Popravi pogrešku Uređivač registra prestao je raditi: ^{(Fix The Registry editor has stopped working error: )} ako pokrenete Regedit.exe čak i koristeći administrativne privilegije i tražite proizvoljnu, nepostojeću vrijednost, uređivač registra^{(Registry Editor)} nastavlja s pretraživanjem i ako pokušate otkazati pretraživanje, visi pa čak i ako ako ne otkažete i dalje će se smrznuti, tako da ovdje nemate puno izbora. Još jedna stvar kada pritisnete poništavanje, skočni prozor^(Window) se pojavljuje s porukom o pogrešci " Uređivač registra je prestao raditi^{(The Registry editor has stopped working)} ", a zatim se ponovno pokreće.

Sada se čini da je glavni problem duljina pronađenog potključa koji mora biti veći od 255 bajtova. Da, to je problem u starijoj verziji sustava Windows 10 , gdje je maksimalna dopuštena duljina ključa registra koji se traži 255 bajtova. Ali ponekad ova pogreška može biti uzrokovana i virusom ili zlonamjernim softverom. Dakle, bez gubljenja vremena, pogledajmo kako popraviti Urednik registra^(Registry) je prestao raditi.

Popravi Pogreška uređivača registra^(Registry) je prestala raditi

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Pokrenite vraćanje sustava^{(Method 1: Run System Restore)}

1. Pritisnite tipku Windows + R i upišite " sysdm.cpl ", a zatim pritisnite enter.

2. Odaberite karticu Zaštita sustava^{(System Protection)} i odaberite Vraćanje sustava.^{( System Restore.)}

3. Kliknite Dalje i odaberite željenu točku vraćanja sustava^{(System Restore point)} .

4. Slijedite upute na zaslonu da biste dovršili vraćanje sustava.

5. Nakon ponovnog pokretanja, možda ćete moći popraviti pogrešku uređivača registra je prestao raditi.^{(Fix The Registry editor has stopped working error.)}

Metoda 2: Pokrenite SFC i DISM^{(Method 2: Run SFC and DISM)}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

4. Opet otvorite cmd i upišite sljedeću naredbu i pritisnite enter nakon svake:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5. Pustite naredbu DISM da se pokrene i pričekajte da završi.

6. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows lokacijom vašeg izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

7. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li popraviti pogrešku Urednik registra je prestao raditi.^{(Fix The Registry editor has stopped working error.)}

Metoda 3: Pokrenite CCleaner i Malwarebytes^{(Method 3: Run CCleaner and Malwarebytes)}

1. Preuzmite i instalirajte  CCleaner  &  Malwarebytes.

2. Pokrenite Malwarebytes^{(Run Malwarebytes)}  i neka skenira vaš sustav u potrazi za štetnim datotekama.

3. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

4. Sada pokrenite  CCleaner  i u odjeljku "Cleaner", na kartici Windows , predlažemo da provjerite sljedeće odabire za čišćenje:

5. Nakon što ste se uvjerili da su odgovarajuće točke provjerene, jednostavno kliknite  Run Cleaner  i pustite CCleaner da radi svojim tijekom.

6. Za dodatno čišćenje sustava odaberite karticu Registry i provjerite je li označeno sljedeće:

7. Odaberite Skeniraj^(Scan) za problem^(Issue) i dopustite CCleaner -u da skenira, a zatim kliknite  Popravi odabrane probleme.^{(Fix Selected Issues.)}

8.Kada CCleaner pita “ Želite li sigurnosne kopije promjena u registru? ^{(Do you want backup changes to the registry?)}” odaberite Da.

9. Nakon što je sigurnosno kopiranje dovršeno, odaberite Popravi sve odabrane probleme^{(Fix All Selected Issues)} .

10. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 4: Zamijenite regedit.exe^{(Method 4: Replace regedit.exe)}

1. Prvo idite na mapu C:\Windows.old , ako mapa ne postoji, nastavite.

2. Ako nemate gornju mapu onda morate preuzeti regedit_W10-1511-10240.zip.^{(download the regedit_W10-1511-10240.zip.)}

3. Izvucite gornju datoteku na radnoj površini, zatim pritisnite tipku Windows Key + X , a zatim odaberite naredbeni redak (administrator).^{(Command Prompt (Admin).)}

4.Upišite sljedeću naredbu u cmd i pritisnite Enter :

takeown /f “C:\Windows\regedit.exe”

icacls “C:\Windows\regedit.exe” /grant “%username%”:F

5. Pritisnite tipku Windows + E da otvorite File Explorer , a zatim idite do mape C:\Windows

6. Pronađite regedit.exe , zatim ga preimenujte u regeditOld.exe i zatim zatvorite istraživač datoteka.

7. Sada ako imate mapu C:\Windows.old\Windowskopirajte regedit.exe^{(copy the regedit.exe)} iz nje u mapu C:\WindowsAko nije, kopirajte regedit.exe iz gore ekstrahirane zip datoteke u mapu C:Windows.

