Ispravite pogrešku pri instalaciji koja nije uspjela u prvoj fazi pokretanja: ^{(Fix The Installation Failed In The First Boot Phase Error: )} Ako nadograđujete na Windows 10 ili nadograđujete na novo veliko ažuriranje od Microsofta^(Microsoft) , velika je vjerojatnost da će instalacija uspjeti i da će vam ostati poruka o pogrešci koja kaže "Mogli bismo" Nemojte instalirati Windows 10. « Ako dobro pogledate, na dnu ćete pronaći neke dodatne informacije koje bi bile šifra pogreške 0xC1900101 – 0x30018 ili 0x80070004 – 0x3000D ovisno o vrsti pogreške. Dakle, ovo su sljedeće pogreške koje možete dobiti:

0x80070004 – 0x3000D
Instalacija nije uspjela u fazi FIRST_BOOT s greškom tijekom MIGRATE_DATE operacije.

0xC1900101 – 0x30018
Instalacija nije uspjela u fazi FIRST_BOOT s greškom tijekom SYSPREP operacije.

0xC1900101-0x30017
Instalacija nije uspjela u fazi FIRST_BOOT s greškom tijekom BOOT operacije.

Sada su sve gore navedene pogreške uzrokovane ili zbog netočne konfiguracije registra ili zbog sukoba upravljačkih programa uređaja. Ponekad softver treće strane također može uzrokovati gore navedene pogreške, stoga moramo riješiti problem i otkloniti uzrok kako bismo riješili ovu pogrešku. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti pogrešku pri instalaciji^{(Installation)} koja nije uspjela u prvoj fazi pokretanja^{(First Boot Phase Error)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Ispravite pogrešku pri instalaciji^{(Installation)} koja nije uspjela u prvoj fazi pokretanja^{(First Boot Phase Error)}

Obavezno  stvorite točku vraćanja^{(create a restore point)} u slučaju da nešto pođe po zlu.

Napomena: ^(Note:) Obavezno^(Make) odspojite sve vanjske uređaje spojene na računalo.

Metoda 1: Privremeno onemogućite antivirusni i vatrozid^{(Method 1: Temporarily Disable Antivirus and Firewall)}

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno se pokušajte spojiti na WiFi mrežu i provjerite je li pogreška riješena ili ne.

4. Pritisnite tipku Windows + I, a zatim odaberite Upravljačka ploča.^{( Control Panel.)}

5.Sljedeće kliknite na Sustav i sigurnost.^{( System and Security.)}

6. Zatim kliknite na Windows vatrozid.^{(Windows Firewall.)}

7. Sada u lijevom oknu prozora kliknite na Uključi ili isključi Windows vatrozid .^{(Turn Windows Firewall)}

8. Odaberite Isključi Windows vatrozid i ponovno pokrenite računalo. ^{(Select Turn off Windows Firewall and restart your PC. )}Ponovno pokušajte otvoriti Google Chrome i provjerite možete li popraviti pogrešku pri  instalaciji koja nije uspjela u prvoj fazi pokretanja.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Ako gornja metoda ne radi, svakako slijedite iste korake kako biste ponovno uključili vatrozid.

Metoda 2: Provjerite ima li Windows Update^{(Method 2: Check for Windows Update)}

1. Pritisnite Windows Key + I, a zatim odaberite  Ažuriranje i sigurnost.^{(Update & Security.)}

2. Dalje, ponovno kliknite  Provjerite ima li ažuriranja^{(Check for updates)}  i provjerite jeste li instalirali sva ažuriranja na čekanju.

3. Nakon što su ažuriranja instalirana, ponovno pokrenite svoje računalo i provjerite jeste li u mogućnosti  popraviti pogrešku pri instalaciji koja nije uspjela u prvoj fazi pokretanja.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Metoda 3: Pokrenite službeni alat za rješavanje problema ažuriranja sustava Windows^{(Method 3: Run Official Windows Update Troubleshooter)}

Ako ništa ne radi do sada, svakako biste trebali pokušati pokrenuti Windows Update Troubleshooter sa samog Microsoftovog ^{(Windows Update Troubleshooter from Microsoft)} web^(Website) -mjesta i vidjeti jeste li u mogućnosti popraviti pogrešku pri instalaciji^{(Installation)} koja nije uspjela u prvoj fazi pokretanja^{(First Boot Phase Error)} .

