Popravi Slika zadatka je oštećena ili je neovlaštena: ^{(Fix The task image is corrupt or has been tampered with: )} kada pokušate pokrenuti Specific Task pod Task Schedulerom^{(Task Scheduler)} , može vam dati poruku o pogrešci "Slika zadatka je oštećena ili je neovlaštena." Sama poruka navodi da je zadatak^(Task) oštećen ili da se neka aplikacija treće strane možda petlja s vašim zadacima Planera zadataka^{(Task Scheduler Tasks)} . Ova se pogreška obično javlja kada korisnici pokušavaju konfigurirati sigurnosnu kopiju na svom sustavu, ali iznenada se pojavljuje ova pogreška. Nećete moći pokrenuti ovaj određeni zadatak jer je oštećen i jedini način rješavanja ove pogreške je brisanje oštećenog zadatka.

Task Scheduler je značajka sustava Microsoft Windows koja pruža mogućnost zakazivanja pokretanja aplikacija ili programa u određeno vrijeme ili nakon određenog događaja. Ali ponekad ne prepoznaje neke od zadataka jer su ili neovlašteni ili je slika zadatka oštećena. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti ovu poruku o pogrešci Planera zadataka s dolje navedenim koracima za rješavanje problema.^{(Task Scheduler)}

Napomena:^(Note:) Ako dobivate pogrešku User_Feed_Synchronization Task , onda izravno idite na metodu 5^{(Method 5)} .

Popravi Slika zadatka je oštećena ili je neovlaštena

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Izbrišite oštećeni zadatak u Registru^{(Method 1: Delete the corrupted task in Registry)}

Napomena:^(Note:) Napravite sigurnosnu kopiju registra^{(Registry backup)} ako namjeravate izvršiti promjene u registru.

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg potključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree

3. Zadatak koji uzrokuje poruku o pogrešci " Slika zadatka je oštećena ili je neovlaštena^{(The task image is corrupt or has been tampered with)} " u Planeru zadataka^{(Task Scheduler)} trebao bi biti naveden u potključu Stablo^(Tree) .

4. Desnom tipkom miša kliknite ključ registra^{(Registry Key)} koji uzrokuje problem i odaberite Izbriši.^(Delete.)

5. Ako niste sigurni koji se ključ nalazi pod ključem registra Tree , preimenujte svaki ključ u .old i svaki put kada preimenujete određeni ključ otvorite Task Scheduler i provjerite možete li popraviti poruku o pogrešci, zadržite to radite sve dok se poruka o pogrešci više ne pojavljuje.

6. Jedan od zadataka treće strane mogao bi se oštetiti zbog čega je i nastala pogreška.

7. Sada izbrišite unose koji uzrokuju grešku Planera zadataka^{(Task Scheduler)} i problem će biti riješen.

Metoda 2: Ručno izbrišite datoteku WindowsBackup^{(Method 2: Manually Delete the WindowsBackup file)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

cd %windir%\system32\tasks\Microsoft\Windows\WindowsBackup

del AutomaticBackup

del "Windows Backup Monitor"

3. Ponovo pokrenite računalo da biste spremili promjene i ponovno otvorite sigurnosnu kopiju sustava Windows^(Windows) koja bi trebala raditi bez ikakvih pogrešaka.

Ako određeni zadatak stvara pogrešku " Slika zadatka je oštećena ili je neovlaštena^{(The task image is corrupt or has been tampered with)} ", tada možete ručno izbrisati zadatak navigacijom do sljedećeg mjesta:

1. Pritisnite Windows Key + R zatim upišite sljedeće i kliknite OK:

%windir%\system32\Tasks

2. Ako je to Microsoftov^(Microsoft) zadatak, otvorite Microsoftovu mapu^{(Microsoft folder)} s gornje lokacije i izbrišite određeni zadatak.

3. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 3: Popravite oštećene zadatke u Planeru zadataka^{(Method 3: Repair Corrupted Tasks in Task Scheduler)}

Preuzmite ovaj alat^{(Download this Tool)} koji automatski rješava sve probleme s Planerom zadataka^{(Task Scheduler)} i popravit će Slika zadatka je oštećena ili je promijenjena greškom.

Ako postoje neke pogreške koje ovaj alat ne može popraviti, onda ručno izbrišite te zadatke kako biste uspješno riješili sve probleme s Tas Schedulerom^{(Tas Scheduler)} .

Metoda 4: Ponovno kreirajte planer zadataka^{(Method 4: Re-Create Task Scheduler)}

Napomena:^(Note:) Ovo će izbrisati sve zadatke^(Tasks) i morat ćete ponovno kreirati sve zadatke^(Task) u Planeru zadataka^{(Task Scheduler)} .

