Popravite kako Ethernet ne radi u sustavu Windows 10:^{(Fix Ethernet Not Working in Windows 10:)} Ako ne možete pristupiti internetu putem Ethernet kabela, morate riješiti ovaj problem. Ako otvorite Centar za ^{(Sharing Center)}mrežu^(Network) i dijeljenje, vidjet ćete da računalo ne prepoznaje ethernet vezu. Ali ako pokušate pristupiti internetu kada ste povezani putem WiFi -a s istom vezom, tada ćete moći pregledavati internet, što znači da problem može biti uzrokovan neispravnom konfiguracijom mreže, oštećenim ili zastarjelim mrežnim upravljačkim programima, oštećenim ili neispravnim ethernet kabelom, hardverski problemi itd.

Korisnici koji preferiraju Ethernet u odnosu na WiFi doživljavaju katastrofu zbog ovog problema jer ne mogu pristupiti  internetu^(Internet) putem Ethernet kabela. Ako ste ažurirali ili nadogradili na Windows 10 , Ethernet ne radi u sustavu Windows 10^{(Windows 10)} uobičajen je problem. Srećom, postoji mnogo dostupnih popravaka za koje se čini da rješavaju ovaj problem. Dakle, bez gubljenja vremena, pogledajmo kako popraviti Ethernet^{(Fix Ethernet)} da ne radi u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Popravak koji Ethernet^{(Fix Ethernet)} ne radi u sustavu Windows 10^{(Windows 10)} [RIJEŠENO]

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Prije nego što nastavite, svakako slijedite ove osnovne korake da biste riješili problem:

• Pokušajte spojiti ethernet kabel na drugi priključak na usmjerivaču jer postoji velika vjerojatnost da je određeni priključak oštećen.
• Pokušajte upotrijebiti drugi kabel jer bi se sam kabel mogao oštetiti.
• Pokušajte odspojiti kabel pa ga ponovno spojiti.
• Pokušajte spojiti Ethernet na drugo računalo da vidite je li problem riješen. Ako Ethernet radi na drugom računalu, hardver vašeg računala bi mogao biti oštećen i morate ga poslati na popravak.

Metoda 1: Pokrenite alat za rješavanje problema s mrežom^{(Run Network Troubleshooter)}

1. Pritisnite Windows Key + I za otvaranje postavki^(Settings) , a zatim kliknite na Ažuriranje i sigurnost.^{( Update & Security.)}

2. Na lijevom izborniku odaberite Rješavanje problema.^{( Troubleshoot.)}

3. Pod Troubleshoot kliknite Internet Connections , a zatim kliknite Pokreni alat za rješavanje problema.^{(Run the troubleshooter.)}

4. Slijedite daljnje upute na zaslonu za pokretanje alata za rješavanje problema.

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 2: Resetirajte Ethernet adapter^{(Method 2: Reset the Ethernet Adapter)}

1. Pritisnite tipku Windows + I za otvaranje postavki^{( Settings)} , a zatim kliknite na ikonu Mreža i internet.^{(Network & Internet icon.)}

2. Na lijevom izborniku kliknite na Status.

3. Sada pod Status pomaknite se prema dolje i kliknite na vezu za resetiranje mreže.^{( Network reset link.)}

4. Na stranici mrežnog^(Network) resetiranja kliknite na gumb “ Reset now ”.

5. Sada ponovno pokušajte povezati Ethernet s računalom i provjerite možete li popraviti da Ethernet ne radi u sustavu Windows 10.^{(Fix Ethernet Not Working in Windows 10.)}

Metoda 3: Omogućite Ethernet uređaj i ažurirajte upravljačke programe^{(Method 3: Enable Ethernet Device and Update Drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja.^{(Device Manager.)}

2.Proširite Mrežni adapteri, zatim desnom tipkom miša kliknite svoj Ethernet^{(right-click on your Ethernet)} uređaj i odaberite Omogući.^(Enable.)

Napomena:^(Note:) ako je već omogućen, preskočite ovaj korak.

3. Opet kliknite desnom tipkom miša i odaberite Ažuriraj upravljački program.^{(Update Driver.)}

4. Odaberite “ Automatsko traženje ažuriranog softvera upravljačkog programa^{(Search automatically for updated driver software)} ” i dopustite da automatski instalira sve nove dostupne upravljačke programe.

