Ako se susrećete s problemima s USB uređajem ili dobivate poruku o pogrešci poput ove " USB uređaj^(Device) nije prepoznat", morate riješiti ovaj problem kako biste riješili temeljni uzrok. Prvi korak bi bio da otvorite Upravitelj uređaja^{(Device Manager)} , proširite kontrolere univerzalne serijske sabirnice^{(Universal Serial Bus)} , zatim desnom tipkom miša kliknite svoj uređaj za koji se susrećete s gornjom greškom (ili će uređaj imati žuti uskličnik) i odaberite Svojstva.

U prozoru svojstava pod Status uređaja^(Device) vidjet ćete poruku o pogrešci " Windows je zaustavio ovaj uređaj jer je prijavio probleme ( Code 43 )". Ovo je temeljni uzrok koji morate popraviti kako bi USB uređaj ponovno radio. Šifra pogreške 43 znači da je upravitelj uređaja zaustavio USB uređaj na kojem je uređaj prijavio neki problem u sustav Windows .

Glavni uzrok ove poruke o pogrešci su problemi s upravljačkim programom jer je jedan od USB upravljačkih programa koji kontroliraju USB uređaj obavijestio Windows da je uređaj na neki način otkazao i stoga ga Windows mora zaustaviti. Dakle, bez gubljenja vremena, pogledajmo Kako popraviti Windows^{(Fix Windows)} je zaustavio ovaj uređaj jer je prijavio probleme ( Code 43 ) uz pomoć dolje navedenog vodiča za rješavanje problema.

Popravak sustava Windows^{(Fix Windows)} zaustavio je ovaj uređaj jer je prijavio probleme ( Kôd 43^{(Code 43)} )

Napomena:^(Note:) Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Prije nego što nastavite, trebali biste isprobati neke jednostavne popravke poput ponovnog pokretanja^(Restart) računala, isključiti i priključiti uređaj, upotrijebiti drugi USB priključak, isključiti sve ostale USB uređaje, ponovno pokrenuti računalo i isprobati uređaj koji je uzrokovao problem. Još jedna stvar, provjerite radi li vaš USB uređaj na drugom računalu, ako ne radi to znači da je USB uređaj oštećen i ne možete ništa učiniti osim zamijeniti uređaj novim.

Metoda 1: deinstalirajte USB upravljačke programe^{(Method 1: Uninstall USB Drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc  i kliknite U redu^(OK) da biste otvorili Upravitelj uređaja.

2. U upravitelju uređaja proširite kontrolere univerzalne serijske sabirnice.^{(Universal Serial Bus controllers.)}

3. Uključite svoj USB uređaj koji vam prikazuje poruku o pogrešci " Windows je zaustavio ovaj uređaj jer je prijavio probleme (Kôd 43)^{(Windows has stopped this device because it has reported problems (Code 43))} ".

4. Vidjet ćete nepoznati USB uređaj^{(Unknown USB device)} sa žutim uskličnikom ispod kontrolera univerzalne serijske sabirnice .^{(Universal Serial Bus)}

5. Sada kliknite desnom tipkom miša na nju i kliknite Deinstaliraj.^(Uninstall.)

6. Ponovno pokrenite svoje računalo i Windows^(Windows) će automatski instalirati zadane upravljačke programe .

7. Ponovno ako se problem nastavi ponoviti gore navedene korake za svaki uređaj pod kontrolerima univerzalne serijske sabirnice.^{(Universal Serial Bus controllers.)}

Metoda 2: Ažurirajte USB upravljačke programe^{(Method 2: Update USB Drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc  i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2. Kliknite na Action > Scan for hardware changes.

3. Desnom tipkom miša kliknite Problematičan USB (treba biti označen žutim uzvikom)^{(Problematic USB (should be marked with Yellow exclamation) )} , a zatim desnom tipkom miša i kliknite " Ažuriraj upravljački program^{(Update Driver)} ".

4. Neka automatski traži upravljačke programe s interneta.

5. Ponovno pokrenite računalo i provjerite je li problem riješen ili ne.

6. Ako još uvijek imate USB uređaj koji ^(USB)Windows ne prepoznaje , učinite gornji korak za sve stavke prisutne u Universal Bus Controllerima.^{( Universal Bus Controllers.)}

7. U Upravitelju uređaja^{(Device Manager)} , desnom tipkom miša kliknite USB Root Hub , a zatim kliknite Svojstva^(Properties) i prijeđite na karticu Upravljanje napajanjem,^{(Power Management)} a zatim poništite opciju^(uncheck) " Dopusti računalu da isključi ovaj uređaj radi uštede energije^{(Allow the computer to turn off this device to save power)} ".

Metoda 3: Onemogućite postavke USB selektivne suspenzije^{(Method 3: Disable USB Selective Suspend Settings)}

1. Pritisnite tipku Windows + R, zatim upišite powercfg.cpl  i pritisnite enter da otvorite Mogućnosti napajanja^{(Power Options)} .

