Ako naiđete na kod pogreške 0x8007042c  kada pokušavate instalirati određena ažuriranja sustava Windows^{(Windows Updates)} ili nakon neuspjele nadogradnje na Windows 11/10 sa starije verzije sustava Windows^(Windows) , onda vam ovaj post želi pomoći. Ova se pogreška također može pojaviti kada se vatrozid sustava Windows^{(Windows Firewall)} ne pokrene.

Kod pogreške^(Error) 0x8007042c označava da Windows više ne može uključiti vatrozid . Jedini način da otkrijete ovaj problem je pokušaj pokretanja Windows vatrozida^{(start Windows Firewall)} . Ako izbaci pogrešku, to znači da vaše računalo više nije zaštićeno od nepouzdanih mreža.

Neki korisnici radije koriste druge antivirusne proizvode nego sigurnosne programe koji dolaze s operacijskim sustavom Windows , a pritom automatski onemogućuju vatrozid i Windows Defender . Ovi korisnici su oni koji će najvjerojatnije naići na gornji problem. Windows vatrozid^{(Windows Firewall)} prati protok podataka u i iz vašeg računala. U sustavu Windows 10^{(Windows 10)} većina programa se ne može instalirati sve dok je vatrozid sustava Windows^{(Windows Firewall)} isključen. Windows ažuriranja^(updates) se sigurno neće instalirati kada je vatrozid isključen.

Ako dobijete pogrešku 0x8007042c prilikom pokretanja Windows vatrozida^{(Windows Firewall)} ili Windows Update u Windows 11/10 , tada usluga^(Service) ili ovisnost^(Dependency) možda neće raditi. Ako ste suočeni s ovim problemom, možete isprobati naša preporučena rješenja koja su predstavljena u nastavku u pojedinačnim odjeljcima i bez određenog redoslijeda da biste riješili problem.

Popravi pogrešku Windows Update 0x8007042c

0x8007042C -2147023828 Error_Service_Dependency_Fail, The dependency service or group failed to start

Prijedlozi koje možete isprobati su:

• Pokrenite alat za rješavanje problema Windows Update
• Provjerite status povezanih usluga ^(Services)Windows Update .

1] Pokrenite alat za rješavanje problema Windows Update^{(Run Windows Update Troubleshooter)}

Ovo rješenje zahtijeva da pokrenete ugrađeni  alat za rješavanje problema Windows Update  i provjerite pomaže li to u rješavanju problema s  pogreškom Windows Update 0x8007042c^{(Windows Update error 0x8007042c)}  .

2] Provjerite^(Check) status povezanih usluga Windows Update

Otvorite Services Manager^{(Open Services Manager)} i osigurajte sljedeća stanja povezanih usluga:

• Windows zapisnik događaja – automatski | Trčanje
• Poziv udaljenog postupka^{(Procedure Call)} ( RPC ) – Automatic |Trčanje
• Windows Update – automatski^{(Update – Automatic)} ( pokretanje pokretača^{(Trigger Start)} )

Više prijedloga ovdje^{(More suggestions here)} : Windows Update se ne uspijeva instalirati ili se neće preuzeti^{(Windows Update fails to install or will not download)} .

Popravi^{(Fix Windows Firewall)} pogrešku Windows vatrozida 0x8007042c

Windows vatrozid^(Firewall) ne može promijeniti neke od vaših postavki. Kôd pogreške^(Error) 0x8007042c

Prijedlozi koje možete isprobati su:

• Uključite Windows vatrozid^{(Windows Firewall)} i provjerite radi li usluga Windows vatrozida^{(Windows Firewall Service)}
• Ponovno registrirajte firewallapi.dll
• Disable/Uninstall 3rd sigurnosni softver treće strane.

1] Uključite ^(Turn)Windows vatrozid^{(Windows Firewall)} i provjerite radi li usluga Windows vatrozida^{(Windows Firewall Service)}

Ovo rješenje zahtijeva da  uključite vatrozid Windows Defender^{(turn on the Windows Defender Firewall)} i također osigurate da je  usluga Windows vatrozida pokrenuta^{(Windows Firewall service is running)} .

Također, možete pokušati zaustaviti i ponovno pokrenuti sljedeće usluge pomoću batch datoteke.

Evo kako:

Pritisnite tipku Windows key + R da biste pozvali dijaloški okvir Pokreni.

