Popravite Došlo je do problema pri slanju naredbe programu: ^{(Fix There was a Problem Sending the Command to the Program: )} Ako se susrećete s problemima dok pokušavate otvoriti Microsoft Excel datoteku i primite poruku o pogrešci " Došlo je do problema pri slanju naredbe programu^{(There was a problem sending the command to the program)} ", to znači da se Windows ne može povezati s Microsoft Office aplikacijama^{(Microsoft Office Applications)} . Sada ako kliknete U redu na poruci o pogrešci i ponovno pokušate otvoriti datoteku, otvorit će se bez ikakvih problema. Poruka o pogrešci ponovno će se pojaviti nakon što ponovno pokrenete računalo.

Kada pokušate otvoriti datoteku Microsoft Officea^{(Microsoft Office)} kao što je Word dokument, Excel proračunska tablica itd., dobivate sljedeće poruke o pogrešci:

• Došlo je do problema pri slanju naredbe programu.^{(There was a problem sending the command to the program.)}
• Došlo je do pogreške prilikom slanja naredbi programu^{(An error occurred when sending commands to the program)}
• Windows ne može pronaći datoteku, provjerite jeste li ispravno upisali naziv, a zatim pokušajte ponovno.^{(Windows cannot find the file, Make sure you typed the name correctly, and then try again.)}
• Ne mogu pronaći datoteku (ili jednu od njezinih komponenti). Provjerite jesu li put i naziv datoteke ispravni i jesu li dostupne sve potrebne biblioteke.^{(Cannot find the file (or one of its components). Make sure the path and filename are correct and that all required libraries are available.)}

Sada se možete suočiti s bilo kojom od gore navedenih poruka o pogrešci, a u nekim slučajevima čak vam neće dopustiti da otvorite željenu datoteku. Dakle, stvarno ovisi o konfiguraciji korisničkog sustava mogu li vidjeti datoteku ili ne nakon što kliknu U redu na poruci o pogrešci. Dakle, bez gubljenja vremena, pogledajmo kako zapravo riješiti^(Fix) problem slanja naredbe^(Command) programu uz pomoć dolje navedenog vodiča za rješavanje problema ^(Program).^(Problem)

Došlo je do problema^(Problem) pri slanju naredbe^(Command) programu [POPRAVLJENO]

Obavezno  stvorite točku vraćanja^{(create a restore point)}  u slučaju da nešto pođe po zlu.

Metoda 1: Onemogućite dinamičku razmjenu podataka (DDE)^{(Method 1: Disable Dynamic Data Exchange (DDE))}

1.Otvorite program Microsoft Excel i zatim kliknite^(Click) na Office ORB (ili izbornik DATOTEKA), a zatim kliknite na Opcije programa Excel.^{(Excel Options.)}

2. Sada u Excel Opciji odaberite Napredno^(Advanced) s lijevog izbornika.

3. Pomaknite se prema dolje do odjeljka Općenito^(General) na dnu i svakako poništite^(uncheck) opciju " Zanemari druge aplikacije koje koriste dinamičku razmjenu podataka (DDE). ^{(Ignore other applications that use Dynamic Data Exchange (DDE).)}“

4. Kliknite U redu za spremanje promjena i ponovno pokretanje računala.

Metoda 2: Onemogućite opciju "Pokreni kao administrator".^{(Method 2: Disable the “Run as administrator” option)}

1. Idite na izbornik Start i upišite naziv programa koji uzrokuje problem.

2. Desnom tipkom miša kliknite program i odaberite Otvori mjesto datoteke.^{( Open file location.)}

3. Sada ponovno desnom tipkom miša kliknite na program i odaberite Svojstva.^{(Properties.)}

4. Prebacite se na karticu^{(Compatability tab)} Kompatibilnost i poništite opciju " Pokreni ovaj program kao administrator. ^{(Run this program as an administrator.)}“

5. Kliknite Primijeni^(Apply) , a zatim OK za spremanje promjena.

6. Ponovo pokrenite računalo i ponovno pokušajte pokrenuti program i provjerite možete li  popraviti Došlo je do problema prilikom slanja naredbe u program.^{(Fix There was a Problem Sending the Command to the Program error.)}

Metoda 3: Resetirajte asocijacije datoteka^{(Method 3: Reset file associations)}

1. Desnom tipkom miša kliknite datoteku sustava Office i odaberite opciju " Otvori s...^{(Open with…)} ".

2. Na sljedećem zaslonu kliknite Više aplikacija, a zatim se pomaknite prema dolje i kliknite na " Potraži drugu aplikaciju na ovom računalu^{(Look for another app on this PC)} ".

