Ako se susrećete s problemima s računalom sa sustavom Windows 11 ili Windows 10 i vi ili OS odlučite pokrenuti popravak pri pokretanju –^{(Startup Repair –)} a ako popravak pri pokretanju^{(Startup Repair)} ne uspije, možete dobiti zaslon sa sljedećom porukom – Automatski popravak pri pokretanju nije mogao popraviti vaše računalo^{(Automatic Startup Repair couldn’t repair your PC)} . Cijela poruka o pogrešci glasi ovako:

Automatic Startup Repair couldn’t repair your PC . Press “Advanced options” to try other options to repair your PC or “Shut Down” to turn off your PC. Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

Kako popraviti Automatski popravak pri pokretanju^{(Automatic Startup Repair)} nije mogao popraviti vaše računalo

Ako dođete u ovu situaciju, evo nekoliko stvari koje možete isprobati. Prvo^(Please) prođite kroz cijeli popis, a zatim odlučite koji se od prijedloga može primijeniti u vašem slučaju i koji od ovih želite isprobati:

1. Ponovo izgradite BCD i popravite MBR
2. Pokrenite chkdsk
3. Pokrenite SFC^{(Run SFC)} i upotrijebite DISM alat^{(Use DISM Tool)} u sigurnom načinu rada^{(Safe Mode)}
4. Onemogućite zaštitu od zlonamjernog softvera od ranog pokretanja
5. Onemogućite automatski popravak pri pokretanju
6. Vratite registar iz RegBack direktorija
7. Resetirajte ovo računalo.

Prije nego počnete provjeravati ovu datoteku dnevnika, mogla bi vam dati ideju o uzroku pogreške:

C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

Što je datoteka SrtTrail.txt?

SrtTrail.txt je datoteka zapisnika koja bilježi uzroke koji su mogli uzrokovati neuspjeh automatskog popravka^{(Automatic Startup Repair)} pri pokretanju ili uzrokovati grešku zaustavljanja plavog zaslona^{(Blue SCreen Stop Error)} . Nalazi se na adresi C:WindowsSystem32LogfilesSrt SrtTrail.txt . SrtTrail.txt ne uzrokuje plave zaslone^{(Blue Screens)} – to je samo datoteka dnevnika koja bilježi probleme u svrhu rješavanja problema.

1] Ponovo izgradite BCD i popravite MBR

Morate ponovno izgraditi datoteku s podacima o konfiguraciji pokretanja^{(rebuild the Boot Configuration Data)} i popraviti datoteku glavnog zapisa za pokretanje^{(repair the Master Boot Record)} . Da biste to učinili, kliknite Napredne opcije^{(Advanced Options)} , a zatim odaberite Naredbeni redak^{(Command Prompt)} . Nakon toga, vaš sustav će tražiti lozinku. Nakon što ga unesete, na zaslonu ćete pronaći naredbeni redak. Unesite jednu po jednu sljedeće naredbe -

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

Ove naredbe će riješiti probleme sa sektorom pokretanja . ^{(Boot Sector)}Nakon što pokrenete ove naredbe, provjerite možete li normalno pokrenuti ili ne.

2] Pokrenite chkdsk

Provjera diska^(Disk) na greške bi mogla biti dobra ideja. Stoga ponovno otvorite prozore naredbenog retka^{(Command Prompt)} kao što je gore objašnjeno i pokrenite sljedeću naredbu i pogledajte hoće li to pomoći:

chkdsk /r c:

Za vašu informaciju, naredba će skenirati i riješiti probleme samo vašeg C pogona.

3] Pokrenite SFC^{(Run SFC)} i DISM alat^{(DISM Tool)} u sigurnom načinu rada^{(Safe Mode)}

Pokrenite Windows 10 u sigurnom načinu rada,^{(Boot Windows 10 in Safe Mode,)} otvorite naredbeni redak s administratorskim privilegijama^{(Command Prompt with administrator privilege,)} i prvo pokrenite SFC

Zatim pokrenite DISM da popravite sliku sustava^{(Run DISM to repair the System Image)} :

DISM /Online /Cleanup-Image /RestoreHealth

Ova će naredba koristiti alat Deployment Imaging and Servicing Management za skeniranje mogućeg oštećenja. Za vašu informaciju, ovoj naredbi treba neko vrijeme da se pokrene pa nemojte zatvarati prozor.

Povezano^(Related) : Verzija operativnog sustava nije kompatibilna s Popravkom pri pokretanju^{(The operating system version is incompatible with Startup Repair)} .

4] Onemogućite^{(Disable Early)} zaštitu od zlonamjernog softvera od ranog pokretanja

Ako ste se suočili s ovim problemima nakon instaliranja programa protiv zlonamjernog softvera, ovo rješenje će to riješiti. Nakon što kliknete na Napredne^(Advanced) opcije, kliknite na Troubleshoot > Advanced opcije > Postavke pokretanja^{(Startup Settings)} .

