Ako pokušavate zaustaviti uslugu Windows Update pomoću naredbenog retka^{(Command Prompt)} , ali dobijete poruku Usluga Windows Update nije se mogla zaustaviti^{(The Windows Update service could not be stopped)} , evo što možete učiniti da zaustavite uslugu^(Service) . Ova se poruka pojavljuje samo kada koristite naredbeni redak^{(Command Prompt)} za zaustavljanje usluge Windows Update – i ako CMD nema administratorske privilegije. Mnogi ljudi pokušavaju onemogućiti automatsko ažuriranje sustava Windows 10^{(disable automatic Windows 10 Update)} , ali iz nekog razloga ne možete zaustaviti uslugu, onda će vam ovaj članak pomoći.

Uobičajena naredba za zaustavljanje usluge Windows Update pomoću CMD - a je:

net stop wuauserv

Ali to ponekad može vratiti poruku o pogrešci. Ako ga ne možete zaustaviti čak ni putem Windows Services Managera^{(Windows Services Manager)} , čitajte dalje.

Usluga Windows Update nije se mogla zaustaviti

Ako usluga Windows Update^{(Windows Update Service)} ne prestane, ovaj će vam post pokazati kako zaustaviti ovu uslugu WUAUSERV u ^(WUAUSERV)Windows 11/10 :

1. Zaustavite^{(Stop Windows Update)} uslugu Windows Update pomoću PID -a^(PID)
2. Provjerite ovisnosti usluge.

1] Zaustavite^{(Stop Windows Update)} uslugu Windows Update pomoću PID -a^(PID)

Svaki pokrenuti proces ili usluga ima jedinstveni ID ili PID . Možete ga pronaći u Upravitelju zadataka^{(Task Manager)} i zatim ga upotrijebiti za zaustavljanje usluge.

Otvorite Upravitelj zadataka^{(Task Manager)} i idite na karticu Usluge^{(Services )} . Ovdje biste trebali pronaći uslugu pod nazivom wuauserv . Morate dobiti PID te pokrenute usluge.

Nakon toga otvorite naredbeni redak s administratorskim ovlastima^{(open Command Prompt with administrator privilege)} i unesite ovu naredbu-

taskkill /f /pid <PID>

Ne zaboravite zamijeniti <PID> originalnim PID -om koji ste ranije kopirali iz upravitelja zadataka –^{(Task Manager –)} što je u našem slučaju 6676 .

Trebala bi vas dočekati ovakva poruka-

SUCCESS: The process with PID 6676 has been terminated.

To znači da ste uspješno zaustavili uslugu Windows Update .

2] Provjerite ovisnosti usluge

Većina Windows usluga^(Services) ovisi o drugim uslugama. Ponekad te usluge mogu uzrokovati problem zbog nekog unutarnjeg sukoba. U takvim trenucima trebali biste provjeriti ovisnosti. U tom slučaju morate pronaći Ovisnosti ove usluge Windows. ^{(find Dependencies of this Windows Service.)}Ako bilo koja pokrenuta usluga koristi uslugu WU, možda ćete morati prvo zaustaviti tu uslugu.

Kako mogu prisiliti da se Windows Update Service zaustavi?

Možete koristiti naredbeni redak^{(Command Prompt)} da biste prisilili uslugu Windows Update da se zaustavi u Windows 11/10 . Za to vam je potrebna pomoć Task Managera^{(Task Manager)} kako biste pronašli PID koji je dodijeljen svakom zadatku koji se izvršava. Nakon toga možete otvoriti povišeni naredbeni redak^{(Command Prompt)} i unijeti naredbu taskkill /f /pid <PID> kako biste zaustavili izvođenje usluge na vašem računalu.

Zašto ne mogu zaustaviti uslugu Windows Update ?

Morate imati administrativne privilegije da zaustavite uslugu Windows Update . Ako vaš račun ne pripada grupi administratora^{(Administrator)} , možda nećete moći zaustaviti ovu uslugu na svom računalu. Stoga^(Therefore) se prijavite na svoj administratorski^{(Administrator)} račun i zaustavite uslugu Windows Update pomoću usluga ili naredbenog retka^{(Command Prompt)} . S druge strane, preporuča se provjeriti i ovisnosti usluge.

