Ako se suočavate s pogreškom "Izvorne datoteke nisu pronađene" nakon pokretanja DISM naredbe " DISM /Online /Cleanup-Image /RestoreHealth", onda ste na pravom mjestu jer ćemo danas raspravljati o tome kako to popraviti Pitanje. Pogreška pokazuje da DISM alat ne može pronaći izvorne datoteke za popravak slike sustava Windows^(Windows) .

Sada postoje različiti razlozi zašto Windows ne može pronaći izvornu datoteku kao što je DISM alat ne može pronaći datoteke na mreži u Windows ažuriranju ili WSUS -u ili je najčešći problem taj što ste naveli pogrešnu datoteku Windows slike^{(Windows Image)} (install.wim) kao izvor popravka itd. Dakle, bez gubljenja vremena, pogledajmo kako popraviti grešku DISM izvornih datoteka^{(Fix DISM Source Files Could)} nije moguće pronaći uz helo^(Error) dolje navedenog vodiča za rješavanje problema.

^{(Fix DISM Source Files Could)}Popravi pogrešku ^(Error)DISM izvornih datoteka nije moguće pronaći

Obavezno  kreirajte točku vraćanja^{(create a restore point)} , za slučaj da nešto pođe po zlu.

Metoda 1: Pokrenite naredbu za čišćenje DISM-a^{(Method 1: Run DISM Cleanup Command)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter :

DISM /Online /Cleanup-Image /StartComponentCleanup
sfc /scannow

DISM /Online /Cleanup-Image /AnalyzeComponentStore
sfc /scannow

3. Nakon što su gore navedene naredbe gotove s obradom, upišite DISM naredbu u cmd i pritisnite Enter :

Dism /Online /Cleanup-Image /RestoreHealth

4. Provjerite možete li popraviti pogrešku DISM izvorne datoteke nije moguće pronaći^{(Fix DISM Source Files Could not be Found Error)} , ako ne, nastavite sa sljedećom metodom.

Metoda 2: Odredite točan DISM izvor^{(Method 2: Specify the Correct DISM Source)}

Većinu vremena naredba DISM ne uspije jer DISM alat traži online kako bi pronašao potrebne datoteke za popravak slike sustava Windows^(Windows) , pa umjesto toga morate navesti lokalni izvor za ispravljanje pogreške DISM izvornih datoteka nije moguće pronaći.^{(Fix DISM Source Files Could not be Found Error.)}

Prvo morate preuzeti Windows 10 ISO pomoću alata za stvaranje medija^{(Media Creation)} , a zatim izdvojiti install.wim iz install.esd datoteke pomoću naredbenog retka. Da biste slijedili ovu metodu, idite ovdje^{(go here)} , a zatim slijedite sve korake da biste izvršili ovaj zadatak. Nakon toga učinite sljedeće:

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

DISM /Online /Cleanup-Image /RestoreHealth /Source:WIM:C:\install.wim:1 /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) slovo pogona “C:” prema mjestu datoteke.

3. Pričekajte^(Wait) da DISM alat popravi pohranu komponenti za slike sustava Windows .^(Windows)

4. Sada upišite sfc /scannow u cmd prozor i pritisnite Enter kako biste pokrenuli System File Checker i dovršili proces.

5. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li popraviti grešku DISM izvornih datoteka nije moguće pronaći.^{(Fix DISM Source Files Could not be Found Error.)}

Metoda 3: Navedite alternativni izvor popravka pomoću Registra^{(Method 3: Specify an Alternative Repair Source by using Registry)}

Napomena:^(Note:) Ako koristite izdanje Windows 10 Pro ili Enterprise , slijedite sljedeću metodu da biste naveli alternativni izvor popravka^{(Alternative Repair Source)} .

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies

3. Desnom tipkom miša kliknite Policies i zatim odaberite New > key . Imenujte ovaj novi ključ kao Servisiranje^(Servicing) i pritisnite Enter.

4. Desnom tipkom miša kliknite Servisni ključ^{(Servicing key)} , a zatim odaberite New > Expandable String Value.

5. Imenujte ovaj novi niz kao LocalSourcePath , zatim dvaput kliknite da biste promijenili njegovu vrijednost u “ wim:C:\install.wim:1 ” u polju podataka o vrijednosti^(Value) i kliknite OK.

6. Ponovno desnom tipkom miša kliknite Servisni ključ, a zatim odaberite New > DWORD (32-bit) Value.

7. Imenujte ovaj novi ključ kao UseWindowsUpdate , a zatim dvaput kliknite i promijenite njegovu vrijednost na 2 u polju podataka o vrijednosti^(Value) i kliknite U redu.