U dijaloškom okviru Pokreni upišite notepad i pritisnite Enter da biste otvorili Notepad.

Kopirajte i zalijepite donju sintaksu u uređivač teksta.

c config MpsSvc start= auto
sc config KeyIso start= auto
sc config BFE start= auto
sc config FwcAgent start= auto
net stop MpsSvc
net start MpsSvc
net stop KeyIso
net start KeyIso
net start Wlansvc
net start dot3svc
net start EapHostnet
net stop BFE
net start BFE
net start PolicyAgent
net start MpsSvc
net start IKEEXT
net start DcaSvcnet
net stop FwcAgent
net start FwcAgent

Spremite datoteku s imenom i dodajte ekstenziju datoteke .bat  – npr.; FIX_ERROR0x8007o42c.bat,  a u okviru  Spremi kao tip^{(Save as type)}  odaberite  Sve datoteke.^{(All Files.)}

Više puta pokrenite skupnu datoteku s administratorskim povlasticama^{(run the batch file with admin privilege)}  (desnom tipkom kliknite spremljenu datoteku i odaberite  Pokreni kao administrator^{(Run as Administrator)} iz kontekstnog izbornika) sve dok ne prijavi pogreške.

Pokušajte ponovno ažurirati i provjerite je li problem riješen. Ako ne, nastavite sa sljedećim rješenjem.

Pročitajte^(Read) : Usluga Windows vatrozida se ne pokreće^{(Windows Firewall service does not start)} .

2] Ponovno registrirajte firewallapi.dll

Ponovno registrirajte firewallapi.dll i pogledajte hoće li to pomoći. Izvršite sljedeće u povišenom CMD-u:

regsvr32 firewallapi.dll

3 ] Disable/Uninstall 3rd sigurnosni softver treće strane

Poznato je da svi AV paketi trećih strana uzrokuju ovaj problem. U ovom slučaju, da biste riješili ovaj problem, morat ćete ukloniti sve antivirusne programe trećih strana sa svog računala pomoću namjenskog  alata za uklanjanje virusa^{(antivirus removal tool)} kako biste uklonili sve datoteke povezane s vašim antivirusnim programom. Razlog je u tome što je mnogo učinkovitije i invazivnije koristiti prilagođene alate za deinstalaciju AV programa od proizvođača, ako su dostupni, kad god deinstalirate antivirusni softver, budući da postoje registri i ovisnosti, instalirani duboko unutar OS-a koji tradicionalni program za deinstalaciju upravljačke ploče^{(Control Panel)} (appwiz.cpl) može propustiti u većini slučajeva.

SAVJET^(TIP) : Ovaj post nudi više prijedloga za popravljanje poruke o pogrešci Windows vatrozida ne može promijeniti neke od vaših postavki .^{(Windows Firewall can’t change some of your settings)}

Javite nam ako vam je ovdje nešto pomoglo.
^{(Let us know if anything here helped you.)}

Fix error 0x8007042c for Windows Update or Firewall

If you’re encountering the error code 0x8007042c when trying to install certain Windows Updates or after a failed upgrade to Windows 11/10 from an older Windows version, then this post is intended to help you. This error can also occur when the Windows Firewall fails to start.

Error code 0x8007042c indicates that Windows can no longer turn on the Firewall. The only way to detect this problem is by trying to start Windows Firewall. If it throws out the errorit means that your computer is no longer protected from untrusted networks.

Some users prefer to use other antivirus products rather than the security programs that come with the Windows operating system, and in the process automatically disable the firewall and Windows Defender. These users are the ones most likely to run into the above problem. Windows Firewall monitors the flow of data into and out of your computer. In Windows 10, most programs cannot install as long as the Windows Firewall is turned off. Windows updates will most definitely not install when the firewall is turned off.

If you receive error 0x8007042c when starting Windows Firewall or Windows Update on Windows 11/10, then a Service or Dependency may not be working. If you’re faced with this issue, you can try our recommended solutions presented below in the individual sections and in no particular order to resolve the issue.

Fix Windows Update error 0x8007042c

0x8007042C -2147023828 Error_Service_Dependency_Fail, The dependency service or group failed to start

The suggestions you could try are:

• Run Windows Update Troubleshooter
• Check the status of related Windows Update Services.

