WmiPrvSE je akronim za Windows Management Instrumentation Provider Service . Windows Management Instrumentation ( WMI ) je komponenta operacijskog sustava Microsoft Windows koja pruža upravljačke informacije i kontrolu u poslovnom okruženju. Mnogi ljudi vjeruju da je to virus jer ponekad WmiPrvSE.exe uzrokuje veliku upotrebu CPU -a, ali to nije virus ili zlonamjerni softver, umjesto toga WmiPrvSE.exe proizvodi sam Microsoft .

Glavni problem je što se Windows zamrzava ili zaglavljuje kada WmiPrvSE.exe uzima mnogo resursa sustava, a sve druge aplikacije ili programi ostaju s malo ili bez resursa. To će uzrokovati da vaše računalo postane tromo i nećete ga moći koristiti sve, na kraju ćete morati ponovno pokrenuti računalo. Čak i nakon ponovnog pokretanja, ponekad ovaj problem neće biti riješen i ponovno ćete se suočiti s istim problemom. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti visoku upotrebu CPU^{(Fix High CPU Usage)} -a od strane WmiPrvSE.exe s dolje navedenim vodičem za rješavanje problema.

Popravi visoku upotrebu CPU-a od strane WmiPrvSE.exe

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Ponovno pokrenite Windows Management Instrumentation Service^{(Method 1: Restart Windows Management Instrumentation Service)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Na popisu pronađite Windows Management Instrumentation Service , a zatim kliknite desnom tipkom miša na nju i odaberite Restart.

3. Ovo će ponovno pokrenuti sve usluge povezane s WMI uslugama i popraviti visoku upotrebu CPU-a od strane WmiPrvSE.exe.^{(Fix High CPU Usage by WmiPrvSE.exe.)}

Metoda 2: Ponovno pokrenite druge usluge povezane s WMI^{(Method 2: Restart Other Services associated with WMI)}

1. Pritisnite tipku Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Upišite sljedeće u cmd i pritisnite Enter nakon svakog:

net stop iphlpsvc
net stop wscsvc
net stop winmgmt net ^{(net stop winmgmt)}
start winmgmt net ^{(net start winmgmt)}
start wscsvc ^{(net start wscsvc)}
net start iphlpsvc

3. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 3: Pokrenite CCleaner i Malwarebytes^{(Method 3: Run CCleaner and Malwarebytes)}

1. Preuzmite i instalirajte  CCleaner  & Malwarebytes.

2.  Pokrenite Malwarebytes^{(Run Malwarebytes)(Run Malwarebytes)} i neka skenira vaš sustav u potrazi za štetnim datotekama. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

3. Sada pokrenite CCleaner i odaberite  Custom Clean .

4. Pod Custom Clean odaberite  karticu Windows^{(Windows tab)} ,  a zatim provjerite jeste li označili zadane postavke i kliknite  Analiziraj^(Analyze) .

5.  Nakon što je analiza dovršena, provjerite jeste li sigurni da ćete ukloniti datoteke koje želite izbrisati.^{(Once Analyze is complete, make sure you’re certain to remove the files to be deleted.)}

6. Konačno, kliknite na  gumb Pokreni čistač^{(Run Cleaner)}  i pustite CCleaner da radi svojim tijekom.

7. Za dodatno čišćenje sustava  odaberite karticu Registry^{(select the Registry tab)} i provjerite je li označeno sljedeće:

8. Kliknite  gumb Skeniraj za probleme^{(Scan for Issues)}  i dopustite CCleaner -u da skenira, a zatim kliknite gumb  Popravi odabrane probleme^{(Fix Selected Issues)}  .

9. Kada CCleaner pita “ Želite li sigurnosne kopije promjena u registru? ^{(Do you want backup changes to the registry?)}”  odaberite Da^{( select Yes)} .

10. Nakon što je sigurnosno kopiranje dovršeno, kliknite gumb  Popravi sve odabrane probleme^{(Fix All Selected Issues)}  .

11. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 4: Pokrenite alat za rješavanje problema održavanja sustava^{(Method 4: Run System Maintenance Troubleshooter)}

1. Pritisnite tipku Windows Key + X i kliknite na Upravljačka ploča.^{(Control Panel.)}

2. Potražite Troubleshoot^{(Search Troubleshoot)} i kliknite na Troubleshooting.

3. Zatim kliknite na View all u lijevom oknu.

4. Kliknite i pokrenite Alat za rješavanje problema za održavanje sustava^{( Troubleshooter for System Maintenance)} .

5. Alat za rješavanje problema možda će moći popraviti visoku upotrebu CPU^{(Fix High CPU Usage)} -a pomoću WmiPrvSE.exe .