Hope this helps!

Fix The Windows Update service could not be stopped

Іf you are trying to stop Windows Update service using Commаnd Prompt, but you receive a message The Windows Update service could not be stopped, here is what you can do to stop the Service. This message appears only when you use the Command Prompt to stop the Windows Update service – and if CMD doesn’t have the admin privilege.  Many people are trying to disable automatic Windows 10 Update, but you cannot stop the service for some reason, then this article will help you.

The usual command to stop the Windows Update service using CMD is:

net stop wuauserv

But this may at times return the error message. If you cannot stop it even via the Windows Services Manager, then read on.

The Windows Update service could not be stopped

If Windows Update Service won’t stop then this post will show you how to stop this WUAUSERV service on Windows 11/10:

1. Stop Windows Update service using PID
2. Check Service dependencies.

1] Stop Windows Update service using PID

Every running process or service has a unique ID or PID. You can find it in the Task Manager and then use it to stop the service.

Open the Task Manager and go to the Services tab. Here you should find a service named wuauserv. You need to get the PID of that running service.

After that, open Command Prompt with administrator privilege and enter this command-

taskkill /f /pid <PID>

Do not forget to replace <PID> with original PID that you copied earlier from the Task Manager – which in our case is 6676.

You should be greeted with a message like this-

SUCCESS: The process with PID 6676 has been terminated.

This means you have successfully stopped the Windows Update service.

2] Check Service dependencies

Most of the Windows Services depend on other services. Sometimes those services can cause an issue due to some internal conflict. At such times, you should check the dependencies. In this case, you need to find Dependencies of this Windows Service. If any running service is using the WU service, then you may be required to stop that service first.

How do I force Windows Update Service to stop?

You can use Command Prompt to force the Windows Update service to stop in Windows 11/10. For that, you need to take the help of the Task Manager to find the PID, which is assigned with every running task. After that, you can open elevated Command Prompt and enter taskkill /f /pid <PID> command to stop the service from running on your PC.

Why can I not stop Windows Update service?

You must have administrative privilege to stop the Windows Update service. If your account doesn’t belong to the Administrator group, you might not be able to stop this service on your computer. Therefore, log in to your Administrator account and stop the Windows Update service using Services or Command Prompt. On the other hand, it is recommended to check the service dependencies as well.

Hope this helps!

Related posts

• Što je Windows Update Medic Service (WaaSMedicSVC.exe)?

• Popravite šifru pogreške usluge Windows Server Update Services 0x80072EE6

• Gumb za rješavanje problema na stranici Windows Update

• Najbolji primjeri iz prakse za poboljšanje vremena instalacije Windows Update

• Gdje pronaći i kako pročitati dnevnik Windows Update u sustavu Windows 11/10

• Kako popraviti šifru pogreške Windows Update 0x80070012

• Kako pauzirati Windows Update u sustavu Windows 11/10 do 365 dana

• Pogreška Windows Update 0x800F081F u sustavu Windows 11/10

• Ispravite pogrešku Windows Update 0x80240439 u sustavu Windows 10

• Popravi pogrešku 0x8007042c za Windows Update ili vatrozid

• Nove značajke u verziji Windows 10 20H2 ažuriranje listopada 2020

• Popraviti pogrešku Windows Update C8000266?

• Kako popraviti pogrešku Windows Update 0xca020007

• Windows Update i sigurnosne postavke u sustavu Windows 10

• Ispravite pogrešku Windows Update 0x8e5e03fa u sustavu Windows 10

• Windows Update se ne preuzima niti se instalira, pogreška 0x80070543

• Popravite pogrešku Windows Update 0x800f0989 u sustavu Windows 11/10

• Popravite pogrešku Windows Update 80072EFE

• Instalacija Windows Update s kodom pogreške 0x8024200D nije uspjela

• Win Update Stop: Onemogućite ažuriranja sustava Windows u sustavu Windows 10