5. Ponovo pokrenite računalo da biste spremili promjene i ponovno provjerite možete li  popraviti da Ethernet ne radi u sustavu Windows 10^{(Fix Ethernet Not Working in Windows 10)}  ili ne.

6. Ako ne, onda ponovno idite na Upravitelj uređaja^{(Device Manager)} , desnom tipkom miša kliknite svoj Ethernet uređaj^{(Ethernet device)} i odaberite Ažuriraj upravljački program.^{(Update Driver.)}

7. Ovaj put odaberite " Pregledaj moje računalo za softver upravljačkog programa. ^{(Browse my computer for driver software.)}“

8. Sada kliknite " Pusti me da odaberem s popisa dostupnih upravljačkih programa na mom računalu. ^{(Let me pick from a list of available drivers on my computer.)}“

9. Odaberite najnoviji upravljački program Realtek PCIe FE Family Controller^{(Realtek PCIe FE Family Controller driver)} i kliknite Dalje.^{( Next.)}

10. Pustite ga da instalira nove upravljačke programe i ponovno pokrene vaše računalo.

Metoda 4: Omogućite Ethernet vezu^{(Method 4: Enable Ethernet Connection)}

1. Pritisnite tipku Windows + R zatim upišite ncpa.cpl i pritisnite Enter da otvorite mrežne veze.^{(Network Connections.)}

2. Desnom tipkom miša kliknite na Ethernet vezu i odaberite Omogući^(Enable) .

3.Ovo će omogućiti Ethernet vezu, ponovno se pokušajte spojiti na Ethernet mrežu.^{( connect to the Ethernet network.)}

Metoda 5: Privremeno onemogućite antivirusni ili vatrozid^{(Method 5: Temporarily Disable Antivirus or Firewall)}

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno pokušajte pristupiti Internetu^(Internet) i provjerite je li pogreška riješena ili ne.

4.Upišite kontrolu^(control) u Windows Search , a zatim kliknite na Upravljačka ploča^{(Control Panel)} iz rezultata pretraživanja.

5. Dalje, kliknite na Sustav i sigurnost, a ^{( System and Security and )} zatim kliknite na Vatrozid za Windows.^{(Windows Firewall.)}

6. Sada u lijevom oknu prozora kliknite na Uključi ili isključi vatrozid sustava Windows.^{(Turn Windows Firewall on or off.)}

7. Odaberite Isključi Windows vatrozid^{(Select Turn off Windows Firewall)} i ponovno pokrenite računalo . Ponovno pokušajte pristupiti internetu i provjerite možete li  popraviti da Ethernet ne radi u sustavu Windows 10.^{(Fix Ethernet Not Working in Windows 10.)}

Ako gornja metoda ne radi, svakako slijedite iste korake kako biste ponovno uključili vatrozid.

Method 6: Flush DNS and Reset TCP/IP

1. Desnom tipkom miša kliknite gumb Windows^{(Windows Button)} i odaberite “ Command Prompt (Admin). “

2. Sada upišite sljedeću naredbu i pritisnite Enter nakon svake:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Ponovo otvorite Admin Command Prompt i upišite sljedeće i pritisnite enter nakon svakog:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
netsh winsock reset catalog
netsh int ipv4 reset reset.log

4. Ponovo pokrenite da biste primijenili promjene. Čini se da  ispiranje DNS -a ^(DNS)popravlja Ethernet koji ne radi u sustavu Windows 10.^{(Fix Ethernet Not Working in Windows 10.)}

Metoda 7: Promijenite postavke upravljanja napajanjem za Ethernet^{(Method 7: Change Power Management Settings for Ethernet)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja.^{(Device Manager.)}

2.Proširite Mrežni^(Network) adapteri, zatim desnom tipkom miša kliknite svoj Ethernet uređaj^{(Ethernet device)} i odaberite Svojstva.^{(Properties.)}

3. Prijeđite na karticu Upravljanje napajanjem^{(Power Management)} ispod prozora Ethernet Properties .

4. Dalje, poništite kvačicu^(uncheck) " Dopusti računalu da isključi ovaj uređaj radi uštede energije^{(Allow the computer to turn off this device to save power)} ".

