Brisanje mape ili datoteke pomoću naredbenog retka:^{(Delete a Folder or File using Command Prompt: )} Da biste stvorili ili izbrisali mapu na svom uređaju, jednostavno kliknite desnom tipkom miša^{(right-click)} na radnu površinu i odaberite željene opcije. Nije li lako? Da, to je vrlo jednostavan proces, ali ponekad ova metoda ne radi ili se možete suočiti s nekim problemima. Zato se ne morate oslanjati samo na jednu metodu. Uvijek možete koristiti naredbeni redak^{(Command Prompt)} ( CMD ) za stvaranje nove mape ili datoteke i brisanje mapa ili datoteka. U ovom vodiču raspravljat ćemo o svim mogućim metodama za stvaranje ili brisanje datoteka i mapa. 

Ako ne možete izbrisati neke datoteke ili mape i vidite poruku upozorenja u sustavu Windows^(Windows) , ne brinite, možete jednostavno izbrisati takve mape ili datoteke pomoću naredbenog retka^{(Command Prompt)} . Stoga^(Therefore) je učenje korištenja naredbenog retka^{(Command Prompt)} za obavljanje određenih zadataka uvijek od pomoći. Raspravit ćemo o svim načinima na koje korisnici Microsofta^(Microsoft) mogu stvarati i brisati datoteke ili mape.

Napomena:^{(Note: )} Ako izbrišete mapu, ona će također izbrisati sav njezin sadržaj i datoteke. Stoga, morate to imati na umu da ćete, nakon što izbrišete mapu pomoću naredbenog retka^{(Command Prompt)} , izbrisati sve datoteke prisutne unutar odabrane mape.

Izbriši ključ^{(Delete Key)}

Jedan od najjednostavnijih načina za brisanje mape ili datoteke je odabir određene mape ili datoteke, a zatim pritisnite gumb Izbriši^(Delete) na tipkovnici. Vi samo trebate locirati određenu datoteku ili mapu na svom uređaju. Ako želite izbrisati više datoteka i mapa, trebate pritisnuti i držati tipku Ctrl i odabrati sve datoteke ili mape koje trebate izbrisati. Kada završite, ponovno pritisnite gumb Izbriši^(Delete) na tipkovnici.

Izbrišite mape ili datoteke pomoću opcije desnog klika ^{(Delete folders or files with right-click option )}

Možete odabrati datoteku ili mapu koju želite izbrisati i desnom tipkom miša kliknite tu datoteku ili mapu i odaberite opciju brisanja iz kontekstnog izbornika desnim klikom.

Kako izbrisati mapu^(Folder) ili datoteku^(File) pomoću naredbenog retka^{(Command Prompt)}

Obavezno  stvorite točku vraćanja^{(create a restore point)} u slučaju da nešto pođe po zlu.

Dok brišete, stvarate ili otvarate bilo koju datoteku ili mapu pomoću naredbenog retka^{(Command Prompt)} , morate biti sigurni da koristite ispravnu naredbu da biste obavili svoj zadatak. Nadamo^(Hopefully) se da će vam sve dolje navedene metode biti od pomoći.

Metoda 1: Kako izbrisati datoteke ili mape u MS-DOS naredbenom retku^{(Method 1: How to delete files or folders in MS-DOS Command Prompt)}

Napomena:^(Note:) trebate otvoriti naredbeni^(Command) redak ili Windows PowerShell s administratorskim pristupom na svom uređaju. 

1.Otvorite povišeni naredbeni redak^{(Command Prompt)} koristeći bilo koju od ovdje spomenutih metoda^{(methods mentioned here)} .

2. Sada upišite sljedeću naredbu u naredbeni redak^{(Command Prompt)} i pritisnite Enter :

Del example.txt

3. Da biste izbrisali tu datoteku, morate unijeti punu stazu^{( enter the full path)} (lokaciju) datoteke i naziv datoteke s njenom ekstenzijom .^{(file name with its extension)}

Na primjer, izbrisao sam datoteku sample.docx sa svog uređaja. Za brisanje unio sam " del sample.docx " bez navodnika. Ali prvo, moram se navigirati do navedene lokacije datoteke pomoću naredbe cd.

