Popravak Pogreška u nazivu direktorija nije važeća: ^{(Fix The directory name is invalid error: )} Korisnici prijavljuju da nakon čiste instalacije sustava Windows 10 ili čak nadogradnje na njega čini se da uzrokuje čudnu poruku o pogrešci "Naziv direktorija je nevažeći" kada umetnete disk u CD/DVD pogon. Sada se čini da CD/DVD pogon ne radi ispravno, ali ako odete na upravitelj uređaja vidjet ćete da je vaš MATSHITA DVD+-RW UJ8D1 uređaj instaliran i upravitelj uređaja izvještava da uređaj radi ispravno. Čak ni automatska instalacija najnovijih upravljačkih programa za vaš uređaj neće puno pomoći jer će reći da je upravljački program uređaja već instaliran.

So in order to troubleshoot this error remove the disc from the CD/DVD ROM and then try to click on the Drive which will return the message “Please insert a disc in drive F.” Now if you burn files to a new Disc and then try to use it then your disc will be immediately recognized by Windows but for any other disc it throws the error “The directory name is invalid.”

The main cause of this error seems to corrupted, outdated or incompatible device drivers but it can also be caused because of damaged or faulty SATA port. So without wasting any time let’s see how to actually Fix The directory name is invalid error with the below-listed troubleshooting guide.

The directory name is invalid error [SOLVED]

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Ažurirajte BIOS^{(Method 1: Update BIOS)}

Izvođenje ažuriranja BIOS -a kritičan je zadatak i ako nešto pođe po zlu može ozbiljno oštetiti vaš sustav, stoga se preporučuje stručni nadzor.

1. Prvi korak je identificirati svoju verziju BIOS- a, da biste to učinili pritisnite tipku  Windows Key + R , zatim upišite “ msinfo32 ” (bez navodnika) i pritisnite enter da otvorite informacije o sustavu^{(System Information)} .

2. Nakon što se otvori prozor s informacijama o sustavu^{( System Information)} , pronađite BIOS Version/Date zatim zabilježite proizvođača i verziju BIOS- a.

3. Sljedeće, idite na web-stranicu vašeg proizvođača, npr. u mom slučaju je to Dell , pa ću otići na web- stranicu Della^{(Dell website)} , a zatim ću unijeti serijski broj svog računala ili kliknuti na opciju automatskog otkrivanja.

4. Sada ću s prikazanog popisa upravljačkih programa kliknuti na BIOS i preuzeti preporučeno ažuriranje.

Napomena:^(Note:) Nemojte isključivati ​​svoje računalo i ne odspajati ga iz izvora napajanja tijekom ažuriranja BIOS -a jer biste mogli oštetiti svoje računalo. Tijekom ažuriranja, vaše će se računalo ponovno pokrenuti i nakratko ćete vidjeti crni ekran.

5. Nakon što se datoteka preuzme, samo dvaput kliknite na Exe datoteku da biste je pokrenuli.

6. Napokon ste ažurirali svoj BIOS i to bi također moglo popraviti grešku u nazivu direktorija.^{( Fix The directory name is invalid error.)}

Metoda 2: Promijenite SATA port^{(Method 2: Change SATA Port)}

Ako se i dalje pojavljuje pogreška "Naziv direktorija je nevažeći" onda je moguće da je SATA port neispravan ili oštećen. U svakom slučaju, promjena SATA priključka u koji je priključen vaš CD/DVD pogon čini se da u mnogim slučajevima rješava ovu pogrešku. Da biste to učinili, morat ćete otvoriti PC/Laptop Case što može biti prilično opasno ako ne znate što radite, onda biste mogli pokvariti svoj sustav, pa se preporučuje stručni nadzor.

Metoda 3: Onemogućite i zatim ponovno omogućite DVD pogon^{(Method 3: Disable and then Re-Enable the DVD drive)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite DVD/CD-ROM pogone, a zatim desnom tipkom miša kliknite svoj DVD pogon i odaberite Onemogući.^(Disable.)

