Kad god spojite vanjski pogon kao što je vanjski tvrdi disk ili USB olovka, Windows automatski dodjeljuje slovo pogona spojenom pogonu. Proces dodjeljivanja slova pogona prilično je jednostavan jer Windows napreduje kroz abecedu od A do Z kako bi spojenom uređaju dodijelio dostupna slova pogona. Ali postoje neka slova koja su iznimke, kao što su A i B rezervirana za diskete, dok se slovo pogona C može koristiti samo za pogon na kojem je instaliran Windows . U svakom slučaju^(Anyway) , bez gubljenja vremena, pogledajmo kako ukloniti ili sakriti slovo diska^{(Hide Drive Letter)} u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča.

Kako ukloniti ili sakriti slovo pogona^{(Hide Drive Letter)} u sustavu Windows 10^{(Windows 10)}

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Kako ukloniti slovo pogona u Upravljanju diskovima^{(Method 1: How to Remove Drive Letter in Disk Management)}

1. Pritisnite tipku Windows + R zatim upišite diskmgmt.msc i pritisnite Enter da otvorite Upravljanje diskom.^{( Disk Management.)}

2. Desnom tipkom miša kliknite pogon^(drive) za koji želite ukloniti slovo pogona i odaberite Promjena slova pogona i staza.^{(Change Drive Letter and Paths.)}

3. Odaberite slovo pogona^{(drive letter)} za određeni pogon i kliknite gumb Ukloni.^{(Remove button.)}

4. Kliknite Da^(Yes) da biste potvrdili svoje radnje, a zatim zatvorite sve.

Metoda 2: Kako sakriti slova pogona u File Exploreru^{(Method 2: How to Hide Drive Letters in File Explorer)}

1. Pritisnite tipku Windows Key + E da otvorite File Explorer , a zatim odaberite ovo računalo^{(select this PC)} s lijevog prozora .

2. Sada na izborniku vrpce kliknite na Pogled,^{( View,)} a zatim kliknite na Opcije.^(Options.)

3. Zatim se prebacite na karticu Prikaz^(View) , a zatim poništite opciju^(uncheck) " Prikaži slovo pogona^{(Show drive letter)} ".

4. Kliknite Primijeni, a zatim OK.

Metoda 3: Kako ukloniti slovo pogona u naredbenom retku^{(Method 3: How to Remove Drive Letter in Command Prompt)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu u cmd i pritisnite Enter nakon svake:

diskpart
list volumen^{(list volume)} (Zabilježite broj volumena za koji želite promijeniti slovo pogona)
select volume # (Zamijenite # brojem koji ste zabilježili gore)
remove letter=drive_letter ( Zamijenite^(Replace) slovo_drivea stvarnim slovom pogona koje ste želite koristiti na primjer: uklonite slovo=H)

3. Kada završite, možete zatvoriti naredbeni redak.

Metoda 4: Kako sakriti slova pogona pomoću uređivača registra^{(Method 4: How to Hide Drive Letters using Registry Editor)}

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

3. Desnom tipkom miša kliknite Explorer , a zatim odaberite New > DWORD (32-bit) Value i nazovite ovaj DWORD kao ShowDriveLettersFirst.

4. Dvaput kliknite na ShowDriveLettersFirst DWORD i promijenite njegovu vrijednost prema:

0 = Show drive letters
2 = Hide drive letters

5. Kliknite OK , a zatim zatvorite Registry Editor.

Preporučeno:^{(Recommended:)}

• 3 načina za promjenu slova pogona u sustavu Windows 10^{(3 Ways to Change Drive Letter in Windows 10)}
• Kako dodati Let's Encrypt SSL na MaxCDN prilagođenu domenu^{(How to Add Let’s Encrypt SSL to MaxCDN Custom Domain)}
• Popravite traku zadataka Windows 10 koja se ne skriva^{(Fix Windows 10 Taskbar Not Hiding)}
• Kako promijeniti ikonu pogona u sustavu Windows 10^{(How to Change Drive Icon in Windows 10)}