Metoda 4: Pokrenite Windows Update u čistom pokretanju^{(Method 4: Run Windows Update in Clean Boot)}

Time bi se osiguralo da ako je bilo koja aplikacija treće strane u sukobu s ažuriranjem sustava Windows^(Windows) , tada ćete moći uspješno instalirati ažuriranja sustava Windows^{(Windows Updates)} unutar Clean Boot . Ponekad softver treće strane može biti u sukobu s Windows Update i stoga uzrokovati zastoj Windows ^{(Windows Update)}Update^(Stuck) . Kako biste ispravili pogrešku pri instalaciji koja nije uspjela u prvoj fazi pokretanja^{(Fix The Installation Failed In The First Boot Phase Error)} , morate izvršiti čisto podizanje sustava^{(perform a clean boot)} na računalu i dijagnosticirati problem korak po korak.

Metoda 5: Provjerite imate li dovoljno prostora na disku^{(Method 5: Make sure you have enough Disc Space)}

Za uspješnu instalaciju ažuriranja/nadogradnje sustava Windows^(Windows) trebat će vam najmanje 20 GB slobodnog prostora na tvrdom disku. Nije vjerojatno da će ažuriranje zauzeti sav prostor, ali je dobra ideja osloboditi najmanje 20 GB prostora na pogonu sustava kako bi se instalacija dovršila bez ikakvih problema.

Metoda 6: Preimenujte mapu SoftwareDistribution^{(Method 6: Rename SoftwareDistribution Folder)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Sada upišite sljedeće naredbe da zaustavite Windows Update Services , a zatim pritisnite Enter nakon svake:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Zatim upišite sljedeću naredbu za preimenovanje SoftwareDistribution Folder i zatim pritisnite Enter :

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4. Konačno, upišite sljedeću naredbu za pokretanje Windows Update Services i pritisnite Enter nakon svake:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Ponovo pokrenite računalo da biste spremili promjene.

Metoda 7: popravak registra^{(Method 7: Registry Fix)}

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade

3. Ako ne pronađete OSUpgrade ključ, kliknite desnom tipkom miša na WindowsUpdate i odaberite New > Key.

4. Imenujte ovaj ključ kao OSUpgrade i pritisnite Enter.

5. Sada provjerite jeste li odabrali OSUpgrade , a zatim u desnom oknu prozora kliknite desnom tipkom bilo gdje u praznom području i odaberite New > DWORD (32-bit) value.

6. Imenujte ovaj ključ kao AllowOSUpgrade i dvaput kliknite na njega da promijenite njegovu vrijednost u 1.

7. Ponovno pokušajte instalirati ažuriranja ili ponovno pokrenite proces nadogradnje i provjerite jeste li u mogućnosti ispraviti pogrešku pri instalaciji^{(Installation)} koja nije uspjela u prvoj fazi pokretanja^{(First Boot Phase Error)} .

Metoda 8: Izbrišite određenu datoteku koja se petlja s nadogradnjom^{(Method 8: Delete a particular file messing with upgrade)}

1. Idite do sljedećeg imenika:

C:\Users\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Orbx

Napomena: Da biste vidjeli mapu AppData , morate označiti kvačicu prikaži skrivene datoteke i mape u opcijama mape^{(Folder Options)} .

2. Alternativno, možete pritisnuti tipku Windows Key + R zatim upisati %appdata%\Microsoft\Windows\Start Menu\Programs\Orbx i pritisnuti Enter da izravno otvorite mapu AppData .