5. Kliknite Primijeni, a zatim OK.

6. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 8: Koristite Google DNS^{(Method 8: Use Google DNS)}

1.Otvorite upravljačku ploču i kliknite na Mreža i internet.^{(Network and Internet.)}

2. Dalje, kliknite  Centar za mrežu i dijeljenje, a^{(Network and Sharing Center)}  zatim kliknite  Promjena postavki adaptera.^{(Change adapter settings.)}

3. Odaberite svoj Wi-Fi, a zatim dvaput kliknite na njega i odaberite  Svojstva.^{(Properties.)}

4. Sada odaberite  Internet Protocol Version 4 (TCP/IPv4)  i kliknite Svojstva.^{(Properties.)}

5. Označite " Koristi sljedeće adrese DNS poslužitelja^{(Use the following DNS server addresses)} " i upišite sljedeće:

Preferirani DNS poslužitelj: 8.8.8.8 ^{(Preferred DNS server: 8.8.8.8)}
Alternativni DNS poslužitelj: 8.8.4.4^{(Alternate DNS server: 8.8.4.4)}

6. Zatvorite sve i možda ćete moći  popraviti da Ethernet ne radi u sustavu Windows 10.^{(Fix Ethernet Not Working in Windows 10.)}

Preporučeno:^{(Recommended:)}

• Popravite HP Touchpad koji ne radi u sustavu Windows 10^{(Fix HP Touchpad Not Working in Windows 10)}
• Kako izdvojiti slike iz Word dokumenta 2019 [VODIČ]
• Preuzmite službeni Windows 10 ISO bez alata za kreiranje medija^{(Download official Windows 10 ISO without Media Creation Tool)}
• Popravak MSVCP140.dll nedostaje u sustavu Windows 10^{(Fix MSVCP140.dll is Missing in Windows 10)}

To je to što ste uspješno popravili da Ethernet ne radi u sustavu Windows 10^{(Fix Ethernet Not Working in Windows 10)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix Ethernet Not Working in Windows 10 [SOLVED]

Fix Ethernet Not Working in Windows 10: If you’re not able to access the internet via Ethernet cable, then you need to troubleshoot this issue. If you will open the Network and Sharing Center you will find that the PC doesn’t recognize the ethernet connection. But if you try to access the internet when connected over WiFi with the same connection then you will be able to browse the internet which means the problem may be caused because of incorrect network configuration, corrupt or outdated network drivers, damaged or faulty ethernet cable, hardware issues etc.

Users who prefer Ethernet over WiFi are having a disaster because of this issue as they are not able to access the Internet via Ethernet cable. If you have updated or upgraded to Windows 10 then Ethernet not working in Windows 10 is a common issue. Thankfully there are a lot of fixes availbale which seems to fix this problem. So without wasting any time let’s see How to Fix Ethernet Not Working in Windows 10 with the help of the below-listed troubleshooting guide.

Fix Ethernet Not Working in Windows 10 [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Before continuing, make sure to follow these basic steps to fix the problem:

• Try to connect the ethernet cable to another port on the router, as chances are the particular port might be damaged.
• Try to use another cable, as the cable itself might be damaged.
• Try to unplug the cable then again reconnect.
• Try to connect the ethernet to another PC to see if the problem is resolved. If the ethernet works on the other PC then your PC hardware might be damaged and you need to send it to repair.

Method 1: Run Network Troubleshooter

1.Press Windows Key + I to open Settings then click on Update & Security.

2.From the left-hand menu select Troubleshoot.

3.Under Troubleshoot click on Internet Connections and then click Run the troubleshooter.

4.Follow further on-screen instructions to run the troubleshooter.

5.Reboot your PC to save changes.

Method 2: Reset the Ethernet Adapter

1.Press Windows Key + I to open Settings then click on the Network & Internet icon.

2.From the left-hand menu click on Status.

3.Now under Status scroll down to bottom and click on Network reset link.

4.On the Network reset page, click on “Reset now” button.

5.Now again try to connect the Ethernet with PC and see if you’re able to Fix Ethernet Not Working in Windows 10.

Method 3: Enable Ethernet Device and Update Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters, then right-click on your Ethernet device and select Enable.

