Rezervirana pohrana^{(Reserved Storage)} je značajka u Windows 11/10 . Primarni cilj ove značajke je osigurati da Windows PC ne ostane bez prostora za pohranu kada dođe vrijeme za preuzimanje Windows 10 Update . Međutim, omogućio ga je samo proces postavljanja ^(Setup)sustava Windows 10^{(Windows 10)} za novu instalaciju ili kada vratite Windows na zadano. U ovom ćemo postu pokazati kako možete koristiti DISM naredbe da omogućite ili onemogućite rezerviranu pohranu^(Storage) u Windows 11/10 . Najbolji dio je što ga sada možete omogućiti ili onemogućiti na zahtjev, što znači da ne ovisi o procesu postavljanja sustava Windows^{(Windows Setup)} .

Počevši od ažuriranja ^(Update)sustava Windows 10^{(Windows 10)} v2004 iz svibnja 2020.^{(May 2020)} , Microsoft je svima olakšao saznanje o rezerviranoj pohrani u sustavu Windows 10^{(Windows 10)} dodavanjem dodatnih opcija u naredbi DISM .

Onemogućite ili omogućite rezerviranu pohranu pomoću DISM-a^(DISM)

Pogledajmo kako koristiti novi parametar ReservedStorageStat u naredbenom retku DISM koristeći ^(DISM)Command Prompt ili PowerShell za upravljanje rezerviranom pohranom^{(Reserved Storage)} u Windows 11/10 .

DISM ili Deployment Image Servicing and Management je alat naredbenog retka. Koristi se za montiranje i servis Windows slika. Također se može koristiti za rješavanje problema u operativnom sustavu koji radi. Koristite sljedeće korake za upravljanje rezerviranom pohranom u sustavu Windows^(Windows) .

Otvorite naredbeni redak^{(Command Prompt)} ili PowerShell s administratorskim dopuštenjem

Da biste omogućili Resverd Storage:

DISM.exe /Online /Set-ReservedStorageState /State:Enabled

Da biste onemogućili rezerviranu pohranu:

DISM.exe /Online /Set-ReservedStorageState /State:Disabled

Kada završite, da biste provjerili status značajke rezervirane pohrane^{(Reserved Storage)} , možete izvršiti:

DISM.exe /Online /Get-ReservedStorageState

Iako bi se promjene trebale primijeniti odmah, uvijek možete ponovno pokrenuti da provjerite je li omogućeno ili onemogućeno.

Ponekad možete dobiti DISM pogrešku 87^{(DISM error 87)} koja govori da opcija ne postoji. U tom slučaju morat ćete izvršiti naredbu DISM s opcijom cleanup-image, a zatim pokušati ponovno. Pogreška se također pojavljuje ako je u tijeku preuzimanje Windows 10 Update .

Konačno, naredba radi za online Windows slike^{(Windows Images)} ili na Windows 10 PC, ali ne i za offline slike. Također neće raditi ako je rezervirana pohrana u upotrebi i vratit će pogrešku:

This operation is not supported when reserved storage is in use. Please wait for any servicing operations to complete and then try again later.

Također je moguće omogućiti rezerviranu pohranu putem Registra^{(enable Reserved Storage via Registry)} i smanjiti veličinu ako želite.

Ako pokušate pokrenuti na bilo kojoj drugoj verziji, osim na Windows 10 v2004, pojavit će se pogreška koja kaže:

Error: 87. The set-reservedstoragestate option is unknown.

To će se dogoditi za opcije Set-ReservedStorageState i Get-ReservedStorageState .

Nadam se da je objavu bilo lako pratiti i da ste uspjeli onemogućiti ili omogućiti značajku rezervirane pohrane^{(Reserved Storage)} u sustavu Windows 10^{(Windows 10)} pomoću DISM naredbi.

