Kada koristite Boot Camp Assistant na svom macOS-u, ako dobijete poruku o pogrešci — Formatirajte USB pogon kao jednu FAT particiju^{(Please format the USB drive as single FAT partition)} , tada će vam ovaj post pomoći riješiti problem. Neki od korisnika foruma izvijestili su da iako su USB diskovi formatirani više puta pomoću uslužnog programa za disk kao FAT , uvijek se zaglavio na ekranu gdje je potrebno odabrati odredišni disk.

Molimo^(Please) formatirajte USB pogon kao jednu FAT particiju

Ovdje je problem u tome što prilikom formatiranja USB pogona pomoću uslužnog programa treće strane ne  snima MBR , što je potrebno Boot Camp Assistantu^{(Boot Camp Assistant)} . Kada formatirate USB pogon kao FAT , MBR nije dostupan. Dakle, rješenje je formatirati pogon s Master Boot Record ili MBR . Ali prije nego što nastavimo, evo jedne stvari koju trebate provjeriti.

• Koristite Spotlight^{(Use Spotlight)} pretraživanje da otvorite Disk Utility
• Odaberite USB pogon i provjerite imate li akcijski gumb na vrhu uslužnog programa koji kaže Partition
• Ako piše nešto drugo osim MBR , onda imamo problem.

Slijedite korake na svom macOS-u za formatiranje pomoću MBR + FAT32

1] Zabilježite naziv USB pogona koji je spojen na Mac. Trebao bi biti dostupan izravno na radnoj površini.

2] Pritisnite^(Press) naredbu i razmaknicu da otvorite reflektor. Upišite^(Type) terminal i kada se pojavi pritisnite tipku Enter da biste ga otvorili.

3] Upišite diskutil list  u terminal i pritisnite tipku enter. Trebali biste vidjeti izlaz svih povezanih pogona. Jedan od njih bit će USB disk. Možete ga identificirati imenom. U mom slučaju, nazvao sam ga AshishUSB.

   /dev/disk4 (external, physical):

   #: TYPE               NAME                   SIZE       IDENTIFIER

   0: GUID_partition_scheme     *16.2 GB    disk4
                  EFI EFI       
   1: Microsoft Basic Data AshishUSB        16.2 GB    disk4s1

Pažljivo zabilježite putanju USB pogona,^{(note the path of the USB drive,)} što je u mom slučaju /dev/disk4. To će nam trebati u našem sljedećem koraku.

4] Na terminalu izvedite sljedeću naredbu za formatiranje USB - a s MBR -om .

diskutil partitionDisk /dev/disk4 1 MBR fat32 ASHISHNEW 16GB

Evo kako izlaz stvara mapu particije i aktivira je.

• Počelo s particioniranjem na disku4
• Demontiranje diska
• Izrada mape particija
• Čeka se aktiviranje particija
• Formatiranje disk4s1 kao MS-DOS ( FAT32 ) s imenom ASHISHNEW
• 512 bajtova po fizičkom sektoru
• /dev/rdisk4s1: 31670032 sektora u 1979377 FAT32 klastera (8192 bajta/klaster)
• bps=512 spc=16 res=32 nft=2 mid=0xf8 spt=32 hds=255 hid=2048 drv=0x80 bsec=31700992 bspf=15464 rdcl=2 infs=1 bkbs=6
• Montažni disk
• Završeno particioniranje na disku4

/dev/disk4 (external, physical):

   #:  TYPE NAME             SIZE       IDENTIFIER

   0: FDisk_partition_scheme *16.2 GB    disk4

   1: DOS_FAT_32 ASHISHNEW   16.2 GB    disk4s1

Posljednji izlaz je ono što čini razliku. U ovom izlazu postoje dva čvora — DeviceNodes: 0, tipa FDisk_partition_scheme , i 1, tipa DOS_FAT_32 . Budući da smo koristili MBR fat32 kao parametar, tako ćemo umjesto GUID -a imati ^(GUID)MBR .

Sada kada ponovno pokrenete Boot Camp Assistant , nećete dobiti pogrešku — formatirajte USB pogon kao jednu FAT particiju^{(Please format the USB drive as single FAT partition)} .

Nedavno smo razgovarali o stvaranju USB diska za pokretanje sustava Windows 10 pomoću macOS^{(Windows 10 Bootable USB drive using macOS)} -a, a ako se suočite sa sličnom pogreškom, sada znate što trebate učiniti.

Please format the USB drive as single FAT partition: Boot Camp Assistant

When uѕing Boot Camp Asѕistant on your macOS, if уou receive an error saying — Please format the USB drive as single FAT partition, then this post will help you resolve the problem. Some of the forum users have reported that even though the USB drives were formatted multiple times using the disk utility as FAT, it always got stuck on the screen where one needs to select destination disk.

