Ako se ne možete povezati s internetom ili se suočite s ograničenim problemom s internetskom vezom, velika je vjerojatnost da je DHCP ( protokol dinamičke konfiguracije hosta^{(Dynamic Host Configuration Protocol)} ) klijent možda onemogućen. Da biste to potvrdili, pokrenite dijagnostiku mreže i alat za rješavanje problema će se zatvoriti s porukom o pogrešci DHCP nije omogućen za "WiFi" ili DHCP nije omogućen za "Bežičnu mrežnu vezu".

Protokol za dinamičku konfiguraciju hosta^{(Dynamic Host Configuration Protocol)} ( DHCP ) je mrežni protokol kojim upravlja DHCP poslužitelj koji dinamički distribuira parametre mrežne konfiguracije, kao što su IP adrese, svim klijentima s omogućenim DHCP -om. ^(DHCP)DHCP poslužitelj pomaže u smanjenju potrebe da mrežni administrator ručno konfigurira ove postavke.

Sada u sustavu Windows 10 ^{(Windows 10)}DHCP je omogućen prema zadanim postavkama, ali ako ga onemoguće neke aplikacije treće strane ili možda virus, vaša bežična^(Wireless) pristupna točka neće pokretati DHCP poslužitelj, koji zauzvrat neće automatski dodijeliti IP adresu i vi ste pobijedili ne mogu pristupiti internetu. Dakle, bez gubljenja vremena, pogledajmo kako popraviti da DHCP^{(Fix DHCP)} nije omogućen za WiFi u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Popravi DHCP^{(Fix DHCP)} nije omogućen za WiFi u sustavu Windows 10^{(Windows 10)}

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Nakon svake od metoda, provjerite je li DHCP omogućen ili ne, kako biste to učinili, slijedite ovaj vodič:

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter :

ipconfig /all

3. Pomaknite se prema dolje do Wi-Fi adaptera za bežični LAN^{(Wireless LAN adapter Wi-Fi)} i pod DHCP Enabled trebalo bi glasiti " da^(yes) ".

4. Ako vidite “ Ne^(No) ” pod DHCP Enabled , onda metoda nije uspjela i morate isprobati i druga rješenja.

Metoda 1: Pokrenite alat za rješavanje problema s mrežom^{(Method 1: Run Network Troubleshooter)}

1. Pritisnite tipku Windows + R zatim upišite ncpa.cpl i pritisnite Enter da otvorite Mrežne veze^{(Network Connections)} .

2. Desnom tipkom miša kliknite svoju Wifi vezu^{(Wifi Connection)} i odaberite Dijagnosticiranje.^(Diagnose.)

3. Pustite da se pokrene alat za rješavanje problema s mrežom^{(Network Troubleshooter)} i on će vam dati sljedeću poruku o pogrešci: DHCP nije omogućen za "Bežičnu mrežnu vezu".^{(DHCP is not enabled for “Wireless Network Connection”.)}

4. Sada kliknite na Next kako biste riješili probleme. Također, kliknite na " Pokušajte ovo popraviti kao administrator^{(Try This Repairs as an Administrator)} ".

5. U sljedećem upitu kliknite Primijeni ovaj popravak.^{( Apply this Fix.)}

6. Ponovo pokrenite računalo da biste spremili promjene i provjerite možete li popraviti da DHCP nije omogućen za WiFi u sustavu Windows 10.^{(Fix DHCP is not enabled for WiFi in Windows 10.)}

Metoda 2: Omogućite DHCP putem postavki mrežnog adaptera^{(Method 2: Enable DHCP via Network Adapter Settings)}

1. Pritisnite tipku Windows + R zatim upišite ncpa.cpl i pritisnite Enter.

2. Desnom tipkom miša kliknite svoju Wifi vezu^{(Wifi Connection)} i odaberite Svojstva.^{(Properties.)}

3. U prozoru Wi-Fi svojstva odaberite Internet Protocol Version 4 i kliknite Svojstva.^{(Properties.)}

4. Sada provjerite kvačicom^(checkmark) “ Dobij IP adresu automatski^{(Obtain an IP address automatically)} ” i “Dobij adresu DNS poslužitelja automatski”.

5. Kliknite OK , zatim ponovno kliknite U redu i kliknite Zatvori^(Close) .

6. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 3: Omogućite uslugu DHCP klijenta^{(Method 3: Enable DHCP client service)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Pronađite DHCP klijenta^{(DHCP Client)} na ovom popisu, a zatim dvaput kliknite na njega da otvorite njegova svojstva.

