Uređivač lokalnih grupnih pravila^{(Local Group Policy Editor)} (gpedit.msc) je Windows alat koji koriste administratori za izmjenu grupnih pravila. Pravila grupe^{(Group Policy)} koriste se od strane administratora Windows domene za izmjenu Windows pravila za sve ili određeno računalo na domeni. Uz pomoć gpedit.msc, možete jednostavno kontrolirati koja se aplikacija može pokrenuti pomoću koje korisnici mogu zaključati određene značajke za određene korisnike, ograničiti pristup određenim mapama, mijenjati korisničko sučelje Windowsa^{(Windows user)} i popis se nastavlja.

Također, postoji razlika između pravila lokalne grupe^{(Local Group Policy)} i pravila grupe^{(Group Policy)} . Ako se vaše računalo ne nalazi ni na jednoj domeni, onda se gpedit.msc može koristiti za uređivanje pravila koja se primjenjuju na određenom računalu i u ovom slučaju se zove Lokalna grupna pravila^{(Local Group Policy)} . Ali ako je računalo pod domenom, administrator domene može izmijeniti pravila za određeno računalo ili sva računala^(PCs) pod navedenom domenom i u ovom slučaju se to zove politika grupe^{(Group Policy)} .

Sada se uređivač grupnih pravila^{(Group Policy Editor)} također naziva gpedit.msc kao što ste možda primijetili gore, ali to je zato što je naziv datoteke uređivača grupnih pravila^{(Group Policy Editor)} gpedit.msc. No, nažalost, pravila grupe^{(Group Policy)} nisu dostupna za korisnike Windows 10 Home Edition , a dostupna su samo za izdanje Windows 10 Pro , Education ili Enterprise . Nepostojanje gpedit.msc u sustavu Windows 10^{(Windows 10)} veliki je nedostatak, ali ne brinite. U ovom ćete članku pronaći način da jednostavno omogućite ili instalirate uređivač grupnih pravila (gpedit.msc) na Windows 10 Home Edition.^{(install the Group Policy Editor (gpedit.msc) on Windows 10 Home Edition.)}

Za korisnike Windows 10 Home Edition , oni moraju napraviti promjene putem Registry Editora^{(Registry Editor)} , što je prilično težak zadatak za korisnika početnika. I svaki pogrešan klik može ozbiljno oštetiti vaše sistemske datoteke i može vam onemogućiti pristup vlastitom računalu. Dakle, bez gubljenja vremena, pogledajmo kako instalirati uređivač grupnih pravila^{(Install Group Policy Editor)} na Windows 10 Home uz pomoć dolje navedenog vodiča.

Instalirajte uređivač grupnih pravila (gpedit.msc) na Windows 10 Home Edition^{(Install Group Policy Editor (gpedit.msc) on Windows 10 Home Edition)}

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Prvo provjerite imate li na vašem računalu instaliran uređivač grupnih pravila ili ne. ^{(Group Policy Editor)}Pritisnite tipku Windows Key + R i to će otvoriti dijaloški okvir Pokreni^(Run) , sada upišite gpedit.msc i pritisnite Enter ili kliknite OK ako nemate instaliran gpedit.msc na vašem računalu, tada ćete vidjeti sljedeću poruku o pogrešci:

“ Windows ne može pronaći 'gpedit.msc'. Provjerite jeste li ispravno upisali naziv, a zatim pokušajte ponovno. ^{(Windows cannot find ‘gpedit.msc’. Make sure you typed the name correctly, and then try again.)}”

Sada je potvrđeno da nemate instaliran uređivač grupnih pravila^{(Group Policy Editor)} , pa nastavimo s vodičem.

Metoda 1: Instalirajte GPEdit paket u Windows 10 Home koristeći DISM^{(Method 1: Install GPEdit Package in Windows 10 Home Using DISM)}

1. Otvorite naredbeni redak^{(Command Prompt)} . Korisnik može izvršiti ovaj korak tražeći 'cmd' , a zatim pritisnite Enter.

2. Upišite sljedeću naredbu jednu po jednu i pritisnite Enter nakon svake:

FOR %F IN ("%SystemRoot%\servicing\Packages\Microsoft-Windows-GroupPolicy-ClientTools-Package~*.mum") DO (DISM /Online /NoRestart /Add-Package:"%F")

FOR %F IN ("%SystemRoot%\servicing\Packages\Microsoft-Windows-GroupPolicy-ClientExtensions-Package~*.mum") DO (DISM /Online /NoRestart /Add-Package:"%F")

3. Pričekajte^(Wait) da se naredba završi i to će instalirati pakete ClientTools i ClientExtensions^{( install the ClientTools and ClientExtensions packages)}  na Windows 10 Home.

