U ovom ćemo postu opisati moguća rješenja za popravljanje pogreške Service Control Managera 7001^{(Service Control Manager error 7001)} u WIndows 11/10 . Kada se pojavi ova pogreška, prijenosno računalo se zamrzava^{(laptop freezes)} i korisnici ga moraju hard resetirati. Neki korisnici su izvijestili da su se počeli suočavati s ovim problemom nakon nadogradnje sustava. Neki od korisnika također su iskusili problem nakon čiste instalacije sustava Windows 10 iz ISO slike.

The Computer Browser service depends on the Server service which failed to start because the dependency service or group failed to start.

Mogli biste vidjeti pogrešku koja se pojavljuje za:

• TCP/IP NetBIOS Helper Service
• Usluga preglednika računala
• FTP izdavačka usluga
• Usluga World Wide Web Publishing
• LDAP usluga poslužitelja web mjesta
• Microsoft NNTP usluga
• Microsoft SMTP usluga
• itd.

Service Control Manager ( SCM ) je poseban proces sustava pod Windows NT obitelji operacijskih sustava, koji pokreće, zaustavlja i stupa u interakciju s Windows servisnim procesima. Ovaj ID događaja 7001^{(Event ID 7001)} obično se vidi kada se usluga^(Service) kritična za sustav ne uspije pokrenuti jer se jedna ili više usluga o kojima je ovisna ne mogu pokrenuti^{(services on which it is dependant on, fail to start)} .

Popravite^{(Fix Service Control Manager)} pogrešku 7001 Upravitelja kontrole usluga

Ako vidite ID događaja Upravitelja kontrole usluga^{(Service Control Manager Event ID)} na svom računalu, pokušajte sa sljedećim rješenjima:

1. Pronađite^(Find) ovisnosti Windows usluge^{(Windows Service)}
2. Poboljšajte performanse vašeg sustava optimizacijom pogona.
3. Poništite TCP/IP u sustavu Windows 10.
4. Pokrenite uslugu dijeljenja Net.Tcp porta^{(Net.Tcp Port Sharing Service)} .
5. Onemogućite značajku dijeljenja TCP porta na ^{(TCP Port Sharing)}upravljačkoj ploči^{(Control Panel)} .

1] Pronađite^(Find) ovisnosti Windows usluge^{(Windows Service)}

Identificirajte^(Identify) uslugu koja nije uspjela i pronađite ovisnosti te ^{(find the Dependencies of that Service)}usluge^(Service) .

Morate otvoriti Windows Services Manager^{(open Windows Services Manager)} , odabrati dotičnu uslugu, kliknuti desnom tipkom miša na nju i odabrati Svojstva.

Prijeđite na karticu Ovisnosti.

Ovdje možete vidjeti popis usluga o kojima ovisi ova usluga i ostalih usluga koje ovise o ovoj usluzi.

Provjerite jesu li pokrenuti.

2] Poboljšajte^(Improve) performanse vašeg sustava optimizacijom pogona

Optimizacija pogona^(Drive) pomaže vam da poboljšate performanse vašeg računala. Windows 10 dolazi s ugrađenim alatom pod nazivom Defragmentiraj i optimiziraj pogone^{(Defragment and Optimize Drives)} . Ovaj alat možete koristiti za optimizaciju samo NTFS , FAT ili FAT 32 pogona.

Upišite Optimize drives u okvir za pretraživanje sustava Windows 10^{(Windows 10)} i kliknite aplikaciju da biste je pokrenuli. Nakon pokretanja aplikacije vidjet ćete postotak fragmentacije svakog diska na vašem računalu u stupcu Cu rrent status . Fragmentacija diska^(Disk) uvijek bi trebala biti manja od 10%. Ako otkrijete da je neki od vaših diskova fragmentiran više od 10%, treba ga optimizirati. Da biste optimizirali pogon, odaberite ga i kliknite na gumb Optimiziraj^(Optimize) .

Ako alat za defragmentiranje^(Defragment) i optimizaciju pogona^{(Optimize Drives)} ne prikazuje nijedan od vaših sistemskih diskova, to je zbog sljedećih razloga:

1. Disk već koristi drugi program.
2. Formatirali ste disk pomoću datotečnog sustava koji nije NTFS , FAT ili FAT 32 .
3. Pogon je mrežni pogon.
4. Disk ima neku grešku ili je možda oštećen. U tom slučaju predlažemo da popravite pogon , a zatim ga pokušate optimizirati pomoću alata za defragmentaciju diska^{(Disk Defragment)} .

