PAGE FAULT IN NONPAGED AREA stop pogreška može se pojaviti kada je računalo pod velikim opterećenjem. Ima provjeru grešaka ima vrijednost 0x00000050 i također može ukazivati ​​na to da je referencirana nevažeća memorija sustava. Memorijska adresa može biti pogrešna ili memorijska adresa pokazuje na oslobođenu memoriju. Neispravan^(Faulty) hardver, pogrešna usluga sustava, antivirusni softver i oštećeni NTFS volumen mogu generirati ovu vrstu pogreške.

Stop 0x00000050 (parameter1, parameter2, parameter3, parameter4), PAGE_FAULT_IN_NONPAGED_AREA

POGREŠKA STRANICE U PODRUČJU NEPAGE

This Stop message occurs when requested data is not found in memory. The system generates a fault, which normally indicates that the system looks for data in the paging file. In this circumstance, however, the missing data is identified as being located within an area of memory that cannot be paged out to disk. The system faults, but cannot find, the data and is unable to recover. Faulty hardware, a buggy system service, antivirus software, and a corrupted NTFS volume can all generate this type of error.

Ako ste nedavno dodali hardver, uklonite ga i pogledajte. Ako ste nedavno ažurirali bilo koji upravljački program vratite ga ili deinstalirajte i pogledajte. Ako to ne pomogne, nastavite.

1. Testirajte svoju memoriju

Da biste to popravili, morat ćete pokrenuti provjeru memorije^{(Memory Check)} na svom računalu. Započnite pritiskom na  kombinaciju gumba WINKEY + R  za pokretanje  uslužnog programa Run  . Zatim upišite  mdsched.exe  , a zatim pritisnite Enter .  Neće pokrenuti Windows Memory Diagnostic Tool i dat će dvije opcije-

1. Ponovo pokrenite sada i provjerite ima li problema (preporučeno)
2. Provjerite^(Check) ima li problema sljedeći put kada pokrenem računalo

Sada, prema opciji koju ste odabrali, računalo će se ponovno pokrenuti i provjeriti ima li problema s memorijom. Ako tamo naiđete na bilo kakve probleme, automatski će ih popraviti, inače ako se ne otkriju problemi, to vjerojatno nije uzrok problema.

2. Pokrenite Provjeru sistemskih datoteka

repair potentially corrupted or damaged

Također možete koristiti naš besplatni softver  FixWin  za pokretanje uslužnog programa za provjeru sistemskih datoteka^{(System File Checker)} jednim klikom.

3. Onemogućite automatsko upravljanje veličinom datoteke stranica^{(Paging File Size Management)}

Prije^(First) svega, počnite desnim klikom na  Ovo računalo. ^{(This PC. )}Ovo računalo ^{(This PC )} možete pronaći  na radnoj površini^(Desktop) ili kada ga tražite u okviru za pretraživanje Cortane^{(Cortana Search Box)} .

Zatim kliknite na  Svojstva. ^{(Properties. )}Sada u lijevom stupcu kliknite  Napredne postavke sustava.^{(Advanced system settings.)}

Provjerite^(Make) jeste li na kartici označenoj kao  Napredno.^(Advanced.)

U odjeljku pod nazivom  Performanse ^{(Performance, )} kliknite na gumb pod nazivom  Postavke.^(Settings.)

Pojavit će se novi mini prozor, i tamo idite na karticu pod nazivom  Napredno ^(Advanced ) .

U odjeljku pod nazivom  Virtualna memorija ^{(Virtual Memory, )} kliknite na gumb pod nazivom  Promjena.^(Change.)

Pojavit će se još jedan novi mini prozor. Poništite ^(Uncheck ) opciju koja navodi,  Automatski upravljaj veličinom datoteke stranične stranice za sve pogone.^{(Automatically manage paging file size for all drives.)}

Sada moramo povećati veličinu datoteke stranice^{(increase the Page FIle size)} . Da biste to učinili, udvostručite količinu memorije dodijeljene prema zadanim postavkama unutar tekstualnog polja.

Na primjer, veličina stranica za moj stroj bila je minimalna^(Minimum) kao 16 MB, pa za početnu veličinu neka bude 32 MB. Kako je preporučena vrijednost koju imamo 1907MB, maksimalnu veličinu ću napraviti negdje oko 4000MB. Ovo će sada dodijeliti više prostora za stranice na pojedinačnim pogonima.

