2: Give Network and Local service accounts access to all of the registry subkeys)}

1. Preuzmite SubInACL alat naredbenog retka^{(Download the SubInACL command-line tool)} od Microsofta.

2.Instalirajte ga i zatim pokrenite program.

3.Otvorite datoteku bilježnice i spremite datoteku s imenom permission.bat (Proširenje datoteke je važno) i promijenite tip spremanja kao u "Sve datoteke" u bilježnici.

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\NlaSvc” /grant=”Local Service”

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\NlaSvc” /grant=”Network Service”

4. Ako se suočavate s problemom dopuštenja s DHCP -om , pokrenite sljedeću naredbu:

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\dhcp” /grant=”Local Service”

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\dhcp” /grant=”Network Service”

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 3: Ručno uključite potrebne usluge^{(Method 3: Manually Turn on the required Services)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Provjerite rade li sljedeće usluge i jesu li njihova vrsta pokretanja postavljena na Automatski^(Automatic) :

Aplikacija Layer Gateway Service ^{(Application Layer Gateway Service)}
Mrežne veze ^{(Network Connections)}
Svjesnost o mrežnoj lokaciji (NLA) ^{(Network Location Awareness (NLA))}
Plug and Play
Upravitelj automatskog pristupa Upravitelj veze s ^{(Remote Access Auto Connection Manager)}
daljinskim pristupom Upravitelj ^{(Remote Access Connection Manager)}
daljinskog postupka Poziv (RPC) ^{(Remote Procedure Call (RPC))}
Telefonija^(Telephony)

3. Desnom tipkom miša kliknite i odaberite Svojstva^(Properties) za gore navedene usluge, a zatim kliknite Start^{( click start)} ako usluga već nije pokrenuta i postavite njihovu vrstu pokretanja na Automatski^(Automatic) . Učinite to za sve gore navedene usluge.

4. Ponovno pokrenite računalo da biste spremili promjene i ponovno provjerite je li problem riješen ili ne.

5. Ako se ponovno suočite s problemom, također pokrenite ove usluge i postavite njihovu vrstu pokretanja na Automatski:^(Automatic:)

COM+ Event System
Računalni preglednik ^{(Computer browser)}
DHCP klijent ^{(DHCP Client)}
Mrežna trgovina usluga sučelja ^{(Network Store Interface Service)}
DNS klijent ^{(DNS Client)}
mrežne veze ^{(Network Connections)}
Svjesnost o mrežnoj lokaciji ^{(Network Location Awareness)}
Usluga sučelja mrežne trgovine Poziv na daljinu ^{(Network Store Interface Service)}
Poziv za ^{(Remote Procedure Call)}
udaljenu proceduru (RPC) ^{(Remote Procedure Call (RPC))}Sigurnost ^{(Security Accounts Manager)}
poslužitelja Upravitelj računa ^(Server)TCP/IP Netbios helperWLAN AutoConfig radna stanica^{(Workstation)}

Napomena:^(Note:) Tijekom pokretanja DHCP klijenta možete dobiti pogrešku " Windows nije mogao pokrenuti uslugu DHCP klijenta na lokalnom računalu. Pogreška 1186: Element nije pronađen. ^{(Windows could not start the DHCP Client Service on Local Computer. Error 1186: Element not found.)}” Samo zanemarite ovu poruku o pogrešci.

Slično, možete dobiti poruku o pogrešci " Windows nije mogao pokrenuti uslugu Network Location Awareness na lokalnom računalu^{(Local Computer)} . Pogreška 1068: Usluga ovisnosti ili grupa nije se uspjela pokrenuti” kada se pokreće usluga Network Location Awareness , opet jednostavno zanemarite poruku o pogrešci.

Metoda 4: Resetiranje mrežnog adaptera^{(Method 4: Resetting Network Adapter)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

netsh winsock reset katalog ^{(netsh winsock reset catalog)}
netsh int ip reset reset.log hit

3. Dobit ćete poruku " Uspješno resetirajte Winsock katalog. ^{(Successfully reset the Winsock Catalog.)}”

4. Ponovno pokrenite računalo i to će popraviti pogrešku usluge ovisnosti ili neuspjelog pokretanja grupe.^{(Fix The Dependency Service or Group Failed to Start error.)}

Method 5: Resetting TCP/IP to Default

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

• ipconfig /flushdns
• nbtstat –r
• netsh int ip reset reset c: esetlog.txt
• netsh winsock reset

3. Ponovo pokrenite da biste primijenili promjene. Čini se da ispiranje DNS - a popravlja uslugu ovisnosti ili pokretanje grupe.^{(Fix The Dependency Service or Group Failed to Start.)}

Metoda 6: Zamijenite oštećeni nlasvc.dll^{(Method 6: Replace the corrupted nlasvc.dll)}

1. Provjerite imate li pristup jednom od radnih računala. Zatim idite na sljedeći direktorij u radnom sustavu:

C:\windows\system32\nlasvc.dll

2. Kopirajte nlasvc.dll na USB^{(Copy the nlasvc.dll into USB)} , a zatim umetnite USB u računalo koje ne radi koje prikazuje poruku o pogrešci "Usluga ovisnosti^{(Dependency Service)} ili grupa^(Group) nije uspjela pokrenuti^(Start) ."

