Omogućite ili onemogućite način rada za razvojne programere u sustavu Windows 10: ^{(Enable or Disable Developer Mode in Windows 10: )} prije razvoja, instaliranja ili testiranja aplikacija u sustavu Windows^(Windows) , morate kupiti licencu za razvojne programere od Microsofta^(Microsoft) koju je trebalo obnavljati svakih 30 ili 90 dana, ali od uvođenja Windowsa 10^{(Windows 10)} više nema potrebe za licencu programera. Samo trebate omogućiti način rada za razvojne programere i možete početi instalirati ili testirati svoje aplikacije u sustavu Windows 10^{(Windows 10)} . Način rada za razvojne programere^(Developers) pomaže vam da testirate svoje aplikacije na greške i daljnja poboljšanja prije nego što ih pošaljete u Windows App Store .

Uvijek možete odabrati razinu sigurnosti svog uređaja pomoću ovih postavki:

Windows Store apps: This is the default settings which only let you install apps from the Window Store
Sideload apps: This means installing an app that has not been certified by the Windows Store, for example, an app that is internal to your company only.
Developer mode: Lets you test, debug, install your apps on your device and you can also Sideload apps.

Dakle, ako ste programer ili trebate testirati aplikaciju treće strane na svom uređaju, morate omogućiti način rada za razvojne programere^(Developer) u  sustavu Windows 10^{(Windows 10)} . Ali neki ljudi također moraju onemogućiti ovu značajku jer ne koriste svi način rada za razvojne programere, pa bez gubljenja vremena pogledajmo kako omogućiti ili onemogućiti način rada za razvojne programere^{(Disable Developer Mode)} u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča.

Omogućite ili onemogućite način rada razvojnog programera^{(Developer Mode)} u sustavu Windows 10^{(Windows 10)}

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Omogućite ili onemogućite način rada razvojnog programera u postavkama sustava Windows 10^{(Method 1: Enable or Disable Developer Mode in Windows 10 Settings)}

1. Pritisnite tipku Windows + I za otvaranje postavki^(Settings) , a zatim kliknite ikonu Ažuriraj i sigurnost.^{(Update & security icon.)}

2. Na lijevom izborniku svakako odaberite " Za razvojnog programera^{(For developer)} ".

3. Sada prema vašem izboru odaberite ili Windows Store aplikacije, Sideload aplikacije ili način rada razvojnog programera.^{( select either Windows Store apps, Sideload apps, or Developer mode.)}

4.Ako ste odabrali Sideload apps ili Developer mode^{( Sideload apps or Developer mode)} , kliknite Da^(Yes) za nastavak.

5. Kada završite, zatvorite Postavke i ponovno pokrenite računalo.

Metoda 2: Omogućite ili onemogućite način rada razvojnog programera u uređivaču registra^{(Method 2: Enable or Disable Developer Mode in Registry Editor)}

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra.^{( Registry Editor.)}

2. Idite do sljedećeg ključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\AppModelUnlock

3. Desnom tipkom miša kliknite AppModelUnlock , a zatim odaberite New > DWORD (32-bit) Value.

4. Imenujte ovaj novostvoreni DWORD kao AllowAllTrustedApps i pritisnite Enter.

5. Slično, stvorite novi DWORD s imenom AllowDevelopmentWithoutDevLicense.

6. Sada, ovisno o vašem izboru, postavite vrijednost gornjih ključeva registra kao:

Windows Store apps – Set the value of AllowAllTrustedApps and AllowDevelopmentWithoutDevLicense to 0
Sideload apps – Set the value of AllowAllTrustedApps to 1 and AllowDevelopmentWithoutDevLicense to 0
Developer mode – Set the value of AllowAllTrustedApps and AllowDevelopmentWithoutDevLicense to 1

7. Kada završite, zatvorite sve i ponovno pokrenite računalo.

Metoda 3: Omogućite ili onemogućite način rada razvojnog programera u uređivaču pravila grupe^{(Method 3: Enable or Disable Developer Mode in Group Policy Editor)}

1. Pritisnite tipku Windows + R zatim upišite gpedit.msc i pritisnite Enter.

2. Idite na sljedeći put:

Computer Configuration > Administrative Templates > Windows Components > App Package Deployment

3. Obavezno odaberite App Package Deployment , a zatim u desnom oknu prozora dvaput kliknite na politiku " Dopusti svim pouzdanim aplikacijama da instaliraju ^{(Allow all trusted apps to install)}" ​​i "Omogućuje razvoj aplikacija Windows Store i njihovo instaliranje iz integriranog razvojnog okruženja (IDE)^{( “Allows development of Windows Store apps and installing them from an integrated development environment (IDE))} ".

4. Da biste omogućili način rada za razvojne programere^{(Developer Mode)} u sustavu Windows 10^{(Windows 10)} , postavite gornja pravila na Omogućeno^(Enabled) , a zatim kliknite Primijeni^(Apply) , a zatim U redu.

