Popravak Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka: ^{(Fix There are no more endpoints available from the endpoint mapper: )} ako se suočavate s ovom pogreškom, to znači da ili pokušavate instalirati pisač ili dijelite svoj pogon unutar svoje mreže. Općenito^(Generally) , pogreška " Nema više^{(No More)} dostupnih krajnjih točaka" pojavljuje se kada se pokušate pridružiti domeni, ali su Windows usluge oštećene i stoga su u sukobu s drugim uslugama koje vam ne dopuštaju da se pridružite toj određenoj domeni i na kraju uzrokuje pogrešku. U svakom slučaju, ova je pogreška vrlo neugodna i zato je alat za rješavanje problema tu da ispravi ovu pogrešku putem sljedećih koraka za rješavanje problema.

Prilikom pokušaja pridruživanja klijenta domeni Active Directory, možete dobiti sljedeću pogrešku:

The following error occurred attempting to join the domain <domain>:
Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka. ^{(There are no more endpoints available from the endpoint mapper.)}
Pogreška 1753: Nema više dostupnih krajnjih točaka iz mapiranja krajnjih točaka.^{(Error 1753: There are no more endpoints available from the endpoint mapper.)}

Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka [RJEŠENO]

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Izbrišite internetski ključ da biste uklonili RPC ograničenje^{(Method 1: Delete the Internet key to remove RPC restriction)}

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet

3. Desnom tipkom miša kliknite internetski ključ^{(Internet key)} i odaberite Izbriši.^(Delete.)

4. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 2: Provjerite jesu li pokrenute usluge Remote Procedure Call (RPC).^{(Method 2: Verify that Remote Procedure Call (RPC) Services are Started)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Pronađite sljedeće usluge:

Poziv udaljenog postupka Poziv ^{(Remote Procedure Call )}
udaljenog postupka lokator poziva ^{(Remote Procedure Call Locator)}
ByProcessManager

Ako imate problema s dodavanjem pisača, provjerite rade li i sljedeće usluge:

Print Spooler
DCOM Server Process Launcher
RPC Endpoint Mapper

3. Desnom tipkom miša kliknite i odaberite Svojstva^{( Properties)} za gore navedene usluge.

4. Zatim provjerite je li tip pokretanja Automatski^{( Startup type is Automatic)} i da su usluge pokrenute.^{(services are running.)}

5. Ako su gore navedene usluge zaustavljene, svakako ih pokrenite^(Run) iz prozora svojstava.

6. Ponovo pokrenite računalo da biste spremili promjene i pogreška " Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka^{(There are no more endpoints available from the endpoint mapper)} " može biti riješena.

Metoda 3: Privremeno onemogućite  ^{(Method 3: Temporary Disable )}antivirusni  ^{(Antivirus )}i  ^(and )vatrozid^(Firewall)

Ponekad antivirusni^(Antivirus) program može uzrokovati "Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka"^{(“There are no more endpoints available from the endpoint mapper”)} i kako biste provjerili da to ovdje nije slučaj, morate onemogućiti antivirusni program na ograničeno vrijeme kako biste mogli provjeriti pojavljuje li se pogreška i dalje kada je antivirus isključen.

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno se pokušajte spojiti na WiFi mrežu i provjerite je li pogreška riješena ili ne.

4. Pritisnite tipku Windows + I, a zatim odaberite Upravljačka ploča.^{( Control Panel.)}

5.Sljedeće kliknite na Sustav i sigurnost.^{( System and Security.)}

6. Zatim kliknite na Windows vatrozid.^{(Windows Firewall.)}

7. Sada u lijevom oknu prozora kliknite na Uključi ili isključi Windows vatrozid .^{(Turn Windows Firewall)}

8. Odaberite Isključi Windows vatrozid i ponovno pokrenite računalo. ^{(Select Turn off Windows Firewall and restart your PC. )}Ponovno se pokušajte povezati s WiFi mrežom i provjerite je li problem riješen ili ne.

