Neki korisnici Windows 11/10 nakon instaliranja kumulativnog ažuriranja mogu naići na pogrešku WDF_VIOLATION ^{(WDF_VIOLATION)} Blue Screen . U ovom ćemo postu identificirati uzrok pogreške, a zatim ponuditi moguće rješenje za rješavanje BSOD pogreške.

The WDF_VIOLATION bug check has a value of 0x0000010D. This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.

WDF_VIOLATION Pogreška plavog zaslona^{(WDF_VIOLATION Blue Screen)} u Windows 11/10

U osnovi morate identificirati upravljački program koji je uzrokovao ovaj problem. Ako sam spomenut na Plavom ekranu^{(Blue Screen)} , zabilježite to. Ako ne, možda ćete morati pogledati WDF datoteku^(WDF) dump. To će dati dodatne informacije o upravljačkom programu koji je izazvao ovu provjeru bugova.

Na temelju provedene istrage otkriveno je da je greška plavog zaslona WDF_VIOLATION uzrokovana, u većini slučajeva, neispravnim upravljačkim programom HP tipkovnice ^{(WDF_VIOLATION)}HpqKbFiltr.sys koji ima poznatu nekompatibilnost s određenim HP računalima. HP-ov upravljački program tipkovnice doveden je na ove HP uređaje putem Windows Update -a .

Kada Windows Driver Framework naiđe na fatalnu pogrešku, na Windows sustavima vidite plavi zaslon WDF_VIOLATION . ^{(WDF_VIOLATION Blue Screen)}Evo što možete učiniti u vezi s tim.

Ako se možete normalno prijaviti, dobro; inače ćete se morati pokrenuti u Safe Mode^{(boot into Safe Mode)} , ući u zaslon s naprednim opcijama pokretanja^{(Advanced Startup options screen)} ili koristiti instalacijski medij za pokretanje^{(use the Installation Media to boot)} kako biste mogli izvršiti ove upute.

1] Uklonite^(Remove) ili preimenujte neispravan upravljački program HP tipkovnice^{(Faulty HP Keyboard Driver)} putem naredbenog retka^{(Command Prompt)}

Neispravan upravljački program HpqKbFiltr.sys je krivac BSOD^{(WDF_VIOLATION BSOD)} greške WDF_VIOLATION. Da biste riješili ovaj problem, morate ukloniti ili preimenovati ovaj neispravan upravljački program. Ako vaše HP računalo ima plavi ekran i ne uspijeva učitati operacijski sustav Windows , pokušajte prvo ponovno pokrenuti računalo i pokrenuti Windows 10 Recovery Environment  .

Nakon što pokrenete Windows RE , možete nastaviti na sljedeći način kako biste uklonili neispravan upravljački program HP tipkovnice;

• Odaberite Otklanjanje poteškoća^{(Troubleshoot)}  na zaslonu za popravak u okruženju za oporavak ^{(Recovery Environment)}sustava Windows 10^{(Windows 10)} .
• Odaberite Napredne opcije^{(Advanced options)}  , a zatim odaberite  Naredbeni redak^{(Command Prompt)} .
• Upišite dolje navedenu naredbu za vašu verziju sustava Windows u prozor naredbenog retka i pritisnite ^{(Command Prompt)}Enter za pokretanje naredbe.

Za 32-bitnu verziju sustava Windows:

dism /Image:C\ /Remove-Driver /Driver: C:\Windows\System32\DriverStore\FileRepository\hpqkbfiltr.inf_x86_f1527018cecbb8c2\HpqKbFiltr.inf

Za 64-bitnu verziju sustava Windows:

dism /Image:C:\ /Remove-Driver/Driver: c:\Windows\System32\driverstore\FileRepository\hpqkbfiltr.inf_amd64_714aca0508a80e9a\HpqKbFiltr.inf

Napomena:^(Note:)  Ako Windows na vašem računalu nije pohranjen na pogonu C:, zamijenite C: u gornjim naredbama odgovarajućim slovom pogona.

• Izađite iz okruženja za oporavak ^{(Recovery Environment)}sustava Windows 10^{(Windows 10)} i ponovno pokrenite računalo.

