Ako se suočavate s problemom gdje se vaše Windows 10 računalo ne može automatski povezati na spremljenu WiFi mrežu iako ste ispravno konfigurirali mrežu za automatsko povezivanje, ne brinite jer ćemo danas vidjeti kako to popraviti problem. Problem je u tome što kada pokrenete računalo, WiFi se ne povezuje automatski u sustavu Windows 10^{(Windows 10)} i morate ručno tražiti dostupne mreže, a zatim odabrati spremljenu mrežnu vezu i pritisnuti Connect . Ali WiFi bi se trebao automatski povezati jer ste označili okvir "Automatsko povezivanje".

Pa, nema posebnog razloga za ovaj problem, ali to može biti uzrokovano jednostavnom nadogradnjom sustava nakon koje se WiFi adapter isključuje radi uštede energije i morate promijeniti postavke natrag na normalne kako biste riješili problem. Dakle, bez gubljenja vremena, pogledajmo Kako popraviti da se WiFi^{(Fix WiFi)} ne povezuje automatski u sustavu Windows 10^{(Windows 10)} uz pomoć dolje navedenog vodiča za rješavanje problema.

Fix WiFi ne povezuje se automatski u sustavu Windows 10^{(Windows 10)}

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Zaboravite svoju WiFi mrežu^{(Method 1: Forget your WiFi Network)}

1.Kliknite ikonu Bežična^(Wireless) veza u traci sustava, a zatim kliknite Mrežne postavke.^{(Network Settings.)}

2. Zatim kliknite na Upravljanje poznatim mrežama^{( Manage Known networks)} da biste dobili popis spremljenih mreža.

3. Sada odaberite onu za koju Windows 10 neće zapamtiti lozinku i kliknite Zaboravi.^{(click Forget.)}

4. Ponovo kliknite ikonu bežične veze^{( wireless icon)} u traci sustava i povežite se na svoju mrežu, tražit će lozinku, stoga provjerite imate li kod sebe lozinku za bežičnu^(Wireless) vezu .

5. Nakon što unesete lozinku, spojit ćete se na mrežu i Windows će spremiti ovu mrežu za vas.

6. Ponovno pokrenite računalo i ponovno se pokušajte spojiti na istu mrežu. Čini se da ova metoda  popravlja da se WiFi ne povezuje automatski u sustavu Windows 10.^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

Metoda 2: Prilagodite postavke upravljanja napajanjem WiFi adaptera^{(Method 2: Adjust WiFi Adapter Power Management Settings)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter.

2.Proširite Mrežni adapteri^{( Network adapters)} , a zatim desnom tipkom miša kliknite instalirani mrežni adapter i odaberite Svojstva.^{(Properties.)}

3. Prebacite se na karticu Upravljanje napajanjem^{(Power Management Tab)} i obavezno poništite opciju^(uncheck) " Dopusti računalu da isključi ovaj uređaj radi uštede energije. ^{(Allow the computer to turn off this device to save power.)}”

4. Kliknite U redu i zatvorite Upravitelj uređaja^{(Device Manager)} .

5. Sada pritisnite tipku Windows Key + I za otvaranje postavki, a zatim Click System > Power & Sleep.

6. Na dnu kliknite Dodatne postavke napajanja.^{(click Additional power settings.)}

7. Sada kliknite " Promijeni postavke plana^{(Change plan settings)} " pored plana napajanja koji koristite.

8. Pri dnu kliknite na " Promijeni napredne postavke napajanja. ^{(Change advanced power settings.)}”

9.Proširite postavke bežičnog adaptera^{( Wireless Adapter Settings)} , zatim ponovno proširite Način rada za uštedu energije.^{(Power Saving Mode.)}

10. Zatim ćete vidjeti dva načina rada, 'Na bateriju' i 'Uključeno'. Promijenite^(Change) oba na Maximum Performance.

11. Kliknite Primijeni^(Apply) , a zatim U redu. Ponovno pokrenite^{(Ok. Reboot)} računalo da biste spremili promjene.

Metoda 3: Vratite upravljačke programe mrežnog adaptera^{(Method 3: Roll Back Network Adapter Drivers)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite Mrežni adapter^{(Network Adapter)}  i zatim desnom tipkom miša kliknite svoj bežični adapter^{(Wireless Adapter)}  i odaberite Svojstva.^{(Properties.)}

3. Prijeđite na karticu Driver^{(Driver tab)} i kliknite na Vrati upravljački program.^{(Roll Back Driver.)}

4. Odaberite Yes/OK za nastavak vraćanja upravljačkog programa.

5. Nakon što je vraćanje završeno, ponovno pokrenite računalo.

Provjerite možete li popraviti da se WiFi ne povezuje automatski u sustavu Windows 10^{(Fix WiFi doesn’t connect automatically in Windows 10)} , ako ne, nastavite sa sljedećom metodom.

