Ispravite pogrešku 2502 i 2503 tijekom instalacije ili deinstalacije: ^{(Fix Error 2502 and 2503 while installing or uninstalling: )} Pa, ako dobijete internu pogrešku 2502/2503 kada pokušavate instalirati novi program ili deinstalirati postojeći program, onda ste na pravom mjestu jer ćemo danas raspravljati o tome kako riješiti ovu grešku. Čini se da je pogreška 2502 i 2503 tijekom instaliranja ili deinstaliranja programa uzrokovana problemom s dozvolama za mapu Temp u ^(Temp)sustavu Windows^(Windows) koja se obično može naći u C: Windows Temp .

Ovo su pogreške na koje možete naići tijekom instalacije ili deinstaliranja programa:

• Instalater je naišao na neočekivanu pogrešku prilikom instaliranja ovog paketa. To može ukazivati ​​na problem s ovim paketom. Šifra greške je 2503.
• Instalater je naišao na neočekivanu pogrešku prilikom instaliranja ovog paketa. To može ukazivati ​​na problem s ovim paketom. Šifra greške je 2502.
• Poziva se RunScript kada nije označeno u tijeku
• Poziva se InstallFinalize kada nijedna instalacija nije u tijeku.

Iako problem nije ograničen na ovaj uzrok, jer ponekad virus ili zlonamjerni softver, netočan registar, oštećeni Windows Installer , nekompatibilni programi treće strane itd. također mogu uzrokovati pogrešku 2502/2503. Dakle, bez gubljenja vremena, pogledajmo kako zapravo popraviti pogreške 2502^{(Fix Error 2502)} i 2503 dok instalirate ili deinstalirate program u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Ispravite pogreške 2502^{(Fix Error 2502)} i 2503 tijekom instaliranja ili deinstaliranja

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Savjet stručnjaka:^{(Pro Tip:)} pokušajte pokrenuti aplikaciju desnim klikom, a zatim odaberite Pokreni^(Run) kao administrator .

Metoda 1: Ponovno registrirajte Windows Installer^{(Method 1: Re-register Windows Installer)}

1. Pritisnite Windows Key + R zatim upišite sljedeće i pritisnite Enter: msiexec /unreg

2. Sada ponovno otvorite dijaloški okvir za pokretanje i upišite msiexec /regserver i pritisnite Enter.

3. Time bi se ponovno registrirao Windows Installer . Ponovno pokrenite^(Reboot) računalo da biste spremili promjene.

Metoda 2: Pokrenite CCleaner i Malwarebytes^{(Method 2: Run CCleaner and Malwarebytes)}

Izvršite potpuno^(Full) antivirusno skeniranje kako biste bili sigurni da je vaše računalo sigurno. Osim ovoga, pokrenite CCleaner i Malwarebytes Anti-malware .

1. Preuzmite i instalirajte  CCleaner  &  Malwarebytes.

2. Pokrenite Malwarebytes^{(Run Malwarebytes)}  i neka skenira vaš sustav u potrazi za štetnim datotekama.

3. Ako se pronađe zlonamjerni softver, automatski će ih ukloniti.

4. Sada pokrenite  CCleaner  i u odjeljku "Cleaner", na kartici Windows , predlažemo da provjerite sljedeće odabire za čišćenje:

5. Nakon što ste se uvjerili da su odgovarajuće točke provjerene, jednostavno kliknite  Run Cleaner  i pustite CCleaner da radi svojim tijekom.

6. Za dodatno čišćenje sustava odaberite karticu Registry i provjerite je li označeno sljedeće:

7. Odaberite Skeniraj^(Scan) za problem^(Issue) i dopustite CCleaner -u da skenira, a zatim kliknite  Popravi odabrane probleme.^{(Fix Selected Issues.)}

8.Kada CCleaner pita “ Želite li sigurnosne kopije promjena u registru? ^{(Do you want backup changes to the registry?)}” odaberite Da.