3. Sada u mapi Orbx pronađite datoteku pod nazivom Todo , ako datoteka postoji, svakako je trajno izbrišite.

4. Ponovno pokrenite računalo i ponovno pokušajte s procesom nadogradnje.

Metoda 9: Ažurirajte BIOS^{(Method 9: Update BIOS)}

Izvođenje ažuriranja BIOS -a kritičan je zadatak i ako nešto pođe po zlu može ozbiljno oštetiti vaš sustav, stoga se preporučuje stručni nadzor.

1. Prvi korak je identificirati svoju verziju BIOS- a, da biste to učinili pritisnite tipku  Windows Key + R , a zatim upišite " msinfo32 " (bez navodnika) i pritisnite enter da otvorite informacije o sustavu^{(System Information)} .

2. Nakon što se otvori prozor s informacijama o sustavu^{( System Information)} , pronađite BIOS Version/Date zatim zabilježite proizvođača i verziju BIOS- a.

3. Sljedeće, idite na web-stranicu vašeg proizvođača, npr. u mom slučaju to je Dell pa ću otići na web-mjesto tvrtke Dell^{(Dell website)} , a zatim ću unijeti serijski broj svog računala ili kliknuti na opciju automatskog otkrivanja.

4. Sada ću s prikazanog popisa upravljačkih programa kliknuti na BIOS i preuzeti preporučeno ažuriranje.

Napomena:^(Note:) Nemojte isključivati ​​svoje računalo i ne odspajati ga iz izvora napajanja tijekom ažuriranja BIOS -a jer biste mogli oštetiti svoje računalo. Tijekom ažuriranja, vaše će se računalo ponovno pokrenuti i nakratko ćete vidjeti crni ekran.

5. Nakon što se datoteka preuzme, samo dvaput kliknite na Exe datoteku da biste je pokrenuli.

6. Konačno, ažurirali ste svoj BIOS , a to bi također moglo  popraviti pogrešku pri instalaciji koja nije uspjela u prvoj fazi pokretanja.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Metoda 10: Onemogućite sigurno pokretanje^{(Method 10: Disable Secure Boot)}

1. Ponovno pokrenite računalo.

2. Prilikom ponovnog pokretanja sustava Uđite^(Enter) u BIOS postavke^{(BIOS setup)} pritiskom na tipku tijekom slijeda pokretanja.

3. Pronađite postavku Secure Boot i, ako je moguće, postavite je na Omogućeno^(Enabled) . Ova se opcija obično nalazi na kartici Sigurnost^(Security) , kartici Boot ili kartici Authentication .

#WARNING: Nakon onemogućavanja Sigurnog pokretanja^{(Secure Boot)} može biti teško ponovno aktivirati Secure Boot bez vraćanja računala u tvorničko stanje.

4. Ponovo pokrenite svoje računalo i provjerite jeste li u mogućnosti  popraviti pogrešku pri instalaciji koja nije uspjela u prvoj fazi pokretanja.^{(Fix The Installation Failed In The First Boot Phase Error.)}

5. Ponovno omogućite opciju Secure Boot^{(Enable the Secure Boot)} iz BIOS postavki.

Metoda 11: Pokrenite CCleaner i Malwarebytes^{(Method 11: Run CCleaner and Malwarebytes)}

1.Preuzmite i instalirajte  CCleaner &  Malwarebytes.

2. Pokrenite Malwarebytes^{(Run Malwarebytes)(Run Malwarebytes)} Â i pustite ga da skenira vaš sustav u potrazi za štetnim datotekama.

3. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

4. Sada pokrenite  CCleaner^( CCleaner)  i u odjeljku “Cleanerâ€, na kartici Windows , predlažemo da provjerite sljedeće odabire za čišćenje:

5. Nakon što ste se uvjerili da su odgovarajuće točke provjerene, jednostavno kliknite  Run Cleaner,  i pustite CCleaner da radi svojim tijekom.

