Popravak Nismo mogli ažurirati particiju rezerviranu za sustav: ^{(Fix We couldn’t update the system reserved partition: )} kada pokušate ažurirati ili nadograditi svoje računalo na noviju verziju sustava Windows , vjerojatno ćete vidjeti ovu pogrešku. Glavni uzrok ove pogreške je zbog nedovoljno dostupnog prostora na EFI sistemskoj rezerviranoj particiji na vašem tvrdom disku. Sustavna particija EFI ( ESP ) je particija na vašem tvrdom disku ili SSD -u koju koristi Windows koji se pridržava Unified Extensible Firmware Interface ( UEFI ). Kada se računalo pokrene, UEFI firmware učitava operativni sustav instaliran na ESP -u i razne druge uslužne programe.

Windows 10 couldn’t be installed
We couldn’t update the system reserved partition

Najlakši način na koji bi se ovaj problem mogao riješiti jest povećati veličinu rezervirane particije EFI sustava i to je ono što ćemo točno naučiti u ovom članku.

Nismo mogli ažurirati rezerviranu particiju sustava [ RJEŠENO^(SOLVED) ]

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Korištenje čarobnjaka za particije MiniTool^{(Method 1: Using MiniTool Partition Wizard)}

1.Preuzmite i instalirajte MiniTool Partition Wizard .

2. Zatim odaberite particiju rezerviranu za sustav i odaberite funkciju “ Proširi particiju. ^{(Extend Partition.)}“

3. Sada odaberite particiju s koje želite dodijeliti prostor particiji rezerviranoj sustavom s padajućeg izbornika Uzmi slobodan prostor iz^{(Take Free Space from)} . Zatim povucite klizač da odlučite koliko slobodnog prostora želite dodijeliti, a zatim kliknite U redu.

4. Iz glavnog sučelja možemo vidjeti da particija koja je rezervirana za sustav postaje 7,31 GB s originalnih 350 MB (To je samo demo, trebate samo povećati veličinu sistemske rezervirane particije na maksimalno 1 GB), stoga kliknite gumb "Primijeni" da biste primijenili promjene . Ovo se mora popraviti^(Fix) . Nismo mogli ažurirati rezerviranu particiju sustava, ali ako ne želite koristiti aplikaciju treće strane, slijedite sljedeću metodu kako biste riješili problem pomoću naredbenog retka.

Metoda 2: Koristite naredbeni redak^{(Method 2: Use Command Prompt)}

Prije nego što nastavite, prvo odredite imate li GTP ili MBR particiju:

1. Pritisnite tipku Windows +R zatim upišite “ diskmgmt.msc ” i pritisnite Enter.

2. Desnom tipkom miša kliknite svoj Disk (na primjer Disk 0 ) i odaberite svojstva.^{(select properties.)}

3. Sada odaberite karticu Volumes i provjerite pod Stil particije . ^(Partition)To bi trebao biti ili glavni zapis^{(Master Boot Record)} za pokretanje ( MBR ) ili GUID particijska tablica ( GPT ).

4. Dalje, odaberite metodu u nastavku u skladu s vašim stilom particije.

a) Ako imate GPT particiju^{(a)If you have a GPT partition)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2.Upišite sljedeću naredbu u cmd i pritisnite Enter : mountvol y: /s
Ovo će dodati slovo pogona Y: kako biste pristupili sistemskoj particiji^{(System Partition)} .

3. Opet upišite taskkill /im explorer.exe /f i pritisnite Enter . Zatim upišite explorer.exe i pritisnite Enter da ponovno pokrenete explorer u Admin modu.

Windows Key + E da otvorite File Explorer , a zatim upišite Y:\EFI\Microsoft\Boot\ u adresnu traku.

5. Zatim odaberite sve ostale jezične mape osim engleskog^{(all the other language folders except English)} i trajno ih izbrišite. ^{( permanently delete them.)}
Na primjer, en-US znači američki engleski^{(U.S. English)} ; de-DE znači njemački.

6. Također uklonite neiskorištene datoteke fontova na Y:\EFI\Microsoft\Boot\Fonts.

7. Ponovno pokrenite računalo da biste spremili promjene. Ako imate GPT particiju, gornji koraci će definitivno  popraviti. Nismo mogli ažurirati rezerviranu particiju sustava,^{(Fix We couldn’t update the system reserved partition)} ali ako imate MBR particiju, slijedite sljedeću metodu.

b) Ako imate MBR particiju^{(b)If you have MBR partition)}

Napomena: ^(Note:) Provjerite^(Make) imate li sa sobom USB flash pogon (formatiran kao NTFS ) s najmanje 250 MB slobodnog prostora.