3. Provjerite je li tip pokretanja postavljen na Automatski^{(Startup type is set to Automatic)} i kliknite Start ako usluga već nije pokrenuta.

4. Kliknite Primijeni, a zatim OK.

5. Ponovno pokrenite računalo da biste spremili promjene i provjerite možete li popraviti DHCP nije omogućen za WiFi u sustavu Windows 10.^{( Fix DHCP is not enabled for WiFi in Windows 10.)}

Metoda 4: Privremeno onemogućite antivirusni i vatrozid^{(Method 4: Temporarily Disable Antivirus and Firewall)}

Ponekad antivirusni^(Antivirus) program može uzrokovati  pogrešku^{(an error )} , a kako biste provjerili da to ovdje nije slučaj, morate onemogućiti antivirusni program na ograničeno vrijeme kako biste mogli provjeriti pojavljuje li se pogreška i dalje kada je antivirusni program isključen.

1. Desnom tipkom miša kliknite ikonu  Antivirusnog programa^{( Antivirus Program icon)}  na traci sustava i odaberite  Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će  Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno se pokušajte povezati kako biste otvorili Google Chrome i provjerite je li pogreška riješena ili ne.

4. Potražite upravljačku ploču na traci za pretraživanje izbornika Start^{(Start Menu)} i kliknite na nju da biste otvorili  upravljačku ploču.^{( Control Panel.)}

5. Zatim kliknite na  Sustav i sigurnost^{( System and Security)} ,  a zatim kliknite na  Windows vatrozid.^{(Windows Firewall.)}

6. Sada u lijevom oknu prozora kliknite na  Uključi ili isključi Windows vatrozid.^{( Turn Windows Firewall on or off.)}

7.  Odaberite Isključi Windows vatrozid i ponovno pokrenite računalo.^{(Select Turn off Windows Firewall and restart your PC.)}

Ponovno pokušajte otvoriti Google Chrome i posjetite web-stranicu koja je ranije pokazivala  pogrešku. ^( error. )Ako gornja metoda ne radi, svakako slijedite iste korake kako biste  ponovno uključili vatrozid.^{( turn on your Firewall again.)}

Metoda 5: Poništite izbor proxyja^{(Method 5: Uncheck Proxy)}

1. Pritisnite tipku Windows Key + R zatim upišite “ inetcpl.cpl ” i pritisnite enter da otvorite Internet Properties.

2. Zatim idite na karticu Veze^{(Connections tab)} i odaberite LAN postavke.

3. Poništite opciju Koristi^{(Uncheck Use)} proxy poslužitelj^{(Proxy Server)} za svoj LAN i provjerite je li označeno " Automatski otkrij postavke^{(Automatically detect settings)} ".

4. Kliknite Ok^{(Click Ok)} , a zatim Primijeni^(Apply) i ponovno pokrenite računalo.

Metoda 6: Resetirajte Winsock  ^{(Method 6: Reset Winsock )}and TCP/IP

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Opet^(Again) otvorite Admin Command Prompt i upišite sljedeće i pritisnite enter nakon svakog:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

3. Ponovno pokrenite da biste primijenili promjene. Čini se da naredba Netsh Winsock Reset popravlja DHCP nije omogućen za WiFi u sustavu Windows 10.^{(Fix DHCP is not enabled for WiFi in Windows 10.)}

Metoda 7: Ponovno instalirajte mrežni upravljački program^{(Method 7: Reinstall your Network driver)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter.

2. Proširite Mrežni^{(Expand Network)} adapteri, a zatim desnom tipkom miša kliknite svoj WiFi adapter i odaberite Deinstaliraj.^(Uninstall.)

3. Ponovno kliknite Deinstaliraj^(Uninstall) za potvrdu.

4. Sada desnom tipkom miša kliknite Mrežni adapteri^{(Network Adapters)} i odaberite Skeniraj promjene hardvera.^{(Scan for hardware changes.)}

5. Ponovno pokrenite računalo i Windows će automatski instalirati zadane upravljačke programe.

Metoda 8: Ažurirajte upravljačke programe bežičnog adaptera^{(Method 8: Update Wireless Adapter drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter.

