Korisnici sustava Windows 10 prijavili su novi problem u kojem kada odaberete datoteke ili mape u File Exploreru^{(File Explorer)} , te datoteke i mape neće biti istaknute iako su te datoteke i mape odabrane, ali nisu istaknute, pa je nemoguće odrediti koja je od njih odabrani ili koji nisu.

To je vrlo frustrirajući problem jer to onemogućuje rad s datotekama i mapama u sustavu Windows 10^{(Windows 10)} . U svakom slučaju^(Anyway) , tu je alat za rješavanje problema koji će riješiti ovaj problem pa bez gubljenja vremena pogledajmo kako zapravo riješiti ovaj problem u sustavu Windows 10^{(Windows 10)} s dolje navedenim koracima za rješavanje problema.

Fix File Explorer ne ističe odabrane datoteke ili mape

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Ponovno pokrenite Windows File Explorer iz upravitelja zadataka^{(Method 1: Restart Windows File Explorer from the Task Manager)}

1. Pritisnite Ctrl + Shift + Esc da otvorite Upravitelj zadataka.^{( Task Manager.)}

2. Sada pronađite Windows Explorer na popisu procesa.

3. Desnom tipkom miša kliknite Windows Explorer i odaberite Završi zadatak.^{(End Task.)}

4. Time ćete zatvoriti File Explorer i kako biste ga ponovno pokrenuli, kliknite File > Run new task.

5. U dijaloški okvir upišite Explorer.exe i pritisnite OK.^{(Explorer.exe)}

Ovo će ponovno pokrenuti Windows Explorer , ali ovaj korak samo privremeno rješava problem.

Metoda 2: Izvršite potpuno isključivanje^{(Method 2: Perform a Full Shutdown)}

1. Pritisnite tipku Windows Key + X , a zatim odaberite Command Prompt (Admin).

2. Upišite sljedeću naredbu u cmd i pritisnite Enter :

shutdown /s /f /t 0

3. Pričekajte^(Wait) nekoliko minuta jer potpuno gašenje traje duže od normalnog isključivanja.

4. Nakon što se računalo potpuno isključi, ponovno ga pokrenite. ^{(restart it. )}

Ovo bi trebalo  popraviti File Explorer ne ističe odabrane datoteke ili mape^{(Fix File Explorer does not highlight selected files or folders)} , ali ako još uvijek zaglavite na ovom problemu, slijedite nastavak na sljedeću metodu.

Metoda 3: Uključite i isključite način rada visokog kontrasta^{(Method 3: Toggle High Contrast mode on and off)}

Jednostavan popravak za File Explorer ne ističe odabrane datoteke ili mape. Problem bi bio uključivanje i isključivanje načina visokog kontrasta^{( toggling High Contrast mode on and off)} . Da biste to učinili, pritisnite left Alt + left Shift + Print Screen; a skočni prozor će pitati „ Želite li uključiti način rada visokog kontrasta? ^{(“Do you want to turn on high contrast mode?)}” odaberite Da. ^{(select Yes.)}Nakon što je način visokog kontrasta ponovno omogućen, pokušajte odabrati datoteku i mape i provjerite možete li ih istaknuti. Ponovno^(Again) onemogućite način rada visokog^(High) kontrasta pritiskom na left Alt + left Shift + Print Screen.

Metoda 4: Promijenite ispuštanje pozadine^{(Method 4: Change Background Drop)}

1. Desnom tipkom miša kliknite radnu površinu^(Desktop) i odaberite Personalize.

2. Pod Pozadina odabire Puna boja.^{(Background selects Solid Color.)}

3. Ako već imate jednobojnu pozadinu, odaberite bilo koju drugu boju.

4. Ponovo pokrenite računalo da biste spremili promjene i to bi trebalo biti u mogućnosti  popraviti File Explorer ne ističe odabrane datoteke ili mape.^{(Fix File Explorer does not highlight selected files or folders.)}

Metoda 5: Onemogućite brzo pokretanje^{(Method 5: Disable Fast Startup)}

1. Pritisnite tipku Windows + R, a zatim upišite powercfg.cpl i pritisnite enter da otvorite Mogućnosti napajanja^{(Power Options)} .