Microsoft-Windows-GroupPolicy-ClientTools-Package~…~amd64~~….mum
Microsoft-Windows-GroupPolicy-ClientTools-Package~…~amd64~en-US~….mum
Microsoft-Windows-GroupPolicy-ClientExtensions-Package~…~amd64~~….mum
Microsoft-Windows-GroupPolicy-ClientExtensions-Package~…~amd64~en-US~….mum

4. Pritisnite tipku Windows + R zatim upišite gpedit.msc i pritisnite Enter da otvorite uređivač grupnih pravila^{(Group Policy Editor)} .

Napomena: Za uspješno pokretanje ^(Note:)uređivača grupnih pravila^{(Group Policy Editor)} nije potrebno ponovno pokretanje .

5. Time će se uspješno pokrenuti uređivač grupnih pravila^{(Group Policy Editor)} , a ovaj GPO je potpuno funkcionalan i sadrži sva potrebna pravila dostupna u izdanju Windows 10 Pro , Education ili Enterprise .

Metoda 2: Instalirajte uređivač grupnih pravila (gpedit.msc) pomoću programa za ^{(Method 2: Install Group Policy Editor (gpedit.msc) using )}instalaciju^{( installer)} treće strane

Napomena:^(Note:) Ovaj će članak koristiti instalacijski program ili zakrpu treće strane za instalaciju gpedit.msc na Windows 10 Home izdanje. Zasluge za ovu datoteku idu davehc-u jer ju je objavio na Windows7forumu^{(Windows7forum)} , a korisnik @jwills876 objavio ju je na DeviantArt -u .

1. Preuzmite uređivač grupnih pravila^{(Download Group Policy Editor)} (gpedit.msc) s ove veze^{(from this link)} .

2. Desnom tipkom miša kliknite preuzetu zip datoteku, a zatim odaberite Extract here.

3. Vidjet ćete Setup.exe gdje ste raspakirali arhivu.

4. Desnom tipkom miša kliknite Setup.exe i odaberite Pokreni kao administrator.^{(Run as Administrator.)}

5. Sada, bez zatvaranja datoteke za postavljanje, ako imate 64-bitni Windows , morat ćete slijediti korake u nastavku.

a. Zatim idite na mapu C:WindowsSysWOW64 i kopirajte sljedeće datoteke:

GroupPolicy
GroupPolicyUsers
gpedit.msc

b. Sada pritisnite tipku Windows Key + R zatim upišite %WinDir%\System32 i pritisnite Enter.

c. Zalijepite datoteke i mape koje ste kopirali u koraku 5.1^{(Paste the files & folders you copied in step 5.1)}  u mapu System32.

6. Nastavite s instalacijom, ali u zadnjem koraku nemojte kliknuti na Završi^(Finish) i ne zatvarajte instalacijski program.

7. Idite do mape C:\Windows\Temp\gpedit\ , zatim desnom tipkom miša kliknite x86.bat (za 32-bitne korisnike Windowsa) ili x64.bat (za 64 -bitne korisnike ^(Users)Windowsa^(Windows) ) i otvorite ga pomoću Notepad-a.^(Notepad.)

8. U Notepadu^(Notepad) ćete pronaći 6 linija nizova koji sadrže sljedeće:

%username%:f

9. Morate zamijeniti %username%:f s “%username%”:f (uključujući navodnike).

10. Kada završite, spremite datoteku i provjerite jeste li pokrenuli datoteku kao administrator.^{(run the file as Administrator.)}

11. Na kraju kliknite gumb Završi^(Finish) .

MMC za popravak nije mogao stvoriti pogrešku snap-in:^{(Fix MMC could not create the snap-in error:)}

1. Pritisnite tipku Windows + R, zatim upišite sysdm.cpl i pritisnite Enter da otvorite Svojstva ^(Properties)sustava^(System) .

2. Prijeđite na karticu Napredno^{( Advanced tab)} , a zatim kliknite na gumb “ Varijable okruženja^{(Environment Variables)} ” na dnu.

3. Sada u odjeljku Varijable sustava^{( System variables section)} , dvaput kliknite na " Put^(Path) ".

4. U prozoru Uredi varijablu okoline^{(Edit environment variable window)} kliknite na Novo.^(New.)

5. Upišite %SystemRoot%\System32\Wbem i pritisnite Enter.

6. Kliknite OK, a zatim ponovno kliknite OK.

Ovo bi trebalo ispraviti da MMC nije mogao stvoriti pogrešku snap-in,^{( fix MMC could not create the snap-in error)} ali ako ste još uvijek zapeli, slijedite ovaj vodič^{(follow this tutorial)} .