Kako izbrisati mapu ili direktorij pomoću naredbenog retka^{(How to delete a folder or directory using the Command Prompt)}

1. Opet otvorite povišeni naredbeni redak^{(Elevated Command Prompt)} koristeći bilo koju od ovdje spomenutih metoda^{(methods mentioned here)} .

2. Sada morate unijeti dolje spomenutu naredbu u cmd i pritisnuti Enter : 

rmdir /s <complete path of folder>

3. Ako put do mape ima razmake, tada morate koristiti navodnike za put. 

rmdir /s “C:\Users\suraj\Desktop\test folder”

4. Uzmimo primjer u svrhu ilustracije: Stvorio sam testnu mapu na svom D pogonu. Za brisanje te mape moram unijeti donju naredbu:

rmdir /s d: \testfolder\

Morate upisati naziv pogona na kojem je spremljena vaša mapa, a zatim upišite naziv navedene mape. Nakon što upišete gornju naredbu i pritisnete Enter , vaša mapa i sav njezin sadržaj bit će trajno izbrisani s vašeg računala bez ostavljanja traga na vašem uređaju.

Sada kada ste naučili kako izbrisati mapu ili datoteku pomoću naredbenog retka^{(Command Prompt)} ( CMD ), želite li nastaviti učiti više o tome što možete učiniti pomoću naredbenog retka^{(Command Prompt)} ?  Pa^(Well) , ako ste zainteresirani, onda ćemo u sljedećem dijelu govoriti o tome kako stvoriti mapu, otvoriti bilo koju mapu i datoteku koristeći Command Prompt . 

Metoda 2: Kako stvoriti mapu pomoću naredbenog retka^{(Method 2: How to create a Folder using the Command Prompt)}

1.Otvorite povišeni naredbeni redak^{(Command Prompt)} koristeći bilo koju od ovdje spomenutih metoda^{(methods mentioned here)} .

2. Sada upišite sljedeću naredbu u naredbeni redak^{(Command Prompt)} i pritisnite Enter :

MD drive_letter\folder name\

Napomena:^(Note:) Ovdje trebate zamijeniti drive_letter sa stvarnim slovom pogona gdje želite stvoriti spomenutu mapu. Također, trebate zamijeniti naziv mape stvarnim nazivom mape koju želite koristiti.

3. U gornjem primjeru, napravio sam test mapu u D: pogonu^{(testfolder in the D: drive)} svog računala i za to sam upotrijebio naredbu:

MD D: \testfolder\

Ovdje možete promijeniti naziv pogona i mape prema preferencijama pogona i nazivu mape. Sada možete provjeriti je li naredba uspješno izvršena ili ne tako što ćete otići na pogon na kojem ste kreirali mapu. Kao iu mom slučaju, napravio sam mapu na D: pogonu. Slika ispod pokazuje da je mapa stvorena pod D: pogonom na mom sustavu.

Ako želite otvoriti određenu mapu na svom uređaju, to možete učiniti i pomoću naredbenog retka^{(Command Prompt)} .

1.Otvorite naredbeni redak^{(Command Prompt)} i upišite naredbu b elow^(elow-given) u cmd:

start drive_name: \folder name

Napomena:^(Note:) Ovdje trebate zamijeniti drive_letter sa stvarnim slovom pogona u kojem se nalazi vaša mapa koju želite otvoriti. Također, trebate zamijeniti naziv mape stvarnim nazivom mape koju želite koristiti.

2. U gornjem primjeru otvorio sam istu mapu (testfolder) koju sam kreirao u gornjem koraku i za to sam upotrijebio naredbu:

start D: \testfolder\

Nakon što pritisnete gumb za unos, mapa će se odmah otvoriti na vašem zaslonu bez odlaganja. Ura!

Izbrišite mapu pomoću naredbenog retka^{(Delete a folder with the Command Prompt)}

Iako smo već raspravljali o tome kako izbrisati mapu pomoću naredbenog retka^{(Command Prompt)} , ali u ovoj metodi koristit ćemo drugu naredbu. Ova je naredba također korisna za brisanje mape na vašem uređaju.

1.Otvorite povišeni naredbeni redak^{(Command Prompt)} koristeći bilo koju od ovdje spomenutih metoda^{(methods mentioned here)} .

