Popravak Host Process za Windows Services je prestao raditi: ^{(Fix Host Process for Windows Services has stopped working: )} Većina korisnika susreće se s ovim problemom gdje se pojavljuje poruka o pogrešci koja kaže " Host Process za Windows Services je prestao raditi i zatvoren je." Kako poruka o pogrešci nema priložene informacije, nema posebnog razloga zašto je ova pogreška nastala. Da biste dobili više informacija o ovoj pogrešci, morate otvoriti Prikaz povijesti pouzdanosti^{(View Reliability History)} i provjeriti uzrok ovog problema. Ako ne pronađete odgovarajuće informacije, morate otvoriti Even Viewer kako biste došli do temeljnog uzroka ove poruke o pogrešci.

Nakon što ste proveli puno vremena, istražujući ovu pogrešku, čini se da je uzrokovana zbog sukoba programa treće strane sa sustavom Windows^(Windows) , drugo moguće objašnjenje bi bilo oštećenje memorije ili bi neke važne Windows usluge mogle biti oštećene. Većina korisnika je dobivala ovu poruku o pogrešci nakon ažuriranja sustava Windows^(Windows) , što se čini da su datoteke BITS ( pozadinska inteligentna usluga prijenosa^{(Background Intelligent Transfer Service)} ) možda oštećene. U svakom slučaju, moramo ispraviti poruku o pogrešci, pa bez gubljenja vremena pogledajmo kako zapravo popraviti Host Proces^{(Fix Host Process)} za Windows Services je prestao raditi pogrešku s dolje navedenim koracima za rješavanje problema.

Popravi Host Proces^{(Fix Host Process)} za Windows usluge^(Services) je prestao raditi

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Otvorite preglednik događaja ili povijest pouzdanosti^{(Method 1: Open Event Viewer or Reliability History)}

1. Pritisnite tipku Windows + R zatim upišite eventvwr i pritisnite Enter da otvorite preglednik događaja.^{(Event Viewer.)}

2. Sada s lijevog izbornika dvaput kliknite Windows^{(Windows Logs)} zapisi, a zatim provjerite zapisnike aplikacija i sustava.^{(Application and System logs.)}

3. Potražite događaje označene crvenim X^{(red X)} pokraj njih i provjerite detalje o pogrešci koji uključuju poruku o pogrešci " Proces hosta za Windows je prestao raditi. ^{(Host process for Windows has stopped working.)}“

4. Nakon što se usredotočite na problem, možemo početi rješavati problem i riješiti problem.

Ako niste pronašli nikakve vrijedne informacije o pogrešci, možete otvoriti Povijest pouzdanosti^{(Reliability history)} da biste dobili bolji uvid u pogrešku.

1.U Windows Search upišite ^{(Windows Search)}Pouzdanost^{(Reliability)} i kliknite na Prikaži povijest pouzdanosti^{( View Reliability History)} u rezultatu pretraživanja.

2. Potražite događaj s porukom o pogrešci " Proces hosta za Windows je prestao raditi. ^{(Host process for Windows has stopped working.)}“

3. Zabilježite uključeni proces i slijedite dolje navedene korake za rješavanje problema kako biste riješili problem.

4. Ako su gore navedene usluge povezane s trećom stranom, svakako deinstalirajte uslugu s upravljačke ploče^{(Control Panel)} i provjerite možete li riješiti problem.

Metoda 2: Izvedite čisto pokretanje^{(Method 2: Perform a Clean Boot)}

Ponekad softver treće strane može biti u sukobu sa sustavom^(System) i stoga se sustav^(System) možda neće u potpunosti isključiti. Kako bi popravak Host Process za Windows Services prestao raditi pogrešku^{(Fix Host Process for Windows Services has stopped working error)} , morate izvesti čisto pokretanje^{(perform a clean boot)} na računalu i dijagnosticirati problem korak po korak.

Metoda 3: Pokrenite vraćanje sustava^{(Method 3: Run System Restore)}

1. Pritisnite tipku Windows + R i upišite " sysdm.cpl ", a zatim pritisnite enter.

2. Odaberite karticu Zaštita sustava^{(System Protection)} i odaberite Vraćanje sustava.^{( System Restore.)}

3. Kliknite Dalje i odaberite željenu točku vraćanja sustava^{(System Restore point)} .

4. Slijedite upute na zaslonu da biste dovršili vraćanje sustava.

5. Nakon ponovnog pokretanja, možda ćete moći popraviti grešku Host Process za Windows Services je prestao raditi.^{(Fix Host Process for Windows Services has stopped working error.)}

Metoda 4: Pokrenite DISM alat^{(Method 4: Run DISM Tool)}

Nemojte pokretati SFC jer će on zamijeniti datoteku Microsoft Opencl.dll s Nvidia -om što čini se da uzrokuje ovaj problem. Ako trebate provjeriti integritet sustava, pokrenite DISM Checkhealth naredbu.