Napomena: Provjerite je li označena opcija " Uvijek koristi ovu aplikaciju za ovu vrstu datoteke^{(Always use this application for this file type)} ".

3. Sada potražite C:\Program Files (x86)\Microsoft Office (za 64-bitne) i C:Program Files\Microsoft Office\ (za 32-bit) i odaberite ispravnu EXE datoteku.^{(EXE file.)}

Na primjer:^{(For example:)} ako se susrećete s gornjom pogreškom s Excel datotekom, pregledajte iznad lokacije, a zatim kliknite na OfficeXX (gdje će XX biti verzija sustava Office ), a zatim odaberite datoteku EXCEL.EXE .

4.Nakon odabira datoteke obavezno kliknite na Otvori^(Open) .

5. Ovo bi automatski resetiralo zadanu asocijaciju datoteka za određenu datoteku.

Metoda 4: Popravite Microsoft Office^{(Method 4: Repair Microsoft Office)}

1. Pritisnite tipku Windows + R zatim upišite appwiz.cpl i pritisnite Enter kako biste otvorili Programe i značajke.^{(Programs and Features.)}

2. Sada na popisu pronađite Microsoft Office , a zatim desnom tipkom miša kliknite na njega i odaberite Promijeni.^{( Change.)}

3.Kliknite opciju Popravak^(Repair) , a zatim kliknite Nastavi.

4. Nakon što je popravak dovršen, ponovno pokrenite računalo da biste spremili promjene. Ovo bi trebalo popraviti. Došlo je do problema pri slanju naredbe u programsku pogrešku, ^{(Fix There was a Problem Sending the Command to the Program error, )} ako nije, nastavite sa sljedećom metodom.

Metoda 5: Isključite dodatke^{(Method 5: Turn off add-ins)}

1.Otvorite Office program koji prikazuje gornju pogrešku, zatim kliknite na Office ORB i zatim kliknite na Opcije.^(Options.)

2.Sada s lijevog izbornika odaberite Add-Ins i na dnu, iz padajućeg izbornika Manage^{(Manage dropdown)} odaberite COM Add-ins i kliknite Go.

3.Obrišite jedan od dodataka s popisa, a zatim odaberite U redu.

4. Ponovno pokrenite Excel ili bilo koji drugi Office program koji prikazuje gornju pogrešku i provjerite možete li riješiti problem.

5. Ako problem i dalje postoji, ponovite korake 1-3 za različite dodatke na popisu.

6. Također, nakon što izbrišete sve COM dodatke^{(COM Add-ins)} i još uvijek se suočavate s pogreškom, odaberite Excel dodatke^{(Excel Add-ins)} s padajućeg izbornika Upravljanje i kliknite Idi.

7. Poništite ili izbrišite sve dodatke na popisu, a zatim odaberite U redu.

8.Ponovo pokrenite Excel i to bi trebalo  popraviti. Došlo je do problema pri slanju naredbe programu.^{(Fix There was a Problem Sending the Command to the Program.)}

Metoda 6: Onemogućite hardversko ubrzanje^{(Method 6: Disable hardware acceleration)}

1. Pokrenite bilo koji Office program, a zatim kliknite na Office ORB ili karticu Datoteka odaberite ^(File)Opcije.^(Options.)

2. Na lijevom izborniku odaberite Napredno^(Advanced) i pomaknite se prema dolje do odjeljka Zaslon.^{(Display section.)}

3. Ispod Zaslon svakako poništite opciju^(uncheck) “ Onemogući hardversko grafičko ubrzanje. ^{(Disable hardware graphics acceleration.)}“

4. Odaberite OK i ponovno pokrenite računalo da biste spremili promjene.

Metoda 7: popravak registra^{(Method 7: Registry Fix)}

1. Pritisnite tipku Windows + R zatim upišite regedit i pritisnite Enter da otvorite uređivač registra^{(Registry Editor)} .

2. Idite do sljedećeg ključa registra:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office

3. Pod ključem Office pronaći ćete potključ s nazivom 10.0, 11.0, 12.0 , itd. ovisno o verziji Microsoft Officea^{(Microsoft Office)} instaliranoj na vašem računalu.

4.Proširite gornju tipku i vidjet ćete Access, Excel, Groover, Outlook itd.

