Vraćanje sustava^{(System Restore)} vrlo je korisna značajka u sustavu Windows 10^{(Windows 10)} jer se koristi za vraćanje vašeg računala na ranije radno vrijeme u slučaju bilo kakvih grešaka u sustavu. Ali ponekad vraćanje sustava^{(System Restore)} ne uspije s porukom o pogrešci koja kaže " Vraćanje sustava^{(System Restore)} nije uspješno dovršeno" i niste mogli vratiti svoje računalo. Ali ne brinite jer je tu alat za rješavanje problema koji će vas uputiti kako popraviti ovu pogrešku i vratiti svoje računalo pomoću točke vraćanja sustava. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti problem vraćanja sustava^{(System Restore)} koji nije uspješno završio s dolje navedenim metodama.

Vraćanje sustava nije uspješno dovršeno. Sistemske datoteke i postavke vašeg računala ^{(System Restore did not complete successfully. Your computer’s system files and settings )}nisu promijenjene.^{(were not changed.)}

pojedinosti:^(Details:)

Vraćanje sustava nije uspjelo tijekom vraćanja direktorija s točke vraćanja. ^{(System Restore failed while restoring the directory from the restore point.)}
Izvor: AppxStaging^{(Source: AppxStaging)}

Destination: %ProgramFiles%\WindowsApps
Dogodila se neodređena pogreška tijekom vraćanja sustava. ^{(An unspecified error occurred during System Restore. )}

Sljedeći vodič će popraviti sljedeće pogreške:

Vraćanje sustava nije dovršeno Pogreška 0x8000ffff uspješno  ^{(System Restore did not complete Error 0x8000ffff successfully )}
Vraćanje sustava nije uspješno dovršeno s pogreškom 0x80070005 ^{(System Restore did not complete successfully with error 0x80070005)}
Nespecificirana pogreška dogodila se tijekom vraćanja sustava 0x80070091 ^{(An unspecified error occurred during System Restored 0x80070091)}
Popravi pogrešku 0x8007025d prilikom pokušaja vraćanja^{(Fix Error 0x8007025d while trying to restore)}

Popravak vraćanja sustava^{(Fix System Restore)} nije uspješno dovršen.

Metoda 1: Izvedite čisto pokretanje^{(Method 1: Perform a Clean Boot)}

Ponekad softver treće strane može biti u sukobu s vraćanjem sustava^{(System Restore)} i stoga ne biste trebali moći vratiti svoj sustav na ranije vrijeme pomoću točke vraćanja sustava. Da biste popravili uspješno vraćanje sustava u potpunosti^{(Fix System Restore did not completely error successfully)} , morate izvršiti čisto podizanje sustava^{(perform a clean boot)} na računalu i dijagnosticirati problem korak po korak.

Zatim pokušajte upotrijebiti vraćanje sustava i provjerite možete li riješiti ovu pogrešku.

Metoda 2: Pokrenite vraćanje sustava iz sigurnog načina rada^{(Method 2: Run System Restore from Safe Mode)}

1. Pritisnite tipku Windows + R zatim upišite msconfig i pritisnite Enter da otvorite Konfiguraciju sustava^{(System Configuration)} .

2. Prijeđite na karticu za pokretanje^{( boot tab)} i označite opciju Sigurno pokretanje.^{(Safe Boot option.)}

3. Kliknite Primijeni, a zatim OK.

4. Ponovno pokrenite računalo i sustav će se automatski pokrenuti u Safe Mode.^{( Safe Mode automatically.)}

5. Pritisnite tipku Windows + R i upišite sysdm.cpl  , a zatim pritisnite enter.

6. Odaberite karticu Zaštita sustava^{(System Protection)} i odaberite Vraćanje sustava.^{( System Restore.)}

7. Kliknite Dalje^(Next) i odaberite željenu točku vraćanja sustava^{(System Restore point)} .

8. Slijedite upute na zaslonu da biste dovršili vraćanje sustava.

9. Nakon ponovnog pokretanja, možda ćete moći popraviti oporavak sustava koji nije uspješno dovršen.^{(Fix System Restore did not complete successfully.)}

Metoda 3: Pokrenite provjeru sistemskih datoteka (SFC) i provjerite disk (CHKDSK) u sigurnom načinu rada^{(Method 3: Run System File Checker (SFC) and Check Disk (CHKDSK) in Safe Mode)}

Naredba  sfc /scannow ( System File Checker ) skenira integritet svih zaštićenih datoteka sustava Windows i zamjenjuje neispravno oštećene, promijenjene/modificirane ili oštećene verzije ispravnim verzijama ako je moguće.