3. Sada kada je uređaj ponovno onemogućen, kliknite ga desnom tipkom miša i odaberite Omogući.^(Enable.)

4. Ponovo pokrenite računalo i provjerite jeste li uspjeli popraviti pogrešku Ime direktorija je nevažeće.^{( Fix The directory name is invalid error.)}

Metoda 4: Izbrišite sve prijenosne uređaje^{(Method 4: Delete all Portable Devices)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja.^{(Device Manager.)}

2.Kliknite Prikaz^(View) , a zatim odaberite Prikaži skrivene uređaje.^{(Show hidden devices.)}

3.Proširite Prijenosni uređaji^{(Portable Devices)} , a zatim desnom tipkom miša kliknite sve prijenosne uređaje jedan po jedan i odaberite Delete.

4. Obavezno izbrišite sve uređaje navedene pod Prijenosni uređaji.

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 5: Deinstalirajte upravljačke programe DVD pogona^{(Method 5: Uninstall the DVD drive drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter.

2.Proširite DVD/CD-ROM pogone, a zatim desnom tipkom miša kliknite svoj DVD pogon i odaberite Deinstaliraj.^(Uninstall.)

3. Ako se traži potvrda, odaberite Yes/Continue.

4. Ponovno pokrenite računalo i upravljački programi će se automatski instalirati.

Provjerite jeste li u mogućnosti to  popraviti. Ime direktorija je nevažeća pogreška^{(Fix The directory name is invalid error)} , ako ne, nastavite sa sljedećom metodom.

Method 6: Change the drive letter of CD/DVD Drive

1. Pritisnite Windows Key + X , a zatim odaberite Upravljanje diskom.^{(Disk Management.)}

2. Pronađite svoj CD/DVD pogon na popisu koji bi bio napisan kao CD ROM 0/DVD drive.

3. Desni klik na njega i odaberite Promijeni slovo pogona i putove.^{(Change Drive Letter and Paths.)}

4. Sada u sljedećem prozoru kliknite na Change button.

5. Sada promijenite slovo Drive u bilo koje drugo slovo^{(change the Drive letter to any other letter)} iz padajućeg izbornika.

6. Kliknite OK i zatvorite prozor Upravljanje diskom .^{(Disk Management)}

7. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravak Trebat će vam nova aplikacija da biste ovo otvorili – ms-windows-store^{(Fix You’ll need a new app to open this – ms-windows-store)}
• Popravi pogrešku Proxy poslužitelj ne reagira^{(Fix The proxy server isn’t responding error)}
• Kako popraviti nedostatak Windows trgovine u sustavu Windows 10^{(How To Fix Windows Store missing in Windows 10)}
• Popravi Windows ne može pristupiti navedenom uređaju, putu ili grešci datoteke^{(Fix Windows cannot access the specified device, path, or file error)}

To je to što ste uspješno popravili Ime direktorija je nevažeća pogreška [RJEŠENO],^{(Fix The directory name is invalid error [SOLVED])} ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

The directory name is invalid error [SOLVED]

Fix The directory name is invalid error: Users are reporting that after a clean install of Windows 10 or even upgrading to it seems to cause a strange error message “The directory name is invalid” when you insert a disc in CD/DVD drive. Now it seems like the CD/DVD drive is not working properly but if you go to the device manager you will see that your MATSHITA DVD+-RW UJ8D1 device is installed and device manager reports that the device is working properly. Even automatically installing the latest drivers for your device won’t help much as it will say that the device driver is already installed.

So in order to troubleshoot this error remove the disc from the CD/DVD ROM and then try to click on the Drive which will return the message “Please insert a disc in drive F.” Now if you burn files to a new Disc and then try to use it then your disc will be immediately recognized by Windows but for any other disc it throws the error “The directory name is invalid.”