5. Sada proširite ključ povezan s gornjim programom koji ima problema i pronaći ćete podatkovni ključ^{(Data key)} . Na primjer: Ako Microsoft Word uzrokuje probleme, proširite Word i vidjet ćete podatkovni^(Data) ključ naveden ispod njega.

6. Desnom tipkom miša kliknite Data key i odaberite Delete.

Provjerite možete li  popraviti Došlo je do problema pri slanju naredbe programu.^{(Fix There was a Problem Sending the Command to the Program.)}

Metoda 8: Privremeno onemogućite antivirusni softver^{(Method 8: Temporarily Disable Antivirus Software)}

1. Desnom tipkom miša kliknite ikonu Antivirusni program^{( Antivirus Program icon)} na traci sustava i odaberite Onemogući.^(Disable.)

2. Zatim odaberite vremenski okvir za koji će Antivirusni program ostati onemogućen.^{( Antivirus will remain disabled.)}

Napomena: Odaberite najmanju moguću količinu vremena, na primjer 15 minuta ili 30 minuta.

3. Kada završite, ponovno pokušajte otvoriti Microsoft Excel i provjerite je li pogreška riješena ili ne.

Preporučeno za tebe:^{(Recommended for you:)}

• Popravak Ne mogu uključiti Windows Firewall Kôd pogreške 0x80070422^{(Fix Can’t turn on Windows Firewall Error code 0x80070422)}
• Nije moguće otvoriti PDF datoteke u Internet Exploreru^{(Unable to open PDF files in Internet Explorer)}
• Popravite nešto što je pošlo krivo tijekom sinkronizacije aplikacije Mail u sustavu Windows 10^{(Fix Something Went Wrong While Syncing Mail App In Windows 10)}
• Popravak Ne mogu otvoriti vaše zadane mape e-pošte. Skladište s informacijama nije se moglo otvoriti^{(Fix Cannot Open Your Default Email Folders. The Information Store Could Not Be Opened)}

To je to što ste uspješno popravili. Došlo je do problema sa slanjem naredbe u program,^{(Fix There was a Problem Sending the Command to the Program error)} ali ako i dalje imate bilo kakvih pitanja u vezi s ovom objavom, slobodno ih postavite u odjeljku za komentare.

There was a Problem Sending the Command to the Program [FIXED]

Fix There was a Problem Sending the Command to the Program: If you are facing issues while trying to open Microsoft Excel file and receive the error message “There was a problem sending the command to the program” then it means that Windows is unable to connect with Microsoft Office Applications. Now if you click OK on the error message and again try to open the file, it will open without any issues. The error message will again pop up once you reboot your PC.

When you try to open a Microsoft Office file such as a Word document, Excel spreadsheet, etc, you receive following error messages:

• There was a problem sending the command to the program.
• An error occurred when sending commands to the program
• Windows cannot find the file, Make sure you typed the name correctly, and then try again.
• Cannot find the file (or one of its components). Make sure the path and filename are correct and that all required libraries are available.

Now you can face any one of the above error messages and in some cases, it won’t even let you open the desired file. So it really depends on user system configuration if they are able to view the file or not after clicking OK on the error message. So without wasting any time let’s see how to actually Fix There was a Problem Sending the Command to the Program with the help of below-listed troubleshooting guide.

There was a Problem Sending the Command to the Program [FIXED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Disable Dynamic Data Exchange (DDE)

1.Open Microsoft Excel program and then Click on Office ORB (or FILE menu) and then click on Excel Options.

2.Now in Excel Option select Advanced from the left-hand menu.

3.Scroll down to the General section in the bottom and make sure to uncheck the option “Ignore other applications that use Dynamic Data Exchange (DDE).“

4.Click Ok to save changes and reboot your PC.

Method 2: Disable the “Run as administrator” option

1.Go to Start menu and type the name of the program causing the issue.

2.Right-click on the program and select Open file location.

3.Now again right-click on the program and select Properties.

4.Switch to the Compatability tab and uncheck “Run this program as an administrator.“

5.Click Apply followed by OK to save changes.

6.Reboot your PC and again try to run the program and see if you’re able to Fix There was a Problem Sending the Command to the Program error.

Method 3: Reset file associations

1.Right-click on the Office file and select “Open with…” option.

2.On the next screen click on More apps and then scroll down and click on “Look for another app on this PC“.

Note: Make sure “Always use this application for this file type” is checked.

3.Now browse to C:\Program Files (x86)\Microsoft Office\ (For 64-bit) and C:\Program Files\Microsoft Office\ (For 32-bit) and select the correct EXE file.