3] Poništite TCP/IP u sustavu Windows 11/10

Također možete dobiti pogrešku Service Control Manager 7001 na vašem Windows 11/10 računalu kada se usluga dijeljenja Net.Tcp porta^{(Net.Tcp Port Sharing Service)} ne pokrene. Ako je to slučaj s vama, resetiranje TCP/IP-a ili internetskog protokola  može pomoći.

4] Omogućite^(Enable) uslugu dijeljenja Net.Tcp porta^{(Net.Tcp Port Sharing Service)}

Ako poništavanje TCP/IP a ili internetskog ^(Internet) protokola^(Protocol) nije riješilo problem umjesto vas, isprobajte ovu metodu. Mnogi korisnici su izvijestili da su se nakon pokretanja usluge dijeljenja TCP.Net porta^{(TCP.Net Port Sharing Service)} riješili pogreške Service Control Manager error 7001.

Slijedite dolje navedene upute:

1. Prvo morate otvoriti Konzolu za upravljanje ^{(Management Console)}uslugama^(Services) . Za to upišite u dijaloški okvir Pokreni^(Run) i kliknite U redu.services.msc
2. Sada se pomaknite prema dolje po popisu i pronađite Net.Tcp Port Service .
3. Dvaput kliknite na njega i s padajućeg izbornika odaberite njegovu vrstu pokretanja Automatski .^(Automatic)
4. Vidjet ćete status usluge. Ako je zaustavljen, kliknite na gumb Start , a zatim kliknite OK.
5. Ponovo pokrenite računalo i provjerite pomaže li.

Ako ovo nije riješilo problem, prijeđite na sljedeću metodu.

5] Onemogućite^{(Disable TCP Port Sharing)} značajku dijeljenja TCP porta na upravljačkoj ploči^{(Control Panel)}

Mnogi korisnici također su izvijestili da im je onemogućavanje značajke dijeljenja TCP porta^{(TCP Port Sharing)} na upravljačkoj ploči^{(Control Panel)} pomoglo u rješavanju problema.

Slijedite dolje navedene upute:

1. Upišite Uključi i isključi značajke sustava Windows^{(Turn Windows Features On and Off)} u okvir za pretraživanje sustava Windows 11/10 .
2. Kliknite na aplikaciju da biste je pokrenuli.
3. Proširite .NET Framework 4.6 Napredne usluge^{(.NET Framework 4.6 Advanced Services)} . U njemu ćete pronaći WCF usluge^(Services) . Međutim, pronašao sam WCF usluge^(Services) u .NET Framework 4.8 naprednim ^(Advanced) uslugama^(Services) .
4. Proširite WCF usluge^{(WCF Services)} .
5. Onemogućite značajku dijeljenja TCP porta^{(TCP Port Sharing)} tako da poništite potvrdni okvir pored nje.
6. Kliknite OK da biste spremili postavku.

Trebalo bi pomoći.

Povezani postovi^{(Related posts)} :

• Popravite pogrešku DCOM Event ID 10016^{(Fix DCOM Event ID 10016 error)}
• Ispravite pogrešku ID-a događaja 7031 ili 7034 pri odjavi^{(Fix Event ID 7031 or 7034 error on logging off)} .

Fix Service Control Manager Event ID 7001 on Windows 11/10

In this рost, we will deѕcribe the possible solutions to fix Service Control Manager error 7001 on WIndows 11/10. When this error occurs, the laptop freezes and users have to hard reset it. Some users have reported that they started facing this issue after upgrading their system. Some of the users also experienced the issue after a clean install of Windows 10 from an ISO image.

The Computer Browser service depends on the Server service which failed to start because the dependency service or group failed to start.

You could see the error occurring for:

• TCP/IP NetBIOS Helper Service
• Computer Browser service
• FTP Publishing Service
• World Wide Web Publishing Service
• Site Server LDAP Service
• Microsoft NNTP Service
• Microsoft SMTP Service
• Etc.

Service Control Manager (SCM) is a special system process under the Windows NT family of operating systems, which starts, stops, and interacts with Windows service processes. This Event ID 7001 is usually seen when a system critical Service fails to start because one or more services on which it is dependant on, fail to start.

Fix Service Control Manager error 7001

If you see Service Control Manager Event ID on your computer, try the following solutions:

1. Find dependencies of a Windows Service
2. Improve the performance of your system by optimizing drives.
3. Reset the TCP/IP in Windows 10.
4. Start the Net.Tcp Port Sharing Service.
5. Disable TCP Port Sharing feature from Control Panel.

1] Find dependencies of a Windows Service

Identify the Service that has failed and find the Dependencies of that Service.

You need to open Windows Services Manager, select the service in question, right-click on it, and select Properties.

Switch to the Dependencies tab.