1.  Otvorite naredbeni redak s administrativnim pravima^{(Open Command Prompt with Administrative rights)} .

2. Sada u cmd prozoru upišite sljedeću naredbu i pritisnite Enter :

sfc /scannow

3. Pričekajte^(Wait) da se završi provjera sistemskih datoteka.

4. Pričekajte da se gornji proces završi i upišite sljedeću naredbu u cmd i pritisnite Enter :

chkdsk C: /f /r /x

5. Poništite opciju Sigurno pokretanje^{(Safe Boot)} u Konfiguraciji sustava^{(System Configuration)} i zatim ponovno pokrenite računalo da biste spremili promjene.

Metoda 4: Pokrenite DISM ako SFC ne uspije^{(Method 4: Run DISM if SFC fails)}

1. Pritisnite tipku Windows Key + X i kliknite na Command Prompt (Admin).

2. Upišite sljedeće i pritisnite enter:

DISM /Online /Cleanup-Image /RestoreHealth

3. Pustite naredbu DISM da se pokrene i pričekajte da završi.

4. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows svojim izvorom popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

5. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 5: Onemogućite antivirusni program prije vraćanja^{(Method 5: Disable Antivirus Before Restoring)}

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena:^(Note:) Odaberite najmanju moguću količinu vremena, na primjer, 15 minuta ili 30 minuta.

3. Nakon što završite, ponovno pokušajte vratiti svoje računalo koristeći System Restore i provjerite je li pogreška riješena ili ne.

6. način: preimenujte mapu WindowsApps u sigurnom načinu rada^{(Method 6: Rename the WindowsApps folder in Safe Mode)}

1. Pritisnite tipku Windows + R zatim upišite msconfig i pritisnite Enter da otvorite Konfiguraciju sustava^{(System Configuration)} .

2. Prijeđite na karticu za pokretanje^{( boot tab)} i označite opciju Sigurno pokretanje.^{(Safe Boot option.)}

3. Kliknite Primijeni, a zatim OK.

4. Ponovno pokrenite računalo i sustav će se automatski pokrenuti u Safe Mode.^{( Safe Mode automatically.)}

5. Pritisnite tipku Windows Key + X , a zatim odaberite naredbeni redak (administrator).^{(Command Prompt (Admin).)}

3. Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

cd C:\Program Files
takeown /f WindowsApps /r /d Y
icacls WindowsApps /grant “%USERDOMAIN%\%USERNAME%”:(F) /t
attrib WindowsApps -h
preimenuj WindowsApps WindowsApps.old^{(rename WindowsApps WindowsApps.old)}

4. Opet^(Again) idite na Konfiguracija sustava^{(System Configuration)} i poništite Safe boot^{(uncheck Safe boot)} za normalno podizanje sustava.

5. Ako se opet suočite s pogreškom, upišite ovo u cmd i pritisnite Enter :

icacls WindowsApps /grant administrators:F /T

Ovo bi trebalo biti u mogućnosti popraviti vraćanje sustava koje nije uspješno dovršeno^{(Fix System Restore did not complete successfully)} , ali zatim pokušajte sljedeću metodu.

Metoda 7: Provjerite jesu li usluge vraćanja sustava pokrenute^{(Method 7: Make sure System Restore Services are running)}

1. Pritisnite Windows Keys + R zatim upišite services.msc i pritisnite enter.

2. Sada pronađite sljedeće usluge:

Vraćanje sustava ^{(System Restore)}
Volume Shadow Copy
Task Scheduler
Microsoft Software Shadow Copy Provider

3. Desnom tipkom miša kliknite svaki od njih i odaberite Svojstva.^{(Properties.)}

4. Provjerite^(Ensure) je li svaka od ovih usluga pokrenuta, ako ne, zatim kliknite na Pokreni^(Run) i postavite njihovu vrstu pokretanja na Automatski.^(Automatic.)