To je to što ste uspješno naučili kako ukloniti ili sakriti slovo pogona u sustavu Windows 10^{(How to Remove or Hide Drive Letter in Windows 10)} , ali ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

How to Remove or Hide Drive Letter in Windows 10

Whenever you connect an external drive suсh as external hard disk or USB pen drive, Windows automatically assigns a drive letter to the connected drive. The process of assigning a drive letter is quite simple as Windows progresses through the alphabet from A to Z to assign the available drive lеtters to the connected device. But there are some letters which are exceptions sυch as A & B are reserved for floppy drives, whereas the drive letter C can only be used for the drive whіch has Windows іnstalled on it. Anyway, wіthout wаsting any time, let’s see How to Remove or Hidе Drive Letter in Windows 10 with the help of the belоw-listed tutorial.

How to Remove or Hide Drive Letter in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: How to Remove Drive Letter in Disk Management

1. Press Windows Key + R then type diskmgmt.msc and hit Enter to open Disk Management.

2. Right-click on the drive for which you want to remove the drive letter and select Change Drive Letter and Paths.

3. Select the drive letter for the particular drive and click on Remove button.

4. Click Yes to confirm your actions, then close everything.

Method 2: How to Hide Drive Letters in File Explorer

1. Press Windows Key + E to open File Explorer then select this PC from the left-hand window.

2. Now from the ribbon menu, click on View, then click on Options.

3. Next, switch to the View tab then uncheck “Show drive letter“.

4. Click Apply, followed by OK.

Method 3: How to Remove Drive Letter in Command Prompt

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter after each one:

diskpart
list volume (Note down the number of the volume for which you want to change the drive letter for)
select volume # (Replace the # with the number which you noted above)
remove letter=drive_letter (Replace drive_letter with actual drive letter which you want to use for example: remove letter=H)

3. Once finished, you can close the command prompt.

Method 4: How to Hide Drive Letters using Registry Editor

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2. Navigate to the following registry key:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

3. Right-click on Explorer then select New > DWORD (32-bit) Value and name this DWORD as ShowDriveLettersFirst.

4. Double-click on the ShowDriveLettersFirst DWORD and change its value according to:

0 = Show drive letters
2 = Hide drive letters

5. Click OK then close the Registry Editor.

Recommended:

• 3 Ways to Change Drive Letter in Windows 10
• How to Add Let’s Encrypt SSL to MaxCDN Custom Domain
• Fix Windows 10 Taskbar Not Hiding
• How to Change Drive Icon in Windows 10

That’s it you have successfully learned How to Remove or Hide Drive Letter in Windows 10 but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 3 načina za promjenu slova pogona u sustavu Windows 10

• Kako izbrisati particiju volumena ili diska u sustavu Windows 10

• Sakrij stavke s upravljačke ploče u sustavu Windows 10

• Kako promijeniti ikonu pogona u sustavu Windows 10

• Prikaži ili sakrij sukobe spajanja mapa u sustavu Windows 10

• Jednostavan pregled aktivnosti Chromea na vremenskoj traci sustava Windows 10

• Odgodi ažuriranja značajki i kvalitete u sustavu Windows 10

• Onemogućite značajku zumiranja prstiju u sustavu Windows 10

• Kako koristiti zaključavanje tipke Fn u sustavu Windows 10

• Pokazivač miša zaostaje u sustavu Windows 10 [RIJEŠENO]

• 3 načina za dodavanje slike albuma u MP3 u sustavu Windows 10

• Kako formatirati tvrdi disk na Windows 10

• Promjena predloška pogona, mape ili biblioteke u sustavu Windows 10

• Kako sakriti disk u sustavu Windows 10

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Kako formatirati disk ili pogon u sustavu Windows 10

• Popravite kako se tvrdi disk ne pojavljuje u sustavu Windows 10

• Kako omogućiti ili onemogućiti Emoji ploču u sustavu Windows 10

• Kako popraviti skaliranje za zamućene aplikacije u sustavu Windows 10

• Pronađite sigurnosni identifikator (SID) korisnika u sustavu Windows 10