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Isprobajte ove naredbe sin slijed:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3.Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows lokacijom vašeg izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

4. Nemojte pokretati SFC /scannow kako biste provjerili integritet naredbe za pokretanje sustava DISM :

Dism /Online /Cleanup-Image /CheckHealth

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 5: Pokrenite CCleaner i Malwarebytes^{(Method 5: Run CCleaner and Malwarebytes)}

1. Preuzmite i instalirajte  CCleaner  &  Malwarebytes.

2. Pokrenite Malwarebytes^{(Run Malwarebytes)}  i neka skenira vaš sustav u potrazi za štetnim datotekama.

3. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

4. Sada pokrenite  CCleaner  i u odjeljku "Cleaner", na kartici Windows , predlažemo da provjerite sljedeće odabire za čišćenje:

5. Nakon što ste se uvjerili da su odgovarajuće točke provjerene, jednostavno kliknite  Run Cleaner  i pustite CCleaner da radi svojim tijekom.

6. Za dodatno čišćenje sustava odaberite karticu Registry i provjerite je li označeno sljedeće:

7. Odaberite Skeniraj^(Scan) za problem^(Issue) i dopustite CCleaner -u da skenira, a zatim kliknite  Popravi odabrane probleme.^{(Fix Selected Issues.)}

8.Kada CCleaner pita “ Želite li sigurnosne kopije promjena u registru? ^{(Do you want backup changes to the registry?)}” odaberite Da.

9. Nakon što je sigurnosno kopiranje dovršeno, odaberite Popravi sve odabrane probleme^{(Fix All Selected Issues)} .

10. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 6: Popravite oštećene BITS datoteke^{(Method 6: Repair Corrupted BITS files)}

1. Pritisnite Windows Key + R zatim upišite sljedeće i pritisnite Enter:

\Programdata\Microsoft\network\downloader

2. Tražit će dopuštenje pa kliknite Nastavi.^(Continue.)

3. U mapi Downloader izbrišite sve datoteke koje počinju s Qmgr^{(any file that begins with Qmgr)} , na primjer, Qmgr0.dat , Qmgr1.dat itd.

4. Nakon uspješnog brisanja gore navedenih datoteka odmah pokrenite Windows ažuriranje.

5. Ako ne možete izbrisati gornje datoteke, slijedite članak Microsoft KB o tome kako popraviti oštećene BITS datoteke.^{(how to repair the corrupt BITS files.)}

Metoda 7: Pokrenite Memtest86^{(Method 7: Run Memtest86)}

Napomena:^(Note:) Prije početka provjerite imate li pristup drugom računalu jer ćete morati preuzeti i snimiti softver na disk ili USB flash pogon. Najbolje je ostaviti računalo preko noći kada izvodite memtest jer će vjerojatno trebati neko vrijeme.

1. Spojite USB flash pogon na svoj sustav.

2.Preuzmite i instalirajte Windows Memtest86  Auto-installer za USB ključ^{(Windows Memtest86 Auto-installer for USB Key)} .

3. Desnom tipkom miša kliknite na slikovnu datoteku koju ste upravo preuzeli i odaberite opciju “ Extract here ”.

4. Nakon što ste raspakirani, otvorite mapu i pokrenite Memtest86+ USB Installer .

5. Odaberite svoj priključeni USB pogon za snimanje softvera MemTest86 (ovo će formatirati vaš USB pogon).

6. Kada se gornji proces završi, umetnite USB u računalo na kojem je Host Process za Windows Services prestao raditi postoji greška^{(Host Process for Windows Services has stopped working error)} .

7. Ponovno pokrenite računalo i provjerite je li odabrano pokretanje s USB flash pogona.

8.Memtest86 će započeti testiranje na oštećenje memorije u vašem sustavu.

9. Ako ste prošli sve testove, možete biti sigurni da vaša memorija radi ispravno.

10. Ako su neki od koraka bili neuspješni tada će Memtest86 pronaći oštećenje memorije što znači da je gornja pogreška ^{(the above error is )} zbog loše/oštećene memorije.

11. Kako biste popravili  pogrešku Host Process za Windows Services je prestao raditi^{( Fix Host Process for Windows Services has stopped working error)} , morat ćete zamijeniti RAM ako se pronađu loši memorijski sektori.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravite crne kvadrate iza ikona mapa^{(Fix Black Squares Behind Folder Icons)}
• Popravak usluge Planer zadataka nije dostupna pogreška^{(Fix Task Scheduler service is not available error)}
• Kako popraviti Windows 10 se neće potpuno ugasiti^{(How to Fix Windows 10 will not shut down completely)}
• Popravite Windows tipkovni prečaci koji ne rade^{(Fix Windows Keyboard Shortcuts Not Working)}

To je to što ste uspješno popravili pogrešku Host Process za Windows Services je prestao raditi^{( Fix Host Process for Windows Services has stopped working error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix Host Process for Windows Services has stopped working

Fix Host Process for Windows Services has stopped working: Most of the users are facing this issue where an error message pops up saying “Host Process for Windows Services has stopped working and was closed.” As the error message doesn’t have any information attached to it, so there is no particular cause as to why this error is caused. In order to get more information about this error, you need to open View Reliability History and check the cause of this issue. If you don’t find the proper information then you need to open Even Viewer to get to the root cause of this error message.