6. Za dodatno čišćenje sustava odaberite karticu Registry i provjerite je li označeno sljedeće:

7. Odaberite Skeniraj^(Scan) za problem^(Issue) i dopustite CCleaner -u da skenira, a zatim kliknite  Popravi odabrane probleme.^{(Fix Selected Issues.)}

8.Kada CCleaner pita " Želite li sigurnosne kopije promjena u registru?" ^{(Do you want backup changes to the registry?)}†odaberite Da.

9. Nakon što je sigurnosno kopiranje dovršeno, odaberite Popravi sve odabrane probleme^{(Fix All Selected Issues)} .

10.Restart your PC to save changes and this would Fix The Installation Failed In The First Boot Phase Error, if not then continue with the next method.

Method 12: Run System File Checker and DISM Tool

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena:^(Note:)   Zamijenite^(Replace) C:\RepairSource\Windows s lokacijom izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

7. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 13: Rješavanje problema^{(Method 13: Troubleshooting)}

1. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Upišite sljedeću naredbu u cmd kao što je (kopirajte je i zalijepite) i pritisnite Enter nakon svake:

takeown /f C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log
icacls C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log /reset /T
notepad C:\$Windows.~BT\Sources\Panther\setuperr.log

3. Sada idite do sljedećeg direktorija:

C:\$Windows.~BT\Sources\Panther

Napomena: Morate označiti " Prikaži skrivene datoteke i mape^{(Show hidden files and folders)} " i poništiti opciju " Sakrij datoteke operativnog sustava^{(Hide operating system files)} " u opcijama ^(Options)mape^(Folder) kako biste vidjeli gornju mapu.

4. Dvaput kliknite na datoteku setuperr.log , kako biste je otvorili.

5. Datoteka pogreške imat će sljedeće informacije:

2017-07-07 13:24:01, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadRegFromFile :: OpenFile error (C:\$WINDOWS.~BT\Work\MachineIndependent\Working\srcworking\agentmgr\CCSIAgent\005A4BDD\HKLM-E0xxxx04IME.reg) gle=2
2017-07-07 13:24:07, Error SP Error WRITE, 0x00000005 while gathering/applying object: File, C:\Windows\System32\Tasks [avast! Emergency Update]. Will return 0[gle=0x00000005]
2017-07-07 13:24:07, Error MIG Error 5 while applying object C:\Windows\System32\Tasks\avast! Emergency Update. Shell application requested abort[gle=0x00000005]
2017-07-07 13:24:07, Error [0x08097b] MIG Abandoning apply due to error for object: C:\Windows\System32\Tasks\avast! Emergency Update[gle=0x00000005]
2017-07-07 13:24:08, Error Apply failed. Last error: 0x00000000
2017-07-07 13:24:08, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C
2017-07-07 13:24:09, Error SP Apply: Migration phase failed. Result: 44
2017-07-07 13:24:09, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed.[gle=0x000000b7]
2017-07-07 13:24:09, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]



2017-07-07 17:24:01, Error [SetupHost.Exe] ReAgentXMLParser::ParseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Drivers of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.GDRs of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Langpacks of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.FeaturesOnDemand of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-08 13:30:12, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2017-07-08 13:30:19, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2017-07-08 13:30:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2017-07-08 13:30:40, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2017-07-08 13:31:41, Error CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2017-07-08 13:31:41, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2017-07-08 13:32:03, Error MOUPG CSetupHost::ReportEventW(1618): Result = 0x8024F005
2017-07-08 13:32:03, Error MOUPG SetupHost: Reporting pending reboot event failed: hr = [0x8024F005]
2017-07-08 13:32:03, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

6. Saznajte što zaustavlja instalaciju, riješite to deinstaliranjem, onemogućavanjem ili ažuriranjem i pokušajte ponovno instalirati.