1. Pritisnite tipku Windows + R zatim upišite diskmgmt.msc i pritisnite Enter.

2. Odaberite particiju za oporavak^{(Recovery Partition)} i kliknite desnom tipkom miša na nju, a zatim odaberite Promijeni slova pogona i staze.^{(Change Drive Letters and Paths.)}

3. Odaberite Dodaj i unesite Y^{(Add and enter Y)} za slovo pogona i kliknite U redu

4. Pritisnite tipku Windows Key + X , a zatim odaberite Command Prompt (Admin).

5.Upišite sljedeće u cmd:

Y:
takeown /d y /r /f .  ( Provjerite jeste li stavili razmak iza "f" i također uključite^{(Make sure you put a space after the “f” and also include the period)} točku )
whoami (Ovo će vam dati korisničko ime koje ćete koristiti u sljedećoj naredbi)
icacls . /grant <username from whoami>:F /t  (Ne stavljajte razmak između korisničkog imena i “:F”) ^{((Do not put a space between the username and “:F”))}
attrib -s -r -h Y:\Recovery\WindowsRE\winre.wim

(Nemojte još zatvoriti cmd)

6. Zatim otvorite File Explorer i zabilježite slovo pogona vanjskog pogona koji koristite (u našem slučaju
to je F:).

7.Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

mkdir F:\Recovery\WindowsRE
xcopy Y:\Recovery\WindowsRE\winre.wim F:\Recovery\WindowsRE\winre.wim /h
C:\Windows\System32\Reagentc /SetREImage /Path F:\Recovery\WindowsRE /Target C:\Windows
del Y:\Recovery\WindowsRE\winre.wim /F

8. Vratite se na Upravljanje diskom,^{(Disk Management)} zatim kliknite na izbornik Radnja^{(click Action menu)} i odaberite Osvježi.^(Refresh.)

9. Provjerite je li se povećala veličina sistemske rezervirane particije^{(System Reserved Partition)} , ako jest, nastavite sa sljedećim korakom.

10. Sada kada je sve gotovo, trebali bismo premjestiti  wim datoteku natrag na particiju za oporavak^{(wim file back to the Recovery Partition)} i ponovno mapirati lokaciju.

11.Upišite sljedeću naredbu i pritisnite Enter :

xcopy F:\Recovery\WindowsRE\winre.wim Y:\Recovery\WindowsRE\winre.wim /h
C:\Windows\System32\Reagentc /SetREImage /Path Y:\Recovery\WindowsRE /Target C:\Windows

12. Opet odaberite prozor Upravljanje diskom^{(Disk Management)} i desnom tipkom miša kliknite particiju za oporavak^{(Recovery Partition)} , a zatim odaberite Promjena slova pogona^{(Change Drive Letter)} i staza^(Paths) . Odaberite Y^{(Select Y)} : i odaberite Ukloni.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravak Developer Mode paketa nije uspio instalirati Kod pogreške 0x80004005^{(Fix Developer Mode package failed to install Error code 0x80004005)}
• Kako popraviti pogrešku Ne možemo sinkronizirati odmah 0x8500201d^{(How to Fix We Can’t Sync Right Now Error 0x8500201d)}
• Popravite pogrešku trgovine Windows 10 0x80073cf9^{(Fix Windows 10 Store Error 0x80073cf9)}
• Windows Explorer je prestao raditi [RIJEŠENO]

To je to što ste uspješno popravili. Nismo mogli ažurirati rezerviranu particiju sustava,^{(Fix We couldn’t update the system reserved partition)} ali ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix We couldn't update the system reserved partition [SOLVED]

Fix We couldn’t update the system reserved partition: When you try to update or upgrade your PC to a newer version of Windows it likely that you will see this error. The main cause of this error is because of insufficient available space on EFI system reserved partition on your hard disk. The EFI system partition (ESP) is a partition on your hard disk or SSD which is used by Windows adhering to the Unified Extensible Firmware Interface (UEFI). When a computer is booted UEFI firmware loads operating system installed on ESP and various other utilities.

Windows 10 couldn’t be installed
We couldn’t update the system reserved partition

Now the easiest way this issue could be fixed is to increase the size of EFI system reserved partition and that’s what exactly we are going to teach in this article.

We couldn’t update the system reserved partition [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Using MiniTool Partition Wizard

1.Download and install MiniTool Partition Wizard.

2.Next, select the system reserved partition and choose the function “Extend Partition.“

3.Now choose a partition from which you want to allocate space to the system reserved partition from the drop-down Take Free Space from. Next, drag the slider to decide how much free space you want to allocate and then click OK.

4.From the main interface we can see system reserved partition becomes 7.31GB from original 350MB (It’s just a demo, you should only increase the size of system reserved partition to maximum 1 GB), so please click “Apply” button to apply changes. This must Fix We couldn’t update the system reserved partition but if you don’t want to use the third-party application then follow the next method in order to fix the issue using the command prompt.