Metoda 5: locirajte proces ručno pomoću preglednika događaja^{(Method 5: Locate the process manually using Event Viewer)}

1. Pritisnite tipku Windows + R zatim upišite eventvwr.msc i pritisnite Enter da otvorite preglednik događaja.^{(Event Viewer.)}

2. Na gornjem izborniku kliknite na View , a zatim odaberite opciju Prikaži analitičke zapise i zapisnike otklanjanja pogrešaka.^{( Show Analytic and Debug Logs option.)}

3. Sada, s lijevog okna idite na sljedeće dvostrukim klikom na svaki od njih:

Applications and Services Logs > Microsoft > Windows > WMI-Activity

4. Nakon što ste u mapi WMI-Activity (provjerite jeste li je proširili dvostrukim klikom na nju) odaberite Operationally.^{(select Operationally.)}

5. U desnom oknu prozora odaberite Pogreška^(Error) na kartici Operativno^{(Operational)} i Općenito^(General) potražite ClientProcessId za tu određenu uslugu.

6. Sada imamo ID^{(Process Id)} procesa određene usluge koja uzrokuje veliku upotrebu CPU^{(High CPU)} -a, moramo onemogućiti ovu određenu uslugu^{(disable this particular service)} kako bismo riješili ovaj problem.

7. Pritisnite Ctrl + Shift + Esc zajedno da otvorite Upravitelj zadataka.

8. Prijeđite na karticu Service^{(Service tab)} i potražite ID procesa^{( Process Id)} koji ste prethodno zabilježili.

9. Krivac je usluga s odgovarajućim ID-om procesa^{(Process ID)} , pa nakon što je pronađete idite na Control Panel > Uninstall a Program.

10. Deinstalirajte određeni program^{(Uninstall the particular program)} ili uslugu povezanu s gornjim ID-om procesa^{(Process ID)} , a zatim ponovno pokrenite računalo.

Preporučeno:^{(Recommended:)}

• Popravi visoku upotrebu CPU-a od strane TiWorker.exe^{(Fix High CPU Usage By TiWorker.exe)}
• Windows se nije uspio pokrenuti. Uzrok može biti nedavna promjena hardvera ili softvera^{(Windows failed to start. A recent hardware or software change might be the cause)}
• Popravi visoku upotrebu CPU-a od strane svchost.exe (netsvcs)^{(Fix High CPU Usage by svchost.exe (netsvcs))}
• Promjena razine DPI skaliranja za zaslone u sustavu Windows 10^{(Change DPI Scaling Level for Displays in Windows 10)}

To je to, uspješno ste popravili visoku upotrebu CPU-a od strane WmiPrvSE.exe,^{(Fix High CPU Usage by WmiPrvSE.exe)} ali ako još uvijek imate bilo kakvih pitanja u vezi s ovom objavom, slobodno ih postavite u odjeljku za komentare.

Fix High CPU Usage by WmiPrvSE.exe

WmіPrvSE is the acronym for Windows Management Instrumentation Provider Service. Windows Management Instrumentation (WMI) is a component of the Microsoft Windows operating syѕtem that proνіdes manаgement іnformation and control in an enterprise environmеnt. Many people believе it’s a virus as sometimes WmiPrvSE.exe causes high CPU uѕage, but it’s nоt a virus or malware instead WmiРrvSE.exe is manufactured by Miсrosoft itself.

The main problem is that the Windows freezes or stuck when WmiPrvSE.exe is taking many system resources, and all the other apps or programs are left with a little or no resources at all. This will cause your PC to become sluggish, and you won’t be able to use it all, at last, you will have to reboot your PC. Even after a reboot, sometimes this issue will not be resolved, and you will again face the same problem. So without wasting any time let’s see how to actually Fix High CPU Usage by WmiPrvSE.exe with the below-listed troubleshooting guide.

Fix High CPU Usage by WmiPrvSE.exe

Make sure to create a restore point just in case something goes wrong.