A zatim kliknite na OK. Zatvorite^{(OK. Close)} sve prozore i ponovno pokrenite^(Reboot) računalo kako bi promjene stupile na snagu.

4. Ažurirajte svoje upravljačke programe uređaja

Postoji velika mogućnost da upravljački programi instalirani na vašem računalu nisu kompatibilni sa sustavom Windows 10^{(Windows 10)} . Ažuriranje upravljačkih programa  nije teško. Samo idite na Upravitelj uređaja^{(Device Manager)} da učinite što je potrebno. Ili možete jednostavno otići na  odjeljak Preuzimanja^(Downloads) na web-mjestu vašeg proizvođača. Nabavite sve upravljačke programe koji su noviji od onih koji su instalirani na vašem računalu.

4. Vraćanje sustava

Možete pokušati upotrijebiti Vraćanje sustava i vratiti svoje računalo u prethodno poznato stabilno stanje. Ako često ne koristite ovu značajku, uvijek je možete početi koristiti jer se svodi na vrlo pouzdano rješenje prilikom rješavanja brojnih pogrešaka.

5. Onemogućite svoje antivirusne ^(Antivirus) aplikacije^{(Applications)}

Antivirusni^(Antivirus) softver također može pokrenuti ovu Stop poruku. Onemogućite program i utvrdite hoće li to riješiti pogrešku. Možete onemogućiti Windows Defender na svom računalu ako koristite antivirusni softver treće strane, samo kliknite desnom tipkom miša na ikonu antivirusnog programa na traci^{(System Tray)} sustava na traci zadataka^(Taskbar) . Zatim odaberite opciju za onemogućavanje antivirusne zaštite na ograničeno vrijeme. Odaberite odgovarajuću opciju.

6. Provjerite ima li na disku pogreške

Oštećeni NTFS volumen također može generirati ovu pogrešku. Pokrenite chkdsk /f /ru prozoru naredbenog retka da otkrijete i popravite greške na disku.

7. Onemogućite predmemoriju memorije u BIOS-u

Otvorite BIOS i onemogućite predmemoriju memorije u BIOS- u . Pogledajte hoće li ovo pomoći.

8. Pokrenite mrežni alat za rješavanje problema s plavim zaslonom sustava Windows 10^{(Blue Screen Troubleshooter)}

Pokrenite Microsoftov alat^(Microsoft) za rješavanje problema s plavim zaslonom na mreži za Windows 10 je čarobnjak koji je namijenjen korisnicima početnicima da isprave svoje stop greške. Pomoći će vam da ispravite ovu pogrešku plavog zaslona^{(Blue Screen)} i usput nudi korisne veze.

Povezani BSOD^{(Related BSOD)} : PAGE_FAULT_IN_NONPAGED_AREA (WdFilter.sys) .

Javite nam je li ovaj post pomogao.^{(Let us know if this post helped.)}

Fix PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 error

The PAGE FAULT IN NONPAGED AREA stop error can occur when the computer is under heavy load. It has a bug check has a value of 0x00000050 and could also indicate that invalid system memory has been referenced. The memory address could be wrong, or the memory address is pointing at freed memory. Faulty hardware, a buggy system service, antivirus software, and a corrupted NTFS volume can all generate this type of error.

Stop 0x00000050 (parameter1, parameter2, parameter3, parameter4), PAGE_FAULT_IN_NONPAGED_AREA

PAGE FAULT IN NONPAGED AREA

This Stop message occurs when requested data is not found in memory. The system generates a fault, which normally indicates that the system looks for data in the paging file. In this circumstance, however, the missing data is identified as being located within an area of memory that cannot be paged out to disk. The system faults, but cannot find, the data and is unable to recover. Faulty hardware, a buggy system service, antivirus software, and a corrupted NTFS volume can all generate this type of error.

If you added any hardware recently, remove it and see. If you updated any driver recently rollback or uninstall it and see. If this does not help, proceed.

1. Test your Memory

To fix this, you will have to run the Memory Check on your computer. Start by hitting the WINKEY + R button combination to launch the Run utility. Then type in, mdsched.exe and then hit Enter. It will not launch the Windows Memory Diagnostic Tool and will give out two options-

1. Restart now and check for problems (Recommended)
2. Check for problems the next time I start my computer

Now, according to the option selected by you, the computer will restart and check for memory-based problems. If you get any issues there, it will fix it automatically else if no issues are detected, this is probably not the cause of the issue.

2. Run System File Checker

repair potentially corrupted or damaged

You can also use our freeware FixWin to Run the System File Checker utility with a click.

