Popravi MULTIPLE_IRP_COMPLETE_REQUESTS pogrešku: ^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error: )} Ako se suočavate s više_ IRP _Complete_Requests s vrijednošću provjere bugova od 0x00000044 i Plavim ekranom ^{(Blue Screen)}smrti^(Death) , to znači da je upravljački program pokušao zatražiti IRP (I/O paket zahtjeva) da bude dovršen, što je već dovršeno pa stvara sukob, a time i poruku o pogrešci. Dakle, u osnovi je problem s upravljačkim programom, gdje upravljački program dvaput pokušava dovršiti vlastiti paket.

Glavni problem je što dva odvojena upravljačka programa uređaja vjeruju da obojica posjeduju paket i pokušavaju dovršiti paket, ali samo od njih uspijeva dok drugi ne uspijeva, što rezultira MULTIPLE_IRP_COMPLETE_REQUESTS BSOD pogreškom. Dakle, bez gubljenja vremena, pogledajmo kako popraviti pogrešku MULTIPLE_IRP_COMPLETE_REQUESTS^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Profesionalni savjet: Ako koristite bilo koji softver Virtual Drive kao što je LogMeIn Hamachi , Daemon tools, deinstalirajte ih i potpuno uklanjanje njihovih upravljačkih programa trebalo bi pomoći u rješavanju ovog problema.

Ispravi MULTIPLE_IRP_COMPLETE_REQUESTS pogrešku^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error)}

Obavezno  stvorite točku vraćanja^{(create a restore point)} , za slučaj da nešto pođe po zlu.

Metoda 1: Koristite preglednik događaja^{(Method 1: Use Event Viewer)}

1. Pritisnite tipku Windows + R zatim upišite eventvwr.msc i pritisnite Enter da otvorite preglednik događaja.^{(Event Viewer.)}

2. U pregledniku događaja^{(Event Viewer)} idite na sljedeći put:

Event Viewer (Local) > Windows Logs > System

3. Potražite Blue Screen of Death unos ili MULTIPLE_IRP_COMPLETE_REQUESTS i provjerite koji je upravljački program izazvao pogrešku.

4. Ako možete pronaći problematični upravljački program, pritisnite tipku Windows Key + R , zatim upišite devmgmt.msc i pritisnite Enter.

5. Desnom tipkom miša kliknite problematični upravljački program uređaja i odaberite Deinstaliraj.^(Uninstall.)

6. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li  popraviti grešku MULTIPLE_IRP_COMPLETE_REQUESTS.^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.)}

Metoda 2: Rješavanje problema s BSOD pogreškom^{(Method 2: Troubleshoot BSOD Error)}

1. Preuzmite BlueScreenView ovdje^{(Download BlueScreenView from here)} .

2. Izdvojite ili instalirajte softver prema vašoj arhitekturi sustava Windows^(Windows) i dvaput kliknite na njega da biste pokrenuli aplikaciju.

3.Odaberite MULTIPLE_IRP_COMPLETE_REQUESTS (string za provjeru grešaka)^{(MULTIPLE_IRP_COMPLETE_REQUESTS (Bug Check String))} i potražite " prouzrokovano upravljačkim programom^{(caused by driver)} ".

4. Google pretraži softver ili upravljački program koji uzrokuje problem i riješi temeljni uzrok.

5.Preuzmite i instalirajte^(Install) najnovije dostupne upravljačke programe s web-mjesta proizvođača.

6. Ako ovo ne riješi problem, pokušajte deinstalirati upravljačke programe uređaja.^{(uninstalling the device drivers.)}

Metoda 3: Pokrenite Provjeru sistemskih datoteka i DISM alat^{(Method 3: Run System File Checker and DISM Tool)}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

4. Opet otvorite cmd i upišite sljedeću naredbu i pritisnite enter nakon svake:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5. Pustite naredbu DISM da se pokrene i pričekajte da završi.

6. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows lokacijom vašeg izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

7. Ponovo pokrenite računalo da biste spremili promjene i provjerili možete li  popraviti grešku MULTIPLE_IRP_COMPLETE_REQUESTS.^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.)}

Metoda 4: Pokrenite program za provjeru upravljačkog programa^{(Method 4: Run Driver Verifier)}

Ova je metoda korisna samo ako se možete prijaviti u svoj Windows obično ne u sigurnom načinu rada. Zatim svakako stvorite točku za vraćanje sustava.