Here you can see a list of services on which this service depends and other services which depend on this service.

Make sure that these are started.

2] Improve the performance of your system by optimizing the drives

Drive optimization helps you improve the performance of your computer. Windows 10 comes with a built-in tool, named Defragment and Optimize Drives. You can use this tool to optimize only the NTFS, FAT, or FAT 32 drives.

Type Optimize drives in the Windows 10 search box and click on the app to launch it. After launching the app, you will see the percentage of fragmentation of each disk on your computer in the Current status column. Disk fragmentation should always be less than 10%. If you find any of your disk(s) fragmented more than 10%, it needs to be optimized. To optimize the drive, select it and click on the Optimize button.

If the Defragment and Optimize Drives tool is not showing any of your system drive(s), it is because of the following reasons:

1. The disk is already in use by another program.
2. You have formatted the disk using a file system other than NTFS, FAT, or FAT 32.
3. The drive is the network drive.
4. The disk has some error or may be corrupted. In this case, we suggest you repair the drive and then try to optimize it using the Disk Defragment tool.

3] Reset TCP/IP in Windows 11/10

You may also get Service Control Manager error 7001 on your Windows 11/10 computer when the Net.Tcp Port Sharing Service fails to start. If this is the case with you, resetting the TCP/IP or Internet Protocol may help.

4] Enable the Net.Tcp Port Sharing Service

If resetting the TCP/IP or Internet Protocol did not fix the issue for you, try this method. Many users have reported that after starting the TCP.Net Port Sharing Service, they got rid of the error Service Control Manager error 7001.

Follow the below-listed instructions:

1. First, you have to open the Services Management Console. For this, type services.msc in the Run dialog box and click OK.
2. Now, scroll down the list and locate Net.Tcp Port Service.
3. Double-click on it and select its startup type Automatic from the drop-down menu.
4. You will see the status of the service. If it is stopped, click on the Start button and then click OK.
5. Restart your computer and see if it helps.

If this did not resolve the issue, move on to the next method.

5] Disable TCP Port Sharing feature from Control Panel

Many users have also reported that disabling the TCP Port Sharing feature from Control Panel helped them solve the issue.

Follow the instructions given below:

1. Type Turn Windows Features On and Off in the search box of Windows 11/10.
2. Click on the app to launch it.
3. Expand .NET Framework 4.6 Advanced Services. You will find WCF Services in it. However, I found the WCF Services in .NET Framework 4.8 Advanced Services.
4. Expand WCF Services.
5. Disable the TCP Port Sharing feature by unchecking the box adjacent to it.
6. Click OK to save the setting.

It should help.

Related posts:

• Fix DCOM Event ID 10016 error
• Fix Event ID 7031 or 7034 error on logging off.

Related posts

• Usluga ne pokreće pogrešku s ID-om događaja 7000, 7009, 7011

• Popravi pogrešku ID-a događaja 7031 ili 7034 kada se korisnik odjavi s računala sa sustavom Windows 10

• Popravite ID događaja 14 i 17 - neuspjeh TPM naredbe u sustavu Windows 10

• Pogreška ID-a događaja 158 - Dodjela identičnih GUID-ova diska u sustavu Windows 10

• Popravak Nije uspjelo inicijaliziranje usluge BattlEye, pogreška učitavanja upravljačkog programa (1450)

• Windows Event Log Service se ne pokreće ili je nedostupna

• Popravite pogrešku komponente Steam Service na Windows računalu

• Popravite kôd pogreške Microsoft Office 0x426-0x0

• Popravite problem NET HELPMSG 2182 s uslugom BITS u sustavu Windows 11/10

• Paket popravaka nije mogao biti registriran u sustavu Windows 11/10

• Popravite pogrešku instalacije nadogradnje sustava Windows 0x80070570 - 0x2000C

• Popravak Pogreška učitavanja steamui.dll nije uspjela u sustavu Windows 11/10

• Popravite pogrešku učitavanja aplikacije 5:0000065434 u sustavu Windows 10

• Popravak ShellExecuteEx nije uspio; pogreška koda 8235 na Windows10

• Kako popraviti pogrešku DCOM Event ID 10016 u sustavu Windows 10

• Popravite zrcalni volumen koji nedostaje nakon ponovne instalacije sustava Windows 11/10

• Popravite iTunes kod pogreške 5105, Vaš zahtjev se ne može obraditi

• Popravi Pokreni DLL: eed_ec.dll, Navedeni modul nije pronađen pogreška

• Popravak pogreške 0xC00D3E8E, svojstvo se čita samo u sustavu Windows 11/10

• Popravi naziv događaja problema BEX64 u sustavu Windows 10