Metoda 4: Pokrenite alat za rješavanje problema s mrežom^{(Method 4: Run Network Troubleshooter)}

1. Desnom tipkom miša kliknite ikonu mreže i odaberite Rješavanje problema.^{( Troubleshoot problems.)}

2. Slijedite upute na zaslonu.

3. Sada pritisnite tipku Windows key + W i upišite Rješavanje problema^{( Troubleshooting)} pritisnite enter.

4. Odavde odaberite " Mreža i Internet. ^{(Network and Internet.)}”

5. Na sljedećem zaslonu kliknite na Mrežni adapter.^{(Network Adapter.)}

6. Slijedite upute na zaslonu da biste popravili da se WiFi ne povezuje automatski u sustavu Windows 10.^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

Metoda 5: Deinstalirajte upravljački program mrežnog adaptera^{(Method 5: Uninstall Network Adapter Driver)}

1. Pritisnite tipku Windows + R zatim upišite “ devmgmt.msc ” i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite Mrežni adapteri i pronađite naziv svog mrežnog adaptera.^{(your network adapter name.)}

3. Obavezno zabilježite naziv adaptera^{(note down the adapter name)} za slučaj da nešto pođe po zlu.

4. Desnom tipkom miša kliknite mrežni adapter i deinstalirajte ga.

5. Ako tražite potvrdu , odaberite Da.^{( select Yes.)}

6. Ponovo pokrenite računalo i pokušajte se ponovno povezati s mrežom.

7. Ako se ne možete povezati na svoju mrežu, to znači da softver upravljačkog programa^{(driver software)} nije automatski instaliran.

8. Sada trebate posjetiti web-mjesto svog proizvođača i od tamo preuzeti upravljački program^{(download the driver)} .

9.Instalirajte upravljački program i ponovno pokrenite računalo.

Ponovnom instalacijom mrežnog adaptera možete  popraviti da se WiFi ne povezuje automatski u sustavu Windows 10.^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

Metoda 6: Ažurirajte upravljačke programe mrežnog adaptera^{(Method 6: Update Network Adapter Drivers)}

1. Pritisnite tipku Windows + R i upišite “ devmgmt.msc ” u dijaloški okvir Pokreni da biste otvorili upravitelj uređaja.^{(device manager.)}

2.Proširite Mrežni adapteri^{(Network adapters)} , zatim desnom tipkom miša kliknite svoj Wi-Fi kontroler^{( Wi-Fi controller)} (na primjer Broadcom ili Intel ) i odaberite Ažuriraj upravljačke programe.^{(Update Drivers.)}

3. U Windows ažuriranju softvera upravljačkog programa^{(Update Driver Software Windows)} odaberite “ Pregledaj moje računalo za softver upravljačkog programa. ^{(Browse my computer for driver software.)}”

4. Sada odaberite " Pusti me da odaberem s popisa upravljačkih programa uređaja na mom računalu. ^{(Let me pick from a list of device drivers on my computer.)}”

5. Pokušajte ažurirati upravljačke programe s navedenih verzija.^{(update drivers from the listed versions.)}

6. Ako gore navedeno ne radi, idite na web-mjesto proizvođača^{(the manufacturer’s website)} da ažurirate upravljačke programe: https://downloadcenter.intel.com/

7. Ponovo pokrenite da biste primijenili promjene.

Metoda 7: Izbrišite Wlansvc datoteke^{(Method 7: Delete Wlansvc Files)}

1. Pritisnite tipku Windows + R zatim upišite services.msc i pritisnite Enter.

2. Pomičite se prema dolje dok ne pronađete WWAN AutoConfig , a zatim ga desnom tipkom miša kliknite i odaberite Stop .

3. Opet pritisnite tipku Windows Key + R zatim upišite “ C:\ProgramData\Microsoft\Wlansvc\ ” (bez navodnika) i pritisnite Enter.

4. Izbrišite sve (najvjerojatnije mapu MigrationData ) u mapi Wlansvc osim profila.^{(Wlansvc folder except for profiles.)}

5. Sada otvorite mapu Profili^(Profiles) i izbrišite sve osim sučelja.^{( Interfaces.)}

6.Slično, otvorite mapu Interfaces i izbrišite sve u njoj.