3. Zatim pritisnite tipku Windows Key + X , a zatim odaberite naredbeni redak (administrator).^{(Command Prompt (Admin).)}

4.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

takeown /f c:\windows\system32\nlasvc.dll

cacls c:\windows\system32\nlasvc.dll /G your_username:F

Napomena: ^(Note:) Zamijenite^(Replace) your_username korisničkim imenom vašeg računala.

5. Sada idite do sljedećeg direktorija:

C:\windows\system32\nlasvc.dll

6. Preimenujte nlasvc.dll u nlasvc.dll.old^{(nlasvc.dll to nlasvc.dll.old)} i kopirajte nlasvc.dll s USB -a na ovo mjesto.

7. Desnom tipkom miša kliknite datoteku nlasvc.dll i odaberite Svojstva.^{(Properties.)}

8. Zatim prijeđite na karticu Sigurnost^{( Security tab)} i kliknite Napredno.^(Advanced.)

9. Pod Vlasnik kliknite Promijeni^{(click Change)} , a zatim upišite NT SERVICE\TrustedInstaller i kliknite Provjeri imena.

10. Zatim kliknite OK  u dijaloškom okviru. Zatim kliknite Primijeni^(Apply) , a zatim U redu.

11. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 7: Popravak Instalirajte Windows 10^{(Method 7: Repair Install Windows 10)}

Ova metoda je posljednje sredstvo jer ako ništa ne uspije onda će ova metoda sigurno popraviti sve probleme s vašim računalom. Popravak Instalirajte^{(Repair Install)} samo pomoću nadogradnje na mjestu kako biste popravili probleme sa sustavom bez brisanja korisničkih podataka prisutnih u sustavu. Stoga slijedite ovaj članak da biste vidjeli kako jednostavno popraviti instalirati Windows 10.^{(How to Repair Install Windows 10 Easily.)}

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi Ponovo pokrenite računalo da biste instalirali petlju važnih ažuriranja^{(Fix Restart your computer to install important updates loop)}
• Kako popraviti pogreške datotečnog sustava u sustavu Windows 10^{(How To Fix File System Errors on Windows 10)}
• Popravi Windows Update trenutno ne može provjeriti ima li ažuriranja^{(Fix Windows Update cannot currently check for updates)}
• Popravak ne može reproducirati MOV datoteke na Windows Media Playeru^{(Fix cannot play MOV Files on Windows Media Player)}

To je to što ste uspješno popravili Neuspjeh pokretanja usluge ovisnosti ili grupe,^{(Fix The Dependency Service or Group Failed to Start)} ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix The Dependency Service or Group Failed to Start

Fix The Dependency Service or Group Failed to Start: If you are facing this error “The Dependency Service or Group Failed to Start” then it’s because of Windows Services not starting. It seems like a Windows files is being mistaken as a virus and hence it becomes corrupt which in turn conflict with the Windows Network Location Awareness service. The main function of this service is to collect and store Network configuration information and notifies the Window when this information is changed. So if this service is corrupted any programs or services depending upon it will also fail. The Network List Service will not start as it explicitly depends on the Network Location Awareness service which is already disabled due to the corrupt configuration. The Network Location Awareness service is found in nlasvc.dll which is located in the system32 directory.

You will see the following error when trying to connect to a network:

A red “X” on the network icon in the system tray displaying error message – Connection status: Unknown The dependency service or group failed to start

The main problem associated with this problem is that users are unable to connect to the Internet even if they connect via an Ethernet cable. If you run the Windows Network troubleshooter it will just display the another error message “The Diagnostic Policy Service is not running” and will close without fixing the problem. This is because the service required for internet connection which are localservice and networkservice have been corrupted or removed from your PC.

Both of the above cases are fixable pretty easily, and users affected by this problem seems to get back their Internet connectivity as soon as the error is resolved. So without wasting any time let’s see how to actually Fix The Dependency Service or Group Failed to Start Error message with the below-listed troubleshooting guide.

Fix The Dependency Service or Group Failed to Start

Make sure to create a restore point just in case something goes wrong.

Method 1: Add Localservice and Networkservice to Administrators Group

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter after each one:

net localgroup administrators localservice /add

net localgroup administrators networkservice /add

3.Exit the command prompt and reboot your PC to save changes.

Once your computer reboot you must have Fix The Dependency Service or Group Failed to Start issue.

Method 2: Give Network and Local service accounts access to all of the registry subkeys

1.Download the SubInACL command-line tool from Microsoft.

2.Install it and then run the program.

3.Open a notepad file and save the file with the name permission.bat (The file extension is important) and change the save as type to “All files” in notepad.