Method 5: Run Memtest86+

1. Spojite USB flash pogon na svoj sustav.

2.Preuzmite i instalirajte Windows Memtest86  Auto-installer za USB ključ^{(Windows Memtest86 Auto-installer for USB Key)} .

3. Desnom tipkom miša kliknite na slikovnu datoteku koju ste upravo preuzeli i odaberite opciju “ Extract here ”.

4. Nakon raspakiranja, otvorite mapu i pokrenite Memtest86+ USB Installer .

5. Odaberite svoj priključeni USB pogon kako biste snimili softver MemTest86 (ovo će formatirati vaš USB pogon).

6. Kada se gornji proces završi, umetnite USB u računalo koje prikazuje grešku MULTIPLE_IRP_COMPLETE_REQUESTS .

7. Ponovno pokrenite računalo i provjerite je li odabrano pokretanje s USB flash pogona.

8.Memtest86 će započeti testiranje na oštećenje memorije u vašem sustavu.

9. Ako ste prošli sve testove, možete biti sigurni da vaša memorija radi ispravno.

10. Ako su neki od koraka bili neuspješni, Memtest86 će pronaći oštećenje memorije što znači da je greška MULTIPLE_IRP_COMPLETE_REQUESTS pogreška^{(MULTIPLE_IRP_COMPLETE_REQUESTS Error)} zbog loše/oštećene memorije.

11. Kako biste popravili grešku  MULTIPLE_IRP_COMPLETE_REQUESTS^{( Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error)} , morat ćete zamijeniti RAM ako se pronađu loši memorijski sektori.

Metoda 6: Ažurirajte svoj BIOS^{(Method 6: Update your BIOS)}

Izvođenje ažuriranja BIOS -a kritičan je zadatak i ako nešto pođe po zlu može ozbiljno oštetiti vaš sustav, stoga se preporučuje stručni nadzor.

1. Prvi korak je identificirati svoju verziju BIOS- a, da biste to učinili pritisnite tipku  Windows Key + R , zatim upišite “ msinfo32 ” (bez navodnika) i pritisnite enter da otvorite informacije o sustavu^{(System Information)} .

2. Nakon što se otvori prozor s informacijama o sustavu^{( System Information)} , pronađite BIOS Version/Date zatim zabilježite proizvođača i verziju BIOS- a.

3. Sljedeće, idite na web-stranicu vašeg proizvođača, npr. u mom slučaju je to Dell , pa ću otići na web- stranicu Della^{(Dell website)} , a zatim ću unijeti serijski broj svog računala ili kliknuti na opciju automatskog otkrivanja.

4. Sada ću s prikazanog popisa upravljačkih programa kliknuti na BIOS i preuzeti preporučeno ažuriranje.

Napomena:^(Note:) Nemojte isključivati ​​svoje računalo i ne odspajati ga iz izvora napajanja tijekom ažuriranja BIOS -a jer biste mogli oštetiti svoje računalo. Tijekom ažuriranja, vaše će se računalo ponovno pokrenuti i nakratko ćete vidjeti crni ekran.

5. Nakon što se datoteka preuzme, samo dvaput kliknite na Exe datoteku da biste je pokrenuli.

6. Napokon ste ažurirali svoj BIOS i to bi također moglo  popraviti grešku MULTIPLE_IRP_COMPLETE_REQUESTS.^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.)}

Preporučeno:^{(Recommended:)}

• Popravite WORKER_INVALID grešku plavog zaslona u sustavu Windows 10^{(Fix WORKER_INVALID Blue Screen Error on Windows 10)}
• Zaustavite automatsko preuzimanje upravljačkih programa u sustavu Windows 10^{(Stop Automatic Driver Downloads on Windows 10)}
• Promijenite prikaz zadane mape rezultata pretraživanja u sustavu Windows 10^{(Change Default Folder View of Search Results on Windows 10)}
• Zaustavite Windows 10 da automatski instalira Realtek audio upravljačke programe^{(Stop Windows 10 from automatically installing Realtek Audio Drivers)}

To je to što ste uspješno popravili grešku MULTIPLE_IRP_COMPLETE_REQUESTS^{(Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error)} , ali ako još uvijek imate pitanja u vezi s ovim postom, slobodno ih postavite u odjeljku za komentare.

Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error

Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error: If you are facing Multiple_IRP_Complete_Requests with a bug check value of 0x00000044 and a Blue Screen of Death then this indicates that a driver has tried to request an IRP (I/O request packet) be completed which is already complete, so it creates a conflict and thus the error message. So basically its a driver issue, where a driver attempts to complete its own packet twice.