5. Kliknite Apply, a zatim OK.

6. Ponovo pokrenite računalo da biste spremili promjene i provjerite možete li popraviti problem s vraćanjem sustava koji nije uspješno dovršen^{(Fix System Restore did not complete successfully issue)} pokretanjem vraćanja sustava.

Metoda 8: Provjerite postavke zaštite sustava^{(Method 8: Check System Protection settings)}

1. Desnom tipkom miša kliknite Ovo računalo ili Moje računalo^{(This PC or My Computer)} i odaberite Svojstva.^{(Properties.)}

2. Sada kliknite na Zaštita sustava^{(System Protection)} na lijevom izborniku.

3. Provjerite ima li vaš tvrdi disk vrijednost stupca zaštite postavljenu na UKLJUČENO^{(hard disk has protection column value set to ON)} ako je isključeno, a zatim odaberite svoj pogon i kliknite Konfiguriraj^(Configure) .

4. Kliknite Primijeni^{(Click Apply)} , zatim OK i zatvorite sve.

5. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno;^{(Recommended;)}

• Popravite pogrešku 0x8007025d dok pokušavate vratiti^{(Fix Error 0x8007025d while trying to restore)}
• Popravi pogrešku 0x8007000e sprječavajući sigurnosne kopije^{(Fix Error 0x8007000e Preventing Backups)}
• Onemogućite Snap Pop-up dok se pomiču Windows^{(Disable Snap Pop-Up While Moving Windows)}
• Popravite pogrešku vraćanja sustava 0x80070091^{(Fix System Restore Error 0x80070091)}

Uspješno ste popravili Vraćanje sustava nije uspješno dovršilo problem^{(Fix System Restore did not complete problem successfully)} , ali ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix System Restore did not complete successfully

System Restore is a very useful feature in Windows 10 as it is used to restore your PC to an earlier working time in case of any mishaps to the system. But sometimes System Restore fails with an error message saying “System Restore did not complete successfully”, and you could not restore your PC. But don’t worry as a troubleshooter is here to guіde you on how to fix this error and rеstore your PC using a system restore point. So without wasting any time let’s see how to actually fix System Restore did not complete successfully issue with the below-listed methods.

System Restore did not complete successfully. Your computer’s system files and settings were not changed.

Details:

System Restore failed while restoring the directory from the restore point.
Source: AppxStaging

Destination: %ProgramFiles%\WindowsApps
An unspecified error occurred during System Restore. 

The below guide will fix the following errors:

System Restore did not complete Error 0x8000ffff successfully 
System Restore did not complete successfully with error 0x80070005
An unspecified error occurred during System Restored 0x80070091
Fix Error 0x8007025d while trying to restore

Fix System Restore did not complete successfully.

Method 1: Perform a Clean Boot

Sometimes 3rd party software can conflict with System Restore and therefore, you should not be able to restore your system to an earlier time using a system restore point. To Fix System Restore did not completely error successfully, you need to perform a clean boot in your PC and diagnose the issue step by step.

Then try to use system restore and see if you’re able to this error.

Method 2: Run System Restore from Safe Mode

1. Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

2. Switch to boot tab and checkmark Safe Boot option.

3. Click Apply, followed by OK.

4. Restart your PC and system will boot into Safe Mode automatically.

5. Press Windows Key + R and type sysdm.cpl then hit enter.

6. Select the System Protection tab and choose System Restore.

7. Click Next and choose the desired System Restore point.

8. Follow the on-screen instruction to complete system restore.

9. After reboot, you may be able to Fix System Restore did not complete successfully.

Method 3: Run System File Checker (SFC) and Check Disk (CHKDSK) in Safe Mode

The sfc /scannow command (System File Checker) scans the integrity of all protected Windows system files and replaces incorrectly corrupted, changed/modified, or damaged versions with the correct versions if possible.