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg potključa registra:

HKLM\SOFTWARE\Microsoft\Windows NT\Current Version\Schedule

3. Izbrišite sve potključeve pod Raspored^(Schedule) i zatvorite uređivač registra.

4. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 5: za korisnika koji dobiva pogrešku User_Feed_Synchronization^{(Method 5: For user’s getting User_Feed_Synchronization error)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter :

msfeedssync onemogućiti^{(msfeedssync disable)}

msfeedssync omogućiti^{(msfeedssync enable)}

3. Gornja naredba će onemogućiti, a zatim ponovno omogućiti zadatak User_Feed_Synchronization koji bi trebao riješiti problem.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi upravljački program zaslona prestao je reagirati i vratio je pogrešku^{(Fix Display driver stopped responding and has recovered error)}
• Kako popraviti opciju skrivenih atributa zasivljena^{(How to Fix Hidden Attribute option greyed out)}
• Popravi internu grešku video planera^{(Fix Video Scheduler Internal Error)}
• Aplikacije za popravke su zasivljene u sustavu Windows 10^{(Fix Apps are greyed out in Windows 10)}

To je to što ste uspješno popravili Slika zadatka je oštećena ili je izmijenjena pogreškom^{(Fix The task image is corrupt or has been tampered with error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovom objavom, slobodno ih postavite u odjeljku za komentare.

Fix The task image is corrupt or has been tampered with

Fix The task image is corrupt or has been tampered with: When you try to run Specific Task under Task Scheduler it may give you an error message “The task image is corrupt or has been tampered with.” The message itself specifies that the Task is corrupted or some 3rd party app might be messing with your Task Scheduler Tasks. This error usually occurs when users are trying to configure backup on their system but suddenly this error pops up. You won’t be able to run this specific task as it’s corrupted and the only way to deal with this error is to delete the corrupted task.

Task Scheduler is a feature of Microsoft Windows that provides the ability to schedule the launch of apps or programs at a specific time or after a particular event. But sometimes it doesn’t recognize some of the tasks because either they have been tampered with or the task image is corrupted. So without wasting any time let’s see how to actually fix this Task Scheduler error message with the below-listed troubleshooting steps.

Note: If you are getting User_Feed_Synchronization Task error then directly go to Method 5.

Fix The task image is corrupt or has been tampered with

Make sure to create a restore point just in case something goes wrong.

Method 1: Delete the corrupted task in Registry

Note: Make Registry backup if you are going to do changes in the registry.

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry subkey:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree

3.The Task that is causing the error message “The task image is corrupt or has been tampered with” in the Task Scheduler should be listed in the Tree sub-key.

4.Right-click on the Registry Key that is causing the problem and select Delete.

5.If you’re not sure which key it is then under Tree registry key, rename each key to .old and each time you rename a particular key open the Task Scheduler and see if you’re able to fix the error message, keep doing this until the error message no longer appears.

6.One of the 3rd party tasks might get corrupted because of which the error is caused.

7.Now delete the entries which are causing the Task Scheduler error and the issue will be resolved.

Method 2: Manually Delete the WindowsBackup file

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command in cmd and hit Enter after each one:

cd %windir%\system32\tasks\Microsoft\Windows\WindowsBackup

del AutomaticBackup

del “Windows Backup Monitor”

3.Reboot your PC to save changes and again open Windows backup which should run without any errors.

If a specific task is creating the error “The task image is corrupt or has been tampered with” then you could manually delete the task by navigating to the following location:

1.Press Windows Key + R then type the following and click OK:

%windir%\system32\Tasks

2.If it’s a Microsoft task then open the Microsoft folder from above location and delete the specific task.

3.Reboot your PC to save changes.

Method 3: Repair Corrupted Tasks in Task Scheduler

Download this Tool which automatically fixes all the issues with the Task Scheduler and will Fix The task image is corrupt or has been tampered with error.

If there are some errors which this tool is not able to fix then manually delete those task in order successfully fix all the issue with Tas Scheduler.

Method 4: Re-Create Task Scheduler

Note: This will delete all the Tasks and you will have to create all the Task again in Task Scheduler.

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry subkey:

HKLM\SOFTWARE\Microsoft\Windows NT\Current Version\Schedule

3.Delete all the subkeys under Schedule and close the Registry Editor.

4.Reboot your PC to save changes.

Method 5: For user’s getting User_Feed_Synchronization error

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

msfeedssync disable

msfeedssync enable

3.The above command will disable and then re-enable the User_Feed_Synchronization task which should fix the issue.

Recommended for you:

• Fix Display driver stopped responding and has recovered error
• How to Fix Hidden Attribute option greyed out
• Fix Video Scheduler Internal Error
• Fix Apps are greyed out in Windows 10

That’s it you have successfully Fix The task image is corrupt or has been tampered with error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Kako popraviti računalo ne objavljuje

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Kako prenositi Origin igre preko Steama

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Popravi Postoji problem sa sigurnosnim certifikatom ove web stranice

• Kako omogućiti ili onemogućiti Emoji ploču u sustavu Windows 10

• Zamrzavanje indeksa iskustva u sustavu Windows [RIJEŠENO]

• Onemogućite značajku zumiranja prstiju u sustavu Windows 10

• Popravak Nemogućnost otvaranja lokalnog diska (C:)

• Popravi Windows nije mogao dovršiti formatiranje

• Popravi računalo se ne pokreće sve dok se ne pokrene više puta

• Kako pogledati spremljene WiFi lozinke na Windows, macOS, iOS i Android

• 3 načina da ubijete proces u sustavu Windows 10

• Kako stvoriti sigurnosnu kopiju slike sustava u sustavu Windows 10

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Kako onemogućiti ljepljive kutove u sustavu Windows 10

• Kako potpuno deinstalirati McAfee iz Windows 10

• Kako onemogućiti vatrozid za Windows 10

• Pronađite sigurnosni identifikator (SID) korisnika u sustavu Windows 10