2. Zatim kliknite na Promjena postavki plana^{(Change plan settings)} na vašem trenutno odabranom planu napajanja.

3. Sada kliknite Promjena naprednih postavki napajanja.^{( Change advanced power settings.)}

4. Dođite do USB postavki i proširite ih, a zatim proširite postavke USB selektivne obustave.^{(expand USB selective suspend settings.)}

5. Onemogućite ^(Disable ) postavke Na bateriji i Uključeno^{( On battery and Plugged in)} .

6. Kliknite Primijeni, zatim OK , a zatim ponovno pokrenite računalo.

Metoda 4: Onemogućite brzo pokretanje^{(Method 4: Disable Fast Startup)}

1. Pritisnite tipku Windows + R, zatim upišite powercfg.cpl  i pritisnite enter da otvorite Mogućnosti napajanja^{(Power Options)} .

2. Kliknite na Odaberi što tipke za napajanje rade^{(Choose what the power buttons do)}  na lijevom izborniku.

3. Zatim kliknite na Promijeni postavke koje trenutno nisu dostupne.^{( Change settings that are currently unavailable.)}

4. Poništite opciju "Uključi brzo pokretanje"^{(Uncheck “Turn on fast startup”)} u odjeljku Postavke isključivanja.

5. Sada kliknite Spremi promjene^{(Save changes)} i ponovno pokrenite računalo.

Metoda 5: Pokrenite Microsoft Windows USB alat za rješavanje problema^{(Method 5: Run Microsoft Windows USB Troubleshooter)}

Microsoft je objavio rješenje Fix It za rješavanje problema povezanih s USB - om u sustavu Windows 10^{(Windows 10)} . Windows USB alat za rješavanje problema^{(Windows USB Troubleshooter)} rješava sljedeće probleme:

• Vaš USB filtar klase nije prepoznat.
• Vaš USB uređaj nije prepoznat.
• USB uređaj za pisač ne ispisuje.
• USB uređaj za pohranu ne može se izbaciti.
• Windows Update je konfiguriran da nikada ne ažurira upravljačke programe.

1. Otvorite svoj web preglednik i idite na ovaj URL^{(navigate to this URL)} .

2. Kada se stranica završi s učitavanjem, pomaknite se prema dolje i kliknite Preuzmi.^(Download.)

3. Nakon što se datoteka preuzme, dvaput kliknite na datoteku da biste otvorili Windows USB alat za rješavanje problema.^{(Windows USB troubleshooter.)}

4. Kliknite  Sljedeće^( Next) i pustite da se pokrene Windows USB Troubleshooter .

5. Ako imate priključene uređaje, USB Troubleshooter će zatražiti potvrdu za njihovo izbacivanje.

6. Provjerite USB uređaj spojen na vaše računalo i kliknite Dalje.^{( Next.)}

7. Ako je problem pronađen, kliknite na Primijeni ovaj popravak.^{(Apply this fix.)}

8. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Popravite HP Touchpad koji ne radi u sustavu Windows 10^{(Fix HP Touchpad Not Working in Windows 10)}
• Kako izdvojiti slike iz Word dokumenta 2019 [VODIČ]
• Preuzmite službeni Windows 10 ISO bez alata za kreiranje medija^{(Download official Windows 10 ISO without Media Creation Tool)}
• Ethernet ne radi u sustavu Windows 10 [RIJEŠENO]^{(Ethernet Not Working in Windows 10 [SOLVED])}

To je to što ste uspješno popravili Windows je zaustavio ovaj uređaj jer je prijavio probleme (Kôd 43)^{(Fix Windows has stopped this device because it has reported problems (Code 43))} , ali ako još uvijek imate pitanja u vezi s ovim postom, slobodno ih pitajte u odjeljku za komentare.

Fix Windows has stopped this device because it has reported problems (Code 43)

If you’re facing issues with your USB device or getting an error message like this “USB Device not Reсognizеd”, you nеed to troubleshoot this issue to fix the underlying cause. The first step would be to open Device Manager, expand Universal Serial Bus controllers, then right-click on your device for which you’re facing the above error (or the device will haνe a yellow exсlamation mark) and selеct Propertiеs.

In the properties window under Device status, you will see the error message “Windows has stopped this device because it has reported problems (Code 43)”. This is the underlying cause which you need to fix for the USB device to work again. The error code 43 means that the device manager has stopped the USB device the device has reported some problem to the Windows.

The main cause for this error message is driver issues because one of the USB drivers controlling the USB device has notified Windows that the device failed in some manner and therefore, Windows needs to stop it. So without wasting any time let’s see How to Fix Windows has stopped this device because it has reported problems (Code 43) with the help of the below-listed troubleshooting guide.

Fix Windows has stopped this device because it has reported problems (Code 43)

Note: Make sure to create a restore point just in case something goes wrong.