Vaše bi se računalo sada trebalo uspješno pokrenuti bez greške WDF_VIOLATION Blue Screen^{(WDF_VIOLATION Blue Screen)} .

Međutim, ako želite preimenovati^(rename) neispravan upravljački program HpqKbFiltr.sys , umjesto toga u ^{(HpqKbFiltr.sys)}Windows RE -u možete pokrenuti naredbe navedene u nastavku jednu po jednu :

cd c:\windows\system32\drivers

ren HpqKbFiltr.sys HpqKbFiltr.sys_old

Nakon uspješnog preimenovanja neispravnog upravljačkog programa, ponovno pokrenite računalo kako bi promjena stupila na snagu.

2] Instalirajte KB4468304^{(Install KB4468304)} kako biste automatski uklonili neispravan upravljački program HP tipkovnice^{(HP Keyboard Driver)}

Pogreška plavog zaslona WDF_VIOLATION prevladava na računalima sa ^{(WDF_VIOLATION)}sustavom Windows 10^{(Windows 10)} verzija 1803 i 1809. Slijedom toga, Microsoft je izdao zakrpu KB4468304 . KB4468304 zakrpa će automatski^(KB4468304) ukloniti neispravan HP upravljački program. Stoga, ako koristite HP uređaje, možete automatski instalirati zakrpu KB4468304 putem Windows Update da biste riješili problem – ili je možete preuzeti iz kataloga Microsoft Update^{(Microsoft Update Catalog)}  i instalirati ručno.

Također se preporučuje da korisnici osobnih računala nadograde na najnoviju verziju sustava Windows budući da je kraj usluge za Windows 10 v1803 bio 12. studenog^{(November 12)} 2019., a završetak usluge za v1809 12. svibnja^{(May 12)} 2020.

3] Provjerite svoje upravljačke programe

Koristite BlueScreenView da otvorite DMP datoteku koju je stvorila greška zaustavljanja WDF VIOLATION .

Morate ispitati datoteke upravljačkog programa uključene u pogrešku.

Nakon što identificirate upravljački program koji je izazvao plavi zaslon^{(Blue Screen)} , morate ga ažurirati ili vratiti .

4] Pokrenite Windows Memory Diagnostic

Pokrenite alat za dijagnostiku memorije sustava Windows^{(Windows Memory Diagnostic Tool)} da biste identificirali i popravili probleme s memorijom sustava.

5] Koristite Vraćanje sustava

Pokrenite Vraćanje sustava kako biste vratili svoje računalo na prethodno dobro stanje.

Hope this helps resolve this BSOD issue!

Fix WDF_VIOLATION Blue Screen error in Windows 11/10

Some Windows 11/10 users аfter installing a Cumulative Update might encounter the WDF_VIOLATION Blue Screen error. In this post, we will identify the cause of the error and then provide the possible solution to resolve the BSOD error.

The WDF_VIOLATION bug check has a value of 0x0000010D. This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.

WDF_VIOLATION Blue Screen error in Windows 11/10

You need to basically identify the driver which has caused this issue. If i is mentioned on the Blue Screen, make a note of it. If not, then you may need to take alook at the WDF dump file.It will yield further information on the driver that caused this bug check.

Based on investigation carried out, it has been discovered that the WDF_VIOLATION blue screen error is caused, in most cases, by a faulty HP keyboard driver HpqKbFiltr.sys which has a known incompatibility with certain HP computers. The HP keyboard driver was brought to these HP devices via Windows Update.

When Windows Driver Framework encounters a fatal error, you see the WDF_VIOLATION Blue Screen on Windows systems. Here’s what you can do about it.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Remove or Rename the Faulty HP Keyboard Driver via Command Prompt

The faulty HpqKbFiltr.sys driver is the culprit of the WDF_VIOLATION BSOD error. To address this issue, you need to remove or rename this faulty driver. If your HP computer is experiencing a blue screen and fails to load the Windows operating system, try to restart your computer and boot into Windows 10 Recovery Environment first.

Once you boot into Windows RE, you can proceed as follows to remove the faulty HP keyboard driver;

• Select Troubleshoot at the repair screen in the Windows 10 Recovery Environment.
• Select Advanced options and then choose Command Prompt.
• Type the command listed below for your version of Windows into the Command Prompt window and hit Enter to run the command.