9. Nakon što je sigurnosno kopiranje dovršeno, odaberite Popravi sve odabrane probleme^{(Fix All Selected Issues)} .

10. Ponovno pokrenite računalo da biste spremili promjene i to bi trebalo  popraviti pogreške 2502 i 2503 tijekom instaliranja ili deinstaliranja programa.^{(Fix Error 2502 and 2503 while installing or uninstalling a program.)}

Metoda 3: Pokrenite Installer s administratorskim pravima pomoću naredbenog retka^{(Method 3: Run Installer with Admin rights using Command Prompt)}

1.Otvorite File Explorer, a zatim kliknite View > Options i provjerite da li ste označili " Prikaži skrivene datoteke, mape i upravljačke programe. ^{(Show hidden files, folders, and drivers.)}” Opet^(Again) u istom prozoru poništite opciju “ Sakrij zaštićene datoteke operativnog sustava (preporučeno). ^{(Hide protected operating system files (Recommended).)}“

2. Kliknite Primijeni, a zatim OK.

3. Pritisnite tipku Windows Key + R zatim upišite sljedeće i pritisnite Enter:

C:\Windows\Installer

4. Desni klik na prazno područje i odaberite View > Details.

5. Sada desnom tipkom miša kliknite traku stupca gdje je napisano Ime, Vrsta, Veličina itd . i odaberite ^{(Name, Type, Size etc)}Više.^(More.)

6. Na popisu označite predmet i kliknite OK.

7. Sada na popisu pronađite ispravan program^{(correct program)} koji želite instalirati.

8. Pritisnite Windows Key + X , a zatim odaberite Command Prompt (Admin).

9. Sada upišite sljedeće i pritisnite Enter:

C:\Windows\Installer\Program.msi

Napomena: Umjesto programa .msi upišite naziv .msi datoteke koja uzrokuje problem i ako se datoteka nalazi u Temp mapi tada biste upisali njezinu stazu i pritisnite Enter .

10. Time bi se pokrenuo instalacijski program s administrativnim pravima i ne biste se suočili s Error 2502/2503 .

11. Ponovo pokrenite računalo da biste spremili promjene i to bi trebalo popraviti pogreške 2502 i 2503 tijekom instaliranja ili deinstaliranja programa.^{(Fix Error 2502 and 2503 while installing or uninstalling a program.)}

Metoda 4: Pokrenite Explorer.exe s administrativnim privilegijama^{(Method 4: Run Explorer.exe with administrative privileges)}

1. Pritisnite zajedno tipke Ctrl + Shift + Esc da biste otvorili Upravitelj zadataka^{(Task Manager)} .

2. Pronađite Explorer.exe zatim kliknite desnom tipkom miša na njega i odaberite Završi zadatak.^{(End Task.)}

3. Sada kliknite na File > Run novi zadatak i upišite Explorer.exe.

4. Potvrdite Stvori ovaj zadatak s administrativnim privilegijama^{( Create this task with administrative privileges)} i kliknite U redu.

5. Opet pokušajte instalirati/deinstalirati program koji je ranije davao pogreške 2502 i 2503.

Metoda 5: Postavite ispravna dopuštenja za mapu Windows Installer^{(Method 5: Set correct permissions for Windows Installer Folder)}

1.Otvorite File Explorer, a zatim kliknite View > Options i provjerite da li ste označili " Prikaži skrivene datoteke, mape i upravljačke programe. ^{(Show hidden files, folders, and drivers.)}” Opet^(Again) u istom prozoru poništite opciju “ Sakrij zaštićene datoteke operativnog sustava (preporučeno). ^{(Hide protected operating system files (Recommended).)}“

2. Kliknite Primijeni, a zatim OK.

3. Sada idite na sljedeći put: C:\Windows

4. Potražite mapu Installer^{(Installer folder)} , a zatim je kliknite desnom tipkom miša i odaberite Svojstva.^{(Properties.)}

5. Prijeđite na karticu Sigurnost^{(Security tab)} i kliknite Uredi^(Edit) pod Dopuštenjima.^{(Permissions.)}

6. Zatim provjerite je li označena Potpuna kontrola^{(Full Control)} za sustav i administratore.^{( System and Administrators.)}

7. Ako ne, onda ih odaberite jedan po jedan pod imenima grupe ili korisnika^{(group or user names)} , a zatim pod dopuštenjima kvačicom Potpuna kontrola.^{(Full Control.)}

8. Kliknite Primijeni, a zatim OK.

9. Ponovo pokrenite računalo da biste spremili promjene.

Ovo bi trebalo ispraviti pogreške 2502^{(Fix Error 2502)} i 2503 tijekom instaliranja ili deinstaliranja programa, ali ako ste još uvijek zapeli, slijedite korake navedene pod metodom 6 i za mapu Windows Installer .