7. Zatvorite File Explorer , zatim u prozoru usluga kliknite desnom tipkom miša na WLAN AutoConfig i odaberite Start.

Metoda 8: Onemogućite virtualni adapter Microsoft Wi-Fi Direct^{(Method 8: Disable Microsoft Wi-Fi Direct Virtual Adapter)}

1. Pritisnite tipku Windows + R zatim upišite devmgmt.msc i pritisnite Enter da otvorite Upravitelj uređaja^{(Device Manager)} .

2.Proširite Mrežni^(Network) adapteri, zatim kliknite na View i odaberite Show hidden devices.

3. Desnom tipkom miša kliknite Microsoft Wi-Fi Direct Virtual Adapter i odaberite Onemogući.^(Disable.)

4. Ponovo pokrenite računalo da biste spremili promjene.

Method 9: Install Intel PROSet/Wireless Software

Ponekad je problem uzrokovan zastarjelim softverom Intel PROSet^{(Intel PROSet Software)} , pa se čini da njegovo ažuriranje popravlja nedostatak mrežnog adaptera u sustavu Windows 10^{(Fix Network Adapter Missing in Windows 10)} . Stoga idite ovdje^{(go here)} i preuzmite najnoviju verziju  PROSet/Wireless Software i instalirajte je. Ovo je softver treće strane koji upravlja vašom WiFi vezom umjesto Windowsa^(Windows) i ako PROset/Wireless Software zastario može uzrokovati problem s upravljačkim programima u  bežičnom mrežnom adapteru. ^{(Wireless Network Adapter.)}Pročitajte Kako ažurirati upravljačke programe mrežnog adaptera na sustavu Windows 10.^{(How to Update Network Adapter Drivers on Windows 10.)} Pročitajte kako ažurirati upravljačke programe mrežnog adaptera na sustavu Windows 10.^{(How to Update Network Adapter Drivers on Windows 10.)}

Metoda 10: popravak registra^{(Method 10: Registry Fix)}

Napomena: Obavezno napravite sigurnosnu kopiju Registra^{(backup Registry)} za slučaj da nešto pođe po zlu.

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WcmSvc

3. Proširite WcmSvc^(WcmSvc) u lijevom oknu i pogledajte ima li ključ GroupPolicy^{( GroupPolicy key)} , ako ne, kliknite desnom tipkom miša na WcmSvc i odaberite New > Key.

4. Imenujte ovaj novi ključ kao GroupPolicy i pritisnite Enter.

5. Sada desnom tipkom miša kliknite GroupPolicy i odaberite New > DWORD (32-bit) value.

6. Dalje, nazovite ovaj novi ključ kao fMinimizeConnections i pritisnite Enter.

7. Ponovno pokrenite računalo da biste spremili promjene.

Metoda 11: Onemogućite brzo pokretanje^{(Method 11: Disable Fast Startup)}

1. Pritisnite Windows Key + R zatim upišite control i pritisnite Enter da otvorite upravljačku ploču.^{(Control Panel.)}

2. Kliknite na Hardver i zvuk,^{(Hardware and Sound)} a zatim kliknite na Mogućnosti napajanja^{(Power Options)} .

3. Zatim u lijevom oknu prozora odaberite " Odaberite što rade tipke za napajanje. ^{(Choose what the power buttons do.)}”

4. Sada kliknite na “ Promijeni postavke koje trenutno nisu dostupne. ^{(Change settings that are currently unavailable.)}”

5.Poništite odabir " Uključi brzo pokretanje^{(Turn on fast startup)} " i kliknite na Spremi promjene.

6. Ponovo pokrenite računalo da biste spremili promjene i provjerite možete li popraviti da se WiFi ne povezuje automatski jer se opcija WiFi ne prikazuje u sustavu Windows 10^{(WiFi Option Not Showing in Windows 10)( Fix WiFi doesn’t connect automatically as WiFi Option Not Showing in Windows 10)} .

Metoda 12: Pokrenite SFC i DISM^{(Method 12: Run SFC and DISM)}

1. Pritisnite Windows Key + X , a zatim kliknite na Command Prompt (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3. Pričekajte da se gornji proces završi i nakon završetka ponovno pokrenite računalo.

4. Opet otvorite cmd i upišite sljedeću naredbu i pritisnite enter nakon svake:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5. Pustite naredbu DISM da se pokrene i pričekajte da završi.

