Popravak koda pogreške 0x80070035 Mrežni put nije pronađen: ^{(Fix Error code 0x80070035 The network path was not found: )} U sustavu Microsoft Windows^{(Microsoft Windows)} dijeljenje iste mreže omogućuje pristup datotekama i podacima na međusobnom računalu bez povezivanja s ethernet kabelom. Ali ponekad, ako hostirate svoje računalo na mreži, možda ćete vidjeti poruku koja kaže " Šifra pogreške^(Error) : 0x80070035. Mrežni put nije pronađen.”

Pa, postoje različiti razlozi zašto možda vidite ovaj kod pogreške, ali uglavnom je uzrokovan antivirusnim^(Antivirus) ili vatrozidom^(Firewall) koji blokira resurse. U svakom slučaju^(Anyway) , bez gubljenja vremena, pogledajmo kako zapravo popraviti^{(Fix Error)} kod pogreške 0x80070035 Mrežni put nije pronađen s dolje navedenim vodičem za rješavanje problema.

Popravak^{(Fix Error)} koda pogreške 0x80070035 Mrežni put nije pronađen

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Privremeno onemogućite antivirusni program i vatrozid^{(Method 1: Temporarily Disable Antivirus and Firewall)}

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno provjerite je li pogreška riješena ili ne.

4. Pritisnite tipku Windows + I, a zatim odaberite Upravljačka ploča.^{( Control Panel.)}

5.Sljedeće kliknite na Sustav i sigurnost.^{( System and Security.)}

6. Zatim kliknite na Windows vatrozid.^{(Windows Firewall.)}

7. Sada u lijevom oknu prozora kliknite na Uključi ili isključi Windows vatrozid .^{(Turn Windows Firewall)}

8. Odaberite Isključi Windows vatrozid i ponovno pokrenite računalo. ^{(Select Turn off Windows Firewall and restart your PC. )}I provjerite možete li  popraviti kod pogreške 0x80070035 Mrežni put nije pronađen.^{(Fix Error code 0x80070035 The network path was not found.)}

Ako gornja metoda ne radi, svakako slijedite iste korake kako biste ponovno uključili vatrozid.

Metoda 2: Izbrišite skrivene mrežne adaptere^{(Method 2: Delete Hidden Network Adapters)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja.^{(Device Manager.)}

2. Sada odaberite Mrežni adapteri^{(Network Adapters)} , a zatim kliknite View > Show hidden devices.

3. Desnom tipkom miša kliknite svaki od skrivenih uređaja i odaberite Deinstaliraj uređaj.^{(Uninstall device.)}

4.Učinite to za sve skrivene uređaje navedene pod Mrežni adapteri^{(Network Adapters)} .

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 3: Uključite Network Discovery^{(Method 3: Turn ON Network Discovery)}

1. Pritisnite Windows Key + X , a zatim odaberite Upravljačka ploča.^{(Control Panel.)}

2. Sada kliknite Mreža^(Network) i internet , a zatim kliknite Prikaži status mreže i zadatke.^{(View network status and tasks.)}

3. Ovo će vas odvesti u Centar za ^{(Sharing Center)}mrežu^(Network) i dijeljenje , odakle na lijevom izborniku kliknite Promjena naprednih postavki dijeljenja .^{( Change Advanced Sharing settings)}

4.Kvačica Uključi otkrivanje mreže^{(Turn on network discovery)} i kliknite Spremi promjene.

5. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li  popraviti kod pogreške 0x80070035 Mrežni put nije pronađen.^{(Fix Error code 0x80070035 The network path was not found.)}

Method 4: Enable NetBIOS over TCP/IP

1. Pritisnite tipku Windows + R zatim upišite ncpa.cpl i pritisnite Enter.

2. Desnom tipkom miša kliknite svoju aktivnu Wi-Fi ili ethernet vezu i odaberite Svojstva.^{( Properties.)}

3. Odaberite Internet Protocol Version 4 (TCP/IPv4) i kliknite Svojstva.

4. Sada kliknite Napredno^{( Advanced)} u sljedećem prozoru, a zatim prijeđite na karticu WINS pod ^(WINS)Advanced TCP/IP Settings.