2. Desnom tipkom miša kliknite bežični adapter pod Mrežni adapteri^{(wireless adapter under Network Adapters)} i odaberite Ažuriraj upravljački program.^{(Update Driver.)}

3. Odaberite “ Pregledaj moje računalo za softver upravljačkog programa. ^{(Browse my computer for driver software.)}”

4. Ponovno kliknite na " Pusti me da odaberem s popisa dostupnih upravljačkih programa na mom računalu. ^{(Let me pick from a list of available drivers on my computer.)}”

5. Odaberite najnoviji dostupni upravljački program s popisa i kliknite Sljedeće^(Next) .

6. Ponovo pokrenite računalo da biste spremili promjene i provjerite možete li popraviti da DHCP nije omogućen za WiFi u sustavu Windows 10.^{( Fix DHCP is not enabled for WiFi in Windows 10.)}

Metoda 9: Pokrenite CCleaner i Malwarebytes^{(Method 9: Run CCleaner and Malwarebytes)}

1. Preuzmite i instalirajte  CCleaner  & Malwarebytes.

2.  Pokrenite Malwarebytes^{(Run Malwarebytes)(Run Malwarebytes)}  i neka skenira vaš sustav u potrazi za štetnim datotekama. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

3. Sada pokrenite CCleaner i odaberite  Custom Clean .

4. Pod Custom Clean odaberite  karticu Windows^{(Windows tab)} ,  a zatim provjerite jeste li označili zadane postavke i kliknite  Analiziraj^(Analyze) .

5.  Nakon što je analiza dovršena, provjerite jeste li sigurni da ćete ukloniti datoteke koje želite izbrisati.^{(Once Analyze is complete, make sure you’re certain to remove the files to be deleted.)}

6. Konačno, kliknite na  gumb Pokreni čistač^{(Run Cleaner)}  i pustite CCleaner da radi svojim tijekom.

7. Za dodatno čišćenje sustava  odaberite karticu Registry^{(select the Registry tab)} i provjerite je li označeno sljedeće:

8. Kliknite  gumb Skeniraj za probleme^{(Scan for Issues)}  i dopustite CCleaner -u da skenira, a zatim kliknite gumb  Popravi odabrane probleme^{(Fix Selected Issues)}  .

9. Kada CCleaner pita “ Želite li sigurnosne kopije promjena u registru? ^{(Do you want backup changes to the registry?)}”  odaberite Da^{( select Yes)} .

10. Nakon što je sigurnosno kopiranje dovršeno, kliknite gumb  Popravi sve odabrane probleme^{(Fix All Selected Issues)}  .

11. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Popravi grešku Steam-a Učitavanje steamui.dll nije uspjelo^{(Fix Steam Error Failed to load steamui.dll)}
• Promjena predloška pogona, mape ili biblioteke u sustavu Windows 10^{(Change Template of a Drive, Folder, or Library in Windows 10)}
• Popravak Greška Ne može se spojiti na Steam mrežu^{(Fix Could Not Connect to the Steam Network Error)}
• Popravite problem s pogrešnim vremenom sata u sustavu Windows 10^{(Fix Windows 10 Wrong Clock Time Issue)}

To je to što ste uspješno popravili DHCP nije omogućen za WiFi u sustavu Windows 10^{(Fix DHCP is not enabled for WiFi in Windows 10)} , ali ako i dalje imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

Fix DHCP is not enabled for WiFi in Windows 10

If you are not able to connect to the internet or facing limited internet connectivity problem, then chаnces are DHCP (Dynamic Host Configuration Protocol) Client might be disabled. To confirm this, run the netwоrk diagnostic and the troubleshooter will close with error message DHCP is not enabled for “WiFi” or DHCP is not enabled for “Wireless Network Connection”.

The Dynamic Host Configuration Protocol (DHCP) is a network protocol which is controlled by a DHCP server which dynamically distributes network configuration parameters, such as IP addresses, to all DHCP-enabled clients. DHCP server helps in reducing the need for a network administrator to configure these settings manually.

Now in Windows 10, DHCP is enabled by default, but if it is disabled by some 3rd party apps or possibly a virus then your Wireless access point will not run a DHCP server, which in turn will not automatically assign an IP address and you won’t be able to access the internet. So without wasting any time let’s see how to Fix DHCP is not enabled for WiFi in Windows 10 with the help of below-listed troubleshooting guide.

Fix DHCP is not enabled for WiFi in Windows 10

Make sure to create a restore point just in case something goes wrong.

After each of the methods, make sure to check if the DHCP is enabled or not, in order to do that follow this guide:

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

ipconfig /all

3. Scroll down to Wireless LAN adapter Wi-Fi and under DHCP Enabled it should read “yes“.

4. If you see “No” under DHCP Enabled, then the method didn’t work, and you need to try other solutions as well.

Method 1: Run Network Troubleshooter

1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

2. Right-click on your Wifi Connection and select Diagnose.

3. Let the Network Troubleshooter run, and it will give you the following error message: DHCP is not enabled for “Wireless Network Connection”.