Before continuing, you should try some simple fixes such as Restart your PC, unplug & plug-in the device, use another USB port, unplug all the other USB devices, restart your PC and try the device which was causing the issue. One more thing, check if your USB device work in another computer, if it doesn’t then this means that the USB device is damaged and there is nothing you could do, except replacing the device with a new one.

Method 1: Uninstall USB Drivers

1. Press Windows Key + R then type devmgmt.msc and click OK to open Device Manager.

2. In device Manager, expand Universal Serial Bus controllers.

3.Plug in your USB device, which shows you the error message “Windows has stopped this device because it has reported problems (Code 43)“.

4. You will see an Unknown USB device with a yellow exclamation mark under Universal Serial Bus controllers.

5. Now right-click on it and click Uninstall.

6. Restart your PC, and the default drivers will be automatically installed by Windows.

7. Again if the issue persists repeat the above steps for each device under Universal Serial Bus controllers.

Method 2: Update USB Drivers

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Click on Action > Scan for hardware changes.

3. Right-click on the Problematic USB (should be marked with Yellow exclamation) then right-click and click “Update Driver“.

4. Let it searches for drivers automatically from the internet.

5. Restart your PC and see if the issue is resolved or not.

6. If you are still facing USB device not recognized by Windows, then do the above step for all the items present in Universal Bus Controllers.

7. From the Device Manager, right-click on the USB Root Hub then click Properties and switch to the Power Management tab then uncheck “Allow the computer to turn off this device to save power.”

Method 3: Disable USB Selective Suspend Settings

1. Press Windows Key + R then type powercfg.cpl and hit enter to open Power Options.

2. Next, click on Change plan settings on your currently selected power plan.

3. Now click Change advanced power settings.

4. Navigate to USB settings and expand it, then expand USB selective suspend settings.

5. Disable both On battery and Plugged in settings.

6. Click Apply, followed by OK then Restart your PC.

Method 4: Disable Fast Startup

1. Press Windows Key + R then type powercfg.cpl and hit enter to open Power Options.

2. Click on Choose what the power buttons do from the left-hand menu.

3. Next, click on Change settings that are currently unavailable.

4. Uncheck “Turn on fast startup” under Shutdown settings.

5. Now click Save changes and Restart your PC.

Method 5: Run Microsoft Windows USB Troubleshooter

Microsoft has released a Fix It solution to troubleshoot USB related issues on Windows 10. The Windows USB Troubleshooter fixes the following issues:

• Your USB class filter was not recognized.
• Your USB device is not recognized.
• The USB printer device is not printing.
• The USB storage device cannot be ejected.
• Windows Update is configured never to update drivers.

1. Open your web browser and navigate to this URL.

2. When the page has finished loading, scroll down and click Download.

3. Once the file is downloaded, double-click the file to open the Windows USB troubleshooter.

4. Click Next and let Windows USB Troubleshooter run.

5. If you have any attached devices, then USB Troubleshooter will ask for confirmation to eject them.

6. Check the USB device connected to your PC and click Next.

7. If the problem is found, click on Apply this fix.

8. Restart your PC to save changes.

Recommended:

• Fix HP Touchpad Not Working in Windows 10
• How to Extract Images from Word Document 2019 [GUIDE]
• Download official Windows 10 ISO without Media Creation Tool
• Ethernet Not Working in Windows 10 [SOLVED]

That’s it you have successfully Fix Windows has stopped this device because it has reported problems (Code 43) but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

Related posts

• 8 načina za popravak koda pogreške 43 u sustavu Windows 10

• Kako popraviti pogreške "Windows je zaustavio ovaj uređaj" kod 43 u sustavu Windows

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Popravi Windows nije mogao dovršiti formatiranje

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti računalo ne objavljuje

• Popravite šifru pogreške 0x8007000D kada pokušavate aktivirati Windows

• Popravite kôd pogreške CD ili DVD pogona 39

• Kako popraviti Netflixov kod pogreške M7111-1101

• Popravite šifru pogreške 0x8007007f u sustavu Windows 11

• Popravak nedostaju unosi registra Windows socketa potrebni za mrežno povezivanje

• 6 načina za popravak koda pogreške Netflixa M7121-1331-P7

• Popravite sustav Windows koji je otkrio sukob IP adrese

• Popravite pogrešku Windows ne može pronaći Steam.exe

• Popravak Windows nije mogao dovršiti tražene promjene

• Popravite kôd pogreške DVD/CD Rom 19 u sustavu Windows 10

• Popravite Windows koji se nije mogao povezati s uslugom klijenta grupnih pravila

• Popravi USB ne radi kod pogreške 39

• Popravi šifru pogreške 16: Ovaj zahtjev je blokiran sigurnosnim pravilima

• Ispraviti pogrešku Fallout 3 Ordinal 43 Not Found