Metoda 6: Postavite ispravna dopuštenja za privremenu mapu^{(Method 6: Set Correct Permissions for Temp Folder)}

1. Idite do sljedeće mape u File Exploreru^{(File Explorer)} : C:\Windows\Temp

2. Desnom tipkom miša kliknite mapu Temp^{(Temp folder)} i odaberite Svojstva.^{(Properties.)}

3. Prijeđite na karticu Sigurnost^(Security) , a zatim kliknite Napredno.^(Advanced.)

4. Kliknite gumb Dodaj^{(Add button)} i pojavit će se prozor za unos dopuštenja .^{(Permission Entry window)}

5. Sada kliknite " Odaberi ravnatelja^{(Select a principal)} " i upišite svoj korisnički račun.

6. Ako ne znate naziv svog korisničkog računa, kliknite Napredno.^(Advanced.)

7. U novom prozoru koji se otvori kliknite Pronađi sada.^{(Find now.)}

8. Odaberite svoj korisnički račun s^{( your user account from)} popisa, a zatim kliknite OK.^{(click OK.)}

9. Po želji, za promjenu vlasnika svih podmapa i datoteka unutar mape, označite potvrdni okvir " Zamijeni vlasnika na podkontejnerima i objektima^{(Replace owner on subcontainers and objects)} " u prozoru Napredne sigurnosne postavke^{(Advanced Security Settings)} . Kliknite OK^{(Click OK)} za promjenu vlasništva.

10. Sada morate osigurati puni pristup datoteci ili mapi za svoj račun. Ponovno desnom tipkom miša kliknite datoteku ili mapu, kliknite Svojstva, kliknite karticu Sigurnost^(Security) , a zatim kliknite Napredno^(Advanced) .

11. Kliknite gumb Dodaj^{( Add button)} . Na ekranu će se pojaviti prozor "Permission Entry".

12.Kliknite " Odaberi ravnatelja^{(Select a principal)} " i odaberite svoj račun.

13. Postavite dopuštenja na “ Puna kontrola^{(Full control)} ” i kliknite OK.

14. Ponovite gornje korake za ugrađenu grupu administratora.^{(Administrators group.)}

15. Ponovo pokrenite računalo da biste spremili promjene.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravi crni zaslon s pokazivačem pri pokretanju^{(Fix Black Screen With Cursor On Startup)}
• Popravite Windows koji je otkrio problem s tvrdim diskom^{(Fix Windows detected a hard disk problem)}
• 6 načina da popravite Windows trgovina se neće otvoriti^{(6 Ways To Fix Windows Store Won’t Open)}
• Kako popraviti Chrome se ne otvara ili ne pokreće^{(How to Fix Chrome Won’t Open or Launch)}

To je to što ste uspješno popravili pogreške 2502 i 2503 dok ste instalirali ili deinstalirali program^{(Fix Error 2502 and 2503 while installing or uninstalling a program)} u sustavu Windows 10^{(Windows 10)} , ali ako i dalje imate bilo kakvih pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

Fix Error 2502 and 2503 while installing or uninstalling

Fix Error 2502 and 2503 while installing or uninstalling: Well, if you are getting error 2502/2503 internal error when trying to install a new program or uninstalling an existing program then you are at the right place as today we are going to discuss how to resolve this error. The error 2502 and 2503 while installing or uninstalling a program seems to be caused because of permissions issue with the Temp folder of Windows which can be usually found in C:\Windows\Temp.

These are the error you may encounter while installing or uninstalling a program:

• The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2503.
• The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2502.
• Called RunScript when not marked in progress
• Called InstallFinalize when no install in progress.

While the issue is not limited to this cause as sometimes virus or malware, incorrect registry, corrupt Windows Installer, incompatible 3rd party programs etc can also cause the error 2502/2503. So without wasting any time let’s see how to actually Fix Error 2502 and 2503 while installing or uninstalling a program in Windows 10 with the help of below-listed troubleshooting guide.

Fix Error 2502 and 2503 while installing or uninstalling

Make sure to create a restore point just in case something goes wrong.

Pro Tip: Try to run the application by right-clicking and then select Run as Administrator.

Method 1: Re-register Windows Installer

1.Press Windows Key + R then type the following and hit Enter: msiexec /unreg

2.Now again open the run dialog box and type msiexec /regserver and hit Enter.

3.This would re-register the Windows Installer. Reboot your PC to save changes.

Method 2: Run CCleaner and Malwarebytes

Perform a Full antivirus scan to make sure your computer is secure. In addition to this run CCleaner and Malwarebytes Anti-malware.

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes and this should Fix Error 2502 and 2503 while installing or uninstalling a program.