6. Ako gornja naredba ne radi, pokušajte s donjim:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Napomena: ^(Note:) Zamijenite^(Replace) C:RepairSourceWindows lokacijom vašeg izvora popravka ( Instalacijski disk za Windows^{(Windows Installation)} ili disk za oporavak^{(Recovery Disc)} ).

7. Ponovno pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Popravak Nije moguće postaviti zadanu pogrešku pisača 0x00000709^{(Fix Unable to Set Default Printer Error 0x00000709)}
• Popravite da mikrofon ne radi u sustavu Windows 10^{(Fix Microphone Not Working on Windows 10)}
• Uklonite Candy Crush Soda Saga iz sustava Windows 10^{(Remove Candy Crush Soda Saga from Windows 10)}
• Kako mapirati mrežni pogon u sustavu Windows 10^{(How to Map Network Drive in Windows 10)}

To je to što ste uspješno popravili. Popravak WiFi se ne povezuje automatski u sustavu Windows 10^{(Fix WiFi doesn’t connect automatically in Windows 10)} , ali ako i dalje imate pitanja u vezi s ovim člankom, slobodno ih postavite u odjeljku za komentare.

Fix WiFi does not connect automatically in Windows 10

If you’re facing the issυe where your Windows 10 PC is not able to connect to the saved WiFi network automaticallу even though you have properly confіgured the network to connect automatically then don’t worry as today we arе going to see how to fix this issue. The problem is when yoυ start yoυr PC, the WiFi doesn’t connect automatically in Windows 10 and you hаve to manually look for available networks then select your saved network connection and press Connect. But the WiFi shoυld connect automatically as you have checked the box “Automatically connect”.

Well, there is no particular cause for this issue but this can be caused by a simple system upgrade after which the WiFi Adapter is turned off to save power and you need to alter the settings back to normal to fix the issue. So without wasting any time let’s see How to Fix WiFi doesn’t connect automatically in Windows 10 with the help of the below-listed troubleshooting guide.

Fix WiFi doesn’t connect automatically in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Forget your WiFi Network

1.Click on the Wireless icon in the system tray and then click Network Settings.

2.Then click on Manage Known networks to get the list of saved networks.

3.Now select the one which Windows 10 won’t remember the password for and click Forget.

4.Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password with you.

5.Once you have entered the password you will connect to the network and Windows will save this network for you.

6.Reboot your PC and again try to connect to the same network. This method seems to Fix WiFi doesn’t connect automatically in Windows 10.

Method 2: Adjust WiFi Adapter Power Management Settings

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

2.Expand Network adapters then right-click on your installed network adapter and select Properties.

3.Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.”

4.Click Ok and close the Device Manager.

5.Now press Windows Key + I to open Settings then Click System > Power & Sleep.

6.On the bottom click Additional power settings.

7.Now click “Change plan settings” next to the power plan which you use.

8.At the bottom click on “Change advanced power settings.”

9.Expand Wireless Adapter Settings, then again expand Power Saving Mode.

10.Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.

11.Click Apply followed by Ok. Reboot your PC to save changes.

Method 3: Roll Back Network Adapter Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network Adapter and then right-click on your Wireless Adapter and select Properties.

3.Switch to the Driver tab and click on Roll Back Driver.

4.Choose Yes/OK to continue with driver rollback.

5.After the rollback is complete, reboot your PC.

See if you’re able to Fix WiFi doesn’t connect automatically in Windows 10, if not then continue with the next method.

Method 4: Run Network Troubleshooter

1.Right-click on the network icon and select Troubleshoot problems.

2.Follow the on-screen instructions.

3.Now press Windows key + W and type Troubleshooting hit enter.

4.From there select “Network and Internet.”

5.In the next screen click on Network Adapter.

6.Follow the on-screen instruction to Fix WiFi doesn’t connect automatically in Windows 10.

Method 5: Uninstall Network Adapter Driver

1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.

2.Expand Network Adapters and find your network adapter name.

3.Make sure you note down the adapter name just in case something goes wrong.

4.Right-click on your network adapter and uninstall it.

5.If ask for confirmation select Yes.

6.Restart your PC and try to reconnect to your network.

7.If you’re not able to connect to your network then it means the driver software isn’t automatically installed.

8.Now you need to visit your manufacturer’s website and download the driver from there.

9.Install the driver and reboot your PC.

By reinstalling the network adapter, you can Fix WiFi doesn’t connect automatically in Windows 10.

Method 6: Update Network Adapter Drivers

1.Press Windows key + R and type “devmgmt.msc” in the Run dialogue box to open device manager.