7. U gornjoj datoteci, ako pažljivo pogledate, problem je stvorio Avast i stoga je deinstaliranje riješilo problem.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi grešku instalacije pisača 0x000003eb^{(Fix Printer Installation Error 0x000003eb)}
• Kako popraviti NETWORK_FAILED u Chromeu^{(How To Fix NETWORK_FAILED in Chrome)}
• Fix Google Chrome error He’s Dead, Jim!
• Popravak postavki sustava Windows neće se otvoriti^{(Fix Windows Settings won’t open)}

To je to što ste uspješno popravili pogrešku Instalacija nije uspjela u prvoj fazi pokretanja^{(Fix The Installation Failed In The First Boot Phase Error)} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

Fix The Installation Failed In The First Boot Phase Error

Fix The Installation Failed In The First Boot Phase Error: If you are upgrading to Windows 10 or upgrading to a new major update from Microsoft then chances are the installation may fail and you will be left with an error message saying “We couldn’t install Windows 10.” If you look closely you will find some additional information at the bottom which would be an error code 0xC1900101 – 0x30018 or 0x80070004 – 0x3000D depending upon the type of error. So these are the following error which you can receive:

0x80070004 – 0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATE operation.

0xC1900101 – 0x30018
The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.

0xC1900101-0x30017
The installation failed in the FIRST_BOOT phase with an error during BOOT operation.

Now all the above errors are either caused due to incorrect registry configuration or due to device drivers conflict. Sometimes 3rd party software can also cause the above errors, so we need to troubleshoot the issue and fix the cause in order to resolve this error. So without wasting any time let’s see how to actually Fix The Installation Failed In The First Boot Phase Error with the help of below-listed troubleshooting guide.

Fix The Installation Failed In The First Boot Phase Error

Make sure to create a restore point just in case something goes wrong.

Note: Make sure to disconnect any external devices connected to PC.

Method 1: Temporarily Disable Antivirus and Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to open Google Chrome and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Check for Windows Update

1.Press Windows Key + I then select Update & Security.

2.Next, again click Check for updates and make sure to install any pending updates.

3.After the updates are installed reboot your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 3: Run Official Windows Update Troubleshooter

If nothing works till now then you should definitely try running Windows Update Troubleshooter from Microsoft Website itself and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 4: Run Windows Update in Clean Boot

This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order Fix The Installation Failed In The First Boot Phase Error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 5: Make sure you have enough Disc Space

In order to install Windows update/upgrade successfully, you will need at least 20GB of free space on your hard disk. It not likely that the update will consume all the space but it’s a good idea to free at least 20GB of space on your system drive in order for the installation to complete without any problems.

Method 6: Rename SoftwareDistribution Folder

1.Press Windows Key + X then select Command Prompt (Admin).

2.Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3.Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5.Reboot your PC to save changes.

Method 7: Registry Fix

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade

3.If you don’t find the OSUpgrade key then right-click on WindowsUpdate and select New > Key.

4.Name this key as OSUpgrade and hit Enter.

5.Now make sure you have selected OSUpgrade and then in the right window pane right-click anywhere in the empty area and select New > DWORD (32-bit) value.

6.Name this key as AllowOSUpgrade and double click on it to change it’s value to 1.

7.Again try to install the updates or re-run the upgrade process and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 8: Delete a particular file messing with upgrade

1.Navigate to the following directory:

C:\Users\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Orbx

Note: In order to see AppData folder you need to check mark show hidden files and folders from Folder Options.

2.Alternatively, you could press Windows Key + R then type %appdata%\Microsoft\Windows\Start Menu\Programs\Orbx and hit Enter to directly open AppData folder.

3.Now under Orbx folder, find a file called Todo, if the file exists make sure to permanently delete it.

4.Reboot your PC and again try the upgrade process.

Method 9: Update BIOS

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double-click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may also Fix The Installation Failed In The First Boot Phase Error.

Method 10: Disable Secure Boot

1.Restart your PC.

2.When the system restart Enter the BIOS setup by pressing a key during the bootup sequence.

3.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.

#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.

4.Restart your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

5.Again Enable the Secure Boot option from BIOS setup.

Method 11: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes and this would Fix The Installation Failed In The First Boot Phase Error, if not then continue with the next method.