5. Pod postavkom NetBIOS , označite " Enable NetBIOS over TCP/IP ", a zatim kliknite OK.

6. Ponovo pokrenite računalo da biste spremili promjene

Metoda 5: Ručno unesite korisničko ime i lozinku svih računala putem mreže^{(Method 5: Manually enter all PC’s username and password over the network)}

1. Pritisnite Windows Key + X , a zatim odaberite Upravljačka ploča.^{(Control Panel.)}

2.Upišite Credential u pretragu na upravljačkoj ploči i kliknite na Credential Manager.

3.Odaberite Windows vjerodajnice^{(Windows Credentials)} , a zatim kliknite na Dodaj vjerodajnicu za Windows.^{( Add a Windows credential.)}

4. Jedno po jedno upišite korisničko ime i lozinku^{(username and password)} za svaki uređaj spojen na mrežu.

5. Slijedite ovo na računalu spojenom na računalo i to će  popraviti kod pogreške 0x80070035 Mrežni put nije pronađen.^{(Fix Error code 0x80070035 The network path was not found.)}

Metoda 6: Provjerite je li vaš disk zajednički^{(Method 6: Make sure your drive is shared)}

1. Desnom tipkom miša kliknite pogon koji želite dijeliti i odaberite Svojstva.^{(Properties.)}

2. Prebacite se na karticu Dijeljenje^{(Sharing tab)} i ako pod Mrežni put^{(Network Path)} piše Nije podijeljeno, kliknite gumb Napredno dijeljenje.^{(Advanced Sharing button.)}

3. Označite " Dijeli ovu mapu^{(Share this folder)} " i provjerite je li naziv dijeljenja^(Share) ispravan.

4. Kliknite na Primijeni, a zatim na OK.

Metoda 7: Promijenite postavke mrežne sigurnosti^{(Method 7: Change Network Security settings)}

1. Pritisnite tipku Windows + R zatim upišite secpol.msc i pritisnite Enter.

2. Idite na sljedeću stazu u prozoru Lokalne sigurnosne politike^(Policy) :

Local Policies > Security Options > Network security: LAN Manager authentication level

3. Dvaput kliknite na Sigurnost mreže: razina provjere autentičnosti LAN Managera^{( Network security: LAN Manager authentication level)} u prozoru s desne strane.

4. Sada s padajućeg izbornika odaberite Pošalji LM & NTLM-koristi sigurnost sesije NTLMv2 ako je dogovoreno.^{( Send LM & NTLM-use NTLMv2 session security if negotiated.)}

5. Kliknite Primijeni, a zatim OK.

Ponovo pokrenite^(Reboot) računalo i nakon ponovnog pokretanja provjerite jeste li u mogućnosti  popraviti^{(Fix Error)} kod pogreške 0x80070035 Mrežni put nije pronađen, ako nije, nastavite sa sljedećom metodom.

Method 8: Reset TCP/IP

1. Desnom tipkom miša kliknite gumb Windows^{(Windows Button)} i odaberite “ Command Prompt (Admin). “

2. Sada upišite sljedeću naredbu i pritisnite enter nakon svake:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew

3. Ponovo otvorite Admin Command Prompt i upišite sljedeće i pritisnite enter nakon svakog:

• ipconfig /flushdns
• nbtstat –r
• netsh int ip reset
• netsh winsock reset

4. Ponovo pokrenite da biste primijenili promjene.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi crni zaslon s pokazivačem pri pokretanju^{(Fix Black Screen With Cursor On Startup)}
• Ispravite pogreške 2502 i 2503 tijekom instaliranja ili deinstaliranja^{(Fix Error 2502 and 2503 while installing or uninstalling)}
• 6 načina da popravite Windows trgovina se neće otvoriti^{(6 Ways To Fix Windows Store Won’t Open)}
• Kako popraviti Chrome se ne otvara ili ne pokreće^{(How to Fix Chrome Won’t Open or Launch)}

To je to što ste uspješno popravili kod pogreške 0x80070035 Mrežni put nije pronađen^{(Fix Error code 0x80070035 The network path was not found)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

Fix Error code 0x80070035 The network path was not found

Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”

Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually Fix Error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.