Disable or Enable Reserved Storage using DISM command line

Reserved Storage is a feature in Windows 11/10. The primary goal of this feature is to make sure that Windows PC does not run out of storage space when it is time to download Windows 10 Update. However, it was only enabled by the Windows 10 Setup process either for new installation or when you reset Windows. In this post, we will show how you can use the DISM commands to enable or disable Reserved Storage in Windows 11/10. The best part is that you can now enable or disable it on demand which means it does not depend on the Windows Setup process.

Starting with Windows 10 v2004 May 2020 Update, Microsoft has made it easy for anyone to find out about Reserved Storage in Windows 10 by adding extra options in the DISM command.

Disable or Enable Reserved Storage using DISM

Let us see how to use the new ReservedStorageStat parameter in the DISM command-line using Command Prompt or PowerShell to manage Reserved Storage in Windows 11/10.

DISM or Deployment Image Servicing and Management is a command-line tool. It is used to mount and service Windows images. It can also be used to fix problems in a running operating system as well. Use the following steps to manage the reserved storage in Windows.

Open Command Prompt or PowerShell with admin permission

To enable Resverd Storage:

DISM.exe /Online /Set-ReservedStorageState /State:Enabled

To disable Reserved Storage:

DISM.exe /Online /Set-ReservedStorageState /State:Disabled

Once done, to check the status of the Reserved Storage feature, you can execute:

DISM.exe /Online /Get-ReservedStorageState

While the changes should apply instantly, you can always restart to check if it was enabled or disabled.

At times you may get a DISM error 87 saying that the option doesn’t exist. In that case, you will need to execute the DISM command with the cleanup-image option and then try again. The error also occurs if there is an ongoing Windows 10 Update downloading.

Lastly, the command works for online Windows Images or on Windows 10 PC but not on offline images. It will also not work if the reserved storage is in use, and will return an error:

This operation is not supported when reserved storage is in use. Please wait for any servicing operations to complete and then try again later.

It is also possible to enable Reserved Storage via Registry and reduce the size if you wish.

If you try to run on any other version, apart from Windows 10 v2004, it will throw an error saying:

Error: 87. The set-reservedstoragestate option is unknown.

It will happen for options Set-ReservedStorageState and Get-ReservedStorageState.

I hope the post was easy to follow, and you were able to disable or enable the Reserved Storage feature in Windows 10 using DISM commands.

Related posts

• Kako UVIJEK pokrenuti naredbeni redak i PowerShell kao administrator

• Kako vratiti PowerShell i naredbeni redak na zadane postavke

• Stvorite više mapa pomoću naredbenog retka i PowerShell-a

• Kako onemogućiti WiFi koristeći CMD ili Powershell u sustavu Windows 10

• Onemogućite pomicanje naprijed u CMD-u i PowerShell-u u sustavu Windows 10

• Kako stvoriti lažne datoteke velike veličine u sustavu Windows 10

• Izvršite aritmetičke operacije u naredbenom retku u sustavu Windows 11/10

• Kako pokrenuti naredbeni redak kao administrator u sustavu Windows 11/10

• Kako deinstalirati program pomoću naredbenog retka u sustavu Windows 11/10

• Preuzmite PDF Vodič za Windows Command Reference od Microsofta

• Naredbeni redak neće raditi kao administrator u sustavu Windows 11/10

• Kako urediti registar iz naredbenog retka u sustavu Windows 10

• Naredbeni redak (CMD) - 8 mrežnih naredbi koje biste trebali znati

• Upravljajte bežičnim mrežama pomoću naredbenog retka u sustavu Windows 11/10

• Vratite PowerShell i CMD na zadane postavke

• Popis tipkovničkih prečaca CMD ili naredbenog retka u sustavu Windows 11/10

• Kako promijeniti direktorij u CMD-u na Windows 10

• Stvorite račun lokalnog administratora u sustavu Windows 11/10 pomoću CMD-a

• Kako izvesti DDoS napad na web stranicu pomoću CMD-a

• Što su naredbe Tasklist i Taskkill u sustavu Windows 10?