2. Sada upišite sljedeću naredbu u naredbeni redak^{(Command Prompt)} i pritisnite Enter :

Rd drive_name: \folder name\

3. Na primjer, izbrisao sam istu mapu koju smo stvorili iznad, testfolder . Za to koristim sljedeću naredbu:

Rd D: \testfolder\

Nakon što pritisnete Enter, gornja mapa (test mapa) će se odmah izbrisati iz vašeg sustava. Ova mapa će biti trajno izbrisana s vašeg sustava i ne može se vratiti. Nakon brisanja, nećete ga pronaći u košu za smeće^(Recycle) za vraćanje. Stoga morate biti sigurni dok brišete sve datoteke ili mape pomoću naredbenog retka^{(Command Prompt)} jer nećete moći oporaviti podatke nakon brisanja.

Preporučeno:^{(Recommended:)}

• Where is NOTEPAD in Windows 10? 6 Ways to open it!
• Popravi bežični usmjerivač se stalno prekida ili ispada^{(Fix Wireless Router Keeps Disconnecting Or Dropping)}
• Popravak Nemogućnost aktiviranja vatrozida Windows Defendera^{(Fix Unable to Activate Windows Defender Firewall)}
• Uklonite Android viruse bez vraćanja na tvorničke postavke^{(Remove Android Viruses Without a Factory Reset)}

Nadam se da je ovaj članak bio od pomoći i sada možete jednostavno izbrisati mapu ili datoteku pomoću naredbenog retka (CMD)^{( Delete a Folder or File using Command Prompt (CMD))} , ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

Delete a Folder or File using Command Prompt (CMD)

Delete a Folder or File using Command Prompt: To create or delete a folder on your device you can simply right-click on the desktop and choose the desired options. Isn’t it easy? Yes, it is a very easy process but sometimes this method doesn’t work, or you can face some problems. So that’s why you don’t need to rely on one single method. You can always use the Command Prompt (CMD) to create a new folder or file and delete folders or files. In this guide, we will discuss all the possible methods to create or delete files & folders. 

If you are not able to delete some files or folders and you see a Windows warning message then don’t worry, you can easily delete such folders or files using the Command Prompt. Therefore, learning to use Command Prompt to perform certain tasks is always helpful. We will discuss all the ways via which Microsoft users can create & delete files or folders.

Note: If you delete a folder, then it will also delete all its contents & files. Therefore, you need to keep this in mind that once you delete a folder using Command Prompt, you will delete all the files present within the selected folder.

Delete Key

One of the easiest ways to delete a folder or file is to select the particular folder or file and then press the Delete button your keypad. You just need to locate the particular file or folder on your device. If you want to delete multiple files & folders then you need to press & hold the Ctrl key and select all the files or folders which you need to delete. Once done, then again press the Delete button on your keyboard.

Delete folders or files with right-click option 

You can select the file or folder that you want to delete and right-click on that file or folder and choose the delete option from the right-click context menu.

How to Delete a Folder or File using Command Prompt

Make sure to create a restore point just in case something goes wrong.

While deleting, creating, or opening any file or folder using the Command Prompt, you need to make sure that you use the right command to get your task done. Hopefully, you will find all the below-mentioned methods helpful.

Method 1: How to delete files or folders in MS-DOS Command Prompt

Note: You need to open a Command prompt or Windows PowerShell with admin access on your device. 

1.Open Elevated Command Prompt using any one of the methods mentioned here.

2.Now type the following command into the Command Prompt and hit Enter:

Del example.txt

3.You need to enter the full path (location) of the file and file name with its extension to delete that file.

For example, I deleted sample.docx file from my device. To delete I entered “del sample.docx” without quotation marks.  But first, I need to navigate to the said file location using the cd command.

How to delete a folder or directory using the Command Prompt

1.Again open Elevated Command Prompt using any one of the methods mentioned here.

2.Now you need to enter the below-mentioned command into cmd and hit Enter: 

rmdir /s <complete path of folder>

3.If your folder path has spaces, then you need to use quotation marks for the path. 

rmdir /s “C:\Users\suraj\Desktop\test folder”

4.Let’s take an example for illustration purpose: I have created a test folder in my D drive. To delete that folder I need to enter the below command:

rmdir /s d: \testfolder\

You need to type the drive name where your folder is saved and then type the name of the said folder. Once you type the above command and hit Enter, your folder and all of its content will be deleted permanently from your PC without leaving any trace on your device.