8. Zatvorite Registry Editor i ponovno pokrenite računalo da biste spremili promjene.

9. Nakon što se sustav ponovno pokrene, pokrenite naredbu DISM i provjerite možete li popraviti grešku DISM izvornih datoteka nije pronađeno.^{(Fix DISM Source Files Could not be Found Error.)}

10. Ako ste uspjeli, poništite promjene unesene u registru.

Metoda 4: Odredite alternativni izvor popravka pomoću Gpedit.msc^{(Method 4: Specify an Alternative Repair Source by using Gpedit.msc)}

1. Pritisnite tipku Windows + R zatim upišite gpedit.msc i pritisnite Enter da otvorite uređivač grupnih pravila^{(Group Policy Editor)} .

2. Idite na sljedeći put u gpeditu:

Computer Configuration > Administrative Templates > System

3. Provjerite jeste li odabrali Sustavi^(System) ih u desnom oknu prozora, dvaput kliknite na “ Odredi postavke za opcionalnu instalaciju komponenti i popravak komponenti^{(Specify settings for optional component installation and component repair)} “.

4. Sada odaberite Omogućeno^(Enabled) , a zatim pod " Alternativni put izvorne datoteke^{(Alternate source file path)} " upišite:

wim:C:\install.wim:1

5. Neposredno ispod njega, označite " Nikad ne pokušavajte preuzeti korisni teret s Windows Update-^{(Never attempt to download payload from Windows Update)} a ".

6. Kliknite Primijeni, a zatim OK.

7. Zatvorite sve i ponovno pokrenite računalo da biste spremili promjene.

8. Nakon ponovnog pokretanja računala, ponovno pokrenite naredbu “ DISM /Online /Cleanup-Image /RestoreHealth ”.

Metoda 5: Popravak Instalirajte Windows 10^{(Method 5: Repair Install Windows 10)}

Ova metoda je posljednje sredstvo jer ako ništa ne uspije, onda će ova metoda sigurno popraviti sve probleme s vašim računalom. Popravak Instalirajte^{(Repair Install)} pomoću nadogradnje na mjestu kako biste popravili probleme sa sustavom bez brisanja korisničkih podataka prisutnih u sustavu. Stoga slijedite ovaj članak da biste vidjeli kako jednostavno popraviti instalirati Windows 10.^{(How to Repair Install Windows 10 Easily.)}

 Nakon što pokrenete instalaciju za popravak sustava Windows 10 , pokrenite sljedeće naredbe u cmd-u:

DISM /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth
sfc /scannow

Napomena: ^(Note:) Obavezno^(Make) otvorite naredbeni redak^{(Command Prompt)} s administratorskim^(Admin) pravima.

Metoda 6: Popravite temeljni uzrok DISM pogreške^{(Method 6: Fix the underlying cause of DISM error)}

Napomena:^(Note:) Obavezno napravite sigurnosnu kopiju svog registra^{(backup your Registry)} prije nego što izvršite bilo koji korak u nastavku.

1. Idite do sljedećeg imenika:

C:\Windows\Log\CBS

2. Dvaput kliknite na CBS datoteku^{( the CBS file)} da biste je otvorili.

3. U bilježnici, u izborniku kliknite Edit > Find.

4. Upišite Provjera spremnosti ažuriranja sustava^{(Checking System Update Readiness)} pod "Pronađi što" i kliknite Pronađi sljedeće.^{( Find Next.)}

5. U liniji Provjera spremnosti ažuriranja sustava ^{(System Update Readiness)}pronađite oštećeni paket zbog kojeg DISM ne može popraviti vaš Windows.^{(find the corrupt package because of which the DISM is unable to repair your Windows.)}

Example: In my case the corrupt package is "Microsoft-Windows-TestRoot-and-FlightSigning Package~31bf3856ad364e35~amd64~~10.0.15063.0"

6. Sada pritisnite tipku Windows Key + R zatim upišite regedit i pritisnite Enter.

7. Idite do sljedećeg ključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing

8. Provjerite jeste li odabrali Servisiranje temeljeno na komponentama,^{(Component-Based Servicing)} a zatim pritisnite Ctrl + F da otvorite dijaloški okvir za traženje.

9. Kopirajte i zalijepite oštećeni naziv paketa^{(Copy & paste the corrupt package name)} u polje Pronađi^(Find) i kliknite Pronađi sljedeće^{(Find Next)} .