Na stranici Postavke pokretanja^{(Startup Settings)} pritisnite gumb Restart .

Prilikom ponovnog pokretanja vidjet ćete ovaj zaslon. Morate pritisnuti tipku '8' na tipkovnici da odaberete Onemogući postavku zaštite od ranog pokretanja protiv zlonamjernog softvera^{(Disable early launch anti-malware protection setting)} .

Vaš sustav će to pokrenuti za nekoliko trenutaka.

5] Onemogućite automatski popravak pri pokretanju

Kada imate problem s pogonom sustava, prozor za popravak^{(Automatic Startup Repair)} automatskog pokretanja automatski se otvara tijekom pokretanja. Ako mislite da ste u takvoj situaciji, možete onemogućiti automatski popravak pri pokretanju^{(Startup Repair)} . Morate kliknuti na Troubleshoot > Advanced options > Command Prompt i izvršiti sljedeću naredbu:

bcdedit /set recoveryenabled NO

Ponovo pokrenite računalo i pogledajte.

Povezano^(Related) : Popravak automatskog pokretanja sustava Windows ne radi^{(Windows Automatic Startup Repair not working)} .

6] Vratite^(Restore) registar iz RegBack direktorija

Ponekad pogrešna vrijednost registra može stvoriti ovaj problem. Provjerite pomaže li vam vraćanje registra. Da biste to učinili, otvorite naredbeni redak^{(Command Prompt)} iz Naprednih opcija^{(Advanced options)} i izvršite sljedeću naredbu -

copy c:\windows\system32\config\RegBack\* c:\windows\system32\config

Bit ćete upitani želite li prebrisati sve datoteke ili djelomično. Trebali biste upisati sve^(All) i pritisnuti tipku Enter . Nakon toga morate ponovno pokrenuti računalo i provjeriti ostaje li problem ili ne.

7] Resetirajte ovo računalo

Ova opcija u Windows 11/10 pomaže korisnicima da dobiju tvorničke postavke bez uklanjanja osobnih datoteka. Koristite opciju Reset this PC u izborniku Troubleshoot kao posljednju opciju.

Postoji nekoliko drugih stvari koje možete isprobati, a one su zapravo povezane s vašim hardverom.^{(There are a few other things you could try, and these are related to your hardware actually.)}

• Isključite i ponovno spojite tvrdi disk
• Ponovno spojite RAM
• Isključite sve vanjske uređaje.

Kako zaobići automatski popravak u sustavu Windows^(Windows) ?

Da biste zaobišli automatski popravak u Windows 11/10 , otvorite naredbeni redak^{(Command Prompt)} , upišite bcdedit /set {default} recoveryenabled No i pritisnite Enter . Zatim ponovno pokrenite računalo. Automatski popravak pri pokretanju^{(Startup Repair)} trebao bi biti onemogućen i možda ćete ponovno moći pristupiti Windows 11/10 .

Što se događa kada popravak pokretanja sustava Windows ne uspije^{(Windows Startup Repair Fails)} ?

Ako popravak pokretanja Windows 11/10 ne uspije^{(Startup Repair Fails)} , sljedeća opcija je da pokušate upotrijebiti instalacijski medij za Windows 11/10 da biste popravili pokretanje. Morat ćete unijeti skup naredbi u naredbeni redak^{(Command Prompt)} da biste pronašli i riješili probleme koji bi mogli spriječiti pokretanje vašeg računala.

All the best!

Povezano čitanje^{(Related read)} : Popravak automatskog pokretanja sustava Windows nije uspio.^{(Windows Automatic Startup Repair failed.)}

Automatic Startup Repair couldn't repair your PC in Windows 11/10

If you are facing problems with your Windоws 11 оr Windowѕ 10 computer and you or the OS decides to run Startup Repair – and if Startυp Repair fails then you may receive a screen with the following message – Automatic Startup Repair couldn’t repair your PC. The full error message reads like this:

Automatic Startup Repair couldn’t repair your PC . Press “Advanced options” to try other options to repair your PC or “Shut Down” to turn off your PC. Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

How to fix Automatic Startup Repair couldn’t repair your PC

If you get into this situation here are a few things you could try. Please go through the entire list first and then decide which of the suggestions may apply in your case and which of these you would like to try:

1. Rebuild BCD & Repair MBR
2. Run chkdsk
3. Run SFC and Use DISM Tool in Safe Mode
4. Disable Early launch anti-malware protection
5. Disable Automatic Startup Repair
6. Restore registry from RegBack directory
7. Reset This PC.

Before you begin checking this log file could give you an idea of the error cause:

C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

What is the SrtTrail.txt file?

SrtTrail.txt is a log file that logs down causes that may have caused Automatic Startup Repair to fail or cause a Blue SCreen Stop Error. It is located at C:\Windows\System32\Logfiles\Srt\SrtTrail.txt. SrtTrail.txt does not cause Blue Screens – it is merely a log file that records issues for troubleshooting purposes.