Napomena: ^(Note:) Ako u budućnosti trebate onemogućiti način rada razvojnog programera u sustavu Windows 10, jednostavno postavite gornja pravila na Onemogućeno.^{(If in future you need to disable Developer Mode in Windows 10, then simply set the above policies to Disabled.)}

5. Ponovo pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Dopustite ili spriječite Windows 10 teme za promjenu ikona radne površine^{(Allow or Prevent Windows 10 Themes to Change Desktop Icons)}
• Omogućite opširne ili vrlo detaljne poruke o statusu u sustavu Windows 10^{(Enable Verbose or Highly Detailed Status Messages in Windows 10)}
• Spriječite korisnika da mijenja ikone na radnoj površini u sustavu Windows 10^{(Prevent User From Changing Desktop Icons in Windows 10)}
• Onemogućite smanjenje kvalitete pozadine radne površine JPEG u sustavu Windows 10^{(Disable Desktop Wallpaper JPEG Quality Reduction in Windows 10)}

To je to što ste uspješno naučili kako omogućiti ili onemogućiti način rada razvojnog programera u sustavu Windows 10^{(How to Enable or Disable Developer Mode in Windows 10)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Enable or Disable Developer Mode in Windows 10

Enable or Disable Developer Mode in Windows 10: Earlier to develop, install or test apps in Windows, you require to purchase developer license from Microsoft which needed renewing every 30 or 90 days but since the introduction of Windows 10, there is no longer need for the developer license. You just need to enable developer mode and you can start installing or testing your apps inside Windows 10. Developers mode helps you test your apps for bugs and further improvements before you submit it to the Windows App Store.

You could always choose the level of security of your device using these settings:

Windows Store apps: This is the default settings which only let you install apps from the Window Store
Sideload apps: This means installing an app that has not been certified by the Windows Store, for example, an app that is internal to your company only.
Developer mode: Lets you test, debug, install your apps on your device and you can also Sideload apps.

So if you’re a developer or you need to test a 3rd party app on your device then you need to enable Developer mode in  Windows 10. But some people also need to disable this feature as not everybody uses developer mode, so without wasting any time let’s see How to Enable or Disable Developer Mode in Windows 10 with the help of the below-listed tutorial.

Enable or Disable Developer Mode in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Enable or Disable Developer Mode in Windows 10 Settings

1.Press Windows Key + I to open Settings then click on Update & security icon.

2.From the left-hand menu make sure to select “For developer“.

3.Now according to your choice select either Windows Store apps, Sideload apps, or Developer mode.

4.If you selected Sideload apps or Developer mode then click on Yes to continue.

5.Once finished, close Settings and reboot your PC.

Method 2: Enable or Disable Developer Mode in Registry Editor

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\AppModelUnlock

3.Right-click on AppModelUnlock then select New > DWORD (32-bit) Value.

4.Name this newly created DWORD as AllowAllTrustedApps and hit Enter.

5.Similarly, create a new DWORD with the name AllowDevelopmentWithoutDevLicense.

6.Now depending on your choice set the value of the above registry keys as:

Windows Store apps – Set the value of AllowAllTrustedApps and AllowDevelopmentWithoutDevLicense to 0
Sideload apps – Set the value of AllowAllTrustedApps to 1 and AllowDevelopmentWithoutDevLicense to 0
Developer mode – Set the value of AllowAllTrustedApps and AllowDevelopmentWithoutDevLicense to 1

7.Once finished, close everything and restart your PC.

Method 3: Enable or Disable Developer Mode in Group Policy Editor

1.Press Windows Key + R then type gpedit.msc and hit Enter.

2.Navigate to the following path:

Computer Configuration > Administrative Templates > Windows Components > App Package Deployment

3.Make sure to select App Package Deployment then in right window pane double-click on “Allow all trusted apps to install” and “Allows development of Windows Store apps and installing them from an integrated development environment (IDE)” policy.

4.To Enable Developer Mode in Windows 10, set the above policies to Enabled and then click Apply followed by OK.

Note: If in future you need to disable Developer Mode in Windows 10, then simply set the above policies to Disabled.

5.Reboot your PC to save changes.

Recommended:

• Allow or Prevent Windows 10 Themes to Change Desktop Icons
• Enable Verbose or Highly Detailed Status Messages in Windows 10
• Prevent User From Changing Desktop Icons in Windows 10
• Disable Desktop Wallpaper JPEG Quality Reduction in Windows 10

That’s it you have successfully learned How to Enable or Disable Developer Mode in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Kako pokrenuti sustav u sigurnom načinu rada u sustavu Windows 10

• Način rada u zrakoplovu se ne isključuje u sustavu Windows 10 [RJEŠENO]

• Kako omogućiti AHCI način rada u sustavu Windows 10

• Kako dodati Safe Mode u izbornik za pokretanje u sustavu Windows 10

• Kako omogućiti ili onemogućiti Emoji ploču u sustavu Windows 10

• Kako potpuno deinstalirati McAfee iz Windows 10

• Pokazivač miša zaostaje u sustavu Windows 10 [RIJEŠENO]

• Pronađite sigurnosni identifikator (SID) korisnika u sustavu Windows 10

• Popravak VCRUNTIME140.dll nedostaje u sustavu Windows 10

• 3 načina za povećanje namjenskog VRAM-a u sustavu Windows 10

• Kako omogućiti Active Directory u sustavu Windows 10

• USB uređaj ne radi u sustavu Windows 10 [RIJEŠENO]

• Onemogućite dodirnu podlogu kada je miš povezan u sustavu Windows 10

• Kako pokrenuti JAR datoteke na Windows 10

• Kako popraviti oštećeni registar u sustavu Windows 10

• Kako onemogućiti vatrozid za Windows 10

• 2 načina za izlazak iz sigurnog načina rada u sustavu Windows 10

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Omogućite ili onemogućite Cortanu na zaključanom zaslonu sustava Windows 10