10. Oštećeni paket pronaći ćete na nekoliko mjesta, ali prije nego što bilo što učinite, vratite ove ključeve registra.

11. Desnom tipkom miša kliknite svaki od ovih ključeva registra, a zatim odaberite Izvoz.^(Export.)

12. Sada desnom tipkom miša kliknite ključeve registra, a zatim odaberite Dozvole.^{(Permissions.)}

13. Odaberite Administratori^{( Administrators)} pod Grupnim^(Group) ili korisničkim imenima i zatim označite " Puna kontrola^{(Full Control)} " i kliknite Primijeni nakon čega slijedi OK.

14. Konačno, izbrišite sve ključeve registra koje ste pronašli na različitim mjestima.^{(delete all the registry keys you found at the various location.)}

15. Na svom C: pogonu^{(Search your C: drive)} potražite testne korijenske datoteke i ako ih pronađete, premjestite ih na drugo mjesto.

16. Zatvorite sve i ponovno pokrenite računalo.

17. Ponovno pokrenite naredbu “ DISM /Online /Cleanup-Image /RestoreHealth ”.

Preporučeno:^{(Recommended:)}

• Popravite DISM pogrešku 0x800f081f u sustavu Windows 10^{(Fix DISM Error 0x800f081f in Windows 10)}
• Kako vratiti NTBackup BKF datoteku na Windows 10^{(How to Restore NTBackup BKF File on Windows 10)}
• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10^{(Fix Task Host Window Prevents Shut Down in Windows 10)}
• Popravite kašnjenje pokazivača miša u sustavu Windows 10^{(Fix Mouse Pointer Lags in Windows 10)}

To je to što ste uspješno popravili DISM izvorne datoteke nije moguće pronaći pogrešku^{(Fix DISM Source Files Could not be Found Error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih pitajte u odjeljku za komentare.

Fix DISM Source Files Could not be Found Error

If yoυ’re facіng the error “The source files cоuld not be found” after running the DISM command “DISM /Online /Cleanup-Image /RestoreHealth” then you’re at the right placе as todaу we are going to discuss how to fіx the issue. The error іndiсates that the DISM tool cannot find the source files to repair a Windows image.

Now there are various reasons why Windows cannot find the source file such as the DISM tool is unable to find the files online in Windows update or WSUS or the most common issue is that you have specified a wrong Windows Image (install.wim) file as the repair source etc. So without wasting any time let’s see how to Fix DISM Source Files Could not be Found Error with the helo of the below-listed troubleshooting guide.

Fix DISM Source Files Could not be Found Error

Make sure to create a restore point, just in case something goes wrong.

Method 1: Run DISM Cleanup Command

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

DISM /Online /Cleanup-Image /StartComponentCleanup
sfc /scannow

DISM /Online /Cleanup-Image /AnalyzeComponentStore
sfc /scannow

3. Once the above commands are finished processing, type DISM command into cmd and hit Enter:

Dism /Online /Cleanup-Image /RestoreHealth

4. See if you can Fix DISM Source Files Could not be Found Error, if not then continue with the next method.

Method 2: Specify the Correct DISM Source

Most of the time the DISM command fails because the DISM tool looks online to find the required files to repair the Windows image, so instead of that, you need to specify a local source to Fix DISM Source Files Could not be Found Error.

First, you need to download Windows 10 ISO using Media Creation tool and then extract the install.wim from install.esd file using the command prompt. To follow this method, go here, then follow all the steps to accomplish this task. After that, do the following:

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter after each one:

DISM /Online /Cleanup-Image /RestoreHealth /Source:WIM:C:\install.wim:1 /LimitAccess

Note: Replace the “C:” drive letter according to the file location.

3. Wait for the DISM tool to repair the Windows image component store.

4. Now type sfc /scannow in cmd window and hit Enter to run System File Checker to complete the process.

5. Reboot your PC to save changes and see if you’re able to Fix DISM Source Files Could not be Found Error.

Method 3: Specify an Alternative Repair Source by using Registry

Note: If you’re using Windows 10 Pro or Enterprise edition, follow the next method to specify an Alternative Repair Source.

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies

3. Right-click on Policies then selects New > key. Name this new key as Servicing and hit Enter.

4. Right-click on Servicing key and then select New > Expandable String Value.

5. Name this new String as LocalSourcePath, then double-click to change it’s value to “wim:C:\install.wim:1” in the Value data field and click OK.