The main problem is that two separate device drivers believe that they both own the packet and try to complete the package but only of them succeeds while the other one fails, resulting in MULTIPLE_IRP_COMPLETE_REQUESTS BSOD error. So without wasting any time let’s see How to Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error with the help of below-listed troubleshooting guide.

Pro Tip: If you use any Virtual Drive software such as LogMeIn Hamachi, Daemon tools, then uninstall them and completely removing their drivers should help in fixing this issue.

Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error

Make sure to create a restore point, just in case something goes wrong.

Method 1: Use Event Viewer

1.Press Windows Key + R then type eventvwr.msc and hit Enter to open Event Viewer.

2.In the Event Viewer navigate to the following path:

Event Viewer (Local) > Windows Logs > System

3.Look for Blue Screen of Death entry or MULTIPLE_IRP_COMPLETE_REQUESTS and check which driver has caused the error.

4.If you can find the problematic driver then press Windows Key + R then type devmgmt.msc and hit Enter.

5.Right-click on the problematic device driver and select Uninstall.

6.Reboot your PC to save changes and see if you’re able to Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.

Method 2: Troubleshoot BSOD Error

1.Download BlueScreenView from here.

2.Extract or install the software according to your Windows architecture and double click on it to run the application.

3.Select the MULTIPLE_IRP_COMPLETE_REQUESTS (Bug Check String) and look for the “caused by driver“.

4.Google search the software or driver causing the issue and fix the underlying cause.

5.Download & Install the latest available drivers from the manufacturer’s website.

6.If this doesn’t fix the issue then try uninstalling the device drivers.

Method 3: Run System File Checker and DISM Tool

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes and see if you’re able to Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.

Method 4: Run Driver Verifier

This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.

Method 5: Run Memtest86+

1.Connect a USB flash drive to your system.

2.Download and install Windows Memtest86 Auto-installer for USB Key.

3.Right-click on the image file which you just downloaded and select “Extract here” option.

4.Once extracted, open the folder and run the Memtest86+ USB Installer.

5.Choose your plugged in USB drive, in order to burn the MemTest86 software (This will format your USB drive).

6.Once the above process is finished, insert the USB to the PC which is showing the error MULTIPLE_IRP_COMPLETE_REQUESTS.

7.Restart your PC and make sure that boot from the USB flash drive is selected.

8.Memtest86 will begin testing for memory corruption in your system.

9.If you have passed all the test then you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means MULTIPLE_IRP_COMPLETE_REQUESTS Error is because of bad/corrupt memory.

11.In order to Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error, you will need to replace your RAM if bad memory sectors are found.

Method 6: Update your BIOS

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double-click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may also Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error.

Recommended:

• Fix WORKER_INVALID Blue Screen Error on Windows 10
• Stop Automatic Driver Downloads on Windows 10
• Change Default Folder View of Search Results on Windows 10
• Stop Windows 10 from automatically installing Realtek Audio Drivers

That’s it you have successfully Fix MULTIPLE_IRP_COMPLETE_REQUESTS Error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Popravi pogrešku 0X80010108 u sustavu Windows 10

• Kako popraviti grešku aplikacije 0xc0000005

• Popravite šifru pogreške Windows Update 0x80072efe

• Kako popraviti pogrešku učitavanja aplikacije 5:0000065434

• Popravi grešku BAD_SYSTEM_CONFIG_INFO

• Popravite pogrešku Windows Update 80246008

• Popravi pogrešku alata za stvaranje medija 0x80042405-0xa001a

• Popravi pogrešku Minecrafta nije uspjelo napisati ispis jezgre

• Ispravite pogrešku odbijenog pristupa odredišnoj mapi

• Popravi pogrešku TVAPP-00100 na Xfinity Streamu

• Popravite pogrešku odspajanja medija u sustavu Windows 10

• Ispravite pogrešku Ne mogu se sigurno spojiti na ovu stranicu u Microsoft Edgeu

• Popravi pogrešku io.netty.channel.AbstractChannel$AnnotatedConnectException u Minecraftu

• Popravak Nemogućnost instalacije mrežnog adaptera kod pogreške 28

• Popravite nedostatne resurse sustava da biste dovršili pogrešku API-ja

• Popravite kôd pogreške u trgovini Windows 0x803F8001

• Popravite pogrešku odbijenog pristupa Windows Installeru

• Popravite pogrešku Windows Update 0x80080005

• Popravite pogrešku Windows Update 0x800704c7

• Popravite šifru pogreške aktivacije sustava Office 0xC004F074