1] Run Windows Update Troubleshooter

This solution requires you to run the inbuilt Windows Update Troubleshooter and see if that helps to resolve the Windows Update error 0x8007042c issue.

2] Check the status of related Windows Update Services

Open Services Manager and ensure the following states of related Services:

• Windows Event Log  – Automatic | Running
• Remote Procedure Call (RPC) – Automatic | Running
• Windows Update – Automatic (Trigger Start)

More suggestions here: Windows Update fails to install or will not download.

Fix Windows Firewall error 0x8007042c

Windows Firewall can’t change some of your settings. Error code 0x8007042c

The suggestions you could try are:

• Turn on Windows Firewall & make sure Windows Firewall Service is running
• Re-register firewallapi.dll
• Disable/Uninstall 3rd party security software.

1] Turn on Windows Firewall & make sure Windows Firewall Service is running

This solution requires you turn on the Windows Defender Firewall and also ensure that the Windows Firewall service is running.

Also, you could try to stop and restart the following services using a batch file.

Here’s how:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type notepad and hit Enter to open Notepad.

Copy and paste the syntax below into the text editor.

c config MpsSvc start= auto
sc config KeyIso start= auto
sc config BFE start= auto
sc config FwcAgent start= auto
net stop MpsSvc
net start MpsSvc
net stop KeyIso
net start KeyIso
net start Wlansvc
net start dot3svc
net start EapHostnet
net stop BFE
net start BFE
net start PolicyAgent
net start MpsSvc
net start IKEEXT
net start DcaSvcnet
net stop FwcAgent
net start FwcAgent

Save the file with a name and append the .bat file extension – eg; FIX_ERROR0x8007o42c.bat, and on the Save as type box select All Files.

Repeatedly run the batch file with admin privilege (right-click the saved file and select Run as Administrator from the context menu) until it reports no errors.

Try updating again and see if the issue is resolved. If not proceed with the next solution.

Read: Windows Firewall service does not start.

2]  Re-register firewallapi.dll

Re-register the firewallapi.dll and see if that helps. Execute the following in an elevated CMD:

regsvr32 firewallapi.dll

3] Disable/Uninstall 3rd party security software

Third-party AV suites are all known to cause this particular issue. In this case, to fix this issue, you’ll have to remove all third-party antivirus programs from your PC using the dedicated antivirus removal tool to remove all files associated with your antivirus program. The reason is, it’s much more efficient and invasive to use the custom uninstall tools for the AV program from the manufacturer, if available, whenever uninstalling antivirus software, as there are registries and dependencies, installed deep within the OS which the traditional Control Panel uninstaller (appwiz.cpl) might miss in most cases.

TIP: This post offers more suggestions to fix Windows Firewall can’t change some of your settings error message.

Let us know if anything here helped you.

Related posts

• Gumb za rješavanje problema na stranici Windows Update

• Ispravite pogrešku 0x80071a2d Windows Update

• Ispravite pogrešku Windows Update 0x80070422 u sustavu Windows 10

• Ispravite pogrešku Windows Update 0x8e5e03fa u sustavu Windows 10

• Popravite pogrešku ažuriranja sustava Windows 10 0x800703F1

• Popravite pogrešku Windows Update 0x800703ee

• Popravite pogrešku Windows Update 0x80245006 u sustavu Windows 11 ili Windows 10

• Blokirajte nepodržani hardverski skočni prozor u Windows Update

• Popravite pogrešku Windows Update 0x800f0905

• Popravite pogrešku Windows Update 0x80072EE2

• Popravite pogrešku Windows Update 0xc0020036 u sustavu Windows 10

• Popravite pogrešku Windows Update 0x8007010b

• Popravite šifru pogreške usluge Windows Server Update Services 0x80072EE6

• Popravite pogrešku Windows Update 0x800706ba u sustavu Windows 11/10

• Kako pauzirati Windows Update u sustavu Windows 11/10 do 365 dana

• Ispravite pogrešku Windows Update 0x80070659

• Ispravite pogreške Windows Update pomoću Microsoftovog online alata za rješavanje problema

• Popravite kôd pogreške Windows Update 800F0A13

• Ispravite pogrešku Windows Update 0x80246002 u sustavu Windows 10

• Instalacija Windows Update s kodom pogreške 0x8024200D nije uspjela