Note: If it’s already enabled then skip this step.

3.Again right-click on it and select Update Driver.

4.Select “Search automatically for updated driver software” and let it automatically install any new drivers available.

5.Reboot your PC to save changes and again check if you’re able to Fix Ethernet Not Working in Windows 10 or not.

6.If not, then again go to Device Manager, right-click on your Ethernet device and select Update Driver.

7.This time select “Browse my computer for driver software.“

8.Now click “Let me pick from a list of available drivers on my computer.“

9.Select the latest Realtek PCIe FE Family Controller driver and click Next.

10.Let it install the new drivers and reboot your PC.

Method 4: Enable Ethernet Connection

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

2.Right-click on Ethernet connection and select Enable.

3.This will enable the Ethernet connection, again try to connect to the Ethernet network.

Method 5: Temporarily Disable Antivirus or Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to access the Internet and check if the error resolves or not.

4.Type control in Windows Search then click on Control Panel from the search result.

5.Next, click on System and Security and then click on Windows Firewall.

6.Now from the left window pane click on Turn Windows Firewall on or off.

7.Select Turn off Windows Firewall and restart your PC. Again try to access the internet and see if you’re able to Fix Ethernet Not Working in Windows 10.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 6: Flush DNS and Reset TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).“

2.Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.Again open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
netsh winsock reset catalog
netsh int ipv4 reset reset.log

4.Reboot to apply changes. Flushing DNS seems to Fix Ethernet Not Working in Windows 10.

Method 7: Change Power Management Settings for Ethernet

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters, then right-click on your Ethernet device and select Properties.

3.Switch to Power Management tab under the Ethernet Properties window.

4.Next, uncheck “Allow the computer to turn off this device to save power“.

5.Click Apply followed by OK.

6.Reboot your PC to save changes.

Method 8: Use Google DNS

1.Open Control Panel and click on Network and Internet.

2.Next, click Network and Sharing Center then click on Change adapter settings.

3.Select your Wi-Fi then double click on it and select Properties.

4.Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5.Checkmark “Use the following DNS server addresses” and type the following:

Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

6.Close everything and you may be able to Fix Ethernet Not Working in Windows 10.

Recommended:

• Fix HP Touchpad Not Working in Windows 10
• How to Extract Images from Word Document 2019 [GUIDE]
• Download official Windows 10 ISO without Media Creation Tool
• Fix MSVCP140.dll is Missing in Windows 10

That’s it you have successfully Fix Ethernet Not Working in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Popravak MSVCR120.dll nedostaje u sustavu Windows 10 [RJEŠENO]

• Popravi kašnjenje unosa tipkovnice u sustavu Windows 10 [RJEŠENO]

• USB uređaj ne radi u sustavu Windows 10 [RIJEŠENO]

• Pokazivač miša zaostaje u sustavu Windows 10 [RIJEŠENO]

• WiFi se stalno prekida u sustavu Windows 10 [RIJEŠENO]

• Popravi zaključavanje rotacije zasivljeno u sustavu Windows 10

• Popravite prenizak zvuk računala u sustavu Windows 10

• Kako popraviti visoku upotrebu CPU-a u sustavu Windows 10

• Upravljački program zaslona prestao je reagirati i oporavio je pogrešku [RJEŠENO]

• Popravite HDMI bez zvuka u sustavu Windows 10 kada je spojen na TV

• Popravak prozora domaćina zadataka sprječava gašenje u sustavu Windows 10

• Popravite Spotify koji se ne otvara u sustavu Windows 10

• Numerička tipkovnica ne radi u sustavu Windows 10 [RJEŠENO]

• Popravite problem s tipkovnicom koja ne tipka u sustavu Windows 10

• Opcija Pin to Start Menu Nedostaje u Windows 10 [RJEŠENO]

• Miš i tipkovnica ne rade u sustavu Windows 10 [RIJEŠENO]

• Kako popraviti da nedostaje BOOTMGR u sustavu Windows 10

• Popravite crnu pozadinu radne površine u sustavu Windows 10

• Aplikacija za fotografije se stalno ruši u sustavu Windows 10 [RIJEŠENO]

• Popravak VCRUNTIME140.dll nedostaje u sustavu Windows 10