2. Kliknite na Odaberi što tipke za napajanje rade^{(Choose what the power buttons do)} u gornjem lijevom stupcu.

3. Zatim kliknite na Promijeni postavke koje trenutno nisu dostupne.^{( Change settings that are currently unavailable.)}

4. Poništite opciju Uključi brzo pokretanje^{(Uncheck Turn on Fast startup)} u odjeljku Postavke isključivanja.

5. Sada kliknite Spremi promjene^{(Save Changes)} i ponovno pokrenite računalo.

Ako gore navedeno ne uspije onemogućiti brzo pokretanje, pokušajte ovo:

1. Pritisnite tipku Windows Key + X , a zatim kliknite naredbeni redak (administrator).^{(Command Prompt (Admin).)}

2. Upišite sljedeću naredbu u cmd i pritisnite Enter :

powercfg -h isključen^{(powercfg -h off)}

3. Ponovno pokrenite da biste spremili promjene.

Metoda 6: Pokrenite provjeru sistemskih datoteka (SFC) i provjerite disk (CHKDSK)^{(Method 6: Run System File Checker (SFC) and Check Disk (CHKDSK))}

Naredba  sfc /scannow ( System File Checker ) skenira integritet svih zaštićenih datoteka sustava Windows i zamjenjuje neispravno oštećene, promijenjene/modificirane ili oštećene verzije ispravnim verzijama ako je moguće.

1.  Otvorite naredbeni redak s administrativnim pravima^{(Open Command Prompt with Administrative rights)} .

2. Sada u cmd prozoru upišite sljedeću naredbu i pritisnite Enter :

sfc /scannow

3. Pričekajte^(Wait) da se završi provjera sistemskih datoteka.

Ponovno pokušajte s aplikacijom koja je davala  pogrešku^(error) i ako još uvijek nije popravljena, nastavite na sljedeću metodu.

4. Sljedeće pokrenite CHKDSK odavde  Popravi pogreške datotečnog sustava pomoću uslužnog programa za provjeru diska (CHKDSK)^{(Fix File System Errors with Check Disk Utility(CHKDSK))} .^{(Fix File System Errors with Check Disk Utility(CHKDSK).)}

5. Pustite da se gornji proces dovrši i ponovno pokrenite računalo da biste spremili promjene.

Preporučeno:^{(Recommended:)}

• Popravite pogrešku 0x8007025d dok pokušavate vratiti^{(Fix Error 0x8007025d while trying to restore)}
• Popravak vraćanja sustava nije uspješno dovršen^{(Fix System Restore did not complete successfully)}
• Onemogućite Snap Pop-up dok se pomiču Windows^{(Disable Snap Pop-Up While Moving Windows)}
• Popravite pogrešku vraćanja sustava 0x80070091^{(Fix System Restore Error 0x80070091)}

To je to što ste uspješno popravili File Explorer ne ističe odabrane datoteke ili mape^{(Fix File Explorer does not highlight selected files or folders)} ako još uvijek imate pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Fix File Explorer does not highlight selected files or folders

Windows 10 usеrs havе reported a new prоblem in which when you seleсt files or folders in File Explorer, thesе files & folderѕ won’t be highlighted even thoυgh these files & folders are selected but are not highlighted therefore making it impossiblе to tell which one is selected or which are nоt.

It is a very frustrating issue because this makes it impossible to work with files & folders in Windows 10. Anyway, a troubleshooter is here to fix this issue so without wasting any time let’s see how to actually fix this problem in Windows 10 with the below-listed troubleshooting steps.

Fix File Explorer does not highlight selected files or folders

Make sure to create a restore point just in case something goes wrong.

Method 1: Restart Windows File Explorer from the Task Manager

1. Press Ctrl + Shift + Esc to open Task Manager.

2. Now find Windows Explorer in the processes list.

3. Right-click on Windows Explorer and select End Task.

4. This will close File Explorer and in order to restart it, click File > Run new task.

5. Type Explorer.exe in the dialog box and hit OK.

This will restart Windows Explorer, but this step only temporarily fixes the problem.