Fix Error code 0x80070035 The network path was not found

Make sure to create a restore point just in case something goes wrong.

Method 1: Temporarily Disable Antivirus and Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. And see if you’re able to Fix Error code 0x80070035 The network path was not found.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Delete Hidden Network Adapters

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Now select Network Adapters and then click View > Show hidden devices.

3.Right-click on each of the hidden devices and select Uninstall device.

4.Do this for all the hidden devices listed under Network Adapters.

5.Reboot your PC to save changes.

Method 3: Turn ON Network Discovery

1.Press Windows Key + X then select Control Panel.

2.Now click Network and Internet and then click View network status and tasks.

3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings from the left-hand menu.

4.Check mark Turn on network discovery and click Save changes.

5.Reboot your PC to save changes and see if you are able to Fix Error code 0x80070035 The network path was not found.

Method 4: Enable NetBIOS over TCP/IP

1.Press Windows Key + R then type ncpa.cpl and hit Enter.

2.Right-click on your active Wi-Fi or ethernet connection and select Properties.

3.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

4.Now click Advanced in the next window and then switch to WINS tab under Advanced TCP/IP Settings.

5.Under NetBIOS setting, check mark “Enable NetBIOS over TCP/IP“, and then click OK.

6.Reboot your PC to save changes

Method 5: Manually enter all PC’s username and password over the network

1.Press Windows Key + X then select Control Panel.

2.Type Credential in the control panel search and click on Credential Manager.

3.Select Windows Credentials and then click on Add a Windows credential.

4.One by one type the username and password of each machine connected to the network.

5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.

Method 6: Make sure your drive is shared

1.Right-click on the drive which you want to be shared and select Properties.

2.Switch to Sharing tab and if under Network Path it says Not Shared then click on Advanced Sharing button.

3.Check mark “Share this folder” and make sure the Share name is correct.

4.Click Apply followed by OK.

Method 7: Change Network Security settings

1.Press Windows Key + R then type secpol.msc and hit Enter.

2.Navigate to the following path under Local Security Policy window:

Local Policies > Security Options > Network security: LAN Manager authentication level

3.Double click on Network security: LAN Manager authentication level in the right-hand side window.

4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.

5.Click Apply followed by OK.

Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.

Method 8: Reset TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).“

2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew

3.Again open Admin Command Prompt and type the following and hit enter after each one:

• ipconfig /flushdns
• nbtstat –r
• netsh int ip reset
• netsh winsock reset

4.Reboot to apply changes.

Recommended for you:

• Fix Black Screen With Cursor On Startup
• Fix Error 2502 and 2503 while installing or uninstalling
• 6 Ways To Fix Windows Store Won’t Open
• How to Fix Chrome Won’t Open or Launch

That’s it you have successfully Fix Error code 0x80070035 The network path was not found but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Kako popraviti pogrešku odbijenog pristupa Google disku

• Popravite pogrešku trgovine Windows 10 0x80073cf9

• Popravi pogrešku io.netty.channel.AbstractChannel$AnnotatedConnectException u Minecraftu

• Popravi grešku učitavanja aplikacije Steam 3:0000065432

• Popravi pogrešku provjere autentičnosti pristupnika modema U-Verse

• Popravak Developer Mode paketa nije uspio instalirati Kod pogreške 0x80004005

• Popravite pogrešku Windows Update 0x800704c7

• Ispravite pogrešku Windows 10 Ažuriranja neće instalirati

• Fix USB Error Code 52 Windows ne može provjeriti digitalni potpis

• Kako popraviti grešku aplikacije 0xc000007b

• Popravi pogrešku PAGE_FAULT_IN_NONPAGED_AREA

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• Popravak pogreške 0x8007000e sprječavanja sigurnosnog kopiranja

• Popravi pogrešku alata za stvaranje medija 0x80042405-0xa001a

• Popravite pogrešku možda oštećene predmemorije Windows Store