8. Ponovo pokrenite računalo da biste spremili promjene.

9. Pokrenite Registry Editor i možete tražiti nizove koji imaju veličinu veću od 255 bajtova.^{(have the size larger than 255 bytes.)}

Preporučeno:^{(Recommended:)}

• Popravite rušenje Regedit.exe prilikom pretraživanja kroz Registry^{(Fix Regedit.exe Crashes when searching through Registry)}
• Popravite kako numerička tipkovnica ne radi u sustavu Windows 10^{(Fix Numeric Keypad Not Working in Windows 10)}
• Fix CD/DVD Drive not able to read discs
• Zakažite isključivanje računala pomoću Planera zadataka^{(Schedule Computer Shutdown using Task Scheduler)}

To je to što ste uspješno popravili Grešku uređivača registra prestao je raditi^{(Fix The Registry editor has stopped working error)} , ali ako još uvijek imate pitanja u vezi s ovim postom, slobodno ih pitajte u odjeljku za komentare.

Fix The Registry editor has stopped working

Fix The Registry editor has stopped working error: If you run Regedit.exe even using administrative privileges and search for an arbitrary, non-existent value, the Registry Editor keeps on searching and if you try to cancel the search it hangs and even though if you don’t cancel it will still freeze, so you don’t have much of a choice here. One more thing when you press cancels a pop-up Window comes up with an error message “The Registry editor has stopped working” and then it restarts.

Now the main issue seems to be the length of the subkey found which must be more than 255 bytes. Yes, this is the problem in earlier version of Windows 10, where maximum allowed key length of the registry under search is 255 bytes. But sometimes this error can also be caused due to virus or malware. So without wasting any time let’s see how to Fix The Registry editor has stopped working.

Fix The Registry editor has stopped working error

Make sure to create a restore point just in case something goes wrong.

Method 1: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix The Registry editor has stopped working error.

Method 2: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes and see if you’re able to Fix The Registry editor has stopped working error.

Method 3: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes.

Method 4: Replace regedit.exe

1.First, navigate to the C:\Windows.old folder, if the folder doesn’t exist then continue.

2.If you don’t have the above folder then you need to download the regedit_W10-1511-10240.zip.

3.Extract the above file on the desktop then press Windows Key + X then select Command Prompt (Admin).

4.Type the following command into cmd and hit Enter:

takeown /f “C:\Windows\regedit.exe”

icacls “C:\Windows\regedit.exe” /grant “%username%”:F

5.Press Windows Key + E to open File Explorer then navigate to C:\Windows folder.

6.Find regedit.exe then rename it to regeditOld.exe and then close the file explorer.

7.Now if you have C:\Windows.old\Windows folder then copy the regedit.exe from it to C:\Windows folder. If not, then copy the regedit.exe from the above-extracted zip file to C:\Windows folder.

8.Reboot your PC to save changes.

9.Launch Registry Editor and you could search for strings which have the size larger than 255 bytes.

Recommended:

• Fix Regedit.exe Crashes when searching through Registry
• Fix Numeric Keypad Not Working in Windows 10
• Fix CD/DVD Drive not able to read discs
• Schedule Computer Shutdown using Task Scheduler

That’s it you have successfully Fix The Registry editor has stopped working error but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

Related posts

• Kako popraviti oštećeni registar u sustavu Windows 10

• Kako preuzeti potpunu kontrolu ili vlasništvo nad ključevima registra sustava Windows

• Kako izbrisati neispravne unose u registru sustava Windows

• Popravite rušenje Regedit.exe prilikom pretraživanja kroz Registry

• Kako popraviti pokvarene stavke registra u sustavu Windows 10

• Zamrzavanje indeksa iskustva u sustavu Windows [RIJEŠENO]

• Sakrij stavke s upravljačke ploče u sustavu Windows 10

• Izrada sigurnosne kopije potpune slike sustava u sustavu Windows 10 [The Ultimate Guide]

• Kako onemogućiti ili deinstalirati NVIDIA GeForce Experience

• 3 načina za povećanje namjenskog VRAM-a u sustavu Windows 10

• 3 načina da ubijete proces u sustavu Windows 10

• Kako izbrisati particiju volumena ili diska u sustavu Windows 10

• Onemogućite značajku zumiranja prstiju u sustavu Windows 10

• [POPRAVLJENO] USB pogon ne prikazuje datoteke i mape

• Kako onemogućiti ljepljive kutove u sustavu Windows 10

• Popravite crnu pozadinu radne površine u sustavu Windows 10

• Popravak radne površine odnosi se na lokaciju koja nije dostupna

• Popravite kako se upravljačka ploča NVIDIA ne otvara

• Popravi Ova kopija sustava Windows nije originalna Pogreška

• Jednostavan pregled aktivnosti Chromea na vremenskoj traci sustava Windows 10