Method 1: Restart Windows Management Instrumentation Service

1. Press Windows Key + R then type services.msc and hit Enter.

2. Find Windows Management Instrumentation Service in the list then right-click on it and select Restart.

3. This will restart all the service associated with WMI services and Fix High CPU Usage by WmiPrvSE.exe.

Method 2: Restart Other Services associated with WMI

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following into cmd and hit Enter after each one:

net stop iphlpsvc
net stop wscsvc
net stop winmgmt
net start winmgmt
net start wscsvc
net start iphlpsvc

3. Reboot your PC to save changes.

Method 3: Run CCleaner and Malwarebytes

1. Download and install CCleaner & Malwarebytes.

2. Run Malwarebytes and let it scan your system for harmful files. If malware is found, it will automatically remove them.

3. Now run CCleaner and select Custom Clean.

4. Under Custom Clean, select the Windows tab then make sure to checkmark defaults and click Analyze.

5. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.

6. Finally, click on the Run Cleaner button and let CCleaner run its course.

7. To further clean your system, select the Registry tab, and ensure the following are checked:

8. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.

9. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

10. Once your backup has completed, click on the Fix All Selected Issues button.

11. Restart your PC to save changes.

Method 4: Run System Maintenance Troubleshooter

1. Press Windows Key + X and click on Control Panel.

2. Search Troubleshoot and click on Troubleshooting.

3. Next, click on view all in the left pane.

4. Click and run the Troubleshooter for System Maintenance.

5. The Troubleshooter may be able to Fix High CPU Usage by WmiPrvSE.exe.

Method 5: Locate the process manually using Event Viewer

1. Press Windows Key + R then type eventvwr.msc and hit Enter to open Event Viewer.

2. From the top menu, click on View and then select Show Analytic and Debug Logs option.

3. Now, from the left pane navigate to the following by double-clicking on each of them:

Applications and Services Logs > Microsoft > Windows > WMI-Activity

4. Once you are under WMI-Activity folder (make sure you have expanded it by double-clicking on it) select Operationally.

5. In the right window pane select Error under Operational and General tab look for the ClientProcessId for that particular service.

6. Now we have the Process Id of the particular service causing High CPU usage, we need to disable this particular service to fix this issue.

7. Press Ctrl + Shift + Esc together to open Task Manager.

8. Switch to Service tab and look for the Process Id which you noted above.

9. The service with the corresponding Process ID is the culprit, so once you find it go to Control Panel > Uninstall a Program.

10. Uninstall the particular program or service associated with above Process ID then reboot your PC.

Recommended:

• Fix High CPU Usage By TiWorker.exe
• Windows failed to start. A recent hardware or software change might be the cause
• Fix High CPU Usage by svchost.exe (netsvcs)
• Change DPI Scaling Level for Displays in Windows 10

That’s it you have successfully Fix High CPU Usage by WmiPrvSE.exe but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Kako popraviti visoku upotrebu CPU-a u sustavu Windows 10

• Popravi visoku upotrebu CPU-a od strane svchost.exe (netsvcs)

• Kako popraviti visoku upotrebu CPU-a procesom mirovanja sustava

• 8 načina da popravite veliku upotrebu CPU-a pomoću TiWorker.exe

• Kako popraviti visoku upotrebu procesora "iastordatasvc" u sustavu Windows 10

• Popravite veliku upotrebu diska WaasMedicSVC.exe u sustavu Windows 10

• 7 načina da popravite CPU ventilator koji se ne okreće

• Kako popraviti sustavne prekide visoke potrošnje CPU-a u sustavu Windows 10

• Riješite problem s Realtek audio upravljačkim programom visoke razlučivosti

• Popravi visoki CPU upravitelja prozora radne površine (DWM.exe)

• Popravite veliku upotrebu CPU-a hosta WMI dobavljača [Windows 10]

• Kako popraviti visoku upotrebu diska hosta usluge (SysMain) u sustavu Windows 11/10

• Fix Service Host: Lokalni sustav (svchost.exe) Visoka upotreba CPU-a i diska

• Popravi sustav i komprimiranu memoriju visoke CPU, ram, disk

• Fix Windows Modules Installer Worker Visoka upotreba CPU-a

• Popravite veliku upotrebu diska Ntoskrnl.exe

• Popravite veliku upotrebu CPU-a od strane XboxStat.exe u sustavu Windows 11/10

• Riješite problem s visokom upotrebom CPU-a i diska u sustavu Windows 10

• Kako popraviti visoku iskorištenost procesora TiWorker.exe u sustavu Windows