Please format the USB drive as single FAT partition

The problem here is that when formating USB drive using third party utility doesn’t  MBR record, which is needed by the Boot Camp Assistant. When formatting a USB drive as FAT, there is no MBR available. So the solution is to format the drive with Master Boot Record or MBR. But before we go ahead, here is one thing you need to check.

• Use Spotlight search to open Disk Utility
• Select the USB drive, and see if you have an action button on top of the utility which says Partition
• If it says anything other than MBR, then we have a problem.

Follow the steps on your macOS to format with MBR + FAT32

1] Note the name of the USB drive, which is connected to the mac. It should be available right on the desktop.

2] Press command and space bar to open the spotlight. Type terminal, and when it appears, press the Enter key to open it.

3] Type diskutil list in the terminal, and press the enter key. You should see an output of all connected drives. One of these will be the USB drive. You can identify it with the name. In my case, I had named it AshishUSB.

   /dev/disk4 (external, physical):

   #: TYPE               NAME                   SIZE       IDENTIFIER

   0: GUID_partition_scheme     *16.2 GB    disk4
                  EFI EFI       
   1: Microsoft Basic Data AshishUSB        16.2 GB    disk4s1

Carefully note the path of the USB drive, which in my case is /dev/disk4. We will need that in our next step.

4] On the terminal, execute the following command to format the USB with MBR.

diskutil partitionDisk /dev/disk4 1 MBR fat32 ASHISHNEW 16GB

Here is how the output where it creates the partition map and activates it.

• Started partitioning on disk4
• Unmounting disk
• Creating the partition map
• Waiting for partitions to activate
• Formatting disk4s1 as MS-DOS (FAT32) with name ASHISHNEW
• 512 bytes per physical sector
• /dev/rdisk4s1: 31670032 sectors in 1979377 FAT32 clusters (8192 bytes/cluster)
• bps=512 spc=16 res=32 nft=2 mid=0xf8 spt=32 hds=255 hid=2048 drv=0x80 bsec=31700992 bspf=15464 rdcl=2 infs=1 bkbs=6
• Mounting disk
• Finished partitioning on disk4

/dev/disk4 (external, physical):

   #:  TYPE NAME             SIZE       IDENTIFIER

   0: FDisk_partition_scheme *16.2 GB    disk4

   1: DOS_FAT_32 ASHISHNEW   16.2 GB    disk4s1

The last output is what makes the difference. In this output, there are two nodes—DeviceNodes: 0, of type FDisk_partition_scheme, and 1, of type DOS_FAT_32.  Since we have used MBR fat32 as a parameter, so we will have MBR instead of GUID.

Now when you run the Boot Camp Assistant again, you will not receive the error — Please format the USB drive as single FAT partition.

We recently talked about creating Windows 10 Bootable USB drive using macOS, and if you face a similar error, now you know what should be done.

Related posts

• Riješite probleme s Boot Camp Assistantom na Macu

• FaceTime kamera ne radi u sustavu Windows 10 s Boot Campom

• Kako ukloniti Boot Camp Services iz Windowsa na Macu

• Boot Camp se nije mogao prebaciti između Windowsa i Mac OS-a

• Kako koristiti Windows 7 s Boot Campom

• Kako pokrenuti Mac u sigurnom načinu rada

• Pretvorite Mac font u font kompatibilan sa sustavom Windows pomoću DfontSplittera

• Kako potisnuti upozorenje AutoDiscover Redirect u Outlooku za Mac

• 5 načina da popravite da se Safari neće otvoriti na Macu

• Kako otvoriti Apple Numbers datoteku u Excelu na Windows računalu

• Nabavite Mac font za Windows koristeći MacType ili GDIPP

• Kako instalirati Windows 11 u macOS Monterey pomoću Boot Campa

• Besplatni alati za promjenu MAC adrese za Windows 11/10

• Windows 11/10 zaglavio na zaslonu Molimo pričekajte

• Sustav zahtijeva da se prijavite na važeći račun, 0xD000000C

• Sinkronizirate drugu pogrešku računa u OneDrive za Mac

• OneDrive prestaje sinkronizirati - prikazuje pogrešku sinkronizacije .ds_store

• Kako prenijeti datoteke i podatke s Windows PC-a na Mac

• 15 popravaka koje možete isprobati kada se vaš Mac ne uključuje ili ne pokreće

• Fix Photoshop Scratch Diskovi su potpuni problem na Windows i Mac