4. Now click on Next in order to fix the issues. Also, click on “Try This Repairs as an Administrator“.

5. On the next prompt, click Apply this Fix.

6. Reboot your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 2: Enable DHCP via Network Adapter Settings

1. Press Windows Key + R then type ncpa.cpl and hit Enter.

2. Right-click on your Wifi Connection and select Properties.

3. From the Wi-Fi properties window, select Internet Protocol Version 4 and click Properties.

4. Now make sure to checkmark “Obtain an IP address automatically” and “Obtain DNS server address automatically”.

5. Click OK, then again click on OK and click Close.

6. Reboot your PC to save changes.

Method 3: Enable DHCP client service

1. Press Windows Key + R then type services.msc and hit Enter.

2. Find DHCP Client in this list then double-click on it to open its properties.

3. Make sure Startup type is set to Automatic and click Start if the service is not already running.

4. Click Apply, followed by OK.

5. Restart your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 4: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause an error and in order to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page which was earlier showing an error. If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 5: Uncheck Proxy

1. Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.

2. Next, Go to Connections tab and select LAN settings.

3. Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.

4. Click Ok then Apply and reboot your PC.

Method 6: Reset Winsock and TCP/IP

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

3. Reboot to apply changes. Netsh Winsock Reset command seems to Fix DHCP is not enabled for WiFi in Windows 10.

Method 7: Reinstall your Network driver

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your WiFi adapter and select Uninstall.

3. Again click Uninstall in order to confirm.

4. Now right-click on Network Adapters and select Scan for hardware changes.

5. Reboot your PC and Windows will automatically install the default drivers.

Method 8: Update Wireless Adapter drivers

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Right-click on the wireless adapter under Network Adapters and select Update Driver.

3. Select “Browse my computer for driver software.”

4. Again click on “Let me pick from a list of available drivers on my computer.”

5. Select the latest available driver from the list and click Next.

6. Reboot your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 9: Run CCleaner and Malwarebytes

1. Download and install CCleaner & Malwarebytes.

2. Run Malwarebytes and let it scan your system for harmful files. If malware is found it will automatically remove them.

3. Now run CCleaner and select Custom Clean.

4. Under Custom Clean, select the Windows tab then make sure to checkmark defaults and click Analyze.

5. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.

6. Finally, click on the Run Cleaner button and let CCleaner run its course.

7. To further clean your system, select the Registry tab, and ensure the following are checked:

8. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.

9. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

10. Once your backup has completed, click on the Fix All Selected Issues button.

11. Restart your PC to save changes.

Recommended:

• Fix Steam Error Failed to load steamui.dll
• Change Template of a Drive, Folder, or Library in Windows 10
• Fix Could Not Connect to the Steam Network Error
• Fix Windows 10 Wrong Clock Time Issue

That’s it you have successfully Fix DHCP is not enabled for WiFi in Windows 10 but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravite 5GHz WiFi koji se ne prikazuje u sustavu Windows 10

• Popravite da WiFi ne radi u sustavu Windows 10 [100% radi]

• Ikona Popravi WiFi je zasivljena u sustavu Windows 10

• Popravite ograničeni pristup ili WiFi bez povezivanja na Windows 10

• Fix WiFi se ne povezuje automatski u sustavu Windows 10

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Popravite nedostatak upravljačke ploče NVIDIA u sustavu Windows 10

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Popravite CD/DVD pogon koji nije otkriven nakon nadogradnje na Windows 10

• WiFi se stalno prekida u sustavu Windows 10 [RIJEŠENO]

• Popravite crni ekran League of Legends u sustavu Windows 10

• Popravite kako funkcijske tipke ne rade u sustavu Windows 10

• Popravite veliku upotrebu diska za telemetriju kompatibilnosti s Microsoftom u sustavu Windows 10

• Popravite Nemogućnost instalacije DirectX-a na Windows 10

• Popravite da se udaljena radna površina ne povezuje u sustavu Windows 10

• Popravite ispis Spooler koji se stalno zaustavlja u sustavu Windows 10

• Popravite upravljački program Wacom tableta koji nije pronađen u sustavu Windows 10

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Popravite ikone sustava koje se ne prikazuju na programskoj traci sustava Windows 10

• Riješite generički problem PnP monitora u sustavu Windows 10