Metoda 3: Koristite Policy Plus (alat treće strane)^{(Method 3: Use Policy Plus (Third-party tool))}

Ako ne želite koristiti uređivač grupnih pravila^{(Group Policy Editor)} ili smatrate da je gornji vodič previše tehnički, ne brinite, možete jednostavno preuzeti i instalirati alat treće strane pod nazivom Policy Plus , alternativu Windows uređivaču grupnih pravila^{(Windows Group Policy Editor)} (gpedit.msc) . Uslužni program možete besplatno preuzeti s GitHuba^{(download the utility for free from the GitHub)} . Samo^(Just) preuzmite Policy Plus i pokrenite aplikaciju jer ne zahtijeva instalaciju.

Preporučeno:^{(Recommended:)}

• Očistite međuspremnik pomoću naredbenog retka ili prečaca^{(Clear Clipboard using Command Prompt or Shortcut)}
• Što je VPN i kako funkcionira?^{(What is a VPN, and how it works?)}
• Povećajte glasnoću mikrofona u sustavu Windows 10^{(Increase Microphone Volume in Windows 10)}
• Pokrenite Android aplikacije na računalu sa sustavom Windows^{(Run Android Apps on Windows PC)}

To je to što ste uspješno instalirali uređivač grupnih pravila (gpedit.msc) na Windows 10 Home Edition^{(Install Group Policy Editor (gpedit.msc) on Windows 10 Home Edition)} , ali ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih pitajte u odjeljku za komentare.

Install Group Policy Editor (gpedit.msc) on Windows 10 Home

The Locаl Group Policy Editor (gpedіt.msc) is a Windows tool used by Administrators to modify group рolicies. Group Policy is used by Windows domain administrators to mоdify Windows policies for all or а particular PC on the domain. With the helр of gpedit.msc, you can easily control whіch aрplicаtion can run by which users can lock down cеrtain featureѕ for particular users, restrict access to specific folders, modify Windows user іnterface and the list goes on.

Also, there is a difference between Local Group Policy and Group Policy. If your PC is not in any domain then the gpedit.msc can be used to edit policies that apply on the particular PC and in this case, it is called Local Group Policy. But if the PC is under a domain, the domain administrator can modify policies for a particular PC or all the PCs under the said domain and in this case, it is called Group Policy.

Now Group Policy Editor is also referred to as gpedit.msc as you may have noticed above, but this is because the filename of the Group Policy Editor is gpedit.msc. But sadly, Group Policy is not available for Windows 10 Home Edition users, and it’s only available for Windows 10 Pro, Education, or Enterprise edition. Not having gpedit.msc on Windows 10 is a huge drawback but don’t worry. In this article, you will find a way to easily enable or install the Group Policy Editor (gpedit.msc) on Windows 10 Home Edition.

For Windows 10 Home Edition users, they have to make changes through Registry Editor which is quite a task for a novice user. And any wrong click can seriously damage your system files and may lock you out of your own PC. So without wasting any time, let’s see How to Install Group Policy Editor on Windows 10 Home with the help of the below-listed tutorial.

Install Group Policy Editor (gpedit.msc) on Windows 10 Home Edition

Make sure to create a restore point just in case something goes wrong.

First, see if you have Group Policy Editor installed on your PC or not. Press Windows Key + R and this will bring up the Run dialog box, now type gpedit.msc and hit Enter or click OK if you don’t have the gpedit.msc installed on your PC then you will see the following error message:

“Windows cannot find ‘gpedit.msc’. Make sure you typed the name correctly, and then try again.”

Now it is confirmed that you don’t have Group Policy Editor installed, so let’s continue with the tutorial.

Method 1: Install GPEdit Package in Windows 10 Home Using DISM

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command one by one and hit Enter after each one:

FOR %F IN ("%SystemRoot%\servicing\Packages\Microsoft-Windows-GroupPolicy-ClientTools-Package~*.mum") DO (DISM /Online /NoRestart /Add-Package:"%F")

FOR %F IN ("%SystemRoot%\servicing\Packages\Microsoft-Windows-GroupPolicy-ClientExtensions-Package~*.mum") DO (DISM /Online /NoRestart /Add-Package:"%F")

3. Wait for the command to finish executing, and this will install the ClientTools and ClientExtensions packages on Windows 10 Home.