For 32-bit version of Windows:

dism /Image:C\ /Remove-Driver /Driver: C:\Windows\System32\DriverStore\FileRepository\hpqkbfiltr.inf_x86_f1527018cecbb8c2\HpqKbFiltr.inf

For 64-bit version of Windows:

dism /Image:C:\ /Remove-Driver/Driver: c:\Windows\System32\driverstore\FileRepository\hpqkbfiltr.inf_amd64_714aca0508a80e9a\HpqKbFiltr.inf

Note: If the Windows on your computer is not stored on the C: drive, replace the C: in the above commands with the appropriate drive letter.

• Exit the Windows 10 Recovery Environment and reboot your computer.

Your PC should now boot successfully without the WDF_VIOLATION Blue Screen error.

However, if you want to rename the faulty HpqKbFiltr.sys driver, you can run the commands listed below one by one instead in the Windows RE:

cd c:\windows\system32\drivers

ren HpqKbFiltr.sys HpqKbFiltr.sys_old

After renaming the faulty driver successfully, reboot your computer for the change to take effect.

2] Install KB4468304 to remove the faulty HP Keyboard Driver automatically

The WDF_VIOLATION blue screen error is prevalent on computers running Windows 10 version 1803 and 1809. Consequently, Microsoft has released a patch KB4468304. The KB4468304 patch will remove the faulty HP driver automatically. Therefore, if you are using HP devices, you can automatically install the KB4468304 patch via Windows Update to resolve the issue – or you can download it from Microsoft Update Catalog and install it manually.

It’s also recommended that PC users upgrade to the latest Windows version since the end of service for Windows 10 v1803 was on November 12, 2019 and end of service for v1809 is on May 12, 2020.

3] Check your drivers

Use BlueScreenView to open the DMP file created by the WDF VIOLATION stop error.

You need to examine the driver files involved in the error.

Once you have identified the driver that has caused the Blue Screen, you need to either update or roll it back.

4] Run Windows Memory Diagnostic

Run the Windows Memory Diagnostic Tool to identify and repair any system memory issues.

5] Use System Restore

Run System Restore to restore your computer to a prior good point.

Hope this helps resolve this BSOD issue!

Related posts

• Popravite pogrešku Klif.sys plavog zaslona u sustavu Windows 11/10

• Popravite IZUZETAK SUSTAVA SUSTAVA Plavi zaslon na Windows 11/10

• Popravite kobnu grešku sustava c000021A u sustavu Windows 11/10

• Popravite pogrešku hardlock.sys Blue Screen Of Death u sustavu Windows 11/10

• Popravi TIMER_OR_DPC_INVALID Plavi zaslon na Windows 11/10

• Popravak POGREŠKE INPAGE PODATAKA KERNEL (Msis.SYS) u sustavu Windows 11/10

• Popravite BSOD pogreške Storport.sys u sustavu Windows 10

• Popravi crni ekran smrti u sustavu Windows 11/10; Zaglavio na crnom ekranu

• Popravi SYSTEM_SERVICE_EXCEPTION (xxxx.sys) plavi zaslon pogrešaka smrti

• Kako popraviti grešku Plavi ekran smrti u sustavu Windows 11/10

• Popravi DATA_BUS_ERROR Plavi ekran smrti u sustavu Windows 11/10

• DPC_WATCHDOG_VIOLATION Plavi zaslon u sustavu Windows 11/10

• Besplatne aplikacije za generator lažnog plavog zaslona smrti za Windows 10

• Popravi APC_INDEX_MISMATCH grešku zaustavljanja u sustavu Windows 11/10

• Popravite plavi zaslon FAT DATOTEKA (fastfat.sys) u sustavu Windows 10

• SESSION_HAS_VALID_POOL_ON_EXIT Plavi zaslon u sustavu Windows 11/10

• Riješite probleme s omjerom zaslona u sustavu Windows 11/10

• NEOČEKIVANA POGREŠKA KERNEL MODE TRAP u sustavu Windows 11/10

• Popravite pogrešku Sdbus.sys Blue Screen Of Death u sustavu Windows 11/10

• Popravite pogrešku igdkmd64.sys Plavi zaslon smrti