For example: if you are facing the above error with an excel file then browse above location then click on OfficeXX (where XX will be the Office version) and then select the EXCEL.EXE file.

4.After selecting the file make sure to click on Open.

5.This would automatically reset default file association for the particular file.

Method 4: Repair Microsoft Office

1.Press Windows Key + R then type appwiz.cpl and hit Enter in order to open Programs and Features.

2.Now from the list find Microsoft Office then right-click on it and select Change.

3.Click the option Repair, and then click Continue.

4.Once the repair is complete reboot your PC to save changes. This should Fix There was a Problem Sending the Command to the Program error, if not then continue with the next method.

Method 5: Turn off add-ins

1.Open the Office program showing the above error then click on Office ORB and then click on Options.

2.Now from the left-hand menu select Add-Ins and at the bottom, from Manage dropdown select COM Add-ins and click Go.

3.Clear one of the add-ins in the list, and then select OK.

4.Restart Excel or any other Office program showing the above error and see if you are able to resolve the issue.

5.If the issue still persists repeat step 1-3 for different add-ins in the list.

6.Also, once you have cleared all the COM Add-ins and still facing the error, then select Excel Add-ins from Manage dropdown and click Go.

7.Uncheck or clear all the add-in in the list and then select OK.

8.Restart Excel and this should Fix There was a Problem Sending the Command to the Program.

Method 6: Disable hardware acceleration

1.Start any Office program and then click on Office ORB or File tab select Options.

2.From the left-hand menu select Advanced and scroll down to the Display section.

3.Under Display make sure to uncheck “Disable hardware graphics acceleration.“

4.Select OK and reboot your PC to save changes.

Method 7: Registry Fix

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office

3.Under Office key you will find a subkey with a name 10.0, 11.0, 12.0, etc depending upon the Microsoft Office version installed on your PC.

4.Expand the above key and you will see Access, Excel, Groover, Outlook etc.

5.Now expand the key associated with above program which is having issues and you will find a Data key. For example: If Microsoft Word is causing the trouble then expand Word and you will see a Data key listed under it.

6.Right-click on Data key and select Delete.

See if you’re able to Fix There was a Problem Sending the Command to the Program.

Method 8: Temporarily Disable Antivirus Software

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to open Microsoft Excel and check if the error resolves or not.

Recommended for you:

• Fix Can’t turn on Windows Firewall Error code 0x80070422
• Unable to open PDF files in Internet Explorer
• Fix Something Went Wrong While Syncing Mail App In Windows 10
• Fix Cannot Open Your Default Email Folders. The Information Store Could Not Be Opened

That’s it you have successfully Fix There was a Problem Sending the Command to the Program error but if you still have any questions regarding this post feel free to ask them in the comment’s section.

Related posts

• Verzija operativnog sustava nije kompatibilna s popravkom pri pokretanju [POPRAVLJENO]

• Kartica za dijeljenje nedostaje u svojstvima mape [POPRAVLJENO]

• Pogreška upravitelja vjerodajnica 0x80070057 Parametar je netočan [POPRAVLJENO]

• Problem s ograničenim WiFi povezivanjem [RJEŠENO]

• Ovaj program je blokiran grupnim pravilima [RJEŠENO]

• Windows se ne može povezati s pisačem [RIJEŠENO]

• Popravak Windowsa nije mogao dovršiti instalaciju [RJEŠENO]

• Windows 10 neće pamtiti spremljenu WiFi lozinku [RIJEŠENO]

• Kako ući u BIOS na Windows 10 [VODIČ]

• Omogućite ili onemogućite naslijeđenu konzolu za naredbeni redak i PowerShell u sustavu Windows 10

• Očistite disk pomoću naredbe Diskpart Clean u sustavu Windows 10

• Kod pogreške u trgovini Windows 0x8000ffff [RJEŠENO]

• Brisanje mape ili datoteke pomoću naredbenog retka (CMD)

• Računalo se nasumično ponovno pokreće na Windows 10 [RJEŠENO]

• 4 načina da popravite nestanak pokazivača miša [VODIČ]

• [POPRAVLJENO] Pogreška Windows Update 0x80010108

• Potpuno zaustavite ažuriranje sustava Windows 10 [VODIČ]

• Upravljački program zaslona prestao je reagirati i oporavio je pogrešku [RJEŠENO]

• Zamijenite PowerShell naredbenim redkom u kontekstualnom izborniku u sustavu Windows 10

• Pomozite! Problem s naopakim ili bočnim zaslonom [RIJEŠENO]