After spending a lot of time, researching about this error it seems like it caused because of 3rd party program conflicting with Windows, another possible explanation would be memory corruption or some important Windows services might be corrupted. Most of the users were getting this error message after Windows update which seems to be because of BITS (Background Intelligent Transfer Service) files might be corrupted. In any case, we need to fix the error message, so without wasting any time let’s see how to actually Fix Host Process for Windows Services has stopped working error with the below-listed troubleshooting steps.

Fix Host Process for Windows Services has stopped working

Make sure to create a restore point just in case something goes wrong.

Method 1: Open Event Viewer or Reliability History

1.Press Windows Key + R then type eventvwr and hit Enter to open Event Viewer.

2.Now from the left-hand menu double click Windows Logs then check Application and System logs.

3.Look for the events marked with red X next to them and make sure to check the error details which includes error message “Host process for Windows has stopped working.“

4.Once you have zeroed into the issue we can start troubleshooting the problem and fix the issue.

If you didn’t find any valuable information about the error, you could open Reliability history to get a better insight about the error.

1.Type Reliability in the Windows Search and click on View Reliability History in the search result.

2.Search for the event with an error message “Host process for Windows has stopped working.“

3.Note down the process involved and follow the below-listed troubleshooting steps to fix the issue.

4.If the above services are related to the 3rd party then make sure to uninstall the service from Control Panel and see if you’re able to fix the issue.

Method 2: Perform a Clean Boot

Sometimes 3rd party software can conflict with System and therefore the System might not shut down completely. In order Fix Host Process for Windows Services has stopped working error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 3: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow on screen instruction to complete system restore.

5.After reboot, you may be able to Fix Host Process for Windows Services has stopped working error.

Method 4: Run DISM Tool

Don’t run SFC as it will replace Microsoft Opencl.dll file with Nvidia which seems to be causing this issue. If you need to check the integrity of the system run DISM Checkhealth command.

1.Press Windows Key + X then select Command Prompt (Admin).

2.Try these command sin sequence:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3.If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

4.Don’t run SFC /scannow in order to verify the integrity of system run DISM command:

Dism /Online /Cleanup-Image /CheckHealth

5.Reboot your PC to save changes.

Method 5: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes.

Method 6: Repair Corrupted BITS files

1.Press Windows Key + R then type the following and hit Enter:

\Programdata\Microsoft\network\downloader

2.It will ask for permission so click Continue.

3.In the Downloader folder, delete any file that begins with Qmgr, for example, Qmgr0.dat, Qmgr1.dat etc.

4.After successfully able to delete the above files immediately run Windows update.

5.If you are not able to delete the above files then follow the Microsoft KB article on how to repair the corrupt BITS files.

Method 7: Run Memtest86

Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running memtest as it sure likely to takes some time.

1.Connect a USB flash drive to your system.

2.Download and install Windows Memtest86 Auto-installer for USB Key.

3.Right-click on the image file which you just downloaded and select “Extract here” option.

4.Once extracted, open the folder and run the Memtest86+ USB Installer.

5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).

6.Once the above process is finished, insert the USB to the PC in which Host Process for Windows Services has stopped working error is present.

7.Restart your PC and make sure that boot from the USB flash drive is selected.

8.Memtest86 will begin testing for memory corruption in your system.

9.If you have passed all the test then you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means the above error is because of bad/corrupt memory.

11.In order to Fix Host Process for Windows Services has stopped working error, you will need to replace your RAM if bad memory sectors are found.

Recommended for you:

• Fix Black Squares Behind Folder Icons
• Fix Task Scheduler service is not available error
• How to Fix Windows 10 will not shut down completely
• Fix Windows Keyboard Shortcuts Not Working

That’s it you have successfully Fix Host Process for Windows Services has stopped working error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravite host proces za postavljanje sinkronizacije

• Popravite visoku upotrebu CPU-a u procesu servisiranja DISM hosta

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Fix Service Host: Lokalni sustav (svchost.exe) Visoka upotreba CPU-a i diska

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Popravite Windows 7 ažuriranja koja se ne preuzimaju

• Popravite ponovno pokretanje Windows računala bez upozorenja

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Kako popraviti Firefox koji ne reproducira videozapise (2022)

• 7 načina da popravite kritični proces koji je umro u sustavu Windows 10

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Popravite problem s upravljačkim programom kontrolera univerzalne serijske sabirnice (USB).

• 3 načina da ubijete proces u sustavu Windows 10

• Popravite kako se upravljačka ploča NVIDIA ne otvara

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Popravite aplikaciju usluge i kontroler Visoka upotreba procesora u sustavu Windows 11/10

• Popravi USB se neprestano odvaja i ponovno povezuje

• Popravi pogrešku Host aplikacije je prestala raditi

• Fix Service Host: Dijagnostička politika usluge Visoka upotreba CPU-a

• Popravi računalo se ne pokreće sve dok se ne pokrene više puta