Microsoft-Windows-GroupPolicy-ClientTools-Package~…~amd64~~….mum
Microsoft-Windows-GroupPolicy-ClientTools-Package~…~amd64~en-US~….mum
Microsoft-Windows-GroupPolicy-ClientExtensions-Package~…~amd64~~….mum
Microsoft-Windows-GroupPolicy-ClientExtensions-Package~…~amd64~en-US~….mum

4. Press Windows Key + R then type gpedit.msc and hit Enter to open Group Policy Editor.

Note: No reboot is required to run Group Policy Editor successfully.

5. This will successfully launch Group Policy Editor, and this GPO is fully functional and contains all the necessary policies available in Windows 10 Pro, Education, or Enterprise edition.

Method 2: Install Group Policy Editor (gpedit.msc) using a third-party installer

Note: This article will use a third-party installer or patch to install gpedit.msc on Windows 10 Home edition. Credit for this file goes to davehc for posting it in Windows7forum, and user @jwills876 posted it on DeviantArt.

1. Download Group Policy Editor (gpedit.msc) from this link.

2. Right-click on the downloaded zip file then selects Extract here.

3. You will see a Setup.exe where you extracted the archive.

4. Right-click on the Setup.exe and select Run as Administrator.

5. Now, without closing the setup file, if you have 64-bit Windows, you will need to follow the below steps.

a. Next, navigate to C:\Windows\SysWOW64 folder and copy the following files:

GroupPolicy
GroupPolicyUsers
gpedit.msc

b. Now press Windows Key + R then type %WinDir%\System32 and hit Enter.

c. Paste the files & folders you copied in step 5.1 in the System32 folder.

6. Continue with the installation but at the last step, don’t click on Finish and don’t close the installer.

7. Navigate to C:\Windows\Temp\gpedit\ folder, then right-click on x86.bat (For 32bit Windows Users) or x64.bat (For 64bit Windows Users) and Open it with Notepad.

8. In the Notepad, you will find 6 string lines containing the following:

%username%:f

9. You need to replace %username%:f with “%username%”:f (Including the quotes).

10. Once finished, save the file and make sure to run the file as Administrator.

11. Finally, click on the Finish button.

Fix MMC could not create the snap-in error:

1. Press Windows Key + R then type sysdm.cpl and hit Enter to open System Properties.

2. Switch to Advanced tab then click on “Environment Variables” button at the bottom.

3. Now under the System variables section, double-click on “Path“.

4. On the Edit environment variable window, click on New.

5. Type %SystemRoot%\System32\Wbem and hit Enter.

6. Click OK then again click OK.

This should fix MMC could not create the snap-in error but if you’re still stuck then follow this tutorial.

Method 3: Use Policy Plus (Third-party tool)

If you don’t want to use Group Policy Editor or find the above tutorial too technical, don’t worry you can easily download and install a third-party tool called Policy Plus, an alternative to Windows Group Policy Editor (gpedit.msc). You can download the utility for free from the GitHub. Just download the Policy Plus and run the application as it doesn’t require installation.

Recommended:

• Clear Clipboard using Command Prompt or Shortcut
• What is a VPN, and how it works?
• Increase Microphone Volume in Windows 10
• Run Android Apps on Windows PC

That’s it you have successfully Install Group Policy Editor (gpedit.msc) on Windows 10 Home Edition but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 5 načina za otvaranje uređivača lokalnih grupnih pravila u sustavu Windows 10

• Kako omogućiti uređivač grupnih pravila u sustavu Windows 11 Home Edition

• Kako dodati uređivač lokalnih grupnih pravila na upravljačku ploču u sustavu Windows 10

• Što je uređivač grupnih pravila sustava Windows 10?

• Popravite Nemogućnost instalacije DirectX-a na Windows 10

• Popravite Alt+Tab koji ne radi u sustavu Windows 10

• Sakrij stavke s upravljačke ploče u sustavu Windows 10

• Preusmjerite web-mjesta iz IE-a na Microsoft Edge pomoću pravila grupe u sustavu Windows 10

• Kako napraviti čistu instalaciju sustava Windows 10

• Kako promijeniti svjetlinu zaslona u sustavu Windows 10

• Kako preuzeti, instalirati i koristiti WGET za Windows 10

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• Kako omogućiti ili onemogućiti Emoji ploču u sustavu Windows 10

• 3 načina za povećanje namjenskog VRAM-a u sustavu Windows 10

• Kako onemogućiti vatrozid za Windows 10

• Kako postaviti dijeljenje mrežnih datoteka u sustavu Windows 10

• Kako provjeriti grupna pravila primijenjena na računalu sa sustavom Windows 10

• Kako resetirati postavke grupnih pravila u sustavu Windows 10

• Preuzmite i instalirajte DirectX na Windows 10

• Kako stvoriti sigurnosnu kopiju slike sustava u sustavu Windows 10