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\NlaSvc” /grant=”Local Service”

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\NlaSvc” /grant=”Network Service”

4.If you are facing permission issue with DHCP then run the below command:

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\dhcp” /grant=”Local Service”

subinacl.exe /subkeyreg “HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\dhcp” /grant=”Network Service”

5.Reboot your PC to save changes.

Method 3: Manually Turn on the required Services

1.Press Windows Key + R then type services.msc and hit Enter.

2.Make sure the following services are running and their startup type is set to Automatic:

Application Layer Gateway Service
Network Connections
Network Location Awareness (NLA)
Plug and Play
Remote Access Auto Connection Manager
Remote Access Connection Manager
Remote Procedure Call (RPC)
Telephony

3.Right-click and select Properties for the above services then click start if the service is not already running and set their startup type to Automatic. Do this for all the above services.

4.Reboot your PC to save changes and again check if the issue is resolved or not.

5.If you are again facing the issue then also start these services and set their startup type to Automatic:

COM+ Event System
Computer browser
DHCP Client
Network Store Interface Service
DNS Client
Network Connections
Network Location Awareness
Network Store Interface Service
Remote Procedure Call
Remote Procedure Call (RPC)
Server
Security Accounts Manager
TCP/IP Netbios helper
WLAN AutoConfig
Workstation

Note: While running DHCP client you may receive the error “Windows could not start the DHCP Client Service on Local Computer. Error 1186: Element not found.” Just ignore this error message.

Similarly, you can get the error message “Windows could not start the Network Location Awareness service on Local Computer. Error 1068: The dependency service or group failed to start” when running Network Location Awareness service, again just ignore the error message.

Method 4: Resetting Network Adapter

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter after each one:

netsh winsock reset catalog
netsh int ip reset reset.log hit

3.You will get a message “Successfully reset the Winsock Catalog.”

4.Reboot your PC and this will Fix The Dependency Service or Group Failed to Start error.

Method 5: Resetting TCP/IP to Default

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter after each one:

• ipconfig /flushdns
• nbtstat –r
• netsh int ip reset reset c:\resetlog.txt
• netsh winsock reset

3.Reboot to apply changes. Flushing DNS seems to Fix The Dependency Service or Group Failed to Start.

Method 6: Replace the corrupted nlasvc.dll

1.Make sure you have access to one of the working computer. Then navigate to the following directory in the working system:

C:\windows\system32\nlasvc.dll

2.Copy the nlasvc.dll into USB and then insert the USB into the non-working PC which is showing the error message “The Dependency Service or Group Failed to Start.”

3.Next, press Windows Key + X then select Command Prompt (Admin).

4.Type the following command into cmd and hit Enter after each one:

takeown /f c:\windows\system32\nlasvc.dll

cacls c:\windows\system32\nlasvc.dll /G your_username:F

Note: Replace your_username with your PC username.

5.Now navigate to the following directory:

C:\windows\system32\nlasvc.dll

6.Rename the nlasvc.dll to nlasvc.dll.old and copy the nlasvc.dll from the USB to this location.

7.Right-click on the nlasvc.dll file and select Properties.

8.Then switch to Security tab and click Advanced.

9.Under Owner click Change and then type NT SERVICE\TrustedInstaller and click Check Names.

10.Then click OK on the dialog box. Then click Apply followed by OK.

11.Reboot your PC to save changes.

Method 7: Repair Install Windows 10

This method is the last resort because if nothing works out then this method will surely repair all problems with your PC. Repair Install just using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.

Recommended for you:

• Fix Restart your computer to install important updates loop
• How To Fix File System Errors on Windows 10
• Fix Windows Update cannot currently check for updates
• Fix cannot play MOV Files on Windows Media Player

That’s it you have successfully Fix The Dependency Service or Group Failed to Start but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Fix Service Host: Lokalni sustav (svchost.exe) Visoka upotreba CPU-a i diska

• Ispravite Pozadinski inteligentni prijenos usluge se neće pokrenuti

• Popraviti uslugu inteligentnog prijenosa u pozadini koja nedostaje u uslugama

• Instalirajte uređivač grupnih pravila (gpedit.msc) na Windows 10 Home

• Ispravite pogrešku da se usluga pravila dijagnostike ne izvodi

• Popravi Host Proces za Windows usluge je prestao raditi

• Kako onemogućiti ljepljive kutove u sustavu Windows 10

• 3 načina za popravak Usluga korisničkog profila nije uspjela u grešci pri prijavi

• Popravite traku zadataka Windows 10 koja se ne skriva

• Kako stvoriti sigurnosnu kopiju slike sustava u sustavu Windows 10

• Popravite veliku upotrebu CPU-a usluge SoftThinks Agent Service u sustavu Windows 10

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Kako izbrisati particiju volumena ili diska u sustavu Windows 10

• Popravite servisnu pogrešku 1053 na Windows 10

• 3 načina za povećanje namjenskog VRAM-a u sustavu Windows 10

• Fix Service Host: Dijagnostička politika usluge Visoka upotreba CPU-a

• 5 načina za otvaranje uređivača lokalnih grupnih pravila u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Onemogućite značajku zumiranja prstiju u sustavu Windows 10