Method 3: Run Installer with Admin rights using Command Prompt

1.Open File Explorer then click View > Options and make sure to check “Show hidden files, folders, and drivers.” Again in the same window uncheck “Hide protected operating system files (Recommended).“

2.Click Apply followed by OK.

3.Press Windows Key + R then type the following and press Enter:

C:\Windows\Installer

4.Right click in an empty area and select View > Details.

5.Now right click on the column bar where Name, Type, Size etc is written and select More.

6.From the list check mark subject and click OK.

7.Now find the correct program which you want to install from the list.

8.Press Windows Key + X then select Command Prompt (Admin).

9.Now type the following and hit Enter:

C:\Windows\Installer\Program.msi

Note: Instead of the program.msi type the name of the .msi file causing the problem and if the file is located in Temp folder then you would type it’s path and press Enter.

10.This would run the installer with administrative rights and you would not face the Error 2502/2503.

11.Reboot your PC to save changes and this should Fix Error 2502 and 2503 while installing or uninstalling a program.

Method 4: Run Explorer.exe with administrative privileges

1.Press Ctrl + Shift + Esc keys together to open Task Manager.

2.Find Explorer.exe then right-click on it and select End Task.

3.Now click on File > Run new task and type Explorer.exe.

4.Check mark Create this task with administrative privileges and click OK.

5.Again try to install/uninstall the program which was earlier giving the error 2502 and 2503.

Method 5: Set correct permissions for Windows Installer Folder

1.Open File Explorer then click View > Options and make sure to check “Show hidden files, folders, and drivers.” Again in the same window uncheck “Hide protected operating system files (Recommended).“

2.Click Apply followed by OK.

3.Now navigate to the following path: C:\Windows

4.Look for Installer folder then right-click on it and select Properties.

5.Switch to Security tab and click Edit under Permissions.

6.Next, make sure Full Control is checked for System and Administrators.

7.If not then select them one by one under group or user names then under permissions check mark Full Control.

8.Click Apply followed by OK.

9.Reboot your PC to save changes.

This should Fix Error 2502 and 2503 while installing or uninstalling a program but if you’re still stuck then follow the steps listed under method 6 for Windows Installer folder also.

Method 6: Set Correct Permissions for Temp Folder

1.Navigate to the following folder in File Explorer: C:\Windows\Temp

2.Right-click on Temp folder and select Properties.

3.Switch to Security tab and then click Advanced.

4.Click Add button and the Permission Entry window will appear.

5.Now click “Select a principal” and type in your user account.

6.If you don’t know your user account name then click Advanced.

7.In the new window that opens click Find now.

8.Select your user account from the list and then click OK.

9.Optionally, to change the owner of all sub folders and files inside the folder, select the check box “Replace owner on subcontainers and objects” in the Advanced Security Settings window. Click OK to change the ownership.

10.Now you need to provide full access to the file or folder for your account. Right-click the file or folder again, click Properties, click the Security tab and then click Advanced.

11.Click the Add button. The “Permission Entry” window will appear on the screen.

12.Click “Select a principal” and select your account.

13.Set permissions to “Full control” and Click OK.

14.Repeat the above steps for the built-in Administrators group.

15.Reboot your PC to save changes.

Recommended for you:

• Fix Black Screen With Cursor On Startup
• Fix Windows detected a hard disk problem
• 6 Ways To Fix Windows Store Won’t Open
• How to Fix Chrome Won’t Open or Launch

That’s it you have successfully Fix Error 2502 and 2503 while installing or uninstalling a program in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Ispravite pogrešku Windows 10 Ažuriranja neće instalirati

• Popravite pogrešku odbijenog pristupa Windows Installeru

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Popravi pogrešku DISM izvornih datoteka nije moguće pronaći

• 6 načina da popravite Steam pogrešku transakcije na čekanju

• Popravite pogrešku Windows Update 0x80080005

• Popravak pogreške 651: modem (ili drugi uređaj za povezivanje) prijavio je pogrešku

• Popravite pogrešku trgovine Windows 10 0x80073cf9

• Popravite pogrešku Windows Update 0x800704c7

• Kako popraviti pogrešku Windows Update 80072ee2

• Popravi Omegle pogrešku pri povezivanju s poslužiteljem (2022)

• Popravite šifru pogreške aktivacije sustava Office 0xC004F074

• Ispravite pogrešku Ne mogu se sigurno spojiti na ovu stranicu u Microsoft Edgeu

• Popravi pogrešku provjere autentičnosti pristupnika modema U-Verse

• Popravi pogrešku Window Defendera 0x800705b4