Popravak radne površine odnosi se na lokaciju koja je nedostupna: ^{(Fix Desktop Refers to A Location That Is Unavailable: )} Ako primate sljedeću poruku o pogrešci kada pokrenete računalo "C:\Windows\system32\config\systemprofile\desktop se odnosi na lokaciju koja nije dostupna", to znači da je to netočno mjesto na radnoj površini. Kada se prijavite na svoj račun, otkrit ćete da sve vaše ikone i aplikacije na radnoj površini nisu prisutne, umjesto toga, imat ćete potpuno praznu radnu površinu i pojavljuje se sljedeća pogreška:

“ C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.“

Sada nema posebnog uzroka za ovu poruku o pogrešci, ali možete se suočiti s ovim problemom kada se vaš sustav naglo sruši, oštećujući sistemske datoteke, oštećujući korisnički profil ili oštećujući ažuriranje sustava Windows^(Windows) itd. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti Radna površina se odnosi^{(Fix Desktop Refers)} na lokaciju koja nije dostupna uz pomoć dolje navedenog vodiča za rješavanje problema.

Popravak radne površine odnosi^{(Fix Desktop Refers)} se na lokaciju koja nije dostupna

Obavezno  stvorite točku vraćanja^{(create a restore point)} u slučaju da nešto krene po zlu.

1. način: vratite radnu površinu na zadanu lokaciju^{(Method 1: Reset Desktop to Default Location)}

1. Pritisnite Windows Key + R zatim upišite sljedeće i pritisnite Enter:

C:\users\%username%

2. Desnom tipkom miša kliknite mapu Desktop i odaberite Svojstva.^{(Properties.)}

3. U svojstvima radne površine prijeđite na karticu Lokacija^{(Location tab)} i kliknite na gumb Vrati zadano.^{(Restore Default button.)}

4. Kliknite na Primijeni, a zatim na OK.

5. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li popraviti grešku koja se odnosi na lokaciju koja nije dostupna.^{(Fix Desktop Refers to A Location That Is Unavailable Error.)}

Metoda 2: popravak registra^{(Method 2: Registry Fix)}

Ako gornja metoda ne uspije, pokušajte umjesto toga ovu:

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

3. Obavezno odaberite User Shell Folders , a zatim u desnom oknu prozora dvaput kliknite na radnu površinu.^(Desktop.)

4. Sada u polju podataka o vrijednosti provjerite je li vrijednost postavljena na:

%USERPROFILE%\Desktop 

ILI^(OR)

C:\Users\%USERNAME%\Desktop

5. Kliknite OK i zatvorite Registry Editor .

6. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 3: kopirajte mapu radne površine natrag na njezino mjesto^{(Method 3: Copy Desktop Folder Back to Its Location)}

1. Pritisnite Windows Key + R zatim upišite sljedeće i pritisnite Enter:

C:\users\%username%

2. Provjerite možete li pronaći dvije mape radne površine^(Desktop) , jednu praznu, a drugu sa sadržajem radne površine.

3. Ako to učinite, izbrišite mapu radne površine koja je prazna.^{(delete the desktop folder which is empty.)}

4. Sada kopirajte mapu radne površine koja sadrži vaše podatke i idite na sljedeću lokaciju:

C:\Windows\system32\config\systemprofile\

5.Kada dođete do mape systemprofile, to će za vaše dopuštenje, jednostavno kliknite Nastavi^(Continue) za pristup mapi.