6. Again right-click on Servicing key and then select New > DWORD (32-bit) Value.

7. Name this new key as UseWindowsUpdate then double-click and change it’s value to 2 in the Value data field and click OK.

8. Close Registry Editor and reboot your PC to save changes.

9. Once the system boots up again run the DISM command and see if you’re able to Fix DISM Source Files Could not be Found Error.

10. If you’re successful, then undo the changes done in the registry.

Method 4: Specify an Alternative Repair Source by using Gpedit.msc

1. Press Windows key + R then type gpedit.msc and hit Enter to open Group Policy Editor.

2. Navigate to the following path in gpedit:

Computer Configuration > Administrative Templates > System

3. Make sure to select System them in the right window pane double-click on “Specify settings for optional component installation and component repair“.

4. Now select Enabled, then under “Alternate source file path” type:

wim:C:\install.wim:1

5. Just directly below it, checkmark “Never attempt to download payload from Windows Update“.

6. Click Apply, followed by OK.

7. Close everything and reboot your PC to save changes.

8. After the PC restarts, again run the “DISM /Online /Cleanup-Image /RestoreHealth” command.

Method 5: Repair Install Windows 10

This method is the last resort because if nothing works out, then, this method will surely repair all problems with your PC. Repair Install using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.

 After running the repair install of Windows 10, run the following commands in cmd:

DISM /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth
sfc /scannow

Note: Make sure to open Command Prompt with Admin rights.

Method 6: Fix the underlying cause of DISM error

Note: Make sure to backup your Registry before performing any mention below steps.

1. Navigate to the following directory:

C:\Windows\Log\CBS

2. Double click on the CBS file to open it.

3. From notepad, menu click on Edit > Find.

4. Type Checking System Update Readiness under “Find what” and click Find Next.

5. Under Checking System Update Readiness line, find the corrupt package because of which the DISM is unable to repair your Windows.

Example: In my case the corrupt package is "Microsoft-Windows-TestRoot-and-FlightSigning Package~31bf3856ad364e35~amd64~~10.0.15063.0"

6. Now press Windows Key + R then type regedit and hit Enter.

7. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing

8. Make sure to select Component-Based Servicing then press Ctrl + F to open find dialogue box.

9. Copy & paste the corrupt package name in the Find field and click Find Next.

10. You will find the corrupt package in a few locations but before doing anything, back these registry keys.

11. Right-click on each of these registry keys and then select Export.

12. Now right-click on the registry keys then select Permissions.

13. Select Administrators under Group or user names and then checkmark “Full Control” and click Apply followed by OK.

14. Finally, delete all the registry keys you found at the various location.

15. Search your C: drive for the test root files and if found, move them to another location.

16. Close everything and reboot your PC.

17. Run the “DISM /Online /Cleanup-Image /RestoreHealth” command again.

Recommended:

• Fix DISM Error 0x800f081f in Windows 10
• How to Restore NTBackup BKF File on Windows 10
• Fix Task Host Window Prevents Shut Down in Windows 10
• Fix Mouse Pointer Lags in Windows 10

That’s it you have successfully Fix DISM Source Files Could not be Found Error but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

Related posts

• Popravak Greška Ne može se spojiti na Steam mrežu

• Popravite DISM pogrešku 0x800f081f u sustavu Windows 10

• Popravite grešku DISM 87 u sustavu Windows 10

• Popravi DISM pogrešku 14098 Component Store je oštećen

• Ispravite pogrešku s nestalim preuzetim datotekama na Steamu

• Ispravite pogrešku odbijenog pristupa odredišnoj mapi

• Popravak pogreške 1603: Došlo je do fatalne pogreške tijekom instalacije

• Popravi pogrešku Minecrafta nije uspjelo napisati ispis jezgre

• Kako popraviti pogrešku odbijenog pristupa Google disku

• Popravi pogrešku alata za stvaranje medija 0x80042405-0xa001a

• Popravite šifru pogreške aktivacije sustava Office 0xC004F074

• Popravite pogrešku Windows Update 0x800704c7

• Kako popraviti grešku aplikacije 0xc000007b

• Popravi Omegle pogrešku pri povezivanju s poslužiteljem (2022)

• Popravi grešku učitavanja aplikacije Steam 3:0000065432

• Popravak Developer Mode paketa nije uspio instalirati Kod pogreške 0x80004005

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Ispravite pogrešku Windows ne može se povezati s ovom mrežom

• Popravite pogrešku vraćanja sustava 0x80070091

• Popravite pogrešku Windows Update 0x80246002