2.Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.

3.In the Update Driver Software Windows, select “Browse my computer for driver software.”

4.Now select “Let me pick from a list of device drivers on my computer.”

5.Try to update drivers from the listed versions.

6.If the above didn’t work then go to the manufacturer’s website to update drivers: https://downloadcenter.intel.com/

7.Reboot to apply changes.

Method 7: Delete Wlansvc Files

1.Press Windows Key + R then type services.msc and hit Enter.

2.Scroll down till you find WWAN AutoConfig then right-click on it and select Stop.

3.Again press Windows Key + R then type “C:\ProgramData\Microsoft\Wlansvc\” (without quotes) and hit Enter.

4.Delete everything (most probably the MigrationData folder) in the Wlansvc folder except for profiles.

5.Now open the Profiles folder and delete everything except the Interfaces.

6.Similarly, open the Interfaces folder then delete everything inside it.

7.Close File Explorer, then in services window right-click on WLAN AutoConfig and select Start.

Method 8: Disable Microsoft Wi-Fi Direct Virtual Adapter

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters then click on View and select Show hidden devices.

3.Right-click on Microsoft Wi-Fi Direct Virtual Adapter and select Disable.

4.Reboot your PC to save changes.

Method 9: Install Intel PROSet/Wireless Software

Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to Fix Network Adapter Missing in Windows 10. Therefore, go here and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Read How to Update Network Adapter Drivers on Windows 10. Read How to Update Network Adapter Drivers on Windows 10.

Method 10: Registry Fix

Note: Make sure to backup Registry just in case something goes wrong.

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WcmSvc

3.Expand WcmSvc in the left pane and see if it has GroupPolicy key, if not then right-click on WcmSvc and select New > Key.

4.Name this new key as GroupPolicy and hit Enter.

5.Now right-click on GroupPolicy and select New > DWORD (32-bit) value.

6.Next, name this new key as fMinimizeConnections and hit Enter.

7.Reboot your PC to save changes.

Method 11: Disable Fast Startup

1.Press Windows Key + R then type control and hit Enter to open Control Panel.

2.Click on Hardware and Sound then click on Power Options.

3.Then from the left window pane select “Choose what the power buttons do.”

4.Now click on “Change settings that are currently unavailable.”

5.Uncheck “Turn on fast startup” and click on Save changes.

6.Reboot your PC to save changes and see if you’re able to Fix WiFi doesn’t connect automatically as WiFi Option Not Showing in Windows 10.

Method 12: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes.

Recommended:

• Fix Unable to Set Default Printer Error 0x00000709
• Fix Microphone Not Working on Windows 10
• Remove Candy Crush Soda Saga from Windows 10
• How to Map Network Drive in Windows 10

That’s it you have successfully Fix WiFi doesn’t connect automatically in Windows 10 but if you still have any questions regarding this article then feel free to ask them in the comment’s section.

Related posts

• Popravite da WiFi ne radi u sustavu Windows 10 [100% radi]

• Ikona Popravi WiFi je zasivljena u sustavu Windows 10

• Popravite 5GHz WiFi koji se ne prikazuje u sustavu Windows 10

• Popravi DHCP nije omogućen za WiFi u sustavu Windows 10

• Popravite ograničeni pristup ili WiFi bez povezivanja na Windows 10

• Popravite nedostatak ikone na radnoj površini u sustavu Windows 10

• Popravite ikonu WiFi koja nedostaje na traci zadataka u sustavu Windows 10

• Popravite problem s tipkovnicom koja ne tipka u sustavu Windows 10

• Ispravite pogrešku Class Not Registered u sustavu Windows 10

• Popravite kalkulator koji ne radi u sustavu Windows 10

• Popravite Spotify koji se ne otvara u sustavu Windows 10

• Popravite aplikacije koje izgledaju mutno u sustavu Windows 10

• Ispravite grešku s uređajem nije migriran u sustavu Windows 10

• Popravite kako računalo neće ići u stanje mirovanja u sustavu Windows 10

• Popravi zaključavanje rotacije zasivljeno u sustavu Windows 10

• Popravite nedostatak upravljačke ploče NVIDIA u sustavu Windows 10

• Fix WiFi ne radi nakon nadogradnje na Windows 10

• Popravite Nemogućnost instalacije DirectX-a na Windows 10

• Popravite crnu pozadinu radne površine u sustavu Windows 10

• Popravite Microsoft Office koji se ne otvara u sustavu Windows 10