Method 12: Run System File Checker and DISM Tool

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes.

Method 13: Troubleshooting

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd as it (copy and paste it) and hit Enter after each one:

takeown /f C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log
icacls C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log /reset /T
notepad C:\$Windows.~BT\Sources\Panther\setuperr.log

3.Now navigate to the following directory:

C:\$Windows.~BT\Sources\Panther

Note: You need to check mark “Show hidden files and folders” and uncheck “Hide operating system files” in Folder Options in order to see the above folder.

4.Double click on the file setuperr.log, in order to open it.

5.The error file will have information like this:

2017-07-07 13:24:01, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadRegFromFile :: OpenFile error (C:\$WINDOWS.~BT\Work\MachineIndependent\Working\srcworking\agentmgr\CCSIAgent\005A4BDD\HKLM-E0xxxx04IME.reg) gle=2
2017-07-07 13:24:07, Error SP Error WRITE, 0x00000005 while gathering/applying object: File, C:\Windows\System32\Tasks [avast! Emergency Update]. Will return 0[gle=0x00000005]
2017-07-07 13:24:07, Error MIG Error 5 while applying object C:\Windows\System32\Tasks\avast! Emergency Update. Shell application requested abort[gle=0x00000005]
2017-07-07 13:24:07, Error [0x08097b] MIG Abandoning apply due to error for object: C:\Windows\System32\Tasks\avast! Emergency Update[gle=0x00000005]
2017-07-07 13:24:08, Error Apply failed. Last error: 0x00000000
2017-07-07 13:24:08, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C
2017-07-07 13:24:09, Error SP Apply: Migration phase failed. Result: 44
2017-07-07 13:24:09, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed.[gle=0x000000b7]
2017-07-07 13:24:09, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]



2017-07-07 17:24:01, Error [SetupHost.Exe] ReAgentXMLParser::ParseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Drivers of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.GDRs of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Langpacks of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.FeaturesOnDemand of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-08 13:30:12, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2017-07-08 13:30:19, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2017-07-08 13:30:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2017-07-08 13:30:40, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2017-07-08 13:31:41, Error CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2017-07-08 13:31:41, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2017-07-08 13:32:03, Error MOUPG CSetupHost::ReportEventW(1618): Result = 0x8024F005
2017-07-08 13:32:03, Error MOUPG SetupHost: Reporting pending reboot event failed: hr = [0x8024F005]
2017-07-08 13:32:03, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

6.Find out what is stopping the install, address it by uninstalling, disabling or updating and retry the installation.

7.In the above file if you will look closely the issue is created by Avast and hence uninstalling it fixed the issue.

Recommended for you:

• Fix Printer Installation Error 0x000003eb
• How To Fix NETWORK_FAILED in Chrome
• Fix Google Chrome error He’s Dead, Jim!
• Fix Windows Settings won’t open

That’s it you have successfully Fix The Installation Failed In The First Boot Phase Error but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Popravi grešku instalacije pisača 0x000003eb

• Popravite grešku zaustavljanja volumena pokretanja koji se ne može montirati 0x000000ED

• Popravite pogrešku uređaja za pokretanje nepristupačnog sustava u sustavu Windows 11

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravite pogrešku Windows Update 0x80070020

• Popravite pogrešku možda oštećene predmemorije Windows Store

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• Kako popraviti grešku aplikacije 523

• Popravi Omegle pogrešku pri povezivanju s poslužiteljem (2022)

• [RJEŠENO] Pogreška umetnite disk u prijenosni disk

• Popravak pogreške 1603: Došlo je do fatalne pogreške tijekom instalacije

• Popravi pogrešku provjere autentičnosti pristupnika modema U-Verse

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi grešku učitavanja aplikacije Steam 3:0000065432

• Fix USB Error Code 52 Windows ne može provjeriti digitalni potpis

• Ispravite pogrešku Windows 10 Ažuriranja neće instalirati

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• 4 načina za pokretanje provjere grešaka diska u sustavu Windows 10