The main cause of this error seems to corrupted, outdated or incompatible device drivers but it can also be caused because of damaged or faulty SATA port. So without wasting any time let’s see how to actually Fix The directory name is invalid error with the below-listed troubleshooting guide.

The directory name is invalid error [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Update BIOS

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may also Fix The directory name is invalid error.

Method 2: Change SATA Port

If you are still experiencing the “The directory name is invalid” error then it’s possible that the SATA port might be faulty or damaged. In any case, changing the SATA port in which your CD/DVD drive is plugged into seems to resolve this error in many cases. In order to do this, you will need to open your PC/Laptop Case which can be quite dangerous if you don’t know what you are doing then you might mess up your system, so a professional supervision is recommended.

Method 3: Disable and then Re-Enable the DVD drive

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand DVD/CD-ROM drives then right-click on your DVD drive and select Disable.

3.Now once the device is disabled again right-click on it and select Enable.

4.Reboot your PC and see if you were able to Fix The directory name is invalid error.

Method 4: Delete all Portable Devices

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Click View then select Show hidden devices.

3.Expand Portable Devices then right-click on all Portable Devices one by one and select delete.

4.Make sure to delete all the device listed under Portable Devices.

5.Reboot your PC to save changes.

Method 5: Uninstall the DVD drive drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

2.Expand DVD/CD-ROM drives then right-click on your DVD drive and select Uninstall.

3.If asked for confirmation select Yes/Continue.

4.Reboot your PC and the drivers will be automatically installed.

See if you are able to Fix The directory name is invalid error, if not then continue with the next method.

Method 6: Change the drive letter of CD/DVD Drive

1.Press Windows Key + X then select Disk Management.

2.Locate your CD/DVD drive in the list which would be written as CD ROM 0/DVD drive.

3.Right click on it and select Change Drive Letter and Paths.

4.Now in the next window click on Change button.

5.Now change the Drive letter to any other letter from the drop-down.

6.Click OK and close the Disk Management window.

7.Reboot your PC to save changes.

Recommended for you:

• Fix You’ll need a new app to open this – ms-windows-store
• Fix The proxy server isn’t responding error
• How To Fix Windows Store missing in Windows 10
• Fix Windows cannot access the specified device, path, or file error

That’s it you have successfully Fix The directory name is invalid error [SOLVED] but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• USB uređaj ne radi u sustavu Windows 10 [RIJEŠENO]

• Pokazivač miša zaostaje u sustavu Windows 10 [RIJEŠENO]

• Upravljački program zaslona prestao je reagirati i oporavio je pogrešku [RJEŠENO]

• WiFi se stalno prekida u sustavu Windows 10 [RIJEŠENO]

• Windows 10 Creator Update ne uspijeva instalirati [RJEŠENO]

• Datoteka je prevelika za odredišni datotečni sustav [RJEŠENO]

• Windows 10 zamrzava pri pokretanju [RIJEŠENO]

• Popravak koji Ethernet ne radi u sustavu Windows 10 [RIJEŠENO]

• Došlo je do pogreške čitanja diska [RJEŠENO]

• Zadani pisač se stalno mijenja [RJEŠENO]

• Pogreška oštećenja baze podataka Windows Update [RJEŠENO]

• Popravak Windowsa nije mogao dovršiti instalaciju [RJEŠENO]

• Nema više dostupnih krajnjih točaka iz mapera krajnjih točaka [RJEŠENO]

• Računalo se nasumično ponovno pokreće na Windows 10 [RJEŠENO]

• Windows se ne može povezati s pisačem [RIJEŠENO]

• Instalacija Windows 10 Creators Update zapela [RJEŠENO]

• Aplikacija za fotografije se stalno ruši u sustavu Windows 10 [RIJEŠENO]

• Nvidia Kernel Mode Driver prestao je reagirati [RIJEŠENO]

• Numerička tipkovnica ne radi u sustavu Windows 10 [RJEŠENO]

• Prijavljeni ste s privremenom pogreškom profila [RJEŠENO]