1. Open Command Prompt with Administrative rights.

2. Now in the cmd window type the following command and hit Enter:

sfc /scannow

3. Wait for the system file checker to finish.

4.Wait for the above process to finish and the type the following command in cmd and hit Enter:

chkdsk C: /f /r /x

5. Uncheck the Safe Boot option in System Configuration and then restart your PC to save changes.

Method 4: Run DISM if SFC fails

1. Press Windows Key + X and click on Command Prompt(Admin).

2. Type the following and press enter:

DISM /Online /Cleanup-Image /RestoreHealth

3. Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work, then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

5. Reboot your PC to save changes.

Method 5: Disable Antivirus Before Restoring

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once is done, again try to restore your PC using System Restore and check if the error resolves or not.

Method 6: Rename the WindowsApps folder in Safe Mode

1. Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

2. Switch to boot tab and checkmark Safe Boot option.

3. Click Apply, followed by OK.

4. Restart your PC and system will boot into Safe Mode automatically.

5. Press Windows Key + X then select Command Prompt (Admin).

3. Type the following command in cmd and hit Enter after each one:

cd C:\Program Files
takeown /f WindowsApps /r /d Y
icacls WindowsApps /grant “%USERDOMAIN%\%USERNAME%”:(F) /t
attrib WindowsApps -h
rename WindowsApps WindowsApps.old

4. Again go to System Configuration and uncheck Safe boot to boot normally.

5. If you again face the error, then type this in cmd and hit Enter:

icacls WindowsApps /grant administrators:F /T

This should be able to Fix System Restore did not complete successfully but then try the next method.

Method 7: Make sure System Restore Services are running

1. Press Windows Keys + R then type services.msc and hit enter.

2. Now find the following services:

System Restore
Volume Shadow Copy
Task Scheduler
Microsoft Software Shadow Copy Provider

3. Right-click on each of them and select Properties.

4. Ensure each of these services is running if not then click on Run and set their Startup type to Automatic.

5. Click Apply, followed by OK.

6. Reboot your PC to save changes and see if you can Fix System Restore did not complete successfully issue by running System Restore.

Method 8: Check System Protection settings

1. Right-click on This PC or My Computer and select Properties.

2. Now click on System Protection in the left-hand menu.

3. Make sure your hard disk has protection column value set to ON if it’s Off then select your drive and click Configure.

4. Click Apply, followed by OK and close everything.

5. Reboot your PC to save changes.

Recommended;

• Fix Error 0x8007025d while trying to restore
• Fix Error 0x8007000e Preventing Backups
• Disable Snap Pop-Up While Moving Windows
• Fix System Restore Error 0x80070091

You have successfully Fix System Restore did not complete problem successfully, but if you still have any questions regarding this guide, please feel free to ask them in the comment’s section.

Related posts

• Popravite pogrešku vraćanja sustava 0x80070091

• Fix Service Host: Lokalni sustav (svchost.exe) Visoka upotreba CPU-a i diska

• Popravite nedostatne resurse sustava da biste dovršili pogrešku API-ja

• Popravite da uređaj priključen na sustav ne radi

• Popravite pogreške datotečnog sustava pomoću uslužnog programa za provjeru diska (CHKDSK)

• Kako popraviti pogreške datotečnog sustava u sustavu Windows 10

• Popravi Ova kopija sustava Windows nije originalna Pogreška

• Popravak Nemogućnost otvaranja lokalnog diska (C:)

• Popravite pogrešku vraćanja sustava 0x8007025d na Windows 10

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Popravite pogrešku vraćanja sustava 0x8007045b u sustavu Windows 11/10

• Popravite Windows 7 ažuriranja koja se ne preuzimaju

• Popravak radne površine odnosi se na lokaciju koja nije dostupna

• Pogreška 0x80070013 za vraćanje sustava, sigurnosno kopiranje ili popravak ažuriranja sustava Windows

• Popravite pogrešku vraćanja sustava 0x8007007e u sustavu Windows 11/10

• Popravite ikone sustava koje nedostaju na programskoj traci sustava Windows

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti računalo ne objavljuje