Now that you have learned how to delete a folder or file using Command Prompt (CMD), do you wish to continue to learn more thing that you can do with the Command Prompt?  Well, if you are interested then in the next part we will talk about how to create a folder, open any folder and file using the Command Prompt. 

Method 2: How to create a Folder using the Command Prompt

1.Open Elevated Command Prompt using any one of the methods mentioned here.

2.Now type the following command into the Command Prompt and hit Enter:

MD drive_letter\folder name\

Note: Here you need to replace drive_letter with the actual drive letter where you want to create the said folder. And also, you need to replace the folder name with the actual name of the folder which you wish to use.

3.In the above example, I have created a testfolder in the D: drive of my PC and for that, I have used the command:

MD D: \testfolder\

Here you can change the drive and folder name according to your drive preferences and folder name. Now you can check whether the command successfully executed or not by going to the drive where you have created the folder. As in my case, I have created the folder in the D: drive. Below image shows that the folder is created under D: drive on my system.

If you want to open a particular folder on your device, you can do it using the Command Prompt as well.

1.Open the Command Prompt and type the below-given command in the cmd:

start drive_name: \folder name

Note: Here you need to replace drive_letter with the actual drive letter where your folder which you wish to open reside. And also, you need to replace the folder name with the actual name of the folder which you wish to use.

2.In the above example, I have opened the same folder (testfolder) that I created in the above step and for that, I have used the command:

start D: \testfolder\

Once you will hit the enter button, the folder will immediately open on your screen without a delay. Hurray!

Delete a folder with the Command Prompt

Although we have already discussed how to delete a folder with Command Prompt but in this method, we will use another command. This command is also equally useful to delete a folder on your device.

1.Open Elevated Command Prompt using any one of the methods mentioned here.

2.Now type the following command into the Command Prompt and hit Enter:

Rd drive_name: \folder name\

3.For example, I deleted the same folder which we created above, testfolder. For that, I use the following command:

Rd D: \testfolder\

Once you hit Enter, the above folder (testfolder) will be deleted immediately from your system. This folder will be permanently deleted from your system and cannot be recovered. Once deleted, you will not find it in the Recycle bin to restore. Therefore, you need to be sure while deleting any files or folders with Command Prompt as you won’t be able to recover the data once deleted.

Recommended:

• Where is NOTEPAD in Windows 10? 6 Ways to open it!
• Fix Wireless Router Keeps Disconnecting Or Dropping
• Fix Unable to Activate Windows Defender Firewall
• Remove Android Viruses Without a Factory Reset

I hope this article was helpful and now you can easily Delete a Folder or File using Command Prompt (CMD), but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Kako prebrojati datoteke u mapi koristeći PowerShell, CMD ili File Explorer

• Pronađite podatke o vlasništvu nad datotekama i mapama pomoću naredbenog retka

• Očistite međuspremnik pomoću naredbenog retka ili prečaca

• Zamijenite Powershell naredbenom linijom u izborniku Start sustava Windows 10

• Zamijenite PowerShell naredbenim redkom u kontekstualnom izborniku u sustavu Windows 10

• Otvorite naredbeni redak u mapi pomoću Windows Explorera

• Što je naredbeni redak (CMD)?

• Kako stvoriti više mapa odjednom -

• Kako otvoriti naredbeni redak pri pokretanju sustava Windows 10

• Napredni naredbeni redak ili CMD trikovi za Windows 10

• Popis tipkovničkih prečaca CMD ili naredbenog retka u sustavu Windows 11/10

• Kako otvoriti aplikacije Microsoft Store iz naredbenog retka

• Omogućite ili onemogućite naslijeđenu konzolu za naredbeni redak i PowerShell u sustavu Windows 10

• Koji je model moje računalo, prijenosno računalo ili tablet sa sustavom Windows 10? 8 načina da saznate -

• Prečaci za UEFI BIOS i Windows 10 okruženje za oporavak

• Naredbeni redak (CMD) - 8 mrežnih naredbi koje biste trebali znati

• Kako otvoriti preglednik Edge pomoću naredbenog retka u sustavu Windows 10

• Kako izbrisati povijest pretraživanja File Explorera

• Kako deinstalirati program pomoću naredbenog retka u sustavu Windows 11/10

• Promjena veličine međuspremnika zaslona naredbenog retka i razine transparentnosti