Method 2: Use Command Prompt

Before continuing, first determine whether you have a GTP or MBR partition:

1.Press Windows Key +R then type “diskmgmt.msc” and hit Enter.

2.Right-click on your Disk (for example Disk 0) and select properties.

3.Now select the Volumes tab and check under Partition style. It should be either Master Boot Record(MBR) or GUID partition table (GPT).

4.Next, select the below method according to your partition style.

a)If you have a GPT partition

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command in the cmd and hit Enter: mountvol y: /s
This will add the Y: drive letter in order to access the System Partition.

3.Again type taskkill /im explorer.exe /f and press Enter. Then type explorer.exe and press Enter to restart explorer in Admin mode.

4.Press Windows Key + E to open File Explorer then type Y:\EFI\Microsoft\Boot\ in the address bar.

5.Then select the all the other language folders except English and permanently delete them.
For example, en-US means U.S. English; de-DE means German.

6.Also remove unused font files at Y:\EFI\Microsoft\Boot\Fonts.

7.Reboot your PC to save changes. If you have a GPT partition the above steps will definitely Fix We couldn’t update the system reserved partition but if you have an MBR partition then follow the next method.

b)If you have MBR partition

Note: Make sure you have a USB flash drive with you (formatted as NTFS) with at least 250MB free space.

1.Press Windows Key + R then type diskmgmt.msc and hit Enter.

2.Select the Recovery Partition and right-click on it then select Change Drive Letters and Paths.

3.Choose Add and enter Y for the drive letter and click OK

4.Press Windows Key + X then select Command Prompt (Admin).

5.Type the following in cmd:

Y:
takeown /d y /r /f .  (Make sure you put a space after the “f” and also include the period)
whoami (This will give you username to use in the next command)
icacls . /grant <username from whoami>:F /t  (Do not put a space between the username and “:F”)
attrib -s -r -h Y:\Recovery\WindowsRE\winre.wim

(Don’t yet close the cmd)

6.Next, open File Explorer and note down the drive letter of the external drive you ‘re using (In our case
it’s F:).

7.Type the following command in cmd and press Enter after each one:

mkdir F:\Recovery\WindowsRE
xcopy Y:\Recovery\WindowsRE\winre.wim F:\Recovery\WindowsRE\winre.wim /h
C:\Windows\System32\Reagentc /SetREImage /Path F:\Recovery\WindowsRE /Target C:\Windows
del Y:\Recovery\WindowsRE\winre.wim /F

8.Go back to Disk Management then click Action menu and select Refresh.

9.Check if the size of the System Reserved Partition has increased, if so then continue with the next step.

10.Now once everything is done, we should move the wim file back to the Recovery Partition and re-map the location.

11.Type the following command and hit Enter:

xcopy F:\Recovery\WindowsRE\winre.wim Y:\Recovery\WindowsRE\winre.wim /h
C:\Windows\System32\Reagentc /SetREImage /Path Y:\Recovery\WindowsRE /Target C:\Windows

12.Again select Disk Management window and right-click the Recovery Partition then select Change Drive Letter and Paths. Select Y: and choose remove.

Recommended for you:

• Fix Developer Mode package failed to install Error code 0x80004005
• How to Fix We Can’t Sync Right Now Error 0x8500201d
• Fix Windows 10 Store Error 0x80073cf9
• Windows Explorer has stopped working [SOLVED]

That’s it you have successfully Fix We couldn’t update the system reserved partition but if you still have questions regarding this guide please feel free to ask them in the comment’s section.

Related posts

• Popravak Windowsa nije mogao dovršiti instalaciju [RJEŠENO]

• Popravak MSVCR120.dll nedostaje u sustavu Windows 10 [RJEŠENO]

• Popravite kako se Windows 10 ne pokreće s USB-a [RJEŠENO]

• Popravi pogrešku pri prijavi na Nexus Mod Manager [RJEŠENO]

• Popravite upozorenje o smanjenoj memoriji vašeg računala [RJEŠENO]

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Popravi Windows Update zaglavljen na 0% [RIJEŠENO]

• Zamrzavanje indeksa iskustva u sustavu Windows [RIJEŠENO]

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Popravi USB se neprestano odvaja i ponovno povezuje

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Popravite računalo koje ne prepoznaje iPhone

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Popravite kako se upravljačka ploča NVIDIA ne otvara

• Popravite ponovno pokretanje Windows računala bez upozorenja

• Popravite traku zadataka Windows 10 koja se ne skriva

• Kako popraviti grešku aplikacije 0xc0000005

• Kako popraviti računalo ne objavljuje