6. Zalijepite mapu Desktop^{(Paste the Desktop folder)} u mapu systemprofile.^{(systemprofile folder.)}

7. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li popraviti pogrešku koja se odnosi na lokaciju koja nije dostupna.^{( Fix Desktop Refers to A Location That Is Unavailable Error.)}

Metoda 4: Izvršite vraćanje sustava^{(Method 4: Perform System Restore)}

1. Pritisnite tipku Windows + R i upišite - sysdm.cpl - zatim pritisnite enter.

2. Odaberite karticu Zaštita sustava^{(System Protection)} i odaberite Vraćanje sustava.^{( System Restore.)}

3. Kliknite Dalje i odaberite željenu točku vraćanja sustava^{(System Restore point)} .

4. Slijedite upute na zaslonu da biste dovršili vraćanje sustava.

5. Nakon ponovnog pokretanja, možda ćete moći popraviti pogrešku koja se odnosi na mjesto koje nije dostupno.^{(Fix Desktop Refers to A Location That Is Unavailable Error.)}

Metoda 5: Napravite novi korisnički račun^{(Method 5: Create a New User Account)}

1. Pritisnite tipku Windows + I za otvaranje postavki^(Settings) , a zatim kliknite Računi.^(Accounts.)

2.Kliknite karticu Obitelj i druge osobe^{(Family & other people tab)} na lijevom izborniku i kliknite Dodaj nekog drugog na ovo računalo^{(Add someone else to this PC)} pod Ostale osobe.

3. Kliknite Nemam podatke za prijavu ove osobe^{( I don’t have this person’s sign-in information)} na dnu.

4. Odaberite Dodaj korisnika bez Microsoft računa^{(Add a user without a Microsoft account)} na dnu.

5. Sada upišite korisničko ime i lozinku za novi račun i kliknite Dalje^(Next) .

Zatim se prijavite na novi korisnički račun:^{(Log in to the new user account then:)}

1.Otvorite File Explorer , a zatim kliknite na View > Options.

2. Prijeđite na karticu Prikaz^{(View tab)} i označite Prikaži skrivene datoteke, mape i pogone.^{(Show hidden files, folders, and drives.)}

3. Poništite opciju Sakrij zaštićene datoteke operativnog sustava (preporučeno).^{(Uncheck Hide protected operating system files (Recommended).)}

4. Kliknite na Primijeni, a zatim na OK.

5. Idite do sljedećeg mjesta:

C:\Users\Old_Username

Napomena: Ovdje je C pogon na kojem je instaliran Windows , a ^(Windows)Old_Username je naziv vašeg starog korisničkog imena računa.

6. Odaberite sve datoteke iz gornje mape osim sljedećih:

Ntuser.dat
Ntuser.dat.log
Ntuser.ini

7. Sada pritisnite tipku Windows Key + R zatim upišite sljedeće i pritisnite Enter:

C:\users\%username%

Napomena:^(Note:) Ovo će biti vaša nova mapa korisničkog računa.

8. Zalijepite kopirani sadržaj ovdje i ponovno pokrenite računalo.

Preporučeno:^{(Recommended:)}

• Popravak Nije moguće postaviti zadanu pogrešku pisača 0x00000709^{(Fix Unable to Set Default Printer Error 0x00000709)}
• Popravite da mikrofon ne radi u sustavu Windows 10^{(Fix Microphone Not Working on Windows 10)}
• Uklonite Candy Crush Soda Saga iz sustava Windows 10^{(Remove Candy Crush Soda Saga from Windows 10)}
• Fix WiFi se ne povezuje automatski u sustavu Windows 10^{(Fix WiFi doesn’t connect automatically in Windows 10)}

To je to što ste uspješno popravili pogrešku koja se odnosi na lokaciju koja je nedostupna^{(Fix Desktop Refers to A Location That Is Unavailable Error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix Desktop Refers to A Location That Is Unavailable

Fix Desktop Refers to A Location That Is Unavailable: If you are receiving the following error message when you start your PC “C:\Windows\system32\config\systemprofile\desktop refers to a location that is unavailable” then this indicates incorrect desktop location. When you log in to your account, you will discover that all of your desktop icons and apps are not present, instead, you will have a completely blank desktop and the following error pops up:

“C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.“

Now there is no particular cause for this error message but you can face this issue when your system crashes abruptly damaging system files, corrupting user profile, or a corrupting Windows update etc. So without wasting any time let’s see how to actually Fix Desktop Refers to A Location That Is Unavailable with the help of the below-listed troubleshooting guide.