3. Disable Automatic Paging File Size Management

First of all, start by right-clicking on This PC. You can find This PC on your Desktop or when you search for it in the Cortana Search Box.

Then click on Properties. Now on the left column, click on Advanced system settings.

Make sure that you are in the tab labeled as Advanced.

Under the section called as Performance, click on the button called as Settings.

A new mini window will pop up, navigate to a tab called Advanced there as well.

Under the section called as Virtual Memory, click on the button called as Change.

Another new mini window will pop up. Uncheck the option stating, Automatically manage paging file size for all drives.

Now we have to increase the Page FIle size. To do that, double the amount of memory allocated by default inside of the text field.

For example, the paging size for my machine was given as Minimum as 16MB, so for the initial size, make it to 32MB. As the recommended value we have is 1907MB, I will make the maximum size somewhere around 4000MB. This will now allocate more space for paging into individual drives.

And then click on OK. Close all windows and Reboot your computer for the changes to take effect.

4. Update your Device Drivers

There is a strong possibility that the drivers installed on your computer are not compatible with Windows 10. Updating your drivers is not difficult. Just head to the Device Manager to do the needful. Or, you can just head to the Downloads section of your manufacturer’s website. Get all the drivers that are newer than what is installed on your computer.

4. System Restore

You can try to use System Restore and revert your computer to a previously known stable state. If you tend to not use this feature, you can always start using it because it comes down to being a very reliable fix when troubleshooting a number of errors.

5. Disable your Antivirus Applications

Antivirus software can also trigger this Stop message. Disable the program and determine if this resolves the error. You can disable Windows Defender on your computer if you use third-party antivirus software, just right-click on the icon of your antivirus on the System Tray of your Taskbar. Then, select the option to disable your antivirus protection for a limited time. Select the appropriate option.

6. Check the Disk for errors

A corrupted NTFS volume can also generate this error. Run chkdsk /f /r in a command prompt window to detect and repair disk errors.

7. Disable memory caching in BIOS

Open BIOS and disable memory caching in BIOS. See if this helps.

8. Run the online Windows 10 Blue Screen Troubleshooter

Run the online Windows 10 Blue Screen Troubleshooter from Microsoft is a wizard that is meant to help novice users fix their Stop Errors. It will help you fix this Blue Screen error and offers helpful links along the way.

Related BSOD: PAGE_FAULT_IN_NONPAGED_AREA (WdFilter.sys) .

Let us know if this post helped.

Related posts

• Popravite pogrešku 0xc0000142 plavog zaslona u sustavu Windows 11/10

• Popravite pogrešku Klif.sys plavog zaslona u sustavu Windows 11/10

• Popravite grešku plavog zaslona intelppm.sys u sustavu Windows 11/10

• Ispravite grešku REFS_FILE_SYSTEM Blue Screen na Windows 11/10

• Popravi BSOD pogrešku EXFAT DATOTEKA (volmgr.sys) u sustavu Windows 11/10

• SYSTEM_SERVICE_EXCEPTION (ks.sys) BSOD pogreška u sustavu Windows 11/10

• Popravite pogrešku plavog zaslona win32kfull.sys u sustavu Windows 10

• Popravite pogrešku plavog zaslona aksfridge.sys u sustavu Windows 10

• Popravite IZUZETAK SUSTAVA SUSTAVA Plavi zaslon na Windows 11/10

• Popravi TIMER_OR_DPC_INVALID Plavi zaslon na Windows 11/10

• Popravite pogrešku aksdf.sys Blue Screen of Death u sustavu Windows 11/10

• Popravite pogrešku 0xc0000135 plavog zaslona u sustavu Windows 11/10

• Popravi 0x00000667, neispravan argument BSOD pogreške naredbenog retka

• Popravi SYSTEM_SERVICE_EXCEPTION (xxxx.sys) plavi zaslon pogrešaka smrti

• Popravite pogrešku igdkmd64.sys Plavi zaslon smrti

• Popravak POGREŠKE INPAGE PODATAKA KERNEL (Msis.SYS) u sustavu Windows 11/10

• Popravite BSOD pogrešku Ntfs.sys Failed BSOD u sustavu Windows 10

• Popravi IZUZETAK USLUGE SUSTAVA (asmtxhci. sys) Greška plavog zaslona

• Popravite USBXHCI.sys grešku plavog zaslona u sustavu Windows 10

• Popravi APC_INDEX_MISMATCH grešku zaustavljanja u sustavu Windows 11/10