Method 2: Perform a Full Shutdown

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following command in cmd and hit Enter:

shutdown /s /f /t 0

3. Wait for a few minutes as the complete shutdown takes more time than the normal shutdown.

4. Once the computer shut down completely, restart it. 

This should Fix File Explorer does not highlight selected files or folders but if you’re still stuck at this problem then follow the continue to the next method.

Method 3: Toggle High Contrast mode on and off

A simple fix for File Explorer does not highlight selected files or folders problem would be toggling High Contrast mode on and off. In order to do so, press left Alt + left Shift + Print Screen; a pop-up will ask “Do you want to turn on high contrast mode?” select Yes. Once high contrast mode is enabled again try to select file & folders and see if you’re able to highlight them. Again disable High contrast mode by pressing left Alt + left Shift + Print Screen.

Method 4: Change Background Drop

1. Right-click on Desktop and select Personalize.

2. Under Background selects Solid Color.

3. If you already have a solid colour under background then choose any different colour.

4.Reboot your PC to save changes and this should able to Fix File Explorer does not highlight selected files or folders.

Method 5: Disable Fast Startup

1. Press Windows Key + R then type powercfg.cpl and hit enter to open Power Options.

2. Click on Choose what the power buttons do in the top-left column.

3. Next, click on Change settings that are currently unavailable.

4. Uncheck Turn on Fast startup under Shutdown settings.

5. Now click Save Changes and Restart your PC.

If the above fails to disable fast startup, then try this:

1. Press Windows Key + X then click Command Prompt (Admin).

2. Type the following command in cmd and hit Enter:

powercfg -h off

3. Reboot to save changes.

Method 6: Run System File Checker (SFC) and Check Disk (CHKDSK)

The sfc /scannow command (System File Checker) scans the integrity of all protected Windows system files and replaces incorrectly corrupted, changed/modified, or damaged versions with the correct versions if possible.

1. Open Command Prompt with Administrative rights.

2. Now in the cmd window type the following command and hit Enter:

sfc /scannow

3. Wait for the system file checker to finish.

Again try the application which was giving error and if it’s still not fixed, then continue to the next method.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5. Let the above process complete and again reboot your PC to save changes.

Recommended:

• Fix Error 0x8007025d while trying to restore
• Fix System Restore did not complete successfully
• Disable Snap Pop-Up While Moving Windows
• Fix System Restore Error 0x80070091

That’s it you have successfully Fix File Explorer does not highlight selected files or folders if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Fix File Explorer se ne otvara u sustavu Windows 10

• Popravite da File Explorer ne reagira u sustavu Windows 10

• Popravite da File Explorer ne reagira u sustavu Windows 10

• Popravite problem s rušenjem File Explorera u sustavu Windows 10

• Popravi Windows File Explorer stalno se osvježava

• Rješavanje problema Windows ne može komunicirati s uređajem ili resursom

• Popravite traku zadataka Windows 10 koja se ne skriva

• Popravi visoku upotrebu CPU-a od strane hosta usluge: lokalni sustav

• Kako popraviti pogreške datotečnog sustava u sustavu Windows 10

• Kako popraviti Windows 11 File Explorer spor ili ne reagira

• Kako popraviti Windows 10 File Explorer ne reagira

• Kako ukloniti OneDrive iz Windows 10 File Explorer

• Popravite pogrešku sustava datoteka Windows 10 2147219196

• Popravi fatalnu grešku Nije pronađena jezična datoteka

• Popravak Nije moguće otvoriti PDF datoteke u Internet Exploreru

• Popravite datoteci s podacima o konfiguraciji pokretanja nedostaju neke potrebne informacije

• [RJEŠENO] Windows 10 File Explorer se ruši

• Popravite da Search Explorer ne radi u sustavu Windows 10

• Omogućite ili onemogućite numeričko razvrstavanje u File Exploreru u sustavu Windows 10

• Popravite Internet Explorer je prestao raditi