Fix Desktop Refers to A Location That Is Unavailable

Make sure to create a restore point just in case something goes wrong.

Method 1: Reset Desktop to Default Location

1.Press Windows Key + R then type the following and hit Enter:

C:\users\%username%

2.Right-click on the Desktop folder and select Properties.

3.In Desktop Properties switch to Location tab and click on Restore Default button.

4.Click Apply followed by OK.

5.Reboot your PC to save changes and see if you’re able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 2: Registry Fix

If the above method doesn’t work out then try this one instead:

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

3.Make sure to select User Shell Folders then in the right window pane double-click on the Desktop.

4.Now in the value data field make sure the value is set to:

%USERPROFILE%\Desktop 

OR

C:\Users\%USERNAME%\Desktop

5.Click OK and close Registry Editor.

6.Reboot your PC to save changes.

Method 3: Copy Desktop Folder Back to Its Location

1.Press Windows Key + R then type the following and hit Enter:

C:\users\%username%

2.See if you can find two Desktop folders, one empty and other with your desktop contents.

3.If you do, then delete the desktop folder which is empty.

4.Now copy the desktop folder which contains your data and navigate to the following location:

C:\Windows\system32\config\systemprofile\

5.When you navigate to the systemprofile folder it will for your permission, simply click Continue to access the folder.

6.Paste the Desktop folder into the systemprofile folder.

7.Restart your PC to save changes and see if you’re able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 4: Perform System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix Desktop Refers to A Location That Is Unavailable Error.

Method 5: Create a New User Account

1.Press Windows Key + I to open Settings and then click Accounts.

2.Click on Family & other people tab in the left-hand menu and click Add someone else to this PC under Other people.

3.Click I don’t have this person’s sign-in information in the bottom.

4.Select Add a user without a Microsoft account in the bottom.

5.Now type the username and password for the new account and click Next.

Log in to the new user account then:

1.Open the File Explorer then click on View > Options.

2.Switch to the View tab and checkmark Show hidden files, folders, and drives.

3.Uncheck Hide protected operating system files (Recommended).

4.Click Apply followed by OK.

5.Navigate to the following location:

C:\Users\Old_Username

Note: Here C is the drive on which Windows is installed and Old_Username is the name of your old account username.

6.Select all the files from above folder except the following:

Ntuser.dat
Ntuser.dat.log
Ntuser.ini

7.Now press Windows Key + R then type the following and hit Enter:

C:\users\%username%

Note: This will be your new user account folder.

8.Paste the copied content here and reboot your PC.

Recommended:

• Fix Unable to Set Default Printer Error 0x00000709
• Fix Microphone Not Working on Windows 10
• Remove Candy Crush Soda Saga from Windows 10
• Fix WiFi doesn’t connect automatically in Windows 10

That’s it you have successfully Fix Desktop Refers to A Location That Is Unavailable Error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravite crnu pozadinu radne površine u sustavu Windows 10

• Popravite da se udaljena radna površina ne povezuje u sustavu Windows 10

• Popravite ikone na radnoj površini nakon ažuriranja Windows 10 Creators

• Popravite nedostatak ikone na radnoj površini u sustavu Windows 10

• Popravi visoki CPU upravitelja prozora radne površine (DWM.exe)

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravak sigurnosne kopije sustava Windows nije uspio s pogreškom 0x807800C5

• Popravite kako se upravljačka ploča NVIDIA ne otvara

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Popravite Alt+Tab koji ne radi u sustavu Windows 10

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Popravite traku zadataka Windows 10 koja se ne skriva

• Popravite PNP otkrivenu fatalnu pogrešku Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Popravite Windows 7 ažuriranja koja se ne preuzimaju

• Popravi Ova kopija sustava Windows nije originalna Pogreška

• Popravak Nemogućnost otvaranja lokalnog diska (C:)