1] Rebuild BCD & Repair MBR

You need to rebuild the Boot Configuration Data file and repair the Master Boot Record file. To do this, click on the Advanced Options and then select Command Prompt. Following that, your system will ask for the password. After entering it, you will find the command prompt right on your screen. Enter the following commands one by one-

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

These commands will fix Boot Sector problems. After running these commands, check whether you can start normally or not.

2] Run chkdsk

Checking the Disk for errors might be a good idea. So again open the Command Prompt windows as explained above and run the following command and see if that helps:

chkdsk /r c:

For your information, the command will scan and fix the problems of your C drive only.

3] Run SFC and DISM Tool in Safe Mode

Boot Windows 10 in Safe Mode, open Command Prompt with administrator privilege, and first Run SFC

Then Run DISM to repair the System Image:

DISM /Online /Cleanup-Image /RestoreHealth

This command will use the Deployment Imaging and Servicing Management tool to scan for possible corruption. For your information, this command takes a while to run so do not close the window.

Related: The operating system version is incompatible with Startup Repair.

4] Disable Early launch anti-malware protection

If you have been facing these problems after installing an anti-malware program, this solution will fix it. After clicking on Advanced options, click on Troubleshoot > Advanced options > Startup Settings.

On the Startup Settings page, hit the Restart button.

You will on restart see this screen. You need to press the ‘8’ key on your keyboard to select Disable early launch anti-malware protection setting.

Your system will start that within moments.

5] Disable Automatic Startup Repair

When you have a system drive related issue, the Automatic Startup Repair window opens up automatically during boot. If you think you are in such a situation, you can disable automatic Startup Repair. You need to click on Troubleshoot > Advanced options > Command Prompt and execute the following command:

bcdedit /set recoveryenabled NO

Restart your computer and see.

Related: Windows Automatic Startup Repair not working.

6] Restore registry from RegBack directory

Sometimes, a wrong registry value can create this problem. See if restoring the registry helps you. To do this open the Command Prompt from Advanced options, and execute the following command-

copy c:\windows\system32\config\RegBack\* c:\windows\system32\config

You will be asked whether you want to overwrite all files or partially. You should type All and hit the Enter button. Following that, you need to restart your computer and check whether the problem remains or not.

7] Reset this PC

This option in Windows 11/10 helps users get factory settings without removing any personal files. Use the Reset this PC option in Troubleshoot menu as the last option.

There are a few other things you could try, and these are related to your hardware actually.

• Unplug and reconnect the hard drive
• Reconnect RAM
• Unplug all external devices.

How do I bypass automatic repair on Windows?

To bypass automatic repair on Windows 11/10, open Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter. Then, restart your PC. The Automatic Startup Repair should be disabled and you might be able to access Windows 11/10 again.

What happens when Windows Startup Repair Fails?

If Windows 11/10 Startup Repair Fails, then your next option is to try using your Windows 11/10 installation media to fix the boot. You will need to enter a set of commands in Command Prompt to find and resolve issues that might be preventing your computer from booting.

All the best!

Related read: Windows Automatic Startup Repair failed.

Related posts

• Popravak automatskog popravka pri pokretanju koji ne radi u sustavu Windows 11/10

• Kako izvesti automatski popravak pri pokretanju u sustavu Windows 11/10

• Pogreška pri pozivu udaljene procedure tijekom korištenja DISM-a u sustavu Windows 11/10

• Verzija operativnog sustava nije kompatibilna s popravkom pri pokretanju

• Usluga inteligentnog prijenosa u pozadini ne radi u sustavu Windows 11/10

• Izbornik Start se ne otvara ili gumb Start ne radi u sustavu Windows 11/10

• Pokrenite DISM Offline da popravite sigurnosnu kopiju slike sustava Windows 11/10

• Snimke zaslona se ne spremaju u mapu Slike u sustavu Windows 11/10

• Microsoft Office Click-To-Run Visoka upotreba CPU-a u sustavu Windows 11/10

• Protokol za prijenos medija (MTP) ne radi u sustavu Windows 11/10

• Kako riješiti probleme s WiFi-om u sustavu Windows 11/10

• Ponovno izgradite datoteku Tokens.dat ili Activation Tokens u sustavu Windows 11/10

• Upravitelj uređaja je prazan i ne prikazuje ništa u sustavu Windows 11/10

• HDMI audio uređaj se ne prikazuje u sustavu Windows 11/10

• Kako riješiti probleme s performansama u sustavu Windows 11/10

• Windows ne može dobiti mrežne postavke s usmjerivača u sustavu Windows 11/10

• Izbrisani pisač se stalno pojavljuje i vraća u sustavu Windows 11/10

• Windows Audio Service ne radi u sustavu Windows 11/10

• Pogreška Missing Operating System Not Found u sustavu Windows 11/10

• Vaša je organizacija isključila automatska ažuriranja u sustavu Windows 11/10