Ako gornja metoda ne radi, svakako slijedite iste korake kako biste ponovno uključili vatrozid.

Metoda 4: Pokrenite alat za rješavanje problema s ispisom^{(Method 4: Run Print Troubleshooter)}

1.Upišite "otklanjanje problema" u traku za pretraživanje sustava Windows^{(Windows Search)} i kliknite na Troubleshooting.

2. Dalje, u lijevom oknu prozora odaberite Prikaži sve.^{(View all.)}

3. Zatim s popisa Troubleshoot computer problems odaberite Printer.

4. Slijedite upute na zaslonu i pustite da se pokrene alat za rješavanje problema s pisačem^{(Printer Troubleshooter)} .

5. Ponovno pokrenite svoje računalo i pogreška " Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka^{(There are no more endpoints available from the endpoint mapper)} " može biti riješena.

Metoda 5: Promijenite napredne postavke dijeljenja^{(Method 5: Change advanced sharing settings)}

1. Desnom tipkom miša kliknite na ikonu bežične^(Wireless) veze na traci sustava i kliknite na Open Network and Sharing Center.

2. Kliknite Promjena naprednih postavki dijeljenja^{( Change advanced sharing settings)} u lijevom prozoru.

3. Omogućite Otkrivanje mreže^{(Network discovery)} , Dijeljenje datoteka i pisača i Javnu mapu.^{(Network discovery, File and printer sharing and Public folder.)}

4. Kliknite Spremi^(Save) promjene i zatvorite sve. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 6: Popravak registra za pogrešku dijeljenja^{(Method 6: Registry fix for Sharing error)}

1.Preuzmite datoteke MpsSvc.reg i BFE.reg . Dvaput kliknite^{(Double-click)} na njih za pokretanje i dodavanje ovih datoteka u registar.

2. Ponovno pokrenite računalo da biste spremili promjene.

3. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

4. Dalje, idite do sljedećeg ključa registra:

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE

5. Desnom tipkom kliknite BFE tipku i odaberite Dozvole.^{(select Permissions.)}

6. U sljedećem prozoru koji se otvori kliknite gumb Dodaj.^{(Add button.)}

7.Upišite “ Svi^(Everyone) ” (bez navodnika) ispod polja Unesite^(Enter) nazive objekata koje želite odabrati, a zatim kliknite na Provjeri imena.^{(Check Names.)}

8. Sada kada je ime potvrđeno, kliknite OK.

9. Sada bi svi trebali biti dodani u odjeljak Grupa ili korisnička imena.^{( Group or user names section.)}

10. Obavezno odaberite Svi^(Everyone) s popisa i označite opciju Potpuna kontrola^{( Full Control)} u stupcu Dopusti.

11. Kliknite Primijeni, a zatim OK.

12. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

13. Pronađite dolje navedene usluge i kliknite na njih desnom tipkom miša, a zatim odaberite Svojstva:^{(Properties:)}

^{(Filtering Engine)}Vatrozid sustava za ^{(Windows Firewall)}filtriranje sustava Windows

14. Omogućite ih oba u prozoru Svojstva^(Properties) (kliknite Start ) i provjerite je li njihova vrsta pokretanja^{(Startup type)} postavljena na Automatski.^(Automatic.)

15. To je to, možda imate  Popravak. Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka,^{(Fix There are no more endpoints available from the endpoint mapper)} ali ako ne, pokrenite SFC i CHKDSK u sljedećem koraku.

Metoda 7: Pokrenite provjeru sistemskih datoteka (SFC) i provjerite disk (CHKDSK)^{(Method 7: Run System File Checker (SFC) and Check Disk (CHKDSK))}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

4. Sljedeće pokrenite CHKDSK odavde  Popravi pogreške datotečnog sustava pomoću uslužnog programa za provjeru diska (CHKDSK)^{(Fix File System Errors with Check Disk Utility(CHKDSK))} .^{(Fix File System Errors with Check Disk Utility(CHKDSK).)}

5. Pustite da se gornji proces dovrši i ponovno pokrenite računalo da biste spremili promjene.

Metoda 8: Pokrenite DISM (servisiranje i upravljanje slikom za implementaciju)^{(Method 8: Run DISM (Deployment Image Servicing and Management))}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Unesite sljedeću naredbu u cmd i pritisnite enter:

Važno:^(Important:)  Kada koristite DISM, morate imati spreman Windows instalacijski medij .^{(Windows Installation Media)}

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows s lokacijom vašeg izvora popravka

2. Pritisnite enter da pokrenete gornju naredbu i pričekajte da se proces završi, obično traje 15-20 minuta.

NOTE: If the above command doesn't work then try on the below: 
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

3. Nakon što je DISM proces završen, upišite sljedeće u cmd i pritisnite Enter :  sfc /scannow

4. Pustite da se pokrene provjera datoteka sustava^{(System File Checker)} i nakon što završi, ponovno pokrenite računalo. Provjerite je li problem  usporenog isključivanja sustava Windows 10 riješen ili ne.^{( Windows 10 Slow Shutdown)}

Preporučeno za tebe:^{(Recommended for you:)}

• Popravite programske veze i ikone otvorite Word dokument^{(Fix Program links and icons open Word Document)}
• Kako popraviti da Internet Explorer 11 ne reagira^{(How to Fix Internet Explorer 11 Not Responding)}
• Popravi Datoteka je prevelika za odredišni datotečni sustav^{(Fix The file is too large for the destination file system)}
• Kako promijeniti vrijeme automatskog spremanja u Wordu^{(How to change Auto-save time in Word)}

To je to što ste uspješno popravili. Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka,^{(Fix There are no more endpoints available from the endpoint mapper)} ali ako još uvijek imate pitanja u vezi s ovom objavom, slobodno ih pitajte u odjeljku za komentare.

There are no more endpoints available from the endpoint mapper [SOLVED]

Fix There are no more endpoints available from the endpoint mapper: If you’re facing this error then this means either you are trying to install a printer or you’re sharing your drive within your network. Generally ‘No More Endpoints Available’ error occur when you try to join a domain but the Windows services are corrupted and therefore, conflicting with other services which won’t let you join that particular domain and ultimately causing the error. Anyway, this error is very annoying and that’s why troubleshooter is here to fix this error via the following troubleshooting steps.

When attempting to join a client to an Active Directory domain, you may receive the following error:

The following error occurred attempting to join the domain <domain>:
There are no more endpoints available from the endpoint mapper.
Error 1753: There are no more endpoints available from the endpoint mapper.

There are no more endpoints available from the endpoint mapper [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Delete the Internet key to remove RPC restriction

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet

3.Right-click on the Internet key and select Delete.

4.Reboot your PC to save changes.

Method 2: Verify that Remote Procedure Call (RPC) Services are Started

1.Press Windows Key + R then type services.msc and hit Enter.

2.Locate the following services:

Remote Procedure Call
Remote Procedure Call Locator
ByProcessManager

If you are trouble adding a printer then make sure following services are also running:

Print Spooler
DCOM Server Process Launcher
RPC Endpoint Mapper

3.Right-click and select Properties for above services.

4.Next, make sure the Startup type is Automatic and the services are running.

5.If the above services are stopped make sure to Run them from properties window.

6.Reboot your PC to save changes and the error “There are no more endpoints available from the endpoint mapper” may be resolved.

Method 3: Temporary Disable Antivirus and Firewall

Sometimes the Antivirus program can cause “There are no more endpoints available from the endpoint mapper” and in order to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to connect to the WiFi network and see if the issue is resolved or not.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 4: Run Print Troubleshooter

1.Type “troubleshooting” in Windows Search bar and click on Troubleshooting.

2.Next, from the left window pane select View all.

3.Then from the Troubleshoot computer problems list select Printer.

4.Follow on-screen instruction and let the Printer Troubleshooter run.

5.Restart your PC and the error “There are no more endpoints available from the endpoint mapper”  may be resolved.

Method 5: Change advanced sharing settings

1.Right-click on Wireless icon on system tray and click on Open Network and Sharing Center.

2.Click on Change advanced sharing settings in the left-hand window.

3.Enable the Network discovery, File and printer sharing and Public folder.

4.Click Save changes and close everything. Reboot your PC to save changes.

Method 6: Registry fix for Sharing error

1.Download MpsSvc.reg and BFE.reg files. Double-click on them to run and to add these files to the registry.

2.Reboot your PC to save changes.

3.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

4.Next, navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE

5.Right-click the BFE key and select Permissions.

6.In the next window that opens, click the Add button.

7.Type “Everyone” (without quotes) under the field Enter the object names to select and then click on Check Names.

8.Now once the name is verified click OK.

9.Everyone should be now added to the Group or user names section.

10.Make sure to select Everyone from the list and check mark Full Control option in Allow column.

11.Click Apply followed by OK.

12.Press Windows Key + R then type services.msc and hit Enter.

13.Find the below services and right-click on them then select Properties:

Filtering Engine
Windows Firewall

14.Enable them both in the Properties window (click on Start) and make sure their Startup type is set to Automatic.

15.That’s it you may have Fix There are no more endpoints available from the endpoint mapper but if not then run SFC and CHKDSK in the next step.

Method 7: Run System File Checker (SFC) and Check Disk (CHKDSK)

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

Method 8: Run DISM (Deployment Image Servicing and Management)

1.Press Windows Key + X then select Command Prompt(Admin).

2.Enter the following command in cmd and hit enter:

Important: When you DISM you need to have Windows Installation Media ready.

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source

2.Press enter to run the above command and wait for the process to complete, usually, it takes 15-20 minutes.

NOTE: If the above command doesn't work then try on the below: 
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

3.After the DISM process if complete, type the following in the cmd and hit Enter: sfc /scannow

4.Let System File Checker run and once it’s complete, restart your PC. Check if the Windows 10 Slow Shutdown problem is resolved or not.

Recommended for you:

• Fix Program links and icons open Word Document
• How to Fix Internet Explorer 11 Not Responding
• Fix The file is too large for the destination file system
• How to change Auto-save time in Word

That’s it you have successfully Fix There are no more endpoints available from the endpoint mapper but if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• USB uređaj ne radi u sustavu Windows 10 [RIJEŠENO]

• Pokazivač miša zaostaje u sustavu Windows 10 [RIJEŠENO]

• Upravljački program zaslona prestao je reagirati i oporavio je pogrešku [RJEŠENO]

• WiFi se stalno prekida u sustavu Windows 10 [RIJEŠENO]

• Windows 10 Creator Update ne uspijeva instalirati [RJEŠENO]

• Naziv direktorija je nevažeći pogreška [RJEŠENO]

• Prijavljeni ste s privremenom pogreškom profila [RJEŠENO]

• Hmm, ne možemo doći do pogreške ove stranice u Microsoft Edgeu [RJEŠENO]

• Windows se ne može povezati s pisačem [RIJEŠENO]

• Opcija Pin to Start Menu Nedostaje u Windows 10 [RJEŠENO]

• Pogreška NVIDIA Installer nije uspjela na Windows 10 [RJEŠENO]

• Pogreška 1962: Operativni sustav nije pronađen [RIJEŠENO]

• Touchpad ne radi u sustavu Windows 10 [RJEŠENO]

• Računalo se nasumično ponovno pokreće na Windows 10 [RJEŠENO]

• Popravak Windowsa nije mogao dovršiti instalaciju [RJEŠENO]

• Windows Explorer je prestao raditi [RIJEŠENO]

• Tipkovnica prijenosnog računala ne radi ispravno [RIJEŠENO]

• Aplikacija za fotografije se stalno ruši u sustavu Windows 10 [RIJEŠENO]

• Problem s upravljačkim programom Microsoft Virtual Wifi Miniport Adapter [RJEŠENO]

• Popravite